Search NASA⌕ Search

SEARCH · Search NASA

Results for “Colloids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical Simulation of Light to Heat Conversion by Plasmonic Nanoheaters

Plasmonic nanoparticles are widely recognized as photothermal conversion agents, i.e., nanotransducers or nanoheaters. Translation of these materials into practical applications requires quantitative analyses of their photothermal conversion efficiencies (η). However, the value of η obtained for different materials is dramatically influenced by the experimental setup and method of calculation. Here, we evaluate the most common methods for estimating η (Roper’s and Wang’s) and compare these with numerical estimates using the simulation software ANSYS. Experiments were performed with colloidal gold nanorod solutions suspended in a hanging droplet irradiated by an 808 nm diode laser and monitored by a thermal camera. The ANSYS simulations accounted for both heating and evaporation, providing η values consistent with the Wang method but higher than the Roper approach. This study details methods for estimating the photothermal efficiency and finds ANSYS to be a robust tool where experimental constraints complicate traditional methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗
DOE OSTI2026

Strongly Confined Bismuth Antimonide Quantum Dots

Bismuth antimonide (Bi 1−x Sb x ) has emerged as a highly promising material for quantum applications due to its complex band structure. In this study, spherical Bi 1−x Sb x quantum dots (QDs), with a diameter of around 8 ± 2 nm, were successfully synthesized by pulsed laser ablation in liquids. The energy bandgap was determined at 2.02 ± 0.27 eV, which is significantly higher than the bulk value (∼0.025 eV). The strong confinement nature of the dots was confirmed by the Raman peak shifts. The chemical composition of the Bi 1−x Sb x QDs was measured to be around 77 ± 2 at. % of Bi and 23 ± 2 at. % of Sb. The colloid containing the Bi 1−x Sb x QDs was classified as highly stable, displaying a zeta potential of −38 ± 18 mV. Finally, the Bi 1−x Sb x QDs exhibited an electron spin resonance (ESR) signal at room temperature and at cryogenic temperature (4.2 K); consequently, revealing the presence of paramagnetic states.

Alloys↗
DOE OSTI2025

Scattering-based structural inversion of soft materials via Kolmogorov–Arnold networks

Small-angle scattering techniques are indispensable tools for probing the structure of soft materials. However, traditional analytical models often face limitations in structural inversion for complex systems, primarily due to the absence of closed-form expressions of scattering functions. To address these challenges, we present a machine learning framework based on the Kolmogorov–Arnold Network (KAN) for directly extracting real-space structural information from scattering spectra in reciprocal space. This model-independent, data-driven approach provides a versatile solution for analyzing intricate configurations in soft matter. By applying the KAN to lyotropic lamellar phases and colloidal suspensions—two representative soft matter systems—we demonstrate its ability to accurately and efficiently resolve structural collectivity and complexity. Here, our findings highlight the transformative potential of machine learning in enhancing the quantitative analysis of soft materials, paving the way for robust structural inversion across diverse systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nitrogen–Rich Conjugated Macrocycles: Synthesis, Conductivity, and Application in Electrochemical CO 2 Capture

Here we report a series of nitrogen-rich conjugated macrocycles that mimic the structure and function of semiconducting 2D metal–organic and covalent organic frameworks while providing greater solution processability and surface tunability. Using a new tetraaminotriphenylene building block that is compatible with both coordination chemistry and dynamic covalent chemistry reactions, we have synthesized two distinct macrocyclic cores containing Ni–N and phenazine-based linkages, respectively. The fully conjugated macrocycle cores support strong interlayer stacking and accessible nanochannels. For the metal–organic macrocycles, good out-of-plane charge transport is preserved, with pressed pellet conductivities of 10 –3 S/cm for the nickel variants. Lastly, using electrochemically mediated CO2 capture as an example, we illustrate how colloidal phenazine-based organic macrocycles improve electrical contact and active site electrochemical accessibility relative to bulk covalent organic framework powders. Together, these results highlight how simple macrocycles can enable new synthetic directions as well as new applications by combining the properties of crystalline porous frameworks, the processability of nanomaterials, and the precision of molecular synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Active and Stable PtPd Diesel Oxidation Catalysts under Industry‐Defined Test Protocols

Nanoparticle-supported Pt and Pd catalysts are employed industrially to convert CO and hydrocarbon residue from incomplete diesel fuel combustion into more environmentally-benign products. However, these catalysts deactivate over time due to sintering, especially for Pt nanoparticles which readily generate volatile species under high operating temperatures. Here, we turned the detrimental vapor-mediated sintering of Pt into an advantage by using a physical mixture of Pt and Pd catalysts prepared using a raspberry-colloid-templating (RCT) method. The RCT method produced Pt/Al 2 O 3 and Pd/Al 2 O 3 catalysts with partially embedded NPs to inhibit surface-mediated sintering pathways. As validated using an industry-defined emission control test protocol, aging a physical mixture of Pt/Al 2 O 3 and Pd/Al 2 O 3 at high temperature produced an alloyed PtPd/Al 2 O 3 catalyst that outperformed the fresh catalyst mixture and both individual catalysts for hydrocarbon conversion, while exhibiting high catalytic stability and resistance to sintering and to SO 2 poisoning. X-ray photoelectron spectroscopy revealed that in the aged catalyst mixture, half of the Pd content existed in the more active metallic state, compared to the less active oxide forms in the fresh mixture and both individual catalysts, explaining the unusual activity enhancement. Our results represent a practical approach to producing active and stable PtPd/Al 2 O 3 diesel oxidation catalysts for emission control applications.

Lim, Kang Rui Garrick [Harvard University, Cambrid↗
DOE OSTI2026

Sustainable Synthesis of NiMo Alloy Nanoparticles for Hydrogen Evolution Catalysis Using a Recyclable Ionic Liquid Solvent

Advancing the sustainability of nanoparticle electrocatalyst synthesis requires reducing solvent waste without compromising catalytic performance. Here, we report a rapid, microwave‐assisted colloidal synthesis of NiMo alloy nanoparticles in the ionic liquid 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM‐NTf 2 ), which serves as both reaction medium and recyclable solvent. NiMo nanoparticles with tunable compositions were obtained within 1 min at 230 °C, with Ni 0.86 Mo 0.14 giving the highest activity toward the hydrogen evolution reaction (HER), achieving an onset potential of −129 mV, an overpotential at 10 mA cm −2 of −290 mV versus RHE in acidic electrolyte, and >99% Faradaic efficiency. The ionic liquid was recovered and purified via aqueous NH 4 OH extraction, removing over 99% of residual Mo species, and reused for up to five successive syntheses. Nanoparticles prepared in recycled BMIM‐NTf 2 retained comparable crystallinity, morphology, and catalytic activity, with stable HER performance over 45 h of electrolysis. These results demonstrate that ionic liquid recycling can improve the sustainability of the preparation of NiMo nanoparticle electrocatalysts while preserving performance and material integrity.

bimetallic alloy↗
DOE OSTI2024

Morphology‐controlled synthesis of multi‐metal‐based spinel oxide nanocatalysts and their performance for oxygen reduction

Abstract We present a one‐pot colloidal synthesis method for producing monodisperse multi‐metal (Co, Mn, and Fe) spinel nanocrystals (NCs), including nanocubes, nano‐octahedra, and concave nanocubes. This study explores the mechanism of morphology control, showcasing the pivotal roles of metal precursors and capping ligands in determining the exposed crystal planes on the NC surface. The cubic spinel NCs, terminated with exclusive {100}‐facets, demonstrate superior electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media compared to their octahedral and concave cubic counterparts. Specifically, at 0.85 V, (CoMn)Fe 2 O 4 spinel oxide nanocubes achieve a high mass activity of 23.9 A/g and exhibit excellent stability, highlighting the promising ORR performance associated with {100}‐facets of multi‐metal spinel oxides over other low‐index and high‐index facets. Motivated by exploring the correlation between ORR performance and surface atom arrangement (active sites), surface element composition, as well as other factors, this study introduces a prospective approach for shape‐controlled synthesis of advanced spinel oxide NCs. It underscores the significance of catalyst shape control and suggests potential applications as nonprecious metal ORR electrocatalysts.

Li, Can↗
DOE OSTI2024

Organic Nano-Junctions: Linking Nanomorphology and Charge Transport in Organic Semiconductor Nanoparticles for Organic Photovoltaic Devices

In this study, innovative nanoscale devices are developed to investigate the charge transport in organic semiconductor nanoparticles. Using different steps of lithography techniques and dielectrophoresis, planar organic nano-junctions are fabricated from which hole mobilities are extracted in a space charge-limited current regime. Subsequently, these devices are used to investigate the impact of the composition and morphology of organic semiconductor nanoparticles on the charge mobilities. Pure donor nanoparticles and composite donor:acceptor nanoparticles with different donor compositions in their shell are inserted in the nanogap electrode to form the nano-junctions. The results highlight that the hole mobilities in the composite nanoparticles decrease by two-fold compared to pure donor nanoparticles. However, no significant change between the two kinds of composite nanoparticle morphologies is observed, indicating that conduction pathways for the holes are as efficient for donor proportion in the shell from 40% to 60%. Organic photovoltaic (OPV) devices are fabricated from water-based colloidal inks containing the two composite nanoparticles (P3HT:eh-IDTBR and P3HT:o-IDTBR) and no significant change in the performances is observed in accordance with the mobility results. Through this study, the performance of OPV devices have been successfully correlated to the transport properties of nanoparticles having different morphology via innovative nanoscale devices.

42 ENGINEERING↗
DOE OSTI2026

Single-Particle Insights Into the Electronic Structure and Enhanced Stability of CsPbBr 3 /FAPbBr 3 Core/Crown Nanoplatelets at the Nanometer Scale

Colloidal perovskite nanoplatelets (NPLs), despite their exceptional optoelectronic properties, face significant challenges due to their intrinsic instability and trap-assisted non-radiative recombination. Although many studies employing surface engineering, such as selecting ligands or coating to passivate defects, have demonstrated improved optoelectronic properties, these enhancements are typically inferred from bulk-ensemble measurements; the effects at the single-particle level remain elusive. Here, we conduct single-particle-level studies using scanning tunneling spectroscopy (STS) on a unique core–crown system, CsPbBr 3 @FAPbBr 3 NPLs, where the lateral surfaces of the CsPbBr 3 core are coated with an FAPbBr 3 crown. Experimental density-of-states (DOS) analysis reveals a 47% reduction in deep-trap states in core-crown NPLs compared to core-only NPLs, consistent with nearly two-fold enhancements in photoluminescence quantum yields. Progressive I–V sweep measurements demonstrate superior electrical stability in core-crown NPLs, preserving band structure with minimal degradation, while core-only NPLs exhibit rapid bandgap shrinkage and trap formation. Density functional theory (DFT) calculations indicate that FA incorporation distorts Pb octahedral lattice, widening the bandgap. This study elucidates how surface engineering modulates charge localization, passivates defects, and enhances stability at the single-particle level. Moreover, by uncovering bias-induced trap states in single unpassivated NPLs, this study establishes a precise, robust approach for characterizing emerging perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

A New Method for Polishing Laminated Dissimilar Metals

Here, this paper presents a novel method for preparing metallographic samples of laminated dissimilar metals, specifically a layered structure of zirconium (Zr), vanadium (V), and tungsten (W), which pose a challenge due to their differing crystal structures and hardness levels. The work was motivated by the need to develop a cladding for tungsten targets in spallation neutron sources, where a zirconium face is applied over an interlayer of either vanadium or titanium to prevent the formation of brittle intermetallic compounds such as ZrW 2 . Traditional polishing techniques prove inadequate because each constituent metal requires a different polishing approach based on its unique material properties. The methodology outlined includes a sequential process involving conductive epoxy mounting, successive grinding and polishing with specific abrasives, and a final chemical-mechanical polish using a colloidal silica-based solution. Optical microscopy confirmed that this multi-step process successfully produced scratch-free surfaces and minimized surface relief across the different metal interfaces. Although developed for refractory metals, this approach shows promise for other layered structures comprised of transition metals, offering a meticulous yet effective technique for high-quality metallographic sample preparation.

Newberry, Daniel [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Trace elements and their isotopes in streams and rivers

The occurrence and speciation of trace elements in streams and rivers are controlled by interconnected hydrogeological, biogeochemical, and anthropogenic factors that include rock weathering, climate, vegetation, and land use within the watershed. This chapter provides a broad overview of trace element abundance, speciation, and mobility in streams and rivers, including an assessment of how trace elements are partitioned into dissolved, colloidal, and particulate phases. We also discuss how trace elements are mobilized into stream networks and transformed during transport. Select isotopic systems are reviewed to provide examples of how isotopic analyses can be used to understand geochemical and anthropogenic processes.

Herndon, Elizabeth [ORNL] (ORCID:0000000291945493)↗
DOE OSTI2024

Protorheology in practice: Avoiding misinterpretation

Protorheology is the paradigm that any observed flow or deformation is a chance to infer quantitative rheological properties. While this creates many opportunities for insight, there is significant risk of misunderstanding the physics involved, e.g. misinterpreting a liquid as a solid or mistaking viscous flow time as viscoelastic relaxation time. We describe these and other potential mistakes, use case studies to show how serious the problems can be, and contrast misinterpretations with correct approaches and interpretations. Some issues are especially important with materials involving colloidal particles and flows involving surface tension. Whether the reader is making inference from a tilted vial, time-lapse gravity-driven flow, a bounce test, die swell, or any other protorheology observation, the examples here serve as a guide for avoiding bad data in protorheology.

42 ENGINEERING↗
DOE OSTI2026

Lattice-scale variations in viscosity are correlated with solution structure at mineral-water interfaces

At solid-liquid interfaces, the viscosity increases markedly from the bulk due to the collective interactions of ions and water molecules, influencing phenomena relevant to nanofluidics, colloidal dynamics, and electrochemistry. Here, in this study, we investigated dissipative forces at the boehmite-water interface using 3D atomic force microscopy. We observed an increase in interfacial solution viscosity, η, by 10-100-fold as the nanoprobe approached the surface in normal direction, with up to four oscillatory features showing average peaks of η/η bulk = 44-71. Moreover, the viscosity showed sub-nanometer variations within 0.5 nm from the interface, templated by the underlying crystal lattice and correlated with the interfacial solution structure. Beyond a near-wall region of approximately 1.2 nm, the dissipative response was comparable to that in bulk solution. Molecular dynamics simulations, along with statistical mechanical analyses, provided details on hydrodynamic structures near the interface. Specifically, the lattice-dependent dissipative responses are correlated with extensive hydrogen bonding by interfacial water molecules, which increased friction, particularly along the [001] direction. These results demonstrate how solution viscosity at mineral-water interfaces is anisotropic and correlated with the local solution structure, providing insights into the dynamics of nanocrystal attachment.

Viscosity↗
DOE OSTI2025

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗
DOE OSTI2025

Electrostatically assembled open square and checkerboard superlattices

Programmable assembly of nanoparticles into structures other than two-dimensional hexagonal lattices remains challenging. Assembling an open checkerboard or square lattice is harder to achieve compared to a close-packed hexagonal structure. Here, in this study, we introduce a unified, robust approach to assemble nanoparticles into a diverse family of two-dimensional superlattices at the liquid–air interface. Gold nanoparticles are grafted with pH-responsive, water-soluble poly(ethylene glycol) chains terminating in single bondCOOH or -NH 2 end groups, enabling control over interparticle Coloumbic interactions, while the molecular weight of grafted polymer dictates its conformation. This combined control of charges and conformation enables crystallization into checkerboard, simple-square, and body-centered honeycomb superlattices. Furthermore, tuning the pH induces structural transitions between different lattice types. This approach opens new avenues for the fabrication of colloidal superstructures with tailored architectures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Truncating 2D Framework Materials Down to a Single Pore: Synthetic Approaches and Opportunities

Here, in this Accounts article, we summarize our recent work on truncating conjugated two-dimensional framework materials down to a single pore, or a single macrocycle. Conjugated 2D architectures have emerged as one of the most synthetically adaptable motifs for coupling semiconductivity and porosity in metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). However, despite their prevalence, 2D architectures have several limitations. In particular, the strong interlayer π–π stacking can limit both processability and the accessibility of internal active sites. We have found that simple macrocycles preserve key aspects of 2D framework structure and function, including porosity and out-of-plane electrical conductivity, while providing improved processability, surface tunability, and mass transport properties. In this article, we first describe our synthetic approach and general design considerations. Specifically, we show how ditopic analogues of the tritopic ligands commonly found in the synthesis of 2D MOFs and COFs can be used to achieve a diverse library of conjugated macrocycles that resemble fragments of semiconducting frameworks in both form and function. The length of the peripheral side chains, the size of the aromatic core, and the solubility of intermediates are all key variables in favoring selective macrocycle formation over undesired linear polymers and oligomers. Next, we highlight the unique advantages that macrocycles provide, including improved processability, atomically precise surface tunability, and greater active site accessibility. In particular, the identity of the peripheral side chains dramatically impacts both solubility and colloidal stability as well as crystal size and morphology. We further show how the solution processability and nanoscale dimensions of macrocycles can simplify electronic device fabrication and improve electrochemical performance. Finally, we end with a forward-looking discussion on how macrocycles offer a unique bridge between conjugated molecules and extended frameworks, enabling new application areas and fundamental science.

charge transport↗
DOE OSTI2025

High-Pressure Phase Transition of Metastable Wurtzite-Like CuInSe 2 Nanocrystals

Ternary I–III–VI 2 semiconductors, such as CuInSe 2 , exhibit diverse polymorphs with unique structural characteristics and optoelectronic properties. This study investigates the pressure-induced phase transitions of metastable wurtzite-like CuInSe 2 nanocrystals. Using a combination of synchrotron X-ray diffraction, pair distribution function analysis, and density functional theory calculations, we reveal a transition from cation-ordered wurtzite-like (Pmc2 1 ) to cation-disordered NaCl-like (Fm3̅m) structures at 7.7 GPa. The cation-disordered NaCl-like phase persists upon decompression. Bulk modulus calculations highlight size-dependent deviations from bulk material behavior. These findings deepen our understanding of phase stability in colloidal I–III–VI 2 semiconductor nanocrystals, with implications for tailoring functional materials under extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗