SEARCH · Search NASA

Results for “Conservative variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Linking habitat suitability with a longleaf pine-hardwood model: Building a species-predictive fire-land management framework

Active management of fire-dependent ecosystems for specific species leads to complex tradeoffs, which affect conservation outcomes to other species. Therefore a multi-species evaluation of management actions is required. Habitat Suitability Models (HSMs) can help in predicting the likelihood of species occurrence using corresponding environmental variables and empirical relationships that link occurrence with specific environmental conditions. Incorporating multiple species into HSMs and relating them to habitat dynamics is crucial for ecosystems that require active management with prescribed fire. To address this issue, we developed multi-species HSM driven within an existing population model of the longleaf pine-hardwood ecosystem to assess the suitability of an ecosystem given different fire management strategies and environmental conditions. The population model used in this study provides spatial and temporal changes of longleaf pine-hardwood habitat structure in response to fire. These habitat values are used by the HSM to calculate habitat suitability for three threatened and endangered faunal species of this ecosystem, which all thrive with frequent fire, but have unique habitat requirements. Transient habitat conditions are traced to predict longleaf pine ecosystem trajectories under various management strategies, thereby evaluating current land management actions, such as thinning or prescribed fire frequencies. We tested a suite of environmental conditions to emphasize the sensitivity of the species to different fire management actions. The results of our modeling suggest that maximum suitable habitat for all three species can be achieved with fire frequency occurring at approximately once every three years. The modeling results support current management actions and provide a new habitat assessment tool that incorporates ecological factors for multiple species, thus providing for habitat optimization.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Integrability technique for fluid flow induced deformation of a boundary hair

The deformation of a dense carpet of hair due to Stokes flow in a channel can be described by a nonlinear integrodifferential equation for the shape of a single hair, which possesses several solutions for a given choice of parameters. Although it was posed in a previous study and it bears a resemblance to the pendulum problem from mechanics, this equation has not been analytically solved until now. Despite the presence on an integral with a nonlinear functional dependence on the dependent variable, the system is integrable. We compare the analytically obtained solution to a finite-difference numerical approach, identify the physically realizable solution branch, and briefly study the solution structure through a conserved energylike quantity. Time-dependent fluid-structure interactions are a rich and complex subject to investigate, and we argue that the solution discussed herein can be used as a basis for understanding these systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

An Orthogonal Recursive Bisection (ORB) Based Time Advancement Algorithm for CFD-DEM Solvers

The time integration of the granular phase in coupled computational fluid dynamics (CFD) – discrete element method (DEM) simulations presents a unique computational challenge brought about by the large variations in particle collisional time scales. Particles in the dilute regions of the computational domain can be advanced with large time steps while dense regions require much smaller time increments. However, the time step size in most solvers is globally set as the limit for accuracy and stability imposed by the collisions and is typically orders of magnitude less than that required away from collisions. This work addresses this precise issue and provides a strategy to avoid the use of a global conservative small time step size for the entire set of particles.A novel time stepping algorithm for CFD-DEM solvers using a partitioning approach using orthogonal recursive bisection (ORB) that allows for variable time steps among particles is described and its computational performance is compared against baseline explicit methods, typically used in several CFD-DEM solvers. ORB has advantages of being relatively quick and easy to update incrementally and has the required heuristic behavior (i.e., it will split the region in half with a cluster on each side) when groups of particles are well separated (clustered). The algorithm presented in this work uses a local time stepping approach to resolve collisional time scales for subsets of particles that are present at the leaves of the ORB, thereby resulting in substantial reduction of computational cost. The parallel implementation of this method where a ``knapsack” algorithm is used in tandem with ORB for effective load-balancing is also presented, where a best possible partitioning is obtained based on number of particles and local time-stepping costs. The algorithm is tested against benchmark problems with varying particle distributions that include fluidized bed and riser flow scenarios. Preliminary results indicate that the approach is 2-3X faster than traditional explicit methods for problems that involve both dense and dilute regions, while maintaining the same level of accuracy.

adaptive timestepping↗

DOE OSTI2023

EUI Benchmarks for Net-Zero Energy Buildings in India

In our study we present EUI benchmarks for NZEBs for six building types across residential and non-residential typologies and for India's five climate zones. This approach is similar to the simulation-based benchmarks used by the B3 program in Minnesota, the Cal-Arch methodology in California, and the US Solar Decathlon approach, which combine simulations with actual building data. Of the six building types we explore one in detail with a range of operation scenarios, specifically narrowing down the EUI benchmarks for mixed-mode building operation and for variable temperature set-points as prescribed in the National Building Code of India.The contribution of this work is to provide rigorous end-use level EUI benchmarks for six building types, and to describe a method for simulation-based EUI benchmarks for mixed-mode operation with variable setpoints to highlight the difference between the standard approach used for the five building types and the On-Site Construction Worker Housing which additionally has the mixed-mode variable setpoint approach.On-Site Construction Worker Housings are typically poorly constructed temporary structures, without adequate thermal comfort, It is critical to provide adequate thermal comfort to protect people from the warming effects of climate change, and to discover super efficient and cost-effective ways to do so.The methodology used for the On-Site Construction Worker Housing (CWH) results in an 80% acceptability according to the India Model for Adaptive Comfort in the National Building Code of India. EUIs of all six buildings are 60% lower than the minimum compliance with India's Energy Conservation Building Codes, providing benchmarks for efficiency levels. The end-use level EUI benchmarks are now provided to over 1800 Solar Decathlon India participants so that they can compare the performance of their NZEB designs.In particular, the CWH results provide an insight into the importance of the mixed-mode operation with variable temperature set-points. The results from the simulation study show that for an NZEB target, the EUI with standard thermal comfort model and without mixed operation is 58.26 kWh/m2*year, while that with the variable set-points of the adaptive model with mixed mode operation is 24.23 kWh/m2*year. This is a 58% reduction in EUI. Given that many building types including residential, and non-residential operate in mixed mode, it is important to take this work further to develop mixed-mode operation NZEB benchmarks so that the carbon intensity of these buildings could be lower than the standard thermal comfort model approach.

benchmarking↗

DOE OSTI2024

Energy Analysis of Combi Heat Pump System Configurations for Space Conditioning and Domestic Hot Water Heating in Residential Buildings

Combi heat pump systems, also referred to multifunctional variable refrigerant flow heat recovery (MF-VRFHR) systems, are specifically designed for residential applications to manage both space conditioning and domestic hot water (DHW). They have attracted attention due to their potential for energy conservation through heat recovery. The incorporation of a hot water tank introduces various system configurations, each characterized by distinct pros and cons related to energy efficiency, system stability, and maintenance. Despite this, a critical gap exists as the specific energy performance remains unquantified under diverse operational modes (e.g., heating mode and heat recovery mode). This paper aims to bridge this gap by conducting a comprehensive comparative analysis of two prevalent system configurations while considering feasible proposed control logics. Configuration 1 integrates a separate hot water tank and a refrigerant-to-water heat exchanger (HEX), also known as a Hydro Kit while Configuration 2 incorporates a refrigerant-wrapped hot water tank. To facilitate this analysis, we developed high-fidelity system models for both configurations in Modelica, capturing system dynamics and detailed control sequences effectively. These system models were built upon the TIL library for HVAC equipment components and the Buildings library for residential building thermal load calculations. The validation of the simulation testbed utilized data from experiments conducted in the PNNL lab home for Configuration 1. To establish the simulation testbed for Configuration 2, we extended the modeling setup derived from Configuration 1. This extension specifically involved substituting the separate hot water tank and Hydro Kit with a refrigerant-wrapped hot water tank of similar sizing sourced from an actual product. The simulation analysis of heating-only and heat recovery modes reveals that Configuration 2 not only saves energy and maintains warmer tank temperatures but also demonstrates faster water heating capabilities. This is attributed to decreased energy loss and improved heat transfer. The study encompasses a wide range of scenarios, considering diverse thermal loads and water usage patterns across heating and heat recovery modes. Overall, the comprehensive results indicate that Configuration 2 achieves energy savings ranging from 3.5% to 12.2% compared to Configuration 1, depending on factors such as water usage patterns, thermal loads, and operational modes.

Configuration, Comparison, Multi-functional, Resid↗

DOE OSTI2023

Electron kinetics in a high- Z plasmoid

The problem of the electron dynamics on a closed magnetic field line passing through a high-Z plasmoid is considered. The electron kinetic equation is integrated over bounce motion and pitch angle, reducing the independent variables to a single adiabatic invariant plus time. Integration of the full Landau self-collision operator is carried out exactly, resulting in a nonlinear integro-differential operator in the new invariant. Conservation laws and the H theorem of the integrated self-collision operator are proven. Numerical solutions of the integrated kinetic equation are obtained with a self-consistent quasineutral electric potential, given the initial condition of a cold plasmoid immersed in a hot ambient plasma. The fact that cold electrons are deeply trapped in a potential with a parabolic peak leads to exactly 3/4 the usual rate of collisional heating by the ambient plasma, independent of any other parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Opportunities for Using the Industrial Assessment Center Database for Industrial Water Use Analysis

The manufacturing sector accounted for approximately 5–6% of total U.S. water use in 2015. Of that amount, 75–80% is self supplied withdrawal from surface-water and groundwater sources and the remainder is from public water supplies. Although manufacturing facilities commonly locate in water-scarce areas, water scarcity still poses a great risk to the manufacturing sector. Reliable water is necessary for any facility that relies on it for process and comfort cooling, cleaning, employee use, and steam generation. One of these barriers to water efficiency is the lack of reliable data on overall U.S. industrial water use—how it is used and the quantities required for each sector. If a facility cannot be easily compared with a facility of similar size and sector, knowing if it is effectively using water conservation best practices is difficult. One potential source of industrial water use data is the U.S. Department of Energy (DOE)–sponsored Industrial Assessment Centers (IACs). IACs are university-based organizations that provide free audits to small- and medium-sized manufacturing facilities to identify productivity improvement and waste and energy reduction opportunities. The IACs also maintain a database of all the audits conducted, which currently holds more than 19,267 assessments and 145,000 recommendations (as of July 24, 2020). This database also contains energy utility (electricity, natural gas, and other fuels) and water utility data, making it a potential data source for industrial water use. This report attempts to create regression models to predict a small- or medium-sized industrial facility’s annual water use or cost based on its industrial subsector and several possible relevant variables. Using data collected by IAC assessments, models for several industrial subsectors were generated via stepwise regression techniques to determine which variables (annual sales, number of employees, facility/plant area, annual production hours, and a water stress metric) are relevant.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Long-term variability of root production in bioenergy crops from ingrowth core measurements

Long-term determination of root biomass production upon land-use conversion to biofuel crops is rare. To assess land-use legacy influences on belowground biomass accumulation, we converted 22-year-old Conservation Reserve Program (CRP) grasslands and 50+-year-old agricultural (AGR) lands to corn (C), switchgrass (Sw) and restored prairie (Pr) biofuel crops. We maintained one CRP grassland as a reference (Ref). We hypothesized that land-use history and crop type have significant effects on root density, with perennial crops on CRP grasslands having a higher root biomass productivity, while corn grown on former agricultural lands produce the lowest root biomass. Methods The ingrowth core method was used to determine in situ ingrowth root biomass, alongside measurements of aboveground net primary productivity (ANPP). Ancillary measurements, including air temperature, growing season length and precipitation were used to examine their influences on root biomass production. Important Findings Root biomass productivity was the highest in unconverted CRP grassland (1716 g m-2 yr-1) and lowest in corn fields (526 g m-2 yr-1). All perennial sites converted from CRP and AGR lands had lower root biomass and ANPP in the first year of planting but peaked in 2011 for switchgrass and a year later for restored prairies. Ecosystem stability was higher in restored prairies (AGR-Pr: 4.3 ± 0.11; CRP-Pr: 4.1 ± 0.10), with all monocultures exhibiting a lower stability. Root biomass production was positively related to ANPP (R2 = 0.40). Overall, attention should be given to root biomass accumulation in large-scale biofuel production as it is a major source of carbon sequestration.

Environmental Sciences & Ecology↗

DOE OSTI2024

Curvature of the chiral phase transition line from the magnetic equation of state of ( 2 + 1 )-flavor QCD

We analyze the dependence of the chiral phase transition temperature on baryon number and strangeness chemical potentials by calculating the leading order curvature coefficients in the light and strange quark flavor basis as well as in the conserved charge ( B , S ) basis. Making use of scaling properties of the magnetic equation of state (MEoS) and including diagonal as well as off-diagonal contributions in the expansion of the energylike scaling variable that enters the parametrization of the MEoS, allows to explore the variation of T c ( μ B , μ S ) = T c ( 1 − ( κ 2 B μ ^ B 2 + κ 2 S μ ^ S 2 + 2 κ 11 B S μ ^ B μ ^ S ) ) along different lines in the ( μ B , μ S ) plane. On lattices with fixed cutoff in units of temperature, a T = 1 / 8 , we find κ 2 B = 0.015 ( 1 ) , κ 2 S = 0.0124 ( 5 ) and κ 11 B S = − 0.0050 ( 7 ) . We show that the chemical potential dependence along the line of vanishing strangeness chemical potential is about 10% larger than along the strangeness neutral line. The latter differs only by about 3% from the curvature on a line of vanishing strange quark chemical potential, μ s = 0 . We also show that close to the chiral limit the strange quark mass contributes like an energylike variable in scaling relations for pseudocritical temperatures. The chiral phase transition temperature decreases with decreasing strange quark mass, T c ( m s ) = T c ( m s phy ) ( 1 − 0.097 ( 2 ) ( m s − m s phys ) / m s phy + O ( ( Δ m s ) 2 ) . Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Next Generation Solvent Vapor Pressure Testing

Previous work by Savannah River National Laboratory (SRNL) indicated that the actual Next Generation Solvent vapor pressure would be higher than the Original Caustic Side Solvent Extraction (CSSX) solvent vapor pressure, but below a bounding vapor pressure using Raoult’s Law. Since solvent vapor pressure has a significant impact on Composite Lower Flammability Limits (CLFL) and attendant accident analyses, obtaining an additional margin from the bounding NGS vapor pressure would be valuable. In order to quantify how much margin might be gained from the NGS bounding solvent, SRNL researchers were requested to perform vapor pressure testing with the Next Generation Solvent (NGS) by Savannah River Mission Completion (SRMC). The vapor pressure curve for the NGS formulation set to be deployed at the Salt Waste Processing Facility (SWPF) has been determined by SRNL up to 55°C (131°F) using headspace Gas Chromatography (GC). It was expected that NGS would have a higher vapor pressure than the Original CSSX solvent; however, experimental results indicate a lower vapor pressure. At this time, it is uncertain if this difference is due to the 7x increase in concentration of the large calixarene in the solvent (0.007M BOBCalix in Original CSSX solvent vs. 0.05M MaxCalix in NGS) or to minor batch-to-batch variations in Isopar-L constituents. The NGS and the Original CSSX solvent vapor pressure data were fitted to the Antoine Equation. The Antoine equation gives a more accurate representation of the expected vapor pressure of the solvents outside of the temperature range tested. The Antoine equation fitting for NGS is given below: $P=10^{6.364⁻\frac{1788.4}{T+219.3}}$. Where, p is the vapor pressure (partial pressure) of NGS in mmHg and T is the temperature in °C. It is recommended that SRMC either continue using the more conservative Isopar-L vapor pressure calculations at SWPF with the equation developed for the Original CSSX solvent, or the equation presented above for the NGS solvent. Additionally, it is recommended to study the variability in Isopar-L vapor pressure between lots.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

COMBLE-ISLAS water isotopes in precipitation (COMBLEISLASISO)

During the measurement period, precipitation was sampled on daily to sub-daily basis with a sampling kit consiting of a clear plastic box (60x40x40 cm) mounted to a ground structure. Daily sampling lasted from 22 Feb to 24 Mar 2020. At a fixed time of day (10 UTC), samples were collected and the sampling box cleaned for the next sample. Additionally, during intense observations periods (IOPs) announced by ISLAS, ARMS scientists increased sampling frequency to sub-daily sampling. During the campaign period, 2 IOPs were conducted, with in total 12 samples taken. IOP1 lasted from 27 Feb 10 to 02 Mar 2020, and IOP2 lasted from 12 Mar to 14 Mar 2020. Solid precipitation in the box was then melted, transferred to an 8 ml glass vial, sealed and shipped to FARLAB (University of Bergen, Norway) for stable water isotope analysis. Measured stable isotope composition of precipitation samples will be related to conditions at other sampling locations, and at the evaporation site to inform about conservation of water isotope quantities. In the period from 22 Feb to 24 Mar, 23 daily samples were collected at 10 UTC for stable water isotope analysis. During the entire sampling period, a high variability of precipitation phase was encountered. Most samples were recovered in the form of graupel/snow (12 samples), as rain (7 samples), and the remaining samples fell as graupel, snow, rain or frozen rain. Precipitation amounts varied between <1 mm (26 Feb) and 140 mm (25 Feb) within the sampling box. Furthermore, higher-resolution sampling was conducted during 2 intense observation periods (IOPs). During IOP1, lasting from 27 Feb 10 UTC to 02 Mar 10 UTC, 7 samples were collected, all of them as solid phase precipitation. IOP2 lasted from 12 Mar 10 UTC to 14 Mar 09 UTC, and 5 samples (all as graupel/snow) were collected. Samples were processed according to FARLAB standard measurement procedures. In short, samples were transferred to 1.5 ml glass vials with rubber/PTFE septa (part #548-0907, VWR, USA). An autosampler (A0325, Picarro Inc) transferred ca. 2µl per injection into a high-precision vapourizer (A0211, Picarro Inc, USA) heated to 110°C. After blending with dry N2 (< 5 ppm H2O) the gas mixture was directed into the measurement cavity of a Cavity-Ring Down Spectrometer (L2140-i, Picarro Inc) for about 7 min with a typical water concentration of 20 000 ppm. Memory effects were reduced by two times measuring a vapour mixture at a mixing ratio of 50 000 ppm, obtained from 2 injections of 2 µl for 5 min at the beginning of each new sample vial. Thereafter, another 6 injections of 2 µl per sample were measured individually as described above, and averages of the last 5 injections were used for further processing. Three standards were measured at the beginning and end of each batch, including a drift standard DI2 (δD: -50.72±0.73 permil, δ18O: -7.63±0.10 permil), and for calibration the laboratory standards GLW (δD: -307.79±0.75 permil, δ18O: -40.02±0.07 permil) and EVAP2 (δD: 9.52±0.65 permil, δ18O: 1.81±0.13 permil). A detailed calibration report is included with the final uploaded data set.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Symmetry Determining Equations of the Rankine-Hugoniot Equations for Variable Velocity Shock Waves

The “constant velocity piston” problem (Fig. 1), also known as the “piston problem,” is a standard model for a one dimensional, in our case linear, symmetric shock wave moving through an inviscid, perfect gas. The model can be divided into two regions - a perturbed section on the left and an unperturbed section on the right - by a moving shock wave moving left to right. Both the perturbed and unperturbed sections, i.e. the shocked and unshocked regions, respectively, obey the Eulerian conservation equations; however, at the exact location of the shock, there is a mathematical discontinuity not satisfied by the Euler equations. To ensure continuity and conservation of certain quantities when crossing between the unshocked and shocked regions, we evoke a series of equations derived from the Eulerian conservation equations, called the Rankine-Hugoniot equations, or “jump” equations as it is often referred to in the literature on the topic. The classical constant-velocity piston problem assumes the piston features a constant driving velocity (among many other willing suspensions of belief required in the pursuit of a first principles equation model); consequent to this assumption is a constant-velocity shock and a constant-velocity shocked flow state. However, using Lie Group Theory (LGT), also known as symmetry analysis, we can attempt to reinterpret the model with a shock wave of variable velocity in time and space. An extension of the model in this way opens up the possibility for obtaining new analytical solutions to the piston problem for certain shock velocity models. In this report, we use LGT to derive the symmetry determining equations (SDEs), whose solutions are Lie groups, which permit analytical solutions. In the future, we can then use the SDEs to define constraint equations on the shock velocity model and what the successive solutions to the Euler equations might be based off such constraints. This report is structured as follows: Section 2 provides a brief derivation of the Rankine-Hugoniot (“jump”) equations; Section 3 gives an overview of Lie group theory; Section 4 derives the SDEs of the jump equations; Section 5 derives the Euler conservation equations for fluids; and Section 6 presents concluding remarks and opportunities for future studies.

42 ENGINEERING↗

DOE OSTI2026

Evolutionary constraints and climate variability jointly shape starch–sugar balance in woody plants

Nonstructural carbohydrates (NSC) buffer plants against carbon imbalances, yet their partitioning between storage and soluble pools remains elusive at global scales. Here, we compiled a dataset of starch to soluble sugar ratio (St : Su) for 308 woody species across 220 sites world-wide and introduce a dimensionless index that integrates storage and demand while minimizing methodological artifacts. St : Su was strongly associated with growth, identifying it as a key axis of carbon allocation. Foliage consistently exhibited lower St : Su than lignified organs, reflecting a division between transient and conservative pools. Conifers accumulated more starch in foliage but less in stems relative to angiosperms, while leaf habits and mycorrhizal associations further modulated organ-specific strategies. Contrary to expectation, foliar and root St : Su varied little among biomes, but stems exhibited higher ratios in tropical rainforests than in boreal or arid regions, reflecting differences in species composition and adaptive storage under disturbance. Phylogeny constrained stem storage, whereas climatic variability, rather than mean conditions, dominated allocation in leaves and roots. These findings establish St : Su as a robust functional trait linking allocation strategies, growth, and resilience, which can be used to improve vegetation model prediction of forest productivity and mortality under climate variability.

Li, Weibin [Lanzhou Univ. (China)] (ORCID:00000001↗

DOE OSTI2020

Performance Simulation and Analysis of Occupancy-Based Control for Office Buildings with Variable-Air-Volume Systems

Variable-air-volume (VAV) systems are used in many office buildings. The minimum airflow rate setting of VAV terminal boxes has a significant impact on both energy consumption and indoor air quality. Conventional controls usually have the terminal’s minimum airflow rate at a constant (e.g., 30% or more of the terminal design airflow rate), irrespective of the occupancy status, which may cause problems, such as excessive simultaneous heating and cooling, under ventilation, and thermal comfort issues. This paper examines the potential of energy savings from occupancy-based controls (OBCs). The sensed occupancy information, either occupant presence or people count, is used to determine the airflow rate of terminal boxes, the thermostat setpoints, and the lighting control. Using EnergyPlus, a whole-building energy modeling software, the energy savings of OBC strategies are evaluated for representative existing medium office buildings in the U.S. The simulation results show that the conventional OBC, based on occupant presence sensing, can save 8% of whole-building energy use in Miami (hot climate) for systems without air-side economizer and about 13% in both Baltimore (mixed climate) and Chicago (cold climate). Comparatively, the advanced OBC, based on people counting, can save 8% in Miami to 23% in Baltimore for systems with economizers. The outdoor-air fraction of the supply air from air-handling units significantly affects the potential energy savings from the advanced OBC strategy. In addition to energy savings, the advanced OBC satisfies the zone ventilation during all occupied hours over the whole year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Distribution of genetic variation underlying adult migration timing in steelhead of the Columbia River basin

Abstract Fish migrations are energetically costly, especially when moving between freshwater and saltwater, but are a viable strategy for Pacific salmon and trout ( Oncorhynchus spp.) due to the advantageous resources available at various life stages. Anadromous steelhead ( O. mykiss ) migrate vast distances and exhibit variation for adult migration phenotypes that have a genetic basis at candidate genes known as greb1L and rock1 . We examined the distribution of genetic variation at 13 candidate markers spanning greb1L , intergenic, and rock1 regions versus 226 neutral markers for 113 populations ( n = 9,471) of steelhead from inland and coastal lineages in the Columbia River. Patterns of population structure with neutral markers reflected genetic similarity by geographic region as demonstrated in previous studies, but candidate markers clustered populations by genetic variation associated with adult migration timing. Mature alleles for late migration had the highest frequency overall in steelhead populations throughout the Columbia River, with only 9 of 113 populations that had a higher frequency of premature alleles for early migration. While a single haplotype block was evident for the coastal lineage, we identified multiple haplotype blocks for the inland lineage. The inland lineage had one haplotype block that corresponded to candidate markers within the greb1L gene and immediately upstream in the intergenic region, and the second block only contained candidate markers from the intergenic region. Haplotype frequencies had similar patterns of geographic distribution as single markers, but there were distinct differences in frequency between the two haplotype blocks for the inland lineage. This may represent multiple recombination events that differed between lineages where phenotypic differences exist between freshwater entry versus arrival timing as indicated by Micheletti et al. (2018a). Redundancy analyses were used to model environmental effects on allelic frequencies of candidate markers, and significant variables were migration distance, temperature, isothermality, and annual precipitation. This study improves our understanding of the spatial distribution of genetic variation underlying adult migration timing in steelhead as well as associated environmental factors and has direct conservation and management implications.

Collins, Erin E.↗

DOE OSTI2026

Bioorthogonal Click Chemistry for Antibody-Free Profiling of Acetylation, Propionylation, and Butyrylation in Pseudomonas aeruginosa and Methicillin-Resistant Staphylococcus aureus

Lysine acylation is a posttranslational modification (PTM) conserved in all domains of life and is essential for regulating diverse biological processes. Traditional methods for investigating acylation rely on anti-acyl-lysine antibodies, which are costly and time-consuming and often exhibit variable affinity. To remedy these pitfalls, we developed an antibody-free method for bacterial acylome enrichment using bioorthogonal click chemistry coupled with tandem mass spectrometry. We applied this approach to the pathogens Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus (MRSA) to explore the biological significance of acylation in each organism. We characterized the acetylome, propionylome, and butyrylome in P. aeruginosa UCBPP-PA14 and the acetylome and propionylome in MRSA. Comparative analyses revealed unique PTM dynamics showing that acylation regulated a wide range of cellular functions, including metabolism, antibiotic resistance, virulence, and stress response. This work establishes the first antibody-free enrichment method for defining bacterial acylomes and provides new insight into global lysine acylation networks in pathogenic bacteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Performance Considerations for Ground Source Heat Pumps in Cold Climates: Preprint

Remote, cold climates present challenges to finding safe and affordable options to heat homes. In Alaska, residential ground source heat pumps (GSHPs) have been gaining in popularity to fill this gap. However, there is little research on their long-term performance or effect on soil temperatures. The extended heating season and cold soils of Alaska provide a harsh testing ground for GSHPs, even those designed and marketed for colder climates. The large and unbalanced heating load of cold climates creates a challenging environment for GSHPs. In 2013 the Cold Climate Housing Research Center (CCHRC) installed a GSHP at its Research and Testing Facility (RTF) in Fairbanks, Alaska. The heat pump replaced an oil-fired condensing boiler heating a 464 m2 office space via an in-floor hydronic radiant heating system. The ground heat exchanger (GHE) was installed in moisture-rich silty soils underlain with permafrost near 0°C. The intent of the installation was to observe and monitor the system over a 10-year period in order to develop a better understanding of the performance of GSHPs in sites with permafrost and to help inform future design. As of this writing, the heat pump system has been running for seven heating seasons. The efficiency in those seven heating seasons has been variable with ups and downs that have been difficult to explain. This paper seeks to understand the variability in performance as well as make recommendations for GSHP use in other cold climates.

cold climate↗

DOE OSTI2023

PMEL Passive Acoustics Research: Quantifying the Ocean Soundscape from Whales to Wave Energy

Passive acoustic monitoring of the global ocean has increased dramatically over the last decade, providing insights into seasonal sea ice and wind/wave variability, biodiversity, geophysical hazards, and anthropogenic noise impacts. All of these phenomena are sentinels of marine ecosystem health and ocean climate change. Recognizing the utility of underwater sound, the Pacific Marine Environmental Laboratory (PMEL) formed a passive acoustic research program with the goal of quantifying deep-ocean and coastal soundscapes in support of NOAA’s mission to conserve and manage marine ecosystems. PMEL Acoustics Program researchers have built a stable of novel ocean technologies, including autonomous stationary hydrophones, mobile platforms, and near-real-time surface buoys with satellite communication capability. These passive acoustic monitoring systems have been deployed in every major ocean basin on Earth, enabling significant advancements in understanding of natural and anthropogenic sounds. This progress includes evaluation of human-made sound levels across US waters, observations of ship noise fluctuations during the COVID-19 pandemic, and evaluation of noise levels from offshore wave-energy devices. Progress in natural sound research includes assessment of seasonal variability in the presence of endangered cetacean species due to population recovery and/or changing ocean temperatures as well as early detection of the collapse of an Antarctic ice shelf.

54 ENVIRONMENTAL SCIENCES↗