Search NASA⌕ Search

SEARCH · Search NASA

Results for “Computer programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Advanced Compressors for CO2-Based Power Cycles and Energy

Pumped thermal energy storage (PTES) is a cost-effective method for grid-scale, long-duration electrical energy storage (LDES). PTES uses a heat pump cycle to transfer thermal energy from a low temperature reservoir (LTR) to a high temperature reservoir (HTR), later using a heat engine cycle to reverse the process. A key component of the PTES system, the heat pump compressor, represents a significant driver to the cost, performance and operating characteristics of the PTES system. For grid-scale charging (>100 MW), traditional compressor scaling charts indicate that the operating conditions needed would be best served by a multistage axial compressor. While frame gas turbine compressors at these power ratings exist and operate at higher pressure ratios than needed for the CO2 PTES system, the inlet pressure and fluid density of this application exceed experience values. A conceptual design of a large-scale CO2 axial compressor was completed, including mean-line estimates of the compressor performance at full power conditions. The results of the conceptual design were used to refine the PTES cycle design, and updated operating conditions provided for further aero design optimization. A roughly one third scale of the first three stages of the 100 MW compressor was designed, built, and tested at relevant PTES charging conditions. Results of this test program are compared against high-resolution computational fluid dynamics models.

Compressor Heat↗
DOE OSTI2025

Development of Metal Boride/Carbide Precursors for MOCVD Applications (Office of Naval Research Research Performance Progress Report)

Annual Report for Office of Naval Research (ONR) program office. Highlights the synthetic and corresponding computational efforts surrounding the synthesis and processing of chemical precursors and their subsequent processing for formation of metal carbide products. Focus of this annual report is largely directed toward the computational effort as that manuscript is being finalized for submission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

IRIS-MEMFLOW: Data Flow-Enabled Portable Memory Orchestration in IRIS Runtime for Diverse Heterogeneity

Task-based programming models and execution paradigms provide a means to decompose a computation by expressing it as a graph in which each node represents a specific computation operating on memory objects and the edges define the dependencies in the execution flow. In this execution model, independent nodes in the graph can be executed concurrently in different computing devices, making it suitable for heterogeneous systems in which computing devices with different architectures coexist. However, careful memory orchestration across heterogeneous devices is needed because copies of the same memory object may reside in multiple devices during execution. Manually ensuring such an orchestration is quite challenging. Not only must an application developer guard against race conditions, but they must also optimize data movement between the host and devices because unnecessary data movement significantly impacts performance. To mitigate these challenges, we enhance the IRIS heterogeneous runtime and introduce IRIS-MEMFLOW–a data flow–enabled portable memory abstraction for seamlessly orchestrating memory in diverse heterogeneous computing environments. By using data-flow analysis, IRIS-MEMFLOW guards against race conditions while multiple heterogeneous devices access memory objects. IRIS-MEMFLOW also optimizes data movement between the host and devices without manual intervention. As a result, IRIS provides improved programming productivity, performance, and portability for multidevice heterogeneous executions in high-performance computing and cloud systems that run diverse architectures from different vendors. The efficacy of IRIS-MEMFLOW is evaluated through experiments that show its capability in terms of programming productivity, multidevice heterogeneity, portability, and low overhead versus the state of the art.

Monil, M. A. H. [ORNL] (ORCID:0000000334194037)↗
DOE OSTI2026

S4PST: Stewardship and Advancement for Programming Systems and Tools 2024-2025 Project Report

We present the "Stewardship and Advancement of Programming Systems and Tools" (S4PST) project report for the calendar years 2024 and 2025. S4PST is dedicated to the stewardship and advancement of Programming Systems and Tools (PST) mainly targeting high-performance computing (HPC) for the scientific community. The project is part of the funded software stewardship organizations (SSOs) selected by ASCR as part of the NGSST program, and a member of CASS: the Consortiumfor the Advancement of Scientific Software.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Tough Errors are no Match (TEAM): Optimizing the Quantum Compiler for Noise Resilience

This project builds toward a comprehensive error-mitigating toolkit that makes quantum programming more robust and adaptive to the noisy, resource-limited nature of today’s quantum hardware. To that end, it integrates established error-mitigation methods — such as zero-noise extrapolation and dynamical decoupling — directly into compiler infrastructures. These techniques will be packaged as modules that can automatically adjust and combine based on performance analysis, enabling compilers to explore large design spaces and produce optimized, low-noise quantum programs with minimal manual intervention. In parallel, this project also explores new approaches to analog quantum programming or quantum simulation, and has developed the programming language SimuQ which treats quantum Hamiltonian evolution as the central object.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Computational design of non-porous pH-responsive antibody nanoparticles

Abstract Programming protein nanomaterials to respond to changes in environmental conditions is a current challenge for protein design and is important for targeted delivery of biologics. Here we describe the design of octahedral non-porous nanoparticles with a targeting antibody on the two-fold symmetry axis, a designed trimer programmed to disassemble below a tunable pH transition point on the three-fold axis, and a designed tetramer on the four-fold symmetry axis. Designed non-covalent interfaces guide cooperative nanoparticle assembly from independently purified components, and a cryo-EM density map closely matches the computational design model. The designed nanoparticles can package protein and nucleic acid payloads, are endocytosed following antibody-mediated targeting of cell surface receptors, and undergo tunable pH-dependent disassembly at pH values ranging between 5.9 and 6.7. The ability to incorporate almost any antibody into a non-porous pH-dependent nanoparticle opens up new routes to antibody-directed targeted delivery.

Biochemistry & Molecular Biology↗
DOE OSTI2025

Optimization of distributed compute resources utilization in the CMS Global Pool

The CMS Submission Infrastructure is the primary system for managing computing resources for CMS workflows, including data processing, simulation, and analysis. It integrates geographically distributed resources from Grid, HPC, and cloud providers into federated pools managed by HTCondor and Glidein- WMS, for a total of around 500k CPU cores. This system dynamically manages workloads based on priorities defined by the collaboration. Additionally, CMS scheduling strategies must be flexible to handle multiple concurrent workloads while considering changing processing demands and resource availability from various providers.Efficient utilization of vast amounts of distributed compute resources is a key element for the success of the scientific programs of the LHC experiments. Optimizing the system is essential to maximize resource efficiency and fully utilize the distributed computing power. The CMS Submission Infrastructure team thus systematically investigates sources of inefficiency in workload scheduling to reduce their impact. In addition, a strategy of pilot overloading has been introduced to compensate for other inefficiency sources, thereby optimizing resource utilization and enhancing computational throughput.

Mascheroni, Marco [UC, San Diego (main)]↗
DOE OSTI2024

INSPIRED: Inelastic neutron scattering prediction for instantaneous results and experimental design

Inelastic neutron scattering (INS) has unique advantages in probing how atoms vibrate and how the vibrations propagate and interact. Such dynamic information is crucial in understanding various material properties, from heat capacity, thermal conductivity, phase transitions, and chemical reactions to more exotic quantum behavior. The analysis and interpretation of the INS spectra often start from a model structure of the sample, followed by a series of calculations to obtain the simulated spectra to compare with experiments. The conventional way to perform such calculations usually requires significant time, computing resources, and specialized expertise. Here, we present a new program named INSPIRED (Inelastic Neutron Scattering Prediction for Instantaneous Results and Experimental Design), which enables users to perform rapid INS simulations in several different ways on their personal computers in just a few clicks, with the crystal structure as the only input file. Specifically, the users can choose a pre-trained symmetry-aware neural network (coupled with an autoencoder) to predict the phonon density of states (DOS), 1D S(E) and 2D S(|Q|,E) spectra for any given structure. One can also choose an existing density functional theory (DFT) calculation from a database (containing over 12,000 crystals), and quickly obtain the simulated INS spectra for single crystals and powders. It is also possible to use pre-trained universal machine learning force fields to relax a given crystal structure, calculate the phonon dispersion and DOS, and, subsequently, the INS spectra. All these functions are implemented with a PyQt graphic user interface. Finally, we expect these new tools will benefit broad user communities and significantly improve the efficiency of experiment design, execution, and data analysis for INS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

SEC ‐ SAXS / MC Ensemble Structural Studies of the Microtubule Binding Protein Cdt1 Show Monomeric, Folded‐Over Conformations

ABSTRACT Cdt1 is a mixed folded protein critical for DNA replication licensing and it also has a “moonlighting” role at the kinetochore via direct binding to microtubules and the Ndc80 complex. However, it is unknown how the structure and conformations of Cdt1 could allow it to participate in these multiple, unique sets of protein complexes. While robust methods exist to study entirely folded or unfolded proteins, structure–function studies of combined, mixed folded/disordered proteins remain challenging. In this work, we employ orthogonal biophysical and computational techniques to provide structural characterization of mitosis‐competent human Cdt1. Thermal stability analyses shows that both folded winged helix domains1 are unstable. CD and NMR show that the N‐terminal and linker regions are intrinsically disordered. DLS shows that Cdt1 is monomeric and polydisperse, while SEC‐MALS confirms that it is monomeric at high concentrations, but without any apparent inter‐molecular self‐association. SEC‐SAXS enabled computational modeling of the protein structures. Using the program SASSIE, we performed rigid body Monte Carlo simulations to generate a conformational ensemble of structures. We observe that neither fully extended nor extremely compact Cdt1 conformations are consistent with SAXS. The best‐fit models have the N‐terminal and linker disordered regions extended into the solution and the two folded domains close to each other in apparent “folded over” conformations. We hypothesize the best‐fit Cdt1 conformations could be consistent with a function as a scaffold protein that may be sterically blocked without binding partners. Our study also provides a template for combining experimental and computational techniques to study mixed‐folded proteins.

Cell Biology↗
DOE OSTI2025

Comprehensive assessment of deep reinforcement learning approaches for economic dispatch in nuclear-driven microgrids

As the electrical grid integrates more variable renewable energy sources such as wind and solar, the demand for distributed and flexible systems to address this increased variability becomes critical. Nuclear-driven microgrids provide a promising solution by offering stable generation to complement intermittent renewables, ensuring grid reliability and operating efficiency. This paper proposes a recurrent deep reinforcement learning framework for optimal economic dispatch in a nuclear-powered microgrid integrating renewable energy sources, small modular reactors, battery storage systems, and balance-of-plant dynamics. A three-agent control architecture is developed, where demand and renewable energy agents act as forecasters, and a reinforcement learning-based dispatch agent performs real-time energy allocation. A nonlinear programming formulation is first used to generate an optimal baseline for benchmarking. The proposed dispatch controller, based on Proximal Policy Optimization enhanced with Long Short-Term Memory networks, exploits temporal correlations in system dynamics by taking advantage of the time series used as inputs to improve policy robustness under uncertainty. Comparative analysis against established deep reinforcement learning methods, including Proximal Policy Optimization with a feedforward architecture, Soft Actor-Critic, and Twin Delayed Deep Deterministic Policy Gradient, demonstrates superior performance. Numerical results indicate that the proposed controller achieves a 0.39% cost reduction relative to the nonlinear programming benchmark and outperforms other learning-based methods by generating additional revenue of up to 0.35%. All reinforcement learning controllers compute dispatch actions in less than 0.3 s, resulting in a computational speedup of more than three orders of magnitude over the nonlinear programming baseline. The findings of this paper highlight their applicability for real-time operation and control in nuclear-integrated microgrids under volatile operating conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Argonne Leadership Computing Facility 2024 Operational Assessment Report

This Operational Assessment Report describes how the Argonne Leadership Computing Facility (ALCF) met or exceeded every goal set by DOE for the calendar year (CY) 2024. In CY 2024, the ALCF operated Polaris, an AMD and NVIDIA-based Hewlett Packard Enterprise (HPE) Apollo 6500 Gen10+ system that provides a powerful platform for breakthrough science and prepares applications and workloads for Aurora, Argonne National Laboratory’s Intel-HPE exascale computer. Since going into production in August 2022, Polaris has supported research teams from the DOE Exascale Computing Project (ECP), which concluded in 2024, and from ALCF’s Aurora Early Science Program (ESP). Polaris delivered a total of 2555.7K node-hours to 17 Innovative and Novel Computational Impact on Theory and Experiment (INCITE) 2024 projects and 601.6K node-hours to ASCR Leadership Computing Challenge (ALCC) projects (12 of which were awarded during the 2023–2024 ALCC year and 11 of which were awarded during the 2024–2025 ALCC year), as well as providing substantial time for Director’s Discretionary (DD) projects (966.2K node-hours). As Table ES.1 shows, Polaris performed exceptionally well in terms of overall availability (97.7 percent), scheduled availability (99.6 percent), and utilization (94.7 percent; Table 2.1). In CY 2024, ALCF supported more than 2,000 users. As of March 18, 2025, ALCF’s users have published 254 papers in peer-reviewed journals and technical proceedings.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Computational Modeling of Atmospheric Processes at Texas Southern University

Texas Southern University (TSU) is strengthening its research program in atmospheric chemistry and physics with a climate science emphasis by leveraging partnerships with the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Facility, Brookhaven National Laboratory (BNL), and the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). This RDPP-supported program focuses on secondary organic aerosols (SOAs) and reactive atmospheric species that influence cloud formation, precipitation processes, and radiative forcing. SOAs play a critical role in cloud microphysics and Earth’s energy balance, yet the chemical and physical mechanisms governing SOA–cloud interactions remain a significant source of uncertainty in predictive climate models. Through computational modeling, observational data analysis, and national laboratory collaboration, this program develops a skilled cohort of students trained in atmospheric science, environmental data analysis, and climate-relevant modeling. These research experiences build technical competencies that are transferable to careers in government laboratories, academia, and industry. By engaging students from historically underrepresented communities in high-impact climate research, TSU expands participation in the atmospheric sciences workforce while contributing meaningful scientific insights to DOE-supported ARM research activities. This partnership strengthens national capacity in climate science and supports the development of the next generation of atmospheric researchers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Mid-circuit Measurement & Branching in QSCOUT: A Ping-Pong Teleportation Exemplar Program

This document is intended to help users program the new mid-circuit measurement (MCM) and classical branching capabilities of the Quantum Scientific Computing Open User Testbed (QSCOUT). Here, we present and explain an exemplar “ping-pong teleportation” program that makes repeated MCM and branching calls. The program is written in Jaqal, the quantum assembly language used by QSCOUT. This document is intended to accompany a companion Jupyter notebook Exemplar_one_bit_teleportation_pingpong.ipynb.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Carbon-Based Quantum Information Science with Symmetry Protected Topological States (Final Report, DOE-BES award DE-SC0023105)

This research program established the scientific foundation for the rational, bottom-up design, synthesis, isolation, and investigation of symmetry-protected topological (SPT) electron spin qubits embedded in graphene nanoribbons (GNRs). The work focused on integrating atomically precise low-dimensional carbon nanostructures with emerging quantum logic architectures, providing a pathway toward scalable quantum materials for next-generation computing and sensing technologies. A central component of the program was the elucidation of fundamental relationships between real-space molecular architecture, local spin density distributions, electronic band dispersion, and energy level alignment in atomically precise GNR systems. These correlations define key operational parameters of SPT qubits and were systematically investigated to establish quantitative benchmarks against established molecular and solid-state spin qubit platforms. Attention was given to properties critical for quantum device performance, e.g. decoherence times, spectral sharpness of energy transitions, and tunable exchange interactions between spin states. The research demonstrated that these parameters can be engineered with atomic precision through scalable bottom-up synthetic strategies. Theory-guided design played a central role in identifying candidate structures hosting topologically protected spin states. Experimental validation was performed using both ensemble measurements and single-molecule characterization. In addition to advances in quantum materials synthesis, the program developed and applied spin-sensitive scanning probe microscopy techniques capable of directly probing quantum states and dynamic processes with atomic-scale spatial resolution. These capabilities enabled direct observation and characterization of quantum structures at the single-atom level. While the research activities were primarily hypothesis-driven fundamental investigations, the program adopted a comprehensive materials-by-design framework aimed at translating scientific discoveries into technological concepts compatible with scalable and intelligent manufacturing approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Empowering Scientific Innovation Through An Integrated Research Infrastructure: The Role of the Advanced Computing Ecosystem

As the landscape of computational science evolves, the Department of Energy (DOE) is reimagining the roles of its large-scale computing facilities to meet emerging research challenges. The Integrated Research Infrastructure (IRI) program aims to transform how experiments are designed, conducted, and shared, with significant impacts on all stakeholders. In response, the Oak Ridge Leadership Computing Facility (OLCF) has established the Advanced Computing Ecosystem (ACE), a strategic framework to prepare its hardware, software, and experimental capabilities for the IRI era. ACE focuses on integrating novel compute environments, orchestrating advanced workflows, and developing foundational technologies, ensuring a seamless transition to IRI while accelerating scientific discovery. This paper outlines ACE's role in advancing OLCF's mission and its impact on the future of computational science.

Widener, Patrick↗
DOE OSTI2027

Nodal capacity expansion planning with flexible large-scale load siting

We propose explicitly incorporating large-scale load siting into a stochastic nodal power system capacity expansion planning model that concurrently co-optimizes generation, transmission, and storage expansion. The potential operational flexibility of some of these large loads is also taken into account by considering them as consisting of a set of tranches with different reliability requirements, which are modeled as a constraint on expected served energy across operational scenarios. We implement our model as a two-stage stochastic mixed-integer optimization problem with cross-scenario expectation constraints. To overcome the challenge of scalability, we build upon existing work to implement this model on a high performance computing platform and exploit scenario parallelization using an augmented Progressive Hedging Algorithm. The algorithm is implemented using the bounding features of mpisppy, which have shown to provide satisfactory provable optimality gaps despite the absence of theoretical guarantees of convergence. We test our approach and assess the value of this proactive planning framework on total system cost and reliability metrics using realistic testcases geographically assigned to San Diego and South Carolina, with datacenter and direct air capture facilities as large loads.

24 POWER TRANSMISSION AND DISTRIBUTION↗