Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cl(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Theoretical study of CH 3 Cl-N 2 line shapes in the ν 1 band. Line mixing effects in QR doublets and QQ k sub-branches

Line coupling and line mixing effects of CH 3 Cl lines in the ν 1 band perturbed by N 2 have been investigated. We have taken into account the non-diagonality of the exp(–S 2 ) operator within specified line spaces as well as the k-degeneracy of the transitions (due to the double degeneracy of the j,k levels with k ≠ 0). These transitions should be considered as doublets coupled by the line mixing process. A new problem appears in the calculation when the atom-atom potential model is introduced. In order to overcome this difficulty, a pragmatic approach is proposed. Comparisons of theoretically calculated matrix elements of W with measurements of QR(j,k) doublets as well as some QQ k sub-branches, which are strongly affected by line mixing, have been made. Finally, the results show that the formalism improved in this way leads to rather accurate predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Restructuring of Benzimidazole-Based Copper Complexes during Electrochemical CO 2 Reduction

Copper-based molecular catalysts have been widely used for the electrochemical reduction of carbon dioxide (ERCO 2 ). However, establishing a correlation between structure and catalytic performance has been challenging due to the dynamic nature of these materials under ERCO 2 working conditions. Here, we report on the restructuring of the copper complexes [Cu(bzimpy)Cl 2 ] and [Cu(pyrben) 2 (NO 3 )]NO 3 during ERCO 2 in an acidic medium, evidencing its effects on the observed activity, selectivity, and stability. In situ X-ray absorption spectroscopy (XAS) suggested that, at sufficiently negative potentials, the Cu 2+ centers of both complexes are reduced to undercoordinated Cu 0 species. Pb underpotential deposition of post-ERCO 2 samples indicated that such Cu 0 species also present a dominant contribution of the (100) domain, which is in line with the high Faradaic efficiency toward C 2 products (∼45%) shown by both complexes at −1.24 V vs RHE. By combining online electrochemical mass spectrometry, in situ XAS, electron paramagnetic resonance (EPR), and quantitative product analysis, we found that [Cu(bzimpy)Cl 2 ] exhibits a partially reversible restructuring, regenerating the main complex moiety, [Cu(bzimpy)] 2+ , and its geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Low-power anisotropic molecular electronic memristors

A molecular electronic memristor, programmable resistive memory device, promises to revolutionize next-generation flexible data storage units, offering fast, dense and ultralow power solutions. Here we report anisotropic resistive switching in molecular κ-(BEDT-TTF) 2 Cu[N(CN) 2 ]Cl memristors, consisting of alternatively segregated bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) and Cu[N(CN) 2 ]Cl layers. Electron resistance switching behavior controlled by charge tunneling in molecular memristors show a low set voltage of 0.5 V (10 V/cm) with the ON/OFF ratio of 2.3×10 3 along a-axis and a high-level endurance of 1.25×10 4 cycles along all axes. Finally, the findings of such molecular electronic crystals promise for low-power data storage memristors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis, structure, electronic characterization, and halogenation of gold(III) phlorin complexes

The metalation chemistry of the phlorin, which is a non-aromatic tetrapyrrole macrocycle containing a single sp 3 -hybridized meso-carbon has remained underdeveloped, as compared to that of more traditional tetrapyrroles such as porphyrins, corroles and phthalocyanines. There have been few prior efforts to prepare metallophlorins, and those that have been reported have relied on either reduction or nucleophilic attack of parent metalloporphyrins, rather than direct metalation of freebase phlorin constructs. In this work, an alternate synthetic approach for preparation of gold(III) phlorin complexes that involves the first direct metalation of two different freebase phlorin derivatives (3H(Phl tBu ) and 3H(Phl F )) with AuBr 3 to produce the stable and fully isolable gold(III) phlorin complexes Au(Phl tBu ) and Au(Phl F ) is reported. The first structural characterization of a metallophlorin bearing geminal dimethyl substituents at the sp 3 -hybridized meso-carbon via X-ray crystallography is also reported. In addition to the preparation of Au(Phl tBu ) and Au(Phl F ), the UV-vis absorption and redox properties of these two gold(III) phlorins in comparison to those of their freebase homologues is also detailed. Notably, the metallophlorins are characterized by panchromatic absorbance profiles and intense and broad bands that span the long-visible and into the near-IR regions, as well as two fully reversible oxidation and reduction waves as probed by cyclic voltammetry. Lastly, the chlorination of Au(Phl tBu ) using PhI(Cl 2 ) was probed and it was found that this regioslective reaction generates monochlorinated (Au(Phl tBu Cl)) and dichlorinated (Au(Phl tBu Cl 2 )) products, which were both structurally characterized by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cleavable quaternary oxychlorides with high magnetic ordering temperatures

Quaternary oxychlorides derived from Ruddlesden–Popper 3d transition metal oxides offer a route to cleavable crystals with bulk antiferromagnetic ordering temperatures reaching at least 550 K. Here, we study the magnetic, optical, and mechanical behavior of Sr 2 FeO 3 Cl, Ca 2 FeO 3 Cl, Ca 3 Fe 2 O 5 Cl 2 , and Sr 3 Fe 2 O 5 Cl 2 . Through optical absorption measurements, we show that these antiferromagnetic semiconductors have optical band gaps of ≈2.1(1) eV. The magnetic ordering symmetries and temperatures were probed by neutron powder diffraction and Mössbauer spectroscopy on polycrystalline samples, demonstrating Néel temperatures (T N ) near room temperature in the single layer Sr 2 FeO 3 Cl (T N ≈ 311 K) and Ca 2 FeO 3 Cl (T N ≈ 360 K), and the double-layer compound Sr 3 Fe 2 O 5 Cl 2 has T N ≈ 545 K. The high-spin moments of Fe 3+ lie within the basal plane and the magnetic structures are compensated within each magnetic layer and characterized by magnetic propagation vectors k = ($\frac{1}{2}$ $\frac{1}{2}$ 0). Magnetization results demonstrate the quasi-2D nature of the magnetism, with a broad maximum in the susceptibility near 2T N for Sr 2 FeO 3 Cl. Scotch tape tests and mechanical exfoliation onto SiO 2 confirm the micaceous nature of these crystals with cleavage down to a single unit cell (two magnetic layers) achieved for Sr 3 Fe 2 O 5 Cl 2 . In conclusion, this paper highlights strong antiferromagnetic interactions, semiconducting band gaps, and cleavability of quaternary Fe-based oxychlorides and motivates future work on crystals and exfoliated flakes of these and related oxyhalide systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deep potential molecular dynamics simulations of low-temperature plasma-surface interactions

Machine learning approaches to potential generation for molecular dynamics (MD) simulations of low-temperature plasma-surface interactions could greatly extend the range of chemical systems that can be modeled. Empirical potentials are difficult to generalize to complex combinations of multiple elements with interactions that might include covalent, ionic, and metallic bonds. This work demonstrates that a specific machine learning approach, Deep Potential Molecular Dynamics (DeepMD), can generate potentials that provide a good model of plasma etching in the Si-Cl-Ar system. Comparisons are made between MD results using DeepMD models and empirical potentials, as well as experimental measurements. Pure Si properties predicted by the DeepMD model are in reasonable agreement with experimental results. Simulations of Si bombardment by Ar + ions demonstrate the ability of the DeepMD method to predict sputtering yields as well as the depth of the amorphous-crystalline interface. Etch yields as a function of flux ratio and ion energy for simultaneous Cl 2 and Ar + impacts are in good agreement with previous simulation results and experiment. Predictions of etch yields and etch products during plasma-assisted atomic layer etching of Si-Cl 2 -Ar are shown to be in good agreement with MD predictions using empirical potentials and with experiment. Finally, good agreement was also seen with measurements for the spontaneous etching of Si by Cl atoms at 300 K. Further, the demonstration that DeepMD can reproduce results from MD simulations using empirical potentials is a necessary condition to future efforts to extend the method to a much wider range of systems for which empirical potentials may be difficult or impossible to obtain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Midlatitude Ozone Depletion and Air Quality Impacts from Industrial Halogen Emissions in the Great Salt Lake Basin

We report aircraft observations of extreme levels of HCl and the dihalogens Cl 2 , Br 2 , and BrCl in an industrial plume near the Great Salt Lake, Utah. Complete depletion of O 3 was observed concurrently with halogen enhancements as a direct result of photochemically produced halogen radicals. Observed fluxes for Cl 2 , HCl, and NO x agreed with facility-reported emissions inventories. Bromine emissions are not required to be reported in the inventory, but are estimated as 173 Mg year –1 Br 2 and 949 Mg year –1 BrCl, representing a major uncounted oxidant source. A zero-dimensional photochemical box model reproduced the observed O 3 depletions and demonstrated that bromine radical cycling was principally responsible for the rapid O 3 depletion. Inclusion of observed halogen emissions in both the box model and a 3D chemical model showed significant increases in oxidants and particulate matter (PM 2.5 ) in the populated regions of the Great Salt Lake Basin, where winter PM 2.5 is among the most severe air quality issues in the U.S. The model shows regional PM 2.5 increases of 10%–25% attributable to this single industrial halogen source, demonstrating the impact of underreported industrial bromine emissions on oxidation sources and air quality within a major urban area of the western U.S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-energy and low-cost membrane-free chlorine flow battery

Abstract Grid-scale energy storage is essential for reliable electricity transmission and renewable energy integration. Redox flow batteries (RFB) provide affordable and scalable solutions for stationary energy storage. However, most of the current RFB chemistries are based on expensive transition metal ions or synthetic organics. Here, we report a reversible chlorine redox flow battery starting from the electrolysis of aqueous NaCl electrolyte and the as-produced Cl 2 is extracted and stored in the carbon tetrachloride (CCl 4 ) or mineral spirit flow. The immiscibility between the CCl 4 or mineral spirit and NaCl electrolyte enables a membrane-free design with an energy efficiency of >91% at 10 mA/cm 2 and an energy density of 125.7 Wh/L. The chlorine flow battery can meet the stringent price and reliability target for stationary energy storage with the inherently low-cost active materials (~$5/kWh) and the highly reversible Cl 2 /Cl − redox reaction.

25 ENERGY STORAGE↗
DOE OSTI2021

Impact of carrier wafer on etch rate, selectivity, morphology, and passivation during GaN plasma etching

The choice of carrier wafer was found to significantly influence etch rates, selectivity, and morphology in GaN micropillar etching in a Cl 2 -Ar high-density inductively coupled plasma. 7 × 7 mm 2 GaN on sapphire chips with a plasma-enhanced chemical vapor deposition SiO 2 hard mask was etched on top of 4-in. fused silica, silicon carbide, silicon, sapphire, aluminum nitride, and high purity aluminum carriers. Silicon and silicon carbide carriers reduced GaN:SiO 2 selectivity because incidental SiCl x and CCl x etch products from the carriers attack the SiO 2 mask. Aluminum nitride and high-purity aluminum carriers yielded the highest GaN:SiO 2 selectivities due to the deposition of Al-based etched by-products, while the highest GaN etch rate was achieved using the sapphire carrier since it was the most inert carrier and did not sink any Cl 2 . Overall, results indicate that SiO 2 and Al may be used as passivation materials during GaN etching, as vertical profiles were achieved when SiO 2 or Al is redeposited from the fused silica and aluminum carriers, respectively. Floor pitting, trenching, sidewall roughness, and faceting were all influenced by carrier wafer type and will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Nd(II) and Nd(III) Ions on the Speciation and Kinetic Dynamics of Radiolytic Transients in Molten LiCl-KCl Eutectic Salt Mixtures

In the pyrochemical reprocessing of used nuclear fuel, understanding the effects of ionizing radiation on the chemical behavior of fission products in molten chloride eutectic salt is crucial. Here, this study investigates the impact of radiation on the chemical and kinetic speciation of Nd ions in molten LiCl-KCl eutectic, which are challenging to separate due to their multivalent oxidation states and comproportionation reactions. Electron pulse radiolysis techniques were used to determine transient absorption spectra, chemical kinetics, and activation parameters for the reaction of Nd ions with the primary products of molten LiCl-KCl eutectic radiolysis: the solvated electron (e S - ) and dichlorine radical anion (Cl 2 •- ). Initially, Nd(III) reacted rapidly with e S - , forming Nd(II) with a second-order rate coefficient of k = (4.54 ± 0.07) × 10 10 M -1 s -1 at 673 K. The resulting Nd(II) ions then reacted slowly with Cl 2 •- , regenerating Nd(III) with an estimated rate of k = (1.72 ± 0.04) × 10 10 M -1 s -1 at 673 K. Additionally, the comproportionation reaction of Nd(III) and Nd(s) to form Nd(II) was monitored chemically and electrochemically. This work suggests that the comproportionation reaction of Nd(III) with Nd(s) to form Nd(II) is unstable in molten LiCl-KCl eutectic.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**

Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.

Cavedon, Cristian↗
DOE OSTI2022

Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**

Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Pressure-induced ferroelectric-like transition creates a polar metal in defect antiperovskites Hg3Te2X2 (X = Cl, Br)

Abstract Ferroelectricity is typically suppressed under hydrostatic compression because the short-range repulsions, which favor the nonpolar phase, increase more rapidly than the long-range interactions, which prefer the ferroelectric phase. Here, based on single-crystal X-ray diffraction and density-functional theory, we provide evidence of a ferroelectric-like transition from phase I 2 1 3 to R 3 induced by pressure in two isostructural defect antiperovskites Hg 3 Te 2 Cl 2 (15.5 GPa) and Hg 3 Te 2 Br 2 (17.5 GPa). First-principles calculations show that this transition is attributed to pressure-induced softening of the infrared phonon mode Γ 4 , similar to the archetypal ferroelectric material BaTiO 3 at ambient pressure. Additionally, we observe a gradual band-gap closing from ~2.5 eV to metallic-like state of Hg 3 Te 2 Br 2 with an unexpectedly stable R 3 phase even after semiconductor-to-metal transition. This study demonstrates the possibility of emergence of polar metal under pressure in this class of materials and establishes the possibility of pressure-induced ferroelectric-like transition in perovskite-related systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and characterization of the rare-earth chloride complexes with N,N,N',N' -tetramethylmalonamide

Exploration of the solid-state chemistry of the f-elements and their coordination chemistry can assist in understanding the speciation of these elements in solution, which, in turn, can aid in the interpretation of their chemical behavior in complex liquid-liquid separations. Within these separation processes, malonamides are common organic extractants that are used for complexing both lanthanides and actinides, thus it is relevant to understand the malonamide ligand complexation under various conditions. In this work, we investigate solid-state complexes of the rare-earth chlorides with N,N,N',N' -tetramethylmalonamide (TMMA) across the entire lanthanide series. Here, we isolated two structural families of compounds Ln(TMMA) 2 Cl 3 Ln = La–Dy and [Ln(TMMA) 2 (H 2 O) 4 ]Cl 3 • x H 2 O x = 0,4 Ln = Ho–Lu, showing differences in chloride coordination from the inner-sphere complex for early lanthanides to outer-sphere for the late lanthanides. Both structural series were additionally analyzed by both IR and Raman spectroscopy confirming similarities in malonamide ligand coordination modes, while showing differences in vibrational features associated with chloride and aqua ligand coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A transient site balance model for atomic layer etching

We present a transient site balance model of plasma-assisted atomic layer etching of silicon (Si) with alternating exposure to chlorine gas (Cl 2 ) and argon ions (Ar + ). Molecular dynamics (MD) simulation results are used to provide parameters for the model. The model couples the dynamics of a top monolayer surface region ('top layer') and a perfectly mixed subsurface region ('mixed layer'). The differential equations describing the rates of change of the Cl coverage in the two layers are transient mass balances. Model predictions include Cl coverages and rates of etching of various species from the surface as a function of Cl 2 or Ar + fluence. The simplified phenomenological model reproduces the MD simulation results well over a range of conditions. Comparing model predictions directly to experimental optical emission spectroscopy data, as reported in a previous paper, provides further evidence of the accuracy of the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quasi-one-dimensional Pb 5 Re 3 O 15 : A 5 d realization of the Heisenberg antiferromagnetic spin-1/2 chain

Quasi-one-dimensional (1D) magnetic compounds connect the exact solutions of low-dimensional magnetic geometries, which promise quantum spin liquid behavior and exotic quasiparticles, with real-world materials, in which competing magnetic interactions affect their implementation in quantum information science. Here, the structural determination and quasi-1D magnetic behavior of a previously unreported compound, Pb 5 ⁢Re 3 ⁡O 15 , is presented. Like the anisotropic triangular A 3 ⁢ReO 5 ⁢Cl 2 (A = Ba, Sr, Ca) materials, Pb 5 ⁢Re 3 ⁡O 15 contains [ReO 5 ] square pyramids inserted into anion-centered quasi-two-dimensional layers and hosts spin-1/2 moments on the Re 6+ ions. Pb 5 ⁢Re 3 ⁡O 15 , however, has a more ideal quasi-1D geometry than the A 3 ⁢ReO 5 ⁢Cl 2 materials, with larger interchain distances and interlayer spacing. Quasi-1D magnetic behavior in Pb 5 ⁢Re 3 ⁡O 15 is confirmed by fitting the temperature-dependent magnetic susceptibility with the Bonner-Fisher model for a spin-1/2 antiferromagnetically coupled chain, yielding an intrachain coupling constant of |J|/k B =54.5K. Pb 5 ⁢Re 3 ⁡O 15 is highly insulating at room temperature, and heat capacity data below 10 K reveal a linear-T contribution that suggests the presence of low-temperature spinon excitations. Finally, with a lack of three-dimensional ordering down to at least 0.6 K, Pb 5 ⁢Re 3 ⁡O 15 is proposed as a model system for studying the quantum magnetism of quasi-1D Heisenberg chains in a real-world 5d 1 antiferromagnetic material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Kinetics of Radiation-induced Cr( II ) and Cr( III ) Redox Chemistry in Molten LiCl-KCl Eutectic

Chromium (Cr) is a frequent constituent of the metal alloys proposed for molten salt nuclear reactor (MSR) applications, and is typically the least noble metal ion present. Consequently, chromium is preferentially corroded into molten salt solutions. Here, the redox poise and redox cycling of chromium ions in the salt can greatly influence its corrosivity towards structural alloys, ultimately impacting the longevity of MSR systems. Radiation-induced chemistry is expected to play a significant role in determining the chromium oxidation state distribution during MSR operations. In the present research, electron pulse radiolysis techniques were employed to characterize the reactivity of Cr(II) and Cr(III) ions with primary radiolysis products in molten lithium chloride–potassium chloride (LiCl–KCl) eutectic over a temperature range of 400–600 °C. Both chromium oxidation states were found to rapidly react with the primary products of molten chloride salt radiolysis, i.e., the solvated electron (e S - ) and the dichlorine radical anion (Cl 2 ˙ - ). For reactions with the e S - , second-order rate coefficients (k) of k = (4.1 ± 0.2) and (6.1 ± 0.3) × 10 10 M -1 s -1 at 400 °C for Cr(II) and Cr(III), respectively, were determined. Temperature-dependent measurements allowed for the derivation of activation parameters for electron capture by Cr(II) and Cr(III). Both chromium ions also react with Cl 2 ˙ - , k = (7.2 ± 0.3) and (1.4 ± 0.1) × 10 9 M -1 s -1 at 400 °C for Cr(II) and Cr(III), respectively.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2026

Chlorine Gas as a Lewis Acid–Base Probe for Molten Salts of Divalent Metal Ions

In the context of energy applications for salts and, more specifically, in the case of molten salt reactors, the solvation of corrosion species, the nature and behavior of radiation-produced excess electrons, transient radicals, and molecular gas species all depend on the Lewis acid–base behavior of the constituent salt melt. Speciation of dissolved species and their transport properties are also influenced by the ability of the melt to form networks. This article focuses on the structural properties of melts composed of alkaline earth metal ions coupled with the Cl – anion, and the quantum mechanical behavior of Cl 2 , a typical product of the reaction of radiation-produced chlorine radicals in Cl – -based molten salts. We explore the effect of M 2+ Lewis acidity on chlorobasicity, seen in this work as the availability of Cl – ions to chemically react with Cl 2 to produce Cl 3 – .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗