Search NASA⌕ Search

SEARCH · Search NASA

Results for “CPC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Rapid measurement of sub-micrometer aerosol size distribution using a fast integrated mobility spectrometer

We present rapid measurement of submicron particle size distributions enables the characterization of aerosols with fast changing properties, and is often necessary for measurements onboard mobile platforms (e.g., research aircraft). Aerosol mobility size distribution is commonly measured by a scanning mobility particle sizer (SMPS), which relies on voltage scanning or stepping to classify particles of different sizes, and may take up to several minutes to obtain a complete size spectrum of aerosol particles. The recently developed fast integrated mobility spectrometer (FIMS) with enhanced dynamic size range classifies and detects particles from 10 to ~600 nm simultaneously, allowing submicron aerosol mobility size distributions to be captured at a time resolution of 1 second. In this study, we present a detailed data inversion routine for deriving aerosol size distribution from FIMS measurements. The inversion routine takes into consideration the FIMS transfer function, particle penetration efficiency in the FIMS, and multiple charging of aerosols. The accuracy of the FIMS measurement is demonstrated by comparing parallel FIMS and SMPS measurements of stable aerosols with a wide range of size spectrum shapes, including ambient aerosols and aerosols classified by a differential mobility analyzer (DMA). The FIMS and SMPS-derived size distributions show excellent agreements for all aerosols tested. In addition, total number concentrations of ambient aerosols were integrated from 1 Hz FIMS size distributions, and compared with those directly measured by a condensation particle counter (CPC) operated in parallel. Finally, the integrated and measured total particle concentrations agree well within 5%.

54 ENVIRONMENTAL SCIENCES↗

Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions

New comparative tests on two different types of solar collectors are presented in this paper. A standard glazed flat plate collector and an evacuated tube collector are installed in parallel and tested at the same working conditions; the evacuated collector is a direct flow through type with external compound parabolic concentrator (CPC) reflectors. Efficiency in steady-state and quasi-dynamic conditions is measured following the standard and it is compared with the input/output curves measured for the whole day. The first purpose of the present work is the comparison of results in steady-state and quasi-dynamic test methods both for flat plate and evacuated tube collectors. Besides this, the objective is to characterize and to compare the daily energy performance of these two types of collectors. An effective mean for describing and analyzing the daily performance is the so called input/output diagram, in which the collected solar energy is plotted against the daily incident solar radiation. Test runs have been performed in several conditions to reproduce different conventional uses (hot water, space heating, solar cooling). Results are also presented in terms of daily efficiency versus daily average reduced temperature difference: this allows to represent the comparative characteristics of the two collectors when operating under variable conditions, especially with wide range of incidence angles. (author)

14 SOLAR ENERGY↗

Products and substrate/template usage of vaccinia virus DNA primase

Vaccinia virus encodes a 90-kDa protein conserved in all poxviruses, with DNA primase and nucleoside triphosphatase activities. DNA primase products, synthesized with a single stranded {phi}X174 DNA template, were resolved as dinucleotides and long RNAs on denaturing polyacrylamide and agarose gels. Following phosphatase treatment, the dinucleotides GpC and ApC in a 4:1 ratio were identified by nearest neighbor analysis in which {sup 32}P was transferred from [{alpha}-{sup 32}P]CTP to initiating purine nucleotides. Differences in the nucleotide binding sites for initiation and elongation were suggested by the absence of CpC and UpC dinucleotides as well as the inability of deoxynucleotides to mediate primer synthesis despite their incorporation into mixed RNA/DNA primers. Strong primase activity was detected with an oligo(dC) template. However, there was only weak activity with an oligo(dT) template and none with oligo(dA) or oligo(dG). The absence of stringent template specificity is consistent with a role for the enzyme in priming DNA synthesis at the replication fork.

60 APPLIED LIFE SCIENCES↗

In vivo and in vitro study of osteogenic potency of endothelin-1 on bone marrow-derived mesenchymal stem cells

Bone marrow-derived mesenchymal stem cells (BMSCs) are a major source of osteoblasts and are crucial for bone remolding and repair and thus they are widely used for tissue engineering applications. Tissue engineering in combination with gene therapy is considered as a promising approach in new bone regeneration. Endothelin-1(EDN-1)is produced by vascular endothelial cells which plays an important role during bone development. However, its role in BMSCs remains largely unknown. We established EDN-1 overexpressed BMSCs, proliferation ability and osteogenesis differentiation were detected respectively. Transduced BMSCs were then combined with CPC-scaffold to repair calvarial defects in rats to evaluate the in-vivo osteogenic potential of EDN-1. EDN-1 overexpressed BMSCs showed increased proliferation and significantly increased osteogenesis potential ability than vector transfected control. The in-vivo data also revealed more new bone formation with higher bone mineral density and number of trabeculae in EDN-1 overexpressed BMSCs. These findings have demonstrated the influence of EDN-1 on differentiation potential of BMSCs, which suggest that EDN-1 may be a new promising agent for bone tissue engineering. - Highlights: • Endothelin-1 can promote osteogenesis differentiation of BMSCs both in vivo and in vitro. • Endothelin-1 can enhance proliferation of BMSCs. • Endothelin-1 paly an important role in bone tissue regeneration and may be applied in repairing bone defects in the future.

60 APPLIED LIFE SCIENCES↗

Electrocatalytic Ammonia Oxidation Mediated by a Polypyridyl Iron Catalyst

Electrocatalytic ammonia oxidation (AO) mediated by iron(II) tris(2-pyridylmethyl)amine (TPA) bis-ammine triflate, [(TPA)Fe(NH 3 ) 2 ]OTf 2 , is reported. Interest in (electro)catalytic AO is growing rapidly, and this report adds a first-row transition metal (iron) complex to the known Ru catalysts recently reported. The featured system is well behaved and has been studied in detail by electrochemical methods. Cyclic voltammetry experiments in the presence of ammonia indicate an onset potential corresponding to ammonia oxidation at 0.7 V vs Fc/Fc + . Controlled potential coulometry (CPC) at an applied bias of 1.1 V confirms the generation of 16 equiv of N 2 with a Faradaic efficiency for N 2 of ~80%. Employing 15 NH 3 yields exclusively 30 N 2 , demonstrating the conversion of ammonia to N 2 . A suite of electrochemical studies is consistent with an initial EC step that generates an Fe III –NH 2 intermediate (at 0.4 V) followed by an anodically shifted catalytic wave. The data indicate a rate-determining step that is first order in both [Fe] and [NH 3 ] and point to a fast catalytic rate (k obs ) of ~10 7 M –1 ·s –1 as computed by foot of the wave analysis (FOWA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidative Catalytic Fractionation of Lignocellulosic Biomass Using a Co-N-P-C Catalyst and One-Step Isolation of Aromatic Monomers via Centrifugal Partition Chromatography

Methods for catalytic fractionation of biomass provide a means to convert lignin directly into monomers while generating a high-quality cellulosic stream, contrasting conventional biomass pretreatment strategies that prioritize the cellulosic fraction. Here, a nonprecious-metal Co-N-P-C catalyst is identified for aerobic oxidative catalytic fractionation (OCF) of poplar feedstock in dimethyl carbonate that achieves significantly higher yields of aromatic monomers (24 wt %) relative to those obtained with a recently reported Co-N-C catalyst in acetone solvent (15 wt %). Mechanistic studies indicate that the acidic properties of the catalyst contribute to its improved performance by promoting extraction of lignin from insoluble polysaccharides. This OCF process is complemented by the development of a new centrifugal partition chromatography (CPC) method that supports isolation of all five major aromatic monomers (syringic acid, syringaldehyde, vanillic acid, vanillin, and para-hydroxybenzoic acid) in a single liquid–liquid extraction purification step. Furthermore, this OCF/CPC sequence has important implications for future lignin valorization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coal-Filler-Based Thermoplastic Composites as Construction Materials: A New Sustainable End-Use Application

This paper investigates coal’s viability as an alternative filler to wood flour in Wood Plastic Composites (WPCs) – a class of materials used in building applications in lieu of pressure-treated wood. Coal Plastic Composites (CPCs) were fabricat-ed with 15 – 60 wt.% coal combined with high density polyethylene and their physical (mechanical, water absorption and metal leaching) and chemical (oxidative degradation and flammability) properties were compared with commercial WPCs. In addition, mass and energy balances (10 tonne/hr basis) and life cycle analyses (60 wt.% filler and 1 tonne ba-sis) were conducted on CPCs and WPCs to assess environmental impact during manufacturing. At 60 wt.%, CPCs had a higher flexural strength, slower oxidative degradation and burn rate, and lower water absorption in comparison to com-mercial WPCs, suggesting better performance and stability in building applications. Furthermore, CPC manufacturing showed 44% lower greenhouse gas emissions and 62% less energy usage in comparison with WPC. These results indi-cate that direct utilization of coal as a filler in construction composite applications may yield lower cost products with lower associated emissions and energy demand compared to existing WPC materials, potentially yielding a more sustain-able end-use for coal than current uses such as power production.

Coal Plastic Composites, Wood Plastic Composites, ↗

Mechanical Consequences of Molecular Composition on Failure in Polyolefin Composites Containing Glassy, Elastomeric, and Semicrystalline Components

In order to gain insights into the mechanisms of deformation and ultimate failure in a homologous series of lamellae-forming polyolefin block copolymers comprised of glassy poly(cyclohexylethylene) (C), elastomeric poly(ethylene-alt-propylene) (P), and semicrystalline poly(ethylene) (E), the anisotropic tensile properties of samples in which the microphase separate structure is oriented on a macroscopic length scale were probed. Reciprocating shear processing of monodisperse CPCPC and CPEPC-{xi} polymers having mass fraction w{sub c} 0.39--0.44 and 0 {<=} {xi} {<=} 1, where {xi} = w{sub E}/(w{sub E} + w{sub P}), produces 'single-grain' polymer samples with perpendicular-oriented lamellae. Tensile deformation studies in which the strain axis coincides with the lamellar normal direction yield varied mechanical responses ranging from brittle fracture for CEC ({xi} = 0) to ductile behavior for CPEPC ({xi} > 0) and CPCPC. Tandem small- and wide-angle X-ray scattering analysis of samples undergoing deformation shows that application of strain along the lamellar normal in the CPEPC materials results in formation of a folded lamellar structure or 'chevron' morpohology within which the E crystals cant relative to the strain direction. Since the ultimate failure mechanism for materials strained in this direction is chain pullout in the glassy domains, a simple mechanical model applied to the data enables quantitation of the stress required for chain pullout at {approx}4 MPa. Additionally, the mechanical properties of miscible blends of CEC and CPC polymers with matched segregation strengths are shown to mimic those of the covalently linked CPEPC pentablock copolymer.

36 MATERIALS SCIENCE↗

Scaling analysis of bio-molecular dynamics derived from elastic incoherent neutron scattering experiments

Numerous neutron scattering studies of bio-molecular dynamics employ a qualitative analysis of elastic scattering data and atomic mean square displacements. We provide a new quantitative approach showing that the intensity at zero energy exchange can be a rich source of information of bio-structural fluctuations on a pico- to nano-second time scale. Elastic intensity scans performed either as a function of the temperature (back-scattering) and/or by varying the instrumental resolution (time of flight spectroscopy) yield the activation parameters of molecular motions and the approximate structural correlation function in the time domain. The two methods are unified by a scaling function, which depends on the ratio of correlation time and instrumental resolution time. The elastic scattering concept is illustrated with a dynamic characterization of alanine-dipeptide, protein hydration water, and water-coupled protein motions of lysozyme, per-deuterated c-phycocyanin (CPC) and hydrated myoglobin. The complete elastic scattering function versus temperature, momentum exchange, and instrumental resolution is analyzed instead of focusing on a single cross-over temperature of mean square displacements at the apparent onset temperature of an-harmonic motions. Our method predicts the protein dynamical transition (PDT) at T{sub d} from the collective (α) structural relaxation rates of the solvation shell as input. By contrast, the secondary (β) relaxation enhances the amplitude of fast local motions in the vicinity of the glass temperature T{sub g}. The PDT is specified by step function in the elastic intensity leading from elastic to viscoelastic dynamic behavior at a transition temperature T{sub d}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma expansion and relativistic filamentation in intense laser-irradiated cone targets

We report that compound parabolic concentrator (CPC) cone targets have been shown to produce increased MeV photons on the NIF-ARC by 10× over flat targets. Multiple x-ray frames can potentially be generated by firing the NIF-ARC's beamlets into distinct cone targets at few nanosecond relative delays. This requires that the cone targets with delayed beams are not degraded by their proximity to previous targets. One concern is that the spatial wings of a beam fired into one target can fall on neighboring targets, producing a preformed plasma that may interfere with laser light reaching the tip of the cone. In this work, 3D hydra simulations of realistic targets and beam parameters show that hundreds of micrometer scale length preplasmas are produced in cones within 1 mm of the laser spot. 2D particle-in-cell simulations of the intense main pulse in this preplasma indicate a density threshold for the onset of relativistic filamentation in our conditions. Applying our modeling approach to a NIF-ARC shot with an intentional 15 J prepulse yields good agreement with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First Measurements of Neutral Atmospheric Cluster and 1–2 nm Particle Number Size Distributions During Nucleation Events

Recent observations throughout the atmosphere have shown that nucleation occurs frequently (Kulmala et al. 2004). Modeling studies and observations have shown that nucleated particles contribute significantly to concentrations of cloud condensation nuclei (Spracklen et al. 2008), thereby affecting climate (IPCC 2007). Size-resolved measurements extending down to molecular dimensions can provide information on processes that lead to nucleation and would enable development and verification of theories for particle nucleation and growth in the atmosphere and other aerosol systems. This article describes measurements of the complete number size distribution, spanning the size range from vapor molecules and molecular clusters to submicrometer particles, during atmospheric nucleation events. The measurements used two new instruments, the cluster chemical ionization mass spectrometer (Cluster CIMS) and the DEG SMPS. The Cluster CIMS measures neutral molecular clusters from 50 to 900 amu. The DEG SMPS is a scanning mobility particle spectrometer (SMPS) equipped with a diethylene glycol (DEG)-based condensation particle counter (CPC) capable of 1.1 nm mobility diameter particle detection, and overlapping the sizes detected by the Cluster CIMS (Iida et al. 2009; Jiang et al. 2011). The Cluster CIMS distinguishes neutral clusters from ions formed by ion-induced clustering by varying the reaction time for ions with the sampled air (Zhao et al. 2010). It distinguishes clusters from high molecular weight gases by measuring the incremental signal at a specified mass detected during nucleation events. The clusters that were measured in this study contain sulfuric acid, which is known to participate in atmospheric nucleation (Kuang et al. 2008).

54 ENVIRONMENTAL SCIENCES↗

Electrical Mobility Spectrometer Using a Diethylene Glycol Condensation Particle Counter for Measurement of Aerosol Size Distributions Down to 1 nm

We report a new scanning mobility particle spectrometer (SMPS) for measuring number size distributions of particles down to {approx}1 nm mobility diameter. This SMPS includes an aerosol charger, a TSI 3085 nano differential mobility analyzer (nanoDMA), an ultrafine condensation particle counter (UCPC) using diethylene glycol (DEG) as the working fluid, and a conventional butanol CPC (the 'booster') to detect the small droplets leaving the DEG UCPC. The response of the DEG UCPC to negatively charged sodium chloride particles with mobility diameters ranging from 1-6 nm was measured. The sensitivity of the DEG UCPC to particle composition was also studied by comparing its response to positively charged 1.47 and 1.70 nm tetra-alkyl ammonium ions, sodium chloride, and silver particles. A high resolution differential mobility analyzer was used to generate the test particles. These results show that the response of this UCPC to sub-2 nm particles is sensitive to particle composition. The applicability of the new SMPS for atmospheric measurement was demonstrated during the Nucleation and Cloud Condensation Nuclei (NCCN) field campaign (Atlanta, Georgia, summer 2009). We operated the instrument at saturator and condenser temperatures that allowed the efficient detection of sodium chloride particles but not of air ions having the same mobility. We found that particles as small as 1 nm were detected during nucleation events but not at other times. Factors affecting size distribution measurements, including aerosol charging in the 1-10 nm size range, are discussed. For the charger used in this study, bipolar charging was found to be more effective for sub-2 nm particles than unipolar charging. No ion induced nucleation inside the charger was observed during the NCCN campaign.

54 ENVIRONMENTAL SCIENCES↗

On the validity of the Poisson assumption in sampling nanometer-sized aerosols

A Poisson process is traditionally believed to apply to the sampling of aerosols. For a constant aerosol concentration, it is assumed that a Poisson process describes the fluctuation in the measured concentration because aerosols are stochastically distributed in space. Recent studies, however, have shown that sampling of micrometer-sized aerosols has non-Poissonian behavior with positive correlations. The validity of the Poisson assumption for nanometer-sized aerosols has not been examined and thus was tested in this study. Its validity was tested for four particle sizes - 10 nm, 25 nm, 50 nm and 100 nm - by sampling from indoor air with a DMA- CPC setup to obtain a time series of particle counts. Five metrics were calculated from the data: pair-correlation function (PCF), time-averaged PCF, coefficient of variation, probability of measuring a concentration at least 25% greater than average, and posterior distributions from Bayesian inference. To identify departures from Poissonian behavior, these metrics were also calculated for 1,000 computer-generated Poisson time series with the same mean as the experimental data. For nearly all comparisons, the experimental data fell within the range of 80% of the Poisson-simulation values. Essentially, the metrics for the experimental data were indistinguishable from a simulated Poisson process. The greater influence of Brownian motion for nanometer-sized aerosols may explain the Poissonian behavior observed for smaller aerosols. Although the Poisson assumption was found to be valid in this study, it must be carefully applied as the results here do not definitively prove applicability in all sampling situations.

concentration measurement↗

Detection efficiency of a water condensation particle counter using electrically neutral sulfuric acid and sulfuric acid-dimethylamine clusters

Recent advances in condensation particle counters (CPCs) have improved the detection of sub-3 nm particles, increasing the accuracy of new particle formation (NPF) measurements. However, the detection efficiencies for neutrally charged, atmospherically relevant, sub-1 nm particles, which are critical for the accurate derivation of atmospheric NPF rates, are currently unknown. Here, this study presents a method to measure the detection efficiency of sulfuric acid and clusters of sulfuric acid and dimethylamine using measured CPC concentrations and modeled cluster distributions at atmospherically relevant concentrations. This study finds that water-based CPCs can measure these clusters at detection efficiencies relevant to NPF studies.

Cheng, Darren [Carnegie Mellon Univ., Pittsburgh, ↗

Localized modes in defect-free two-dimensional circular photonic crystals

The localization of electromagnetic waves in defect-free circular photonic crystals (CPCs) is investigated using a multiple-scattering method. It is shown that electromagnetic waves of certain freqencies are localized in some special regions inside a perfect CPC with a high order of rotational symmetry. Localized modes with a high Q factor, greater than 10{sup 6}, are obtained. In particular, some unique localized modes such as circular modes and localized modes for both polarized waves are found in the present system, which are completely different from those in defect-free photonic quasicrystals and periodic structures. Their physical properties are also analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Framework for Assessing Operational Madden–Julian Oscillation Forecasts: A CLIVAR MJO Working Group Project

The U.S. Climate Variability and Predictability (CLIVAR) MJO Working Group (MJOWG) has taken steps to promote the adoption of a uniform diagnostic and set of skill metrics for analyzing and assessing dynamical forecasts of the MJO. Here we describe the framework and initial implementation of the approach using real-time forecast data from multiple operational numerical weather prediction (NWP) centers. The objectives of this activity are to provide a means to i) quantitatively compare skill of MJO forecasts across operational centers, ii) measure gains in forecast skill over time by a given center and the community as a whole, and iii) facilitate the development of a multimodel forecast of the MJO. The MJO diagnostic is based on extensive deliberations among the MJOWG in conjunction with input from a number of operational centers and makes use of the MJO index of Wheeler and Hendon. This forecast activity has been endorsed by the Working Group on Numerical Experimentation (WGNE), the international body that fosters the development of atmospheric models for NWP and climate studies. The Climate Prediction Center (CPC) within the National Centers for Environmental Prediction (NCEP) is hosting the acquisition of the forecast data, application of the MJO diagnostic, and real-time display of the standardized forecasts. The activity has contributed to the production of 1–2-week operational outlooks at NCEP and activities at other centers. Further enhancements of the diagnostic's implementation, including more extensive analysis, comparison, illustration, and verification of the contributions from the participating centers, will increase the usefulness and application of these forecasts and potentially lead to more skillful predictions of the MJO and indirectly extratropical and other weather variability (e.g., tropical cyclones) influenced by the MJO. The purpose of this article is to inform the larger scientific and operational forecast communities of the MJOWG forecast effort and invite participation from additional operational centers.

58 GEOSCIENCES↗

Evaluation of CMIP5 Model Precipitation Using PERSIANN-CDR

Abstract The purpose of this study is to use the PERSIANN–Climate Data Record (PERSIANN-CDR) dataset to evaluate the ability of 32 CMIP5 models in capturing the behavior of daily extreme precipitation estimates globally. The daily long-term historical global PERSIANN-CDR allows for a global investigation of eight precipitation indices that is unattainable with other datasets. Quantitative comparisons against CPC daily gauge; GPCP One-Degree Daily (GPCP1DD); and TRMM 3B42, version 7 (3B42V7), datasets show the credibility of PERSIANN-CDR to be used as the reference data for global evaluation of CMIP5 models. This work uniquely defines different study regions by partitioning global land areas into 25 groups based on continent and climate zone type. Results show that model performance in warm temperate and equatorial regions in capturing daily extreme precipitation behavior is largely mixed in terms of index RMSE and correlation, suggesting that these regions may benefit from weighted model averaging schemes or model selection as opposed to simple model averaging. The three driest climate regions (snow, polar, and arid) exhibit high correlations and low RMSE values when compared against PERSIANN-CDR estimates, with the exceptions of the cold regions showing an inability to capture the 95th and 99th percentile annual total precipitation characteristics. A comprehensive assessment of each model’s performance in each continent–climate zone defined group is provided as a guide for both model developers to target regions and processes that are not yet fully captured in certain climate types, and for climate model output users to be able to select the models and/or the study areas that may best fit their applications of interest.

Nguyen, Phu↗