Search NASA⌕ Search

SEARCH · Search NASA

Results for “Corona model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The Physical Interpretation of X-Ray Phase Lags and Coherence: RXTE Observations of Cygnus X-1 as a Case Study

There have been a number of recent spectral models that have been successful in reproducing the observed X-ray spectra of galactic black hole candidates (GBHC). However, there still exists controversy over such issues as: what are the sources of hard radiation, what is the system's geometry, is the accretion efficient or inefficient, etc. A potentially powerful tool for distinguishing among these possibilities, made possible by the Rossi X-ray Timing Explorer (RXTE), is the variability data, especially the observed phase lags and variability coherence. These data, in conjunction with spectral modeling, have the potential of determining physical sizes of the system, as well as placing strong constraints on both Compton corona and advection models. As an example, we present RXTE variability data of Cygnus X-1.

Nowak, M. A.↗

Energy balance in the solar transition region. II - Effects of pressure and energy input on hydrostatic models

The radiation of energy by hydrogen lines and continua in hydrostatic energy-balance models of the transition region between the solar chromosphere and corona is studied using models which assume that mechanical or magnetic energy is dissipated in the hot corona and is then transported toward the chromosphere down the steep temperature gradient of the transition region. These models explain the average quiet sun and also the entire range of variability of the Ly-alpha lines. The relations between the downward energy flux, the pressure of the transition region, and the different hydrogen emission are described.

Fontenla, J. M.↗

X-ray resonance scattering in a spherically symmetric coronal model

In the solar corona the opacities of some of the prominent X-ray emission lines are on the order of tau of about I over typical coronal path lengths. A particular solution of the radiative transfer problem involving an extended, spherically symmetric coronal shell radiating isotropic, homogeneous emission in which single-scattering also takes place is presented and discussed. Within the context of this simplified model, it is found that scattered radiation is an important contribution to the total emergent resonance line flux and that for the He-like family of resonance (r), intercombination (i), and forbidden (f) lines, the ratio G = (f + i)/r would decrease as a function of optical depth for disk-center emission in an extended spherically symmetric corona.

Haisch, B. M.↗

Comparison of solar flare X-ray producing and escaping electrons from about 2 to 100 keV

Using observations from the ISEE-3 spacecraft, the X-ray producing electrons and escaping electons from a solar flare on November 8, 1978 are compared. The instantaneous 5 to 75 keV electron spectrum in the X-ray producing region is computed from the observed bremsstrahlung X-ray spectrum. Assuming that energy loss by Coulomb collisions (thick target) is the dominant electron loss process, the accelerated electron spectrum is obtained. The energy spectrum of the escaping electrons observed from 2 to 100 keV differs significantly from the spectra of the X-ray producing electrons and of the accelerated electrons, even when the energy loss which the escaping electrons experienced during their travel from the sun to the earth is taken into account. The observations are consistent with a model where the escaping electons come from an extended X-ray producing region, which ranges from the chromosphere to high in the corona. In this model, the low energy escaping electrons (2-10 keV) come from the higher part of the extended X-ray source where the overlying column density is low, while the high energy electrons (20-100 keV) come from the entire X-ray source.

Pan, L.-D.↗

Structure and dynamics of the coronal magnetic field

The last few years have seen a marked increase in the sophistication of models of the solar corona. This has been brought about by a confluence of three key elements. First, the collection of high-resolution observations of the Sun, both in space and time, has grown tremendously. The SOHO (Solar Heliospheric Observatory) mission is providing additional correlated high-resolution magnetic, white-light and spectroscopic observations. Second, the power and availability of supercomputers has made two- and three-dimensional modeling routine. Third, the sophistication of the models themselves, both in their geometrical realism and in the detailed physics that has been included, has improved significantly. The support from our current Space Physics Theory grant has allowed us to exploit this confluence of capabilities. We have carried out direct comparisons between observations and models of the solar corona. The agreement between simulated coronal structure and observations has verified that the models are mature enough for detailed analysis, as we will describe. The development of this capability is especially timely, since observations obtained from three space missions that are underway (Ulysses, WIND and SOHO) offer an opportunity for significant advances in our understanding of the corona and heliosphere. Through this interplay of observations and theory we can improve our understanding of the Sun. Our achievements thus far include progress modeling the large-scale structure of the solar corona, three-dimensional models of active region fields, development of emerging flux and current, formation and evolution of coronal loops, and coronal heating by current filaments.

VanHoven, Gerard↗

STITCH: A Subgrid-Scale Model for Energy Buildup in the Solar Corona

The solar corona routinely exhibits explosive activity, in particular coronal mass ejections and their accompanying eruptive ares, that have global-scale consequences. These events and their smaller counterparts, coronal jets, originate in narrow, sinuous lament channels. The key processes that form and evolve the channels operate on still smaller spatial scales and much longer time scales, culminating in a vast separation of characteristic lengths and times that govern these explosive phenomena. In this article, we describe implementation and tests of an efficient subgrid-scale model for generating eruptive structures in magnetohydrodynamics (MHD) coronal simulations. STITCH {STatistical InjecTion of Condensed Helicity { is a physics-based, reduced representation of helicity condensation: a process wherein small-scale vortical surface convection forms ubiquitous current sheets, and pervasive reconnection across the sheets mediates an inverse cascade of magnetic helicity and free energy, thereby forming the lament channels. We have developed a formalism, STITCH, that abstracts these complex processes into a single term in Ohm's law and the induction equation that directly injects tangential magnetic flux into the low corona. We show that our approach is in very good agreement with a full helicity-condensation calculation that treats all of the dynamics explicitly, while enabling substantial reductions in temporal duration and spatial resolution. In addition, we illustrate the flexibility of STITCH at forming localized lament channels and at energizing complex surface flux distributions that have sinuous boundaries. STITCH is simple to implement and computationally ecient, making it a powerful technique for physics-based modeling of solar eruptive events.

J T Dahlin↗

Impacts of Non-Simultaneous Global Photospheric Magnetic Measurements on Coronal and Solar Wind Modeling

The intensity and arrival time of coronal mass ejections (CMEs) can be significantly influenced by the background solar wind encountered as they propagate outward from the Sun into the interplanetary medium. In addition, solar energetic particles (SEPs) race ahead of CME shock fronts and flare regions along magnetic field lines largely determined by the background solar wind. Predicting the solar wind accurately is therefore critical for improving forecasts of CMEs, SEPs, and high-speed streams. Modeling of the corona and solar wind is challenging in general, as it is highly dependent on global photospheric magnetic field maps, which serve as the boundary conditions to all coronal models that drive solar wind models. Unfortunately, less than half of the Sun’s photospheric magnetic field is reliably measured from any given vantage point and thus it is common for the maps to have highly dated and unreliable measurements in them. While Solar Obiter (SolO) now provides for the first time the opportunity to have simultaneous measurements of nearly the entire surface magnetic field of Sun (e.g., when SolO/PHI measurements are combined with those from SDO/HMI), the required alignment to accomplish this occurs only occasionally. Further, coronal models are extremely sensitive to the strengths of the polar magnetic fields of the Sun, which remain poorly observed. Recently, efforts to mitigate this problem include using flux transport models such as the Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model, which evolves the field forward in time using well known transport processes occurring on the Sun. However, it cannot account for the emergence of new magnetic flux without direct observations. The ESA VIGIL mission will eventually provide continuous observations from the L5, and the proposed SunCHASER mission will likewise do this at the L4 vantage point should it be funded. Ultimately, what is needed is a constellation of spacecraft distributed around the Sun with magnetographs that continuously measure the global surface magnetic field. In this talk, we discuss how the lack of simultaneous global measurements of the photospheric magnetic field adversely impacts the predictive performance of coronal and solar wind models.

C. Nick Arge↗

Temperature and density structure of the corona and inner solar wind

A combined theoretical and observational approach is used to construct models of the inner corona applicable to quiet open-field regions and coronal holes. These models, extending from the top of the transition region at about 1.003 solar radii out to 3 solar radii, are calculated by employing parameters that describe the coronal geometry and heating. Thermal conductivity, heating, radiative losses, and solar-wind convection are included in the full energy-balance equation, which is integrated to obtain density and temperature models; the unknown heating term is parameterized in terms of the mechanical flux incident at the base and the characteristic scale height for the dissipation of this flux; and boundary conditions at the base are fixed by EUV-derived models of the transition region. Two representative models, one for a coronal hole and one for a quiet region, are examined in detail as illustrative examples of the technique used. It is noted that the models obtained predict most of the pertinent observations reasonably well but significantly overestimate the radio emission at 80 and 160 MHz and significantly underestimate the intensity of the Fe XV line at 284 A, especially in coronal holes.

Kopp, R. A.↗

Unified Models of Turbulence and Nonlinear Wave Evolution in the Extended Solar Corona and Solar Wind

The PI (Cranmer) and Co-I (A. van Ballegooijen) made significant progress toward the goal of building a "unified model" of the dominant physical processes responsible for the acceleration of the solar wind. The approach outlined in the original proposal comprised two complementary pieces: (1) to further investigate individual physical processes under realistic coronal and solar wind conditions, and (2) to extract the dominant physical effects from simulations and apply them to a one-dimensional and time-independent model of plasma heating and acceleration. The accomplishments in the report period are thus divided into these two categories: 1a. Focused Study of Kinetic MHD Turbulence. We have developed a model of magnetohydrodynamic (MHD) turbulence in the extended solar corona that contains the effects of collisionless dissipation and anisotropic particle heating. A turbulent cascade is one possible way of generating small-scale fluctuations (easy to dissipate/heat) from a pre-existing population of low-frequency Alfven waves (difficult to dissipate/heat). We modeled the cascade as a combination of advection and diffusion in wavenumber space. The dominant spectral transfer occurs in the direction perpendicular to the background magnetic field. As expected from earlier models, this leads to a highly anisotropic fluctuation spectrum with a rapidly decaying tail in the parallel wavenumber direction. The wave power that decays to high enough frequencies to become ion cyclotron resonant depends on the relative strengths of advection and diffusion in the cascade. For the most realistic values of these parameters, though, there is insufficient power to heat protons and heavy ions. The dominant oblique waves undergo Landau damping, which implies strong parallel electron heating. We thus investigated the nonlinear evolution of the electron velocity distributions (VDFs) into parallel beams and discrete phase-space holes (similar to those seen in the terrestrial magnetosphere) which are an alternate means of heating protons via stochastic interactions similar to particle-particle collisions. 1b. Focused Study of the Multi-Mode Detailed Balance Formalism. The PI began to explore the feasibility of using the "weak turbulence," or detailed-balance theory of Tsytovich, Melrose, and others to encompass the relevant physics of the solar wind. This study did not go far, however, because if the "strong" MHD turbulence discussed above is a dominant player in the wind's acceleration region, this formalism is inherently not applicable to the corona. We will continue to study the various published approaches to the weak turbulence formalism, especially with an eye on ways to parameterize nonlinear wave reflection rates. 2. Building the Unified Model Code Architecture. We have begun developing the computational model of a time-steady open flux tube in the extended corona. The model will be "unified" in the sense that it will include (simultaneously for the first time) as many of the various proposed physical processes as possible, all on equal footing. To retain this generality, we have formulated the problem in two interconnected parts: a completely kinetic model for the particles, using the Monte Carlo approach, and a finite-difference approach for the self-consistent fluctuation spectra. The two codes are run sequentially and iteratively until complete consistency is achieved. The current version of the Monte Carlo code incorporates gravity, the zero-current electric field, magnetic mirroring, and collisions. The fluctuation code incorporates WKJ3 wave action conservation and the cascade/dissipation processes discussed above. The codes are being run for various test problems with known solutions. Planned additions to the codes include prescriptions for nonlinear wave steepening, kinetic velocity-space diffusion, and multi-mode coupling (including reflection and refraction).

Cranmer, Steven R.↗

Coronal Magnetic Field Topology and Source of Fast Solar Wind

We have developed a steady state, 2D semi-empirical MHD model of the solar corona and the solar wind with many surprising results. This model for the first time shows, that the boundary between the fast and the slow solar wind as observed by Ulysses beyond 1 AU, is established in the low corona. The fastest wind observed by Ulysses (680-780 km/s) originates from the polar coronal holes at 70 -90 deg. latitude at the Sun. Rapidly diverging magnetic field geometry accounts for the fast wind reaching down to a latitude of +/- 30 deg. at the orbit of Earth. The gradual increase in the fast wind observed by Ulysses, with latitude, can be explained by an increasing field strength towards the poles, which causes Alfven wave energy flux to increase towards the poles. Empirically, there is a direct relationship between this gradual increase in wind speed and the expansion factor, f, computed at r greater than 20%. This relationship is inverse if f is computed very close to the Sun.

Guhathakurta, M.↗

Radiative dominated cooling of the flare corona and transition region

Models in which radiation dominates cooling flare loops are investigated. The radiative models are found to predict a differential emission measure (Q) proportional to T to the (l+1) power, where l measures the dependence of the radiative loss coefficient on temperature, lamda (T) approximately T to the (-l) power. It is concluded that the radiative models are incapable of explaining the observed temperature dependence of Q for flare coronal and transitional plasma. The models suggest that large mass motions (velocities of the order of the sound speed) may be required.

Antiochos, S. K.↗

The structure of Io's thermal corona and implications for atmospheric escape

A steady-state model of Io's exospheric corona and its interaction with the Io plasma torus is used to study the escape of species from Io's atmosphere. It is found that atmospheric sputtering is the major escape mechanism for models in which the plasma flow reaches the critical level, and that such models produce total mass-loading rates an order of magnitude larger than values inferred from observations. The results suggest the presence of an extended Na coronal component in the thermal exosphere, and are consistent with an O-dominated corona, an exospheric temperature of about 1000 K, an Na critical level mixing ratio of 0.001, and a critical level radius of about 1.5 Io radii.

Summers, M. E.↗

Eight-moment approximation solar wind models

Heat conduction from the corona is important in the solar wind energy budget. Until now all hydrodynamic solar wind models have been using the collisionally dominated gas approximation for the heat conductive flux. Observations of the solar wind show particle distribution functions which deviate significantly from a Maxwellian, and it is clear that the solar wind plasma is far from collisionally dominated. We have developed a numerical model for the solar wind which solves the full equation for the heat conductive flux together with the conservation equations for mass, momentum, and energy. The equations are obtained by taking moments of the Boltzmann equation, using an 8-moment approximation for the distribution function. For low-density solar winds the 8-moment approximation models give results which differ significantly from the results obtained in models assuming the gas to be collisionally dominated. The two models give more or less the same results in high density solar winds.

Olsen, Espen Lyngdal↗

Realistic 3D Radiative Modeling of Turbulent Structure of Moderate-Mass Stars and Sun

Understanding the turbulent dynamics of the Sun and stars is a critical element for interpreting observed processes and phenomena on different scales and for predicting extreme events such as flares and super flares. High-­‐resolution observations of the Sun and high-­‐fidelity radiative MHD numerical simulations have substantially advanced our understanding of solar and stellar local dynamics and magnetism from the upper convection zone to the atmosphere and corona. However, global modeling of the Sun with such a high degree of realism is currently not affordable due to the extremely high computational cost of resolving the scales in the convection zone. The physics of the deep solar dynamics can be effectively addressed through modeling more massive solar-­‐type stars where the convection zone is shallower and the convective overturning time is much shorter than those on the Sun. We present recent 3D realistic simulation results of moderate-­‐mass stars and discuss links between solar and stellar dynamics, such as the multiscale structure of granulation, convective overshoot, and others. In particular, these simulations have provided better understanding of the dynamics of the tachocline (the overshoot layer at the bottom of the convection zone) and have explained long-­‐ standing results from helioseismology.

Realistic↗

The X-ray corona of Procyon

X-ray emission from the nearby system Procyon A/B (F5 IV + DF) was detected, using the IPC (Imaging Proportional Counter) on board the Einstein Observatory. Analysis of the X-ray pulse height spectrum suggests that the observed X-ray emission originates in Procyon A rather than in the white dwarf companion Procyon B, since the derived X-ray temperature, log T = 6.2, agrees well with temperatures found for quiescent solar X-ray emission. Modeling Procyon's corona with loops characterized by some apex temperature Tmax and emission length scale L, it is found that Tmax is well constrained, but L, and consequently the filling factor of the X-ray emitting gas, are essentially unconstrained even when EUV emission from the transition region is included in the analysis.

Schmitt, J. H. M. M.↗