SEARCH · Search NASA

Results for “Cold working”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Projecting spatiotemporally explicit effects of climate change on stream temperature: A model comparison and implications for coldwater fishes

Conservation planners and resource managers seek information about how the availability and locations of cold-water habitats will change in the future and how these predictions vary among models. In this work, we used a physical process-based model to demonstrate the implications of climate change for streamflow and water temperature in two watersheds with distinctive flow regimes: the Snoqualmie watershed (WA) and Siletz watershed (OR), USA. Our model incorporated a downscaled ensemble of global climate model outputs and was calibrated with in situ and remotely sensed water temperatures. Furthermore, we compared predictions from our processed-based model to those from a publicly available and widely used statistical model. The process-based model projected greater changes in summer maximum water temperatures for the mixed-rain-snow Snoqualmie watershed than for the rain-dominated Siletz watershed as a result of the near-complete loss of winter snowpack and significant reduction in summer flow in the Snoqualmie watershed expected by the 2080s. Both models projected generally similar future spatial patterns of maximum water temperature in the two rivers, with cool reaches distributed farther upstream and fewer in number. However, the process-based model projected higher spatial heterogeneity in water temperature due to our spatially explicit simulation of streamflow and because we calibrated the model with spatially continuous remotely sensed water temperature data. We used stream temperature projections to assess the vulnerability of Pacific salmon and trout to changes in the spatial distribution of cold-water habitats during August by the 2080s. Results suggest that salmonids may have fewer summertime cold-water habitats in both watersheds. Projected stream warming may further limit particular species and life stages, especially in the Snoqualmie watershed. Our comparison of models highlights the importance of considering what might be gained by using a process-based model for evaluating and prioritizing management actions that mitigate climate impacts on cold-water habitats for stream fishes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Forming Complex Nuclear Fuel Shapes in High-Loaded Silicide Surrogates

This work provides proof of the concept that high silicide loading nuclear fuel meat surrogates with complicated geometries can be produced with uniform density through an application of cold isostatic pressing (CIP). Dispersion fuels with high volumetric loading of U_3 Si_2 have challenges in fabrication. Fabrication involves a series of processes including powder compaction, rolling pack assembly, and roll forming. PNNL has undertaken extensive experimental work using MoSi2 and WSi2 as surrogates for U3Si2 to explore the feasibility of reducing or eliminating the issues through the application of CIP in the powder pressing step prior to rolling pack assembly. The composites were prepared at >40 vol% silicide loading, which was representative of 4.8 gU/cm^3 and formed via CIP at 50 KSI (Kilopound per Square Inch) pressure. The CIP mold design was taken through a design process which aimed to reduce defects and increase precision. The application of CIP here provides a broad strategy for producing highly loaded dispersion fuels with complex geometries and uniform density.

Clelland, Dustin T.↗

DOE OSTI2021

Numerical Codes for the DESC-LSST Analysis Pipeline: Core Cosmology Library Standard Modules and Beyond wCDM Modules (Final Technical Report)

The overall objective of the project is to investigate and develop specific software modules and analysis components for the software pipeline of LSST Dark Energy Science Collaboration (DESC). Following the key projects of DESC Science Roadmap (SRM), we will write and test computer codes for the Core Cosmology Library (CCL) in order to complete its modules, functionalities, and interface to work with the analysis pipelines from the five science probes of DESC (parts of SRM deliverables CX4.2TJP, CX6.2CS). We will also code modules for CCL to test models beyond w-Cold-Dark-Matter (wCDM) and modification to gravity (MG). Interfaces for MG models will also be developed for the TJPCOSMO software which is the main pipeline of the Theory and Joint Probe (TJP) working group (deliverable TJP2.3). In order to use the full power of LSST data to constrain MG models, we will also work on constraints from nonlinear regime by running and analyzing MG N-Body simulations using a Parameterized-Post-Friedmann framework into the Gadget-2 simulation package (deliverable TJP2.2). Preliminary results for the simulations were obtained in the past. In collaboration with other DESC groups, we plan to make these simulations feedable to cosmic emulators that are practical for likelihood analyzes (deliverable TJP2.2, parts of CX6.2CS). We will also modify and integrate our current codes for consistency tests between data sets and probes into the pipeline (parts of deliverables CX8.2TJP, TJP2.3). We understand that other groups will contribute to some of these objectives but our team will focus and collaborate with others on the particular part of testing MG and models beyond wCDM and refine the DESC pipeline for this purpose. PI has been coordinating his work with the TJP and CS working groups and the DESC management team. PI is a full member of DESC since June 2013. He and his students have been contributing to LSST-DESC activities and work including TJP telecons, collaboration meetings, hack-weeks, and workshops. PI chaired or co-chaired sessions at collaboration meetings and hack-weeks about testing gravity and models beyond wCDM using LSST. He is coordinating the TJP2 projects for testing models beyond wCDM including the writing of DESC-research-note, development of code for pipeline, and N-Body simulations for MG and beyond wCDM models testable with LSST analyses. As stressed in the DESC white paper, SRM, and P5 report, one of the important questions in understanding cosmic acceleration and dark energy is to be able to distinguish whether the acceleration is due to a dark energy component in the universe or a modification to gravity. Answering these questions will have a significant impact on the question of cosmic acceleration and dark energy. The methods that we will use include analytical work, numerical code, and N-Body simulations. A first approach that that we will use consists of using growth rate parameters that enter the perturbed dynamics equations. These parameters take distinctive values for distinct gravity theories and have potential to distinguish between Dark Energy and Modified Gravity. The second method is to look for inconsistencies in Dark Energy parameter spaces using specific combinations of cosmological data sets. Our investigation addresses the Dark Energy problem that is relevant to the mission of the HEP program to understand how our universe works at its most fundamental level. It will allow us to make progress on the HEP mission to explore the nature of Dark Energy and the basic nature of space and time using future surveys such as LSST. The investigation supports the DOE HEP program Cosmic Frontier as it will contribute to the study and understanding of dark energy and fundamental properties of the universe. The investigation contributes directly to LSST-DESC key projects and their deliverables as described in the Science Road-map document to build analysis pipeline and to test dark energy and beyond wCDM models using LSST.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

A high-performance lung-inspired ceramic 3D-printed heat exchanger for high-temperature energy-efficient systems

The thermal-to-electric conversion efficiency of next-generation supercritical carbon dioxide and concentrated solar power plants is significantly augmented by operating at temperatures exceeding 1000 °C if durable, compact, high-temperature heat exchangers (HXs) are developed. Whereas metal 3D-printed HXs fail to operate under extreme temperature conditions, ceramic 3D-printed HXs are deemed promising candidates for high-temperature, highly oxidizing environments. Ceramic 3D-printed HXs, however, exhibit a high gas permeability issue through hot and cold separating walls due to an excessive non-volatile photopolymer content utilized. Here, in this work, a novel leak-free lung-inspired ceramic 3D-printed HX employing a highly complex heat transfer topology is introduced for high-temperature energy-efficient systems. The high permeability issue of ceramic 3D-printed HXs is fully eliminated through a uniform zinc-based coating. It was determined that the effective thermal conductivity of the sintered ceramic heat exchangers is affected by the coated layer. The high-temperature thermal and hydraulic characteristics of the lung-inspired ceramic 3D-printed HX are comprehensively examined and compared against a millichannel 3D-printed HX module. Experimental results indicated that the lung-inspired 3D-printed ceramic HX significantly outperforms its millichannel counterpart. The lung-inspired HX shows a volume-based power density of 8.2 MW/m3 at a hot-side inlet air temperature of 700°C, a 71 % improvement compared with that of the millichannel HX. More importantly, the higher thermal duty of the lung-inspired 3D-printed HX is realized at a lower normalized pressure drop penalty of 510 Pa/W, 22 % lower than that of the millichannel ceramic HX. This study accelerates the advancement of high-performance ceramic 3D-printed HXs with complex topologies for high-temperature energy-efficient systems and/or corrosive environments.

42 ENGINEERING↗

DOE OSTI2022

Effect of processing parameters and build orientation on microstructure and performance of AISI stainless steel 304L made with selective laser melting under different strain rates

Selective laser melting (SLM) process brings diverse potentials on geometry flexibility; therefore, it is more and more widespread to be employed in fabrication metal alloys served for industries. Nonetheless, a material characterization study is desired to carry on for better understanding the correlation among process, structure, microstructure, and performance. In the current study, the SLM fabricated AISI stainless steel 304L was fabricated with different process parameters and built orientations (horizontal, inclined, and vertical. The tensile behavior was evaluated under different strain rates (0.0001 /s, 0.001 /s, 0.01 /s, and 0.1 /s) and compared to the commercial cold-rolled and annealed counterpart. Grain structures, tensile strength, elongation-to-failure, strain rate sensitivity, work hardening, and fractographic analysis were evaluated in terms of the effect of energy density, build orientation, and strain rate. The output indicates the tensile strength increases with increasing strain rates. On the contrary, the elongation-to-failure shows a decreasing trend with strain rates. Tensile properties of specimens built in the horizontal and inclined orientations are more sensitive to strain rates due to the smaller dimension of grain structures. Tensile anisotropy depends on the energy input, where a high energy density could yield a strong build orientation-dependent anisotropy. Hall-Petch relationship is validated to explain the mechanical anisotropy in different built orientations for SLM alloys. The strain hardening exponent and work hardening rate are demonstrated to be positively correlated, and they increase with smaller grain sizes. The fine dimple features indicate the ductile fracture mode regardless of strain rates. The size of the ductile dimples seems to depend on the strain rates and build orientations.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Coupled beam-target-moderator optimization for the Second Target Station

To support the design of the Second Target Station, that aims to provide the world’s highest peak brightness of cold neutrons, studies that optimize the dimensions of the target and moderators are invaluable. In this work, we investigate the influence of the target dimensions and beam profile on the performance and optimal size of the moderators. We perform optimization runs with detailed MCNP6.2 simulations using high-fidelity unstructured mesh geometries generated from parametrized CAD models. We demonstrate that small changes in target height do not influence the moderator performance if the beam dimensions are chosen adequately. We quantify the effect of beam footprint and target width on the moderator performance and show that the optimal moderator dimensions are insensitive to limited changes in target and beam profile.

Dakota↗

DOE OSTI2020

Radiative Cooling of a Superconducting Resonator

Cooling microwave resonators to near the quantum ground state, crucial for their operation in the quantum regime, is typically achieved by direct device refrigeration to a few tens of millikelvin. However, in quantum experiments that require high operation power such as microwave-to-optics quantum transduction, it is desirable to operate at higher temperatures with non-negligible environmental thermal excitations, where larger cooling power is available. In this Letter, we present a radiative cooling protocol to prepare a superconducting microwave mode near its quantum ground state in spite of warm environment temperatures for the resonator. In this proof-of-concept experiment, the mode occupancy of a 10 GHz superconducting resonator thermally anchored at 1.02 K is reduced to 0.44 ± 0.05 from 1.56 by radiatively coupling to a 70 mK cold load. We report this radiative cooling scheme allows high-operation-power microwave experiments to work in the quantum regime, and opens possibilities for routing microwave quantum states to elevated temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Monitoring of Unvented Roofs with Fibrous Insulation, Diffusion Vents, and Interior Vapor Control in a Cold Climate

This research involved construction of a conditioned test hut in a cold climate (Climate Zone 5A) with multiple side-by-side instrumented roof rafter bays. This work examined seven experimental unvented roofs and one code-compliant control hybrid ccSPF-cellulose roof over three winters and following summers. Examined variables included insulation material (fiberglass and cellulose), the presence or absence of a ridge diffusion vent (vapor-open material at the roof ridge to promote drying), the effect of various interior vapor control membranes (fixed and variable permeance), the effect of interior relative humidity, and the effect of interstitial airflow (from the interior into the cavity). This experiment was run over three winters, changing variables of interior conditions, roof configurations/materials, and the addition of intentional air leakage.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

The Effect of Antiphase Boundary Tubes on the Hardness of FeAl

The high work hardening rate unique to ordered intermetallic alloys has long been attributed to antiphase boundary (APB) tubes. In this work, APB tubes are introduced in Fe–40 at. pct Al and Fe–43 at. pct Al by cold-rolling and then removed by annealing. The presence and absence of APB tubes is verified with magnetic measurements. When APB tubes are annealed out the hardness does not change, thus indicating that APB tubes do not contribute to strengthening.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Decoupling the effects of substrate hardness and roughness upon particle adhesion in cold spray

There are two stages of particle adhesion relevant to cold spray: adhesion of the first layer to the substrate, followed by inter-particle adhesion during subsequent deposition. In this work we study the second of these, in which particles strike a previously-deposited layer that is roughened and hardened by prior particle impacts. Specifically, we decouple the effects of surface roughness and hardness on particle adhesion for copper-on-copper impacts. We measure changes to the critical velocity, V cr , in single particle impacts produced by the Laser Induced Particle Impact Test on several surfaces including a cold sprayed surface and a polished version of that surface. We find that increases in both substrate roughness and hardness suppress particle adhesion to higher velocities, indeed in rather equal proportion by ∼10–15% each. This suggests that there is a higher V cr associated with coating build-up (particle-particle bonding) that is overall ∼30% higher than V cr for particle-substrate adhesion.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Experimental measurements and mathematical modeling of cold plate for aviation thermal management

Herein, this study, which has been motivated by the recent applications of the cold plate device in aviation thermal management, reports on physics-based mathematical models derived from the conservation laws of mass, momentum, and energy, and empiricism-based models. One of the objectives of the present work is to report on an elaborate and successful experimental work carried out on an additively manufactured device for the purpose of rigorously validating the numerical predictions. The excellent agreement between the numerical predictions and measured performance provides much needed confidence in the implementation, in the software package, of the offset-strip fin passage correlations, as well as in the software implementation of user-defined wavy fin correlations for aerospace heat exchangers and cold plates operating with ram air at Reynolds numbers below 8000. The contributions of this work can also be found in the development of a new and accurate thermal-hydraulic analysis procedure, referred to in this paper as plate-fin analogy. Results from this procedure are compared with those from thermal resistance network. The comparative study in this paper of the bulk and discrete enthalpy flux method is also new, as is the relative assessment of four off-set strip fin thermal-hydraulic models.

42 ENGINEERING↗

DOE OSTI2026

Pilot Development Progress to Demonstrate Electric Thermal Energy Storage (ETES) Using Low-Cost Particles

The rapid growth of future energy demand increases the need to economically store electrical energy over durations up to several days in long-duration energy storage (LDES) applications. LDES can reduce the grid stress for improving the resilience of the grid. The integration of renewable power and storage has several significant and positive impacts including expanding the renewable energy portion of electricity generation, meeting peak-load demand, and coordinating supply and demand. Several energy storage approaches including mechanical, chemical and electrochemical methods are currently deployed or under development. However, LDES requirements pose unique challenges for scalability, energy capacity, and cost. Thermal energy storage (TES) has the ability to store a large capacity of energy with improved site flexibility compared to incumbent LDES technologies (i.e., pumped hydro) and has attracted significant interest. Our development in TES technology using solid particles as the storage medium has shown feasibility and potential in serving LDES purposes. Particle TES has various advantages over commercialized molten nitrate salt TES and has emerged as a promising storage technology originating from Generation 3 concentrating solar power (CSP) development. Stable, inexpensive silica sand produced in the Midwestern U.S. was identified as a suitable storage medium and has been validated through lab heating and cycling tests. We have successfully developed particle TES for bidirectional electric energy storage to broaden the applications for TES beyond CSP technologies and into standalone electric-thermal energy storage (ETES) systems. Key component designs and performance were verified with prototype testing and model simulations. The ETES system uses high-temperature, low-cost particle thermal energy storage coupled with a unique pressurized fluidized bed heat exchanger that supports a high-efficiency, air-Brayton combined power cycle. At times of low energy demand or high renewable production, an electric particle heater heats large quantities of solid particles to high temperatures in excess of 1100 degrees C. The particles are stored in internally insulated silos. At times of high electricity demand, the hot particles are gravity-fed through the heat exchanger where stored thermal energy is transferred to the power cycle working fluid to drive the gas turbine power generation system, thereby converting the thermal energy back into electricity for the grid. The cold particles leaving the heat exchanger are returned to the storage silos by a well-insulated particle conveyor. This ETES technology using particle TES can be sited anywhere and is predicted to be economic and efficient. Moreover, this ETES technology could be co-located with a retired coal or gas plant to leverage existing power generation and grid infrastructure. Our work has focused on the development of each of the key components (e.g., the electric particle heater, particle storage silos, and the particle-to-gas pressurized fluidized bed heat exchanger) through conceptual designs, prototype testing, and computational modeling. These developments demonstrate technological feasibility and are an important step towards the next phase of development of this promising LDES technology. This presentation will show the progress in developing a pilot demonstration of the ETES system on a commercially relevant scale.

25 ENERGY STORAGE↗

DOE OSTI2021

Masitinib is a broad coronavirus 3CL inhibitor that blocks replication of SARS-CoV-2

Targeting the main protease of SARS-CoV-2 Inside host cells, the RNA genome of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is translated into two polyproteins that are cleaved to give the individual viral proteins. The main viral protease, known as Mpro or 3CLpro, plays a key role in these cleavages, making it an important drug target. Drayman et al . identified eight drugs that target 3CLpro from a library of 1900 clinically safe drugs. Because of the challenge of working with SARS-CoV-2, they started by screening for drugs that inhibit the replication of a human coronavirus that causes the common cold. They then evaluated the top hits for inhibiting SARS-CoV-2 replication and for inhibiting 3CLpro. Masitinib, a broad antiviral, inhibited the main proteases of coronaviruses and picornaviruses and was effective in reducing SARS-CoV-2 replication in mice.

Drayman, Nir↗

DOE OSTI2022

Perspective on the oil-dominated gas hydrate plugging conceptual picture as applied to transient Shut-In/Restart

Gas hydrate formation is rarely an issue during continuous production conditions. Unplanned and/or extended shut-downs comprise the majority of scenarios where overlapping concern and uncertainty for gas hydrate blockages exist. To date, most experimental studies and theoretical analysis of gas hydrate formation derive from the steady-state conceptual picture. Yet, significant distinctions induced by phase separation and prolonged cooling suggest an altered conceptual picture is required for transient shut-in/restart operations. To address this outstanding issue, this work presents a conceptual picture for the base case of a non-surface active hydrocarbon undergoing cold restart without enacted mitigation efforts. First, phase separation upon shut-in leads to the localization of gas hydrate ingredients due to fluids density differences and pipeline inclination. Cooling to the seafloor temperature, then, induces gas hydrate film formation at the hydrocarbon interface and maximizes subcooling, resulting in rapid and confined gas hydrate growth occurring upon restart. Furthermore, this ultimately leads to plugging dominated by the deposition of porous, low conversion gas hydrate masses. Direct visual observations and results from Raman spectroscopy, hydrate contact angle and film growth, micromechanical force apparatus, rocking cell, and flow loop studies support the mechanisms outlined within each step. Similar to the influence provided by the original Colorado School of Mines steady-state conceptual picture that was introduced about 15 years ago, this transient counterpart builds a foundation that could inspire new directions of hydrate research and analysis in areas where uncertainty abounds.

02 PETROLEUM↗

DOE OSTI2020

Plasma Processing of SRF Cavities for the Next Generation of Particle Accelerators

What are the major goals of the project? Goal 1: Optimize interactively processing of the single-cell cavity by combining plasma treatment and vertical cold bath testing. Continue using single cell cavity as the test bed for new applications. Goal 2: Work on upgrading the plasma etching technology for multi-cell SRF cavities. Goal 3: Develop and adapt discharge configurations to critical cavity regions including the electron beam weld (EBW) and iris areas. Goal 4: Develop tailored methods to prepare surface properties for a specific function prior to any additional modification, such as (but not limited to) surface passivation in preparation of other superconducting materials and structures.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

The Portable Ice Nucleation Experiment (PINE): a new online instrument for laboratory studies and automated long-term field observations of ice-nucleating particles

Atmospheric ice-nucleating particles (INPs) play an important role in determining the phase of clouds, which affects their albedo and lifetime. A lack of data on the spatial and temporal variation of INPs around the globe limits our predictive capacity and understanding of clouds containing ice. Automated instrumentation that can robustly measure INP concentrations across the full range of tropospheric temperatures is needed in order to address this knowledge gap. In this study, we demonstrate the functionality and capacity of the new Portable Ice Nucleation Experiment (PINE) to study ice nucleation processes and to measure INP concentrations under conditions pertinent for mixed-phase clouds, with temperatures from about -10 to about -40°C. PINE is a cloud expansion chamber which avoids frost formation on the cold walls and thereby omits frost fragmentation and related background ice signals during the operation. The development, working principle and treatment of data for the PINE instrument is discussed in detail. We present laboratory-based tests where PINE measurements were compared with those from the established AIDA (Aerosol Interaction and Dynamics in the Atmosphere) cloud chamber. Within experimental uncertainties, PINE agreed with AIDA for homogeneous freezing of pure water droplets and the immersion freezing activity of mineral aerosols. Results from a first field campaign conducted at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory in Oklahoma, USA, from 1 October to 14 November 2019 with the latest PINE design (a commercially available PINE chamber) are also shown, demonstrating PINE's ability to make automated field measurements of INP concentrations at a time resolution of about 8 min with continuous temperature scans for INP measurements between -10 and -30°C. During this field campaign, PINE was continuously operated for 45 d in a fully automated and semi-autonomous way, demonstrating the capability of this new instrument to also be used for longer-term field measurements and INP monitoring activities in observatories.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Fiber-optic sensor packaging assessment and benchmarking for embedded sensing applications

Fiber optic-based sensing for non-destructive evaluation (NDE) and structural health monitoring of various infrastructure and energy assets is an increasingly important sensing scheme. Because of their immunity to electromagnetic interferences, versatility in sensing mechanisms and designs as well as capability for distributed sensing, the fiber optic sensing is of great interest for embedding within infrastructures using advanced manufacturing methods. However, the protection of fiber optic sensors during advanced manufacturing-based embedding is an important aspect for infrastructure monitoring in practice. While successful installation of fiber optic sensors has been accomplished through application of epoxy or adhesives on infrastructure surfaces, there has been only limited investigation of fiber protection packaging schemes which are compatible with in-situ repair techniques such as the metallic cold-spray. With increasing interest and importance of cold spray-based repair processes, the integration of fiber optic sensors simultaneously during the repair is equally important. In this work, we focus our efforts on investigating various types of packaging schemes for their compatibility and integrability on the surfaces of metallic structures such as oil and gas pipelines during an in-situ repair coating. First, we consider sandblasting using silica sand particles of various size for optical fibers on the surface of a metallic coupon as a useful proxy test of sensor packaging stability. Structural damage of packaging is characterized by means of optical microscopy and the optical integrity of embedded fiber optic cables is examined using optical backscatter reflectometry (OBR). In addition, initial investigation of metallic cold-spray embedded fiber optic cables under various packaging on metallic substrates is also considered with early conclusions and future directions.

Fiber-optic sensors, Sensors packaging, Metallic C↗

DOE OSTI2020

Thermodynamic limits for simultaneous energy harvesting from the hot sun and cold outer space

The sun and outer space are two of the most important fundamental thermodynamic resources for renewable energy harvesting. A significant amount of work has focused on understanding the fundamental limit of energy harvesting from the sun. More recently, there have been several theoretical analyses of the fundamental limit of energy harvesting from outer space. However, far less is understood about the fundamental limits of simultaneous energy harvesting from both the sun and outer space. Here, we consider and introduce various schemes that are capable of simultaneous energy harvesting and elucidate the fundamental thermodynamic limits of these schemes. We show that the theoretical limits can far exceed the previously established limit associated with utilizing only one thermodynamic resource. Our results highlight the significant potential of simultaneous energy harvesting and indicate new fundamental opportunities for improving the efficiency of energy harvesting systems.

14 SOLAR ENERGY↗