Search NASA⌕ Search

SEARCH · Search NASA

Results for “CUTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Mitigation of EMU Cut Glove Hazard from Micrometeoroid and Orbital Debris Impacts on ISS Handrails

Recent cut damages sustained on crewmember gloves during extravehicular activity (ISS) onboard the International Space Station (ISS) have been caused by contact with sharp edges or a pinch point according to analysis of the damages. One potential source are protruding sharp edged crater lips from micrometeoroid and orbital debris (MMOD) impacts on metallic handrails along EVA translation paths. A number of hypervelocity impact tests were performed on ISS handrails, and found that mm-sized projectiles were capable of inducing crater lip heights two orders of magnitude above the minimum value for glove abrasion concerns. Two techniques were evaluated for mitigating the cut glove hazard of MMOD impacts on ISS handrails: flexible overwraps which act to limit contact between crewmember gloves and impact sites, and; alternate materials which form less hazardous impact crater profiles. In parallel with redesign efforts to increase the cut resilience of EMU gloves, the modifications to ISS handrails evaluated in this study provide the means to significantly reduce cut glove risk from MMOD impact craters

Ryan, Shannon↗

Device for Automated Cutting and Transfer of Plant Shoots

A device that enables the automated cutting and transfer of plant shoots is undergoing development for use in the propagation of plants in a nursery or laboratory. At present, it is standard practice for a human technician to use a knife and forceps to cut, separate, and grasp a plant shoot. The great advantage offered by the present device is that its design and operation are simpler than would be those of a device based on the manual cutting/separation/grasping procedure. [The present device should not be confused with a prior device developed for partly the same purpose and described in Compliant Gripper for a Robotic Manipulator (NPO-21104), NASA Tech Briefs, Vol. 27, No. 3 (March 2003), page 59.]. The device (see figure) includes a circular tube sharpened at its open (lower) end and mounted on a robotic manipulator at its closed (upper) end. The robotic manipulator simply pushes the sharpened open end of the tube down onto a bed of plants and rotates a few degrees clockwise then counterclockwise about the vertical axis, causing the tube to cut a cylindrical plug of plant material. Exploiting the natural friction between the tube and plug, the tube retains the plug, without need for a gripping mechanism and control. The robotic manipulator then retracts the tube, translates it to a new location over a plant-growth tray, and inserts the tube part way into the growth medium at this location in the tray. A short burst of compressed air is admitted to the upper end of the tube to eject the plug of plant material and drive it into the growth medium. A prototype has been tested and verified to function substantially as intended. It is projected that in the fully developed robotic plant-propagation system, the robot control system would include a machine- vision subsystem that would automatically guide the robotic manipulator in choosing the positions from which to cut plugs of plant material. Planned further development efforts also include more testing and refinement of the design and operation described above.

Cipra, Raymond↗

Calculating and Mitigating the Risk of a Cut Glove to a Space Walking Astronaut

One of the high risk operations on the International Space Station (ISS) is conducting a space walk, or an Extra Vehicular Activity (EVA). Threats to the space walking crew include airlock failures, space suit failures, and strikes from micro ]meteoroids and orbital debris (MM/OD). There are risks of becoming untethered from the space station, being pinched between the robotic arm and a piece of equipment, tearing your suit on a sharp edge, and other human errors that can be catastrophic. For decades NASA identified and tried to control sharp edges on external structure and equipment by design; however a new and unexpected source of sharp edges has since become apparent. Until recently, one of the underappreciated environmental risks was damage to EVA gloves during a spacewalk. The ISS has some elements which have been flying in the environment of space for over 14 years. It has and continues to be bombarded with MM/OD strikes that have created small, sharp craters all over the structure, including the dedicated EVA handrails and surrounding structure. These craters are capable of cutting through several layers of the EVA gloves. Starting in 2006, five EVA crewmembers reported cuts in their gloves so large they rendered the gloves unusable and in some cases cut the spacewalk short for the safety of the crew. This new hazard took engineers and managers by surprise. NASA has set out to mitigate this risk to safety and operations by redesigning the spacesuit gloves to be more resilient and designing a clamp to isolate MM/OD strikes on handrails, and is considering the necessity of an additional tool to repair strikes on non ]handrail surfaces (such as a file). This paper will address how the ISS Risk Team quantified an estimate of the MM/OD damage to the ISS, and the resulting likelihood of sustaining a cut glove in order to measure the effectiveness of the solutions being investigated to mitigate this risk to the mission and crew.

Castillo, Theresa↗

AC Loss Reduction in Filamentized YBCO Coated Conductors with Virtual Transverse Cross-cuts

While the performance of YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO)-based coated conductors under dc currents has improved significantly in recent years, filamentization is being investigated as a technique to reduce ac loss so that the 2nd generation (2G) high temperature superconducting (HTS) wires can also be utilized in various ac power applications such as cables, transformers and fault current limiters. Experimental studies have shown that simply filamentizing the superconducting layer is not effective enough to reduce ac loss because of incomplete flux penetration in between the filaments as the length of the tape increases. To introduce flux penetration in between the filaments more uniformly and further reduce the ac loss, virtual transverse cross-cuts were made in superconducting filaments of the coated conductors fabricated using the metal organic chemical vapor deposition (MOCVD) method. The virtual transverse cross-cuts were formed by making cross-cuts (17 - 120 {micro}m wide) on the IBAD (ion beam assisted deposition)-MgO templates using laser scribing followed by depositing the superconducting layer ({approx} 0.6 {micro}m thick). AC losses were measured and compared for filamentized conductors with and without the cross-cuts under applied peak ac fields up to 100 mT. The results were analyzed to evaluate the efficacy of filament decoupling and the feasibility of using this method to achieve ac loss reduction.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Surface dimpling on rotating work piece using rotation cutting tool

A combined method of machining and applying a surface texture to a work piece and a tool assembly that is capable of machining and applying a surface texture to a work piece are disclosed. The disclosed method includes machining portions of an outer or inner surface of a work piece. The method also includes rotating the work piece in front of a rotating cutting tool and engaging the outer surface of the work piece with the rotating cutting tool to cut dimples in the outer surface of the work piece. The disclosed tool assembly includes a rotating cutting tool coupled to an end of a rotational machining device, such as a lathe. The same tool assembly can be used to both machine the work piece and apply a surface texture to the work piece without unloading the work piece from the tool assembly.

36 MATERIALS SCIENCE↗

Measuring, Cutting and Sorting Irradiated Control Rods to Limit the Volume of Intermediate Level Long-lived Waste - 17001

During operation, the PWR control rods are either completely extracted (scram or safety rods) or partially inserted in the operating zone of the core (fine control or operating rods). At the nominal rating conditions or close to them, the operating zone is limited to some steps of insertion in the order of a few tens of cm. In fact, only the lower part of the control rods are subjected to a significant neutron flux with an impact on the neutron activation and so on the waste classification (Low Level Short-lived Waste versus Intermediate Level Long-lived Waste). Our calculative as well as experimental experience confirms the significant presence of radionuclides in the control rods, but only in the lower parts. Measuring, cutting and finally sorting control rod scraps can reduce the volume of Intermediate Level Long-lived Waste planned for our storage deposit facility. This paper presents the EDF/DP2D methodologies followed to determine the sort criteria between the Low Level Short-lived Waste versus the Intermediate Level Long-lived Waste zones for the Silver-Indium-Cadmium control rods. The irradiated control rods are stored in cases without their head. Each case can contain several control rods, and the cases are stored under water in the fuel assembly pool. To calculate the radioactive inventories, we have developed a calculation scheme which is composed of a 3-dimensional mapping of the neutron flux, a calculation of the evolution of the isotopic compositions under neutron flux and finally a comparison between calculated and measured values. The main hypotheses of the control rods calculation take into account: - 3-dimensional geometry and 3-dimensional neutron sources distribution, - the isotopic compositions including impurities, - the history of irradiation resulting mainly from the daily power production, the positions of the control rods in the loading patterns and the positions in the axial operating zone. In order to validate the calculations, measurements were made 20 meters under water in the fuel assembly pool. The experimental results show the presence of many gamma emitter radionuclides. Only Ag-108m was retained for validating the calculations. This is due to the fact that silver is considered as the 'standard' chemical element for our control rods and silver produces Ag-108m which is a long-lived gamma emitter radionuclide. The analysis of the calculated results and the measured values allow us to build a simplified physics model for the simulation of the control rods activation. Finally three sort criteria can be proposed: - Without measurement devices, the sorting is based on an empirical sort criterion. Cuttings must then be made on the 2 back-ends of the control rod pins. This option is due to the difficulty in knowing the orientation of the pins in the storage cases. The cutting lines are placed at approximately 1 m from the 2 back-ends of the pins. This approach does not allow a great optimization of the sorting, less than 50% of the length of the control rods can be saved from Intermediate Level Long-lived Waste storage. - With a simple dose rate measurement device, the knowledge of the orientation of the pins in the storage cases allows us to limit cuttings to the lower part of the control rods. Depending on the 'top to tail' cases, between approximately 50% and 75% of the length of the control rods can be saved from Intermediate Level Long-lived Waste storage. - With an accurate measurement device, the sorting can be based on a specific activity of Ag-108m. Over 4400 Bq/g of Ag-108m (corresponding to the Intermediate Level Long-lived Waste limit), the control rod pieces can be considered as a long-lived waste. The measurements must be made over the 2 back-ends of control rod pins to examine the cases of 'top to tail' storage. This approach allows a great optimization of the sorting. Depending on the history of irradiation, more than 75% of the length of the control rods can be saved from Intermediate Level Long-lived Waste storage. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Applicability of Laser Cutting and Decontamination Technologies for Remote Decommissioning Work - 16115

Recently, various cutting and decontamination technologies for remote decommissioning works have been developed and applied. One of the technologies is a laser technology which has good capabilities for such kinds of works. Remote controllability is one of advantages of a laser system. Because in general the laser head is light and compact compared to the other types of cutting and decontamination tools, the head can be easily handled by remote operation equipment such as manipulators, and thus it gives an effective and flexible remote work. As the other examples of the advantages, there are no parts of a laser system necessary to be replaced so frequently like blades of mechanical methods and also, it does not generate secondary waste so much like contaminated water generated from water jet methods. Additionally, recent laser technology development has increased laser output power which makes it possible to be able to cut thick steel plate more smoothly and speedy, and width of laser irradiation which makes it possible to perform an efficient surface decontamination work. This paper will provide outline of the remote laser cutting system and decontamination system developed by IHI Corporation (IHI) and how those technologies are effective in various kinds of remote decommissioning works. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Size Reduction of Contaminated Magnox Pond Skips Using Laser Cutting - 16192

Magnox and TWI Ltd (TWI) have recently developed a first-of-a-kind automated remote laser cutting facility. The facility has been commissioned at Hinkley Point 'A' (HPA) nuclear power station and used to successfully demonstrate the capability of TWI's laser cutting technology to remotely size reduce contaminated Intermediate Level Waste (ILW) Magnox pond skips. The benefits of the facility include reduced cutting times, significantly reduced dose uptake, and significant cost savings. The facility has been designed with a 'plug-and-play' approach such that it could be de-planted and re-mobilised to another nuclear site for other applications. Three contaminated ILW Magnox pond skips with activities of 10.3, 25.1 and 218 GBq/t have been successfully size reduced with this facility; with less than 2.5 hours required to size reduce one skip, and the elapsed laser cutting time being less than 40 minutes. Subsequent radiological assessment showed that the surface contamination and airborne activity were confined within a specifically designed modular containment unit. Continuous real-time air monitoring results indicated a rapid rise and fall of airborne activity. The largest proportion of the airborne activity was removed from the modular containment within 10 minutes by local HEPA ventilation, with the residual activity taking approximately one hour to settle out entirely. The measured dose uptakes were mostly associated with manual handling of the skips to and from the size reduction facility, thus indicating the significance of an automated remote skip size reduction facility. This paper describes the design and performance of the laser skip size reduction facility and presents results of the radiological assessment for three contaminated skips with varying activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluating Quantity of Decommissioning Waste by Cutting Virtual 3D Objects in Large Equipment - 19111

Equipment and piping components contaminated by radioactive materials and/or including irradiated materials as low-level wastes must be cut, segmented, and packed in waste containers. There is a trade-off between cost and exposure dose when packing waste fragments into containers, if the fragments are cut into small sizes, although the number of containers becomes less than the number of larger fragments, the cutting work hours and exposure dose would increase. To avoid excess exposure dose and minimize number of waste containers for many pieces of equipment and piping components, an automatic planning method for virtual cutting of 3D equipment objects under the constraints of container sizes, maximum radioactivity, maximum weight, and maximum dose rate was developed. It was confirmed that the developed method effectively evaluates size, weight, and amount of radioactivity in each container automatically. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Measuring multiple residual-stress components using the contour method and multiple cuts

The conventional contour method determines one component of stress over the cross section of a part. The part is cut into two, the contour of the exposed surface is measured, and Bueckner's superposition principle is analytically applied to calculate stresses. In this paper, the contour method is extended to the measurement of multiple stress components by making multiple cuts with subsequent applications of superposition. The theory and limitations are described. The theory is experimentally tested on a 316L stainless steel disk with residual stresses induced by plastically indenting the central portion of the disk. The stress results are validated against independent measurements using neutron diffraction. The theory has implications beyond just multiple cuts. The contour method measurements and calculations for the first cut reveal how the residual stresses have changed throughout the part. Subsequent measurements of partially relaxed stresses by other techniques, such as laboratory x-rays, hole drilling, or neutron or synchrotron diffraction, can be superimposed back to the original state of the body.

36 MATERIALS SCIENCE↗

Structural state scale-dependent physical characteristics and endurance of cermet composite for cutting metal

A structural-phase state developed on the surface of a TiC/Ni–Cr–Al cermet alloy under superfast heating and cooling produced by pulse electron beam melting has been presented. The effect of the surface’s structural state multimodality on the temperature dependencies of the friction and endurance of the cermet tool in cutting metal has been investigated. The high-energy flux treatment of subsurface layers by electron beam pulses in argon-containing gas discharge plasma serves to improve the endurance of metal cutting tools manifold (by a factor of 6), to reduce the friction via precipitation of secondary 200 nm carbides in binder interlayers. It is possible to improve the cermet tool endurance for cutting metal by a factor of 10–12 by irradiating the cermet in a reactive nitrogen-containing atmosphere with the ensuing precipitation of nanosize 50 nm AlN particles in the binder interlayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Foundations for high-order, conservative cut-cell methods: Stable discretizations on degenerate meshes

Cut-cell methods for unsteady flow problems can greatly simplify the grid generation process and allow for high-fidelity simulations on complex geometries. However, cut-cell methods have been limited to low orders of accuracy. This is driven, largely, by the variety of procedures typically introduced to evaluate derivatives in a stable manner near the highly irregular embedded geometry. Here, a completely new approach, termed TEMO (truncation error matching and optimization), is taken to solve this problem. The approach is based on two simple and intuitive design principles. These principles directly allow for the construction of stable 8th To the best of the authors' knowledge, these are the highest orders ever achieved for a cut-cell discretization by a significant margin. This is done for both explicit and compact finite differences and is accomplished without any geometric transformations or artificial stabilization procedures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Machinability comparison of additively manufactured and traditionally wrought Ti-6Al-4V alloys using single-point cutting

Post-machining is often needed to provide high dimensional accuracy and fine surface finish for additively manufactured Ti-6Al-4V (Ti64). The material inhomogeneity, such as pores and microstructures, can affect the machining behavior of this already difficult-machine alloy. This study adopts a holistic approach to compare the machinability of additively manufactured and traditionally wrought Ti64 in terms of key machining factors, including forces, temperature, and vibration and the major machining outcomes including tool life, surface finish, and dimensional accuracy. Stress-relief annealing is applied to each of the part conditions as a secondary variable to observe the additional effects. The results show that AM is not particularly more difficult to machine in terms of cutting force and temperature, but it creates high cutting vibrations across a wide range of frequencies (to and over 5 kHz). The high vibrations do not lead to worse surface finish or dimensional accuracy but tend to worsen the tool life by chipping off the cutting edge. The vibration can be attributed to the brittle martensitic microstructure found in additively manufactured Ti64, which is also evidenced by the more serrated chips. Stress-relieving is found to change the microstructure and reduce the level of vibration to that of the wrought counterpart.

36 MATERIALS SCIENCE↗

On relaxations of the max k -cut problem formulations

Here, a tight continuous relaxation is a crucial factor in solving mixed integer formulations of many NP-hard combinatorial optimization problems. The (weighted) max k-cut problem is a fundamental combinatorial optimization problem with multiple notorious mixed integer optimization formulations. In this paper, we explore four existing mixed integer optimization formulations of the max k-cut problem. Specifically, we show that the continuous relaxation of a binary quadratic optimization formulation of the problem is: (i) stronger than the continuous relaxation of two mixed integer linear optimization formulations and (ii) at least as strong as the continuous relaxation of a mixed integer semidefinite optimization formulation. We also conduct a set of experiments on multiple sets of instances of the max k-cut problem using state-of-the-art solvers that empirically confirm the theoretical results in item (i). Furthermore, these numerical results illustrate the advances in the efficiency of global non-convex quadratic optimization solvers and more general mixed integer nonlinear optimization solvers. As a result, these solvers provide a promising option to solve combinatorial optimization problems. Our codes and data are available on GitHub.

97 MATHEMATICS AND COMPUTING↗

Micropillar compression response of femtosecond laser-cut single crystal Cu and proton irradiated Cu

Femtosecond laser cutting has been used to fabricate micro- and mesoscale specimens for mechanical testing, but the impact on mechanical properties has not been fully evaluated. Micropillars of assorted sizes were fabricated in a single crystal Cu specimen and Cu irradiated to 1.4 peak displacements per atom using a femtosecond laser cutting system followed by focused ion beam milling to a final dimension of 7 μm x 7 μm x 12 μm. Microcompression testing showed that removing 5 μm of material from the laser cut surface in both specimens resulted in similar behavior to purely focused ion beam milled micropillars.

36 MATERIALS SCIENCE↗

The Contribution of Regge Cuts on {pi}{sup 0} Photoproduction from Complex Nuclei within 4 to 12 GeV

The contribution of Regge cuts on the incoherent {pi}{sup 0} photoproduction cross section from complex nuclei is investigated at forward angles within 4 to 12 GeV. The calculations are performed using two different parameterizations (with and without Regge cuts) for the elementary photoproduction cross section and the multi-collisional intranuclear cascade model (MCMC) to address the nuclear effects. The results indicate that the influence of the Regge cuts is negligible and the nuclear cross section (shape and magnitude) is strongly constrained by short range correlations and meson-nucleus Final State Interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental optimisation of the gas-assisted laser cutting of thick steel sheets

We report on the experimental optimisation of the oxygen-assisted CO{sub 2} laser cutting of low-carbon sheet steel 5 to 25 mm in thickness. It is shown that the cut edge roughness is minimal when the energy input per unit volume of the material removed and the incident beam power per unit sheet thickness remain constant at {approx}20 J mm{sup -3} and {approx}200 W mm{sup -1}, respectively, over the entire range of sheet thicknesses examined. The corresponding Peclet number is Pe = 0.5. These results can be used to determine the optimal beam power and cutting speed for a particular sheet thickness. At sufficiently large thicknesses, the conditions that ensure the minimum roughness can be written in the form of relations between nondimensional parameters. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CRISPR-Cas “Non-Target” Sites Inhibit On-Target Cutting Rates

CRISPR-Cas systems have become ubiquitous for genome editing in eukaryotic as well as bacterial systems. Cas9 forms a complex with a guide RNA (gRNA) and searches DNA for a matching sequence (target site) next to a protospacer adjacent motif (PAM). Once found, Cas9 cuts the DNA. Cas9 is revolutionary for the ability to change the RNA sequence and target a new site easily. However, while algorithms have been developed to predict gRNA-specific Cas9 activity, a fundamental biological understanding of gRNA-specific activity is lacking. Here, the number of PAM sites in the genome is effectively a large pool of inhibitory substrates, competing with the target site for the Cas9/gRNA complex. We demonstrate that increasing the number of non-target sites for a given gRNA reduces on-target activity in a dose-dependent manner. Furthermore, we show that the use of Cas9 mutants with increased PAM specificity toward a smaller subset of PAMs (or smaller pool of competitive substrates) improves cutting rates, while increased PAM promiscuity decreases cutting rates. Decreasing the potential search space by increasing PAM specificity provides a path toward improving on-target activity for slower high-fidelity Cas9 variants. Engineering improved PAM specificity to reduce the competitive search space offers an alternative strategy to engineer Cas9 variants with increased specificity and maintained on-target activity.

24 POWER TRANSMISSION AND DISTRIBUTION↗