SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A multivariable control design for the F100 turbofan engine was evaluated, as part of the F100 multivariable control synthesis (MVCS) program. The evaluation utilized a real-time, hybrid computer simulation of the engine and a digital computer implementation of the control. Significant results of the evaluation are presented and recommendations concerning future engine testing of the control are made.
The reported investigation is concerned with aspects of 'realistic' cue generation and evaluation. 'Realistic' cues are defined to mean cues that are representative of an aircraft, that are of sufficient magnitude to be sensed, that are in the proper direction arriving at the proper time, and yet that are within the presentation capabilities of the washout/synergistic platform system. Attention is given to the aircraft mathematical model, computer implementation, cockpit hardware, visual display, the motion system, vertical acceleration, longitudinal acceleration and pitch rate, and lateral acceleration and roll rate. The motion cues for fighter aircraft produced by Langley nonlinear adaptive washout/synergistic motion base system are found to be unacceptable in the roll axis representation. However, a method for producing potentially realistic roll cues is identified.
The augmented Lagrangian (ALAG) Penalty Function Algorithm for optimizing nonlinear mathematical models is discussed. The mathematical models of interest are deterministic in nature and finite dimensional optimization is assumed. A detailed review of penalty function techniques in general and the ALAG technique in particular is presented. Numerical experiments are conducted utilizing a number of nonlinear optimization problems to identify an efficient ALAG Penalty Function Technique for computer implementation.
A differential equation for the scale tensor in turbulent flow is developed from basic considerations and applied to the flow of a constant-density fluid in the boundary layer on a flat plate. Results from preliminary runs of a computer implementation are discussed.
Finite element methodology for steady state thermal analysis of convectively cooled structures has been extended for transient analysis. The finite elements are based on representing the fluid passages by fluid bulk-temperature nodes and fluid-solid interface nodes. The formulation of the finite element equations for a typical flow passage is based on the weighted residual method with upwind weighting functions. Computer implementation of the convective finite element methodology using explicit and implicit time integration algorithms is described. Accuracy and efficiency of the methodology is evaluated by comparisons with analytical solutions and finite-difference lumped-parameter analyses. The comparative analyses demonstrate that finite element conduction/conduction methodology may be used to predict transient temperatures with an accuracy equal or superior to the lumped-parameter finite-difference method.
This paper presents a parametric yaw steering law which has been used to provide closed-loop yaw guidance for the launch of the HEAO (High Energy Astronomy Observatory) satellite mission using the Atlas/Centaur launch vehicle. This bilinear tangent steering law provides near optimal yaw steering for maneuvers requiring insertion into orbits with a specified inclination and node. Bilinear tangent steering is shown to be optimal in both the pitch and yaw planes when a uniform gravitational field is assumed. The conditions under which the general bilinear tangent laws degenerate into linear tangent and constant attitude laws are presented. The flight computer implementation of these laws in a rotating coordinate system using real-time integration of the equations of motion is detailed. Explicit solution of the parametric guidance equations requires the inflight solution of (2x2) two-point boundary value problems in the pitch and yaw planes. Excellent results are obtained even for very large (greater than 50 deg) out-of-plane steering angles.
Early options studied in the satisfaction of LACIE implementation computational demands are described as well as the ultimate selection and development of an array processing solution to the problem. The economic justification, as a function of required LANDSAT analysis, is provided. The suitability of such processors for LACIE and other applications is discussed.
A model is being developed to predict pilot dynamic spatial orientation in response to multisensory stimuli. Motion stimuli are first processed by dynamic models of the visual, vestibular, tactile, and proprioceptive sensors. Central nervous system function is then modeled as a steady-state Kalman filter which blends information from the various sensors to form an estimate of spatial orientation. Where necessary, this linear central estimator has been augmented with nonlinear elements to reflect more accurately some highly nonlinear human response characteristics. Computer implementation of the model has shown agreement with several important qualitative characteristics of human spatial orientation, and it is felt that with further modification and additional experimental data the model can be improved and extended. Possible means are described for extending the model to better represent the active pilot with varying skill and work load levels.
A new approach based on the steady-state solutions of the optimal control and estimation problems is presented to study respectively the actuator and sensor locations for large flexible structures. A simple and computer-implementable formulation for minimizing the steady state optimal cost function and the state estimation error inherent in the estimation process is given. In conjunction with the new approach, two criteria are established relating the actuator and the sensor placement optimalities respectively to the minimums of the optimal cost function and the state estimation error. To illustrate the concepts of this paper, we present the results of some numerical and analytical studies on the actuator and the sensor locations of several simple flexible beam modes.
Three dimensional locations are presented for the VHF (30-50 MHz) radiation sources generated by a three-stroke lightning flash at the Kennedy Space Center. The locations were obtained by calculating the difference in time of arrival (DTOA) of radiated pulses at four ground stations. A computer-implemented multiple time series analysis was used in calculating DTOA data. The locations of the approximately 48,000 sequential VHF sources are compared with wide band electric-field records to provide a better understanding of the physics of lightning discharge.
The benefits of linear quadratic regulator synthesis methods in designing a multivariable engine control capable of operating an engine throughout its flight envelope were demonstrated. The entire multivariable control synthesis program is reviewed with particular emphasis on engine tests conducted in the NASA Lewis propulsion systems laboratory altitude facility. The multivariable control has basically a proportional plus integral, model following structure with gains scheduled as functions of flight condition. The multivariable control logic design is described, along with control computer implementation aspects. Altitude tests demonstrated that the multivariable control logic could control an engine over a wide range of test conditions. Representative transient responses are presented to demonstrate engine behavior and the functioning of the control logic.
In the predictive mode, the system synthesizes a horizontal path from an initial aircraft position and heading to a desired final position and heading and then synthesizes a fuel-efficient speed-altitude profile along the path. In the track mode, the synthesized trajectory is reconstructed and tracked automatically. An analytical basis for the design of the system is presented and a description of the airborne computer implementation is given. A detailed discussion of the software, which should be helpful to those who use the actual software developed for these tests, is also provided.
Approximation concepts and dual methods are extended to solve structural synthesis problems involving a mix of discrete and continuous sizing type of design variables. Pure discrete and pure continuous variable problems can be handled as special cases. The basic mathematical programming statement of the structural synthesis problem is converted into a sequence of explicit approximate primal problems of separable form. These problems are solved by constructing continuous explicit dual functions, which are maximized subject to simple nonnegativity constraints on the dual variables. A newly devised gradient projection type of algorithm called DUAL 1, which includes special features for handling dual function gradient discontinuities that arise from the discrete primal variables, is used to find the solution of each dual problem. Computational implementation is accomplished by incorporating the DUAL 1 algorithm into the ACCESS 3 program as a new optimizer option. The power of the method set forth is demonstrated by presenting numerical results for several example problems, including a pure discrete variable treatment of a metallic swept wing and a mixed discrete-continuous variable solution for a thin delta wing with fiber composite skins.
Images of Saturn received from Pioneer 11 suffer from geometrical distortions due to the curvilinear scan lines and the unequal sampling intervals in orthogonal directions, which are inherent in spin-scan imaging. In this paper geometrical image rectification by polynomial transformation based on control points is discussed. Factors that affect the accuracy of reconstruction are shown to include the spatial distribution and spatial density of control points, and the order of the polynomial distortion model. A computer implementation of the technique is described.
The SOUSSA (steady, oscillatory, and unsteady subsonic and supersonic aerodynamics) program is the computational implementation of a general potential flow analysis (by the Green's function method) that can generate pressure distributions on complete aircraft having arbitrary shapes, motions and deformations. Some applications of the initial release version of this program to several wings in steady and oscillatory motion, including flutter are presented. The results are validated by comparisons with other calculations and experiments. Experiences in using the program as well as some recent improvements are described.
Four VHF receivers about 10 km apart were used to detect three-dimensional lightning VHF sources during active thunderstorms. A computer implemented algorithm was used to determine the difference in the time of arrival (DTOA) between the VHF pulses. The three-dimensional source locations determined from the DTOA were correlated with ground electric field measurements (0.1 Hz to 1.5 MHz). Four cloud to ground (CG) and three intracloud (IC) flashes, selected randomly, were studied. A point charge model was used to determine the charge being removed during the different phases of CG and IC flashes. It was determined that return strokes lowered between 24.1 and 3.6 coulombs of negative charge to ground from heights between 10.5 and 5.8 km above MSL. The interstroke process after the first return stroke in a CG flash lowered between 3.4 and 0.9 coulombs of negative charge between the heights of 14.2 (near the cloud tops) to heights of 5.8 km (near the beginning of the leader-return stroke process).
The Rice University convection model is applied to the early main phase of the July 29, 1977 magnetic storm through a computer implementation that self-consistently calculates electric fields, currents, and plasma distributions and velocities in the inner magnetosphere/ionosphere system. On the basis of solar wind parameters and AL index as inputs, the model predicts the injection of plasma sheet plasma to form a substantial storm time ring current whose total predicted strength agrees with the observed Dst index. The possibility that the magnetic field may be sufficiently inflated to make 60 deg field lines extend to the outer magnetosphere is examined. In the model, distortion of the plasma sheet inner edge by magnetospheric compression associated with the sudden commencement temporarily disrupts the normal Birkeland current pattern. Normal Birkeland currents and shielding reassert themselves in about an hour.
Preconditioned conjugate gradient methods for solving sparse symmetric and positive finite systems of linear equations are described. Necessary and sufficient conditions are given for when these preconditioners can be used and an analysis of their effectiveness is given. Efficient computer implementations of these methods are discussed and results on the CYBER 203 and the Finite Element Machine under construction at NASA Langley Research Center are included.