SEARCH · Search NASA

Results for “Corrected equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1988

The ionization structure of planetary nebulae. VIII - NGC 6826

Spectrophotometric observations of emission-line intensities over the spectral range 1400 to 1700 A were made in seven positions in the planetary nebulae NGC 6826. The O(++) electron temperature varies little from 8900 K throughout the nebula; the Balmer continuum electron temperature averages 1500 K higher. The wavelength 4267 C II line intensities imply C(++) abundances that are systematically higher than those determined from the wavelength 1906, 1909 C III lines, but because of uncertainties in the intensities of the ultraviolet lines relative to the optical ones, this discrepancy is less conclusively demonstrated in NGC 6826 than in other planetaries in this series. Standard equations used to correct for the existence of elements in other than the optically observable ionization stages give results that are consistent and also in approximate agreement with abundances calculated using ultraviolet lines in the few cases where the relevant ultraviolet lines are measurable. The results of the logarithmic abundances differ somewhat from the recent study by Aller and Czyzak, in part because their measured electron temperatures are somewhat higher. The Ar, Ne, and, to some extent, O and S abundances appear to be somewhat low, suggesting that the progenitor to NGC 6826 like that to NGC 7662, may have formed out of somewhat metal-poor material.

Barker, Timothy↗

NASA NTRS1988

The ionization structure of planetary nebulae. 9: NGC 1535

Spectrophotometric observations of emission-line intensities over the spectral range 1400 to 7200 A were made in five positions in the planetary nebula NGC 1535. There is some evidence for variation in the Balmer decrements between these positions. The O(++) electron temperature varies little from 11500 K across these positions; the Balmer continuum electron temperature averages a few hundred K higher than this, but this difference is insignificant when compared to the measurement errors. As found for most of the other planetaries in this series, the wavelength 4267 C II line intensity near the central star implies a C(++) abundance that is several times higher that that determined from the wavelength 1906, 1909 C III lines. The discrepancy again decreases with increasing distance from the central star, again suggesting that the excitation mechanism for the wavelength 4267 C II is not understood. Standard equations used to correct for the existence of elements in other than the optically observable ionization stages give consistent results for the different positions; there is no evidence for any abundance gradient in the nebula. The logarithmic abundances are He = 10.99, O = 8.51, N = 7.63, Ne = 7.89, C = 8.34, and Ar = 6.08. The abundances agree well with determinations by Aller and Czyzak and by Torres-Peimbert and Peimbert and are nearly identical to those found for NGC 6826. As for NGC 6826, the rather low abundances of He, N, and C suggest that there was little if any mixing of CNO-processed material into the nebular shell in the progenitor to NGC 1535. The O, Ne, Ar abundances appear to be somewhat low, suggesting that the progenitor to NGC 1535 may have formed out of somewhat metal-poor material.

Barker, Timothy↗

NASA NTRS1989

The dynamics of domain walls and strings

The leading order finite-width corrections to the equation of motion describing the motion of a domain wall are derived. The regime in which this equation of motion is invalid is discussed. Spherically and cylindrically symmetric solutions to this equation of motion are found. A misconception that has arisen in recent years regarding the rigidity (or otherwise) of cosmic strings is also clarified.

Gregory, Ruth↗

NASA NTRS1989

The ionization structure of planetary nebulae 10: NGC 2392

Spectrophotometric observations of emission-line intensities over the spectral range 1400 to 7200 A were made in six positions in the planetary nebula NGC 2392. Standard equations used to correct for the existence of elements in other than the optically observable ionization stages give consistent results for the different positions that are in excellent agreement with abundances calculated using ultraviolet lines, and there is no evidence for any abundance gradient in the nebula. The logarithmic abundances agree well with determinations by Aller and Keyes.

Barker, Timothy↗

NASA NTRS1991

The ionization structure of planetary nebulae. X - NGC 2392

Barker, Timothy↗

NASA NTRS1993

Improved solar models constructed with a formulation of convection for stellar structure and evolution calculations without the mixing-length theory approximations

We have updated a previous attempt to incorporate within a solar model a treatment of convection based upon numerical simulations of convection rather than mixing-length theory (MLT). We have modified our formulation of convection for a better treatment of the kinetic energy flux. Our solar model has been updated to include a complete range of OPAL opacities, the Debye-Hueckel correction to the equation of state, helium diffusion due to gravitational settling, and atmospheres by Kurucz. We construct a series of models using both MLT and our revised formulation of convection and the compared results to measurements of the solar radius, the solar luminosity, and the depth of the solar convection zone as inferred from helioseismology. We find X(solar) = 0.702 +/- 0.005, Y(solar) = 0.278 +/- 0.005, and Z(solar) = 0.0193 +/- 0.0005.

Lydon, Thomas J.↗

NASA NTRS2000

An Evaluation of an Analytical Simulation of an Airplane with Tailplane Icing by Comparison to Flight Data

This report presents the assessment of an analytical tool developed as part of the NASA/FAA Tailplane Icing Program. The analytical tool is a specialized simulation program called TAILSM4 which was developed to model the effects of tailplane icing on the flight dynamics Twin Otter Icing Research Aircraft. This report compares the responses of the TAILSIM program directly to flight test data. The comparisons should be useful to potential users of TAILSIM. The comparisons show that the TAILSIM program qualitatively duplicates the flight test aircraft response during maneuvers with ice on the tailplane. TAILSIM is shown to be quantitatively "in the ballpark" in predicting when Ice Contaminated Tailplane Stall will occur during pushover and thrust transition maneuvers. As such, TAILSIM proved its usefulness to the flight test program by providing a general indication of the aircraft configuration and flight conditions of concern. The aircraft dynamics are shown to be modeled correctly by the equations of motion used in TAILSIM. However, the general accuracy of the TAILSIM responses is shown to be less than desired primarily due to inaccuracies in the aircraft database. The high sensitivity of the TAILSIM program responses to small changes in load factor command input is also shown to be a factor in the accuracy of the responses. A pilot model is shown to allow TAILSIM to produce more accurate responses and contribute significantly to the usefulness of the program. Suggestions to improve the accuracy of the TAILSIM responses are to further refine the database representation of the aircraft aerodynamics and tailplane flowfield and to explore a more realistic definition of the pilot model.

Hiltner, Dale W.↗

NASA NTRS2000

Inertial Effects in Suspension Dynamics

The present work analyses the dynamics of a suspension of heavy particles in shear flow. The magnitude of the particle inertia is given by the Stokes number St = m(gamma/6(pi)a, which is the ratio of the viscous relaxation time of a particle tau(sub p) = m=6pi(eta)a to the flow time gamma(sup -1). Here, m is the mass of the particle, a is its size, eta is the viscosity of the suspending fluid and gamma is the shear rate. The ratio of the Stokes number to the Reynolds number, Re = (rho)f(gamma)a(exp 2)/eta, is the density ratio rho(sub p)/rho(sub f). Of interest is to understand the separate roles of particle (St) and fluid (Re) inertia in the dynamics of suspensions. In this study we focus on heavy particles, rho(sub p)/rho(sub f) much greater than 1, for which the Stokes number is finite, but the Reynolds number is sufficiently small for inertial forces in the fluid to be neglected; thus, the fluid motion is governed by the Stokes equations. On the other hand, the probability density governing the statistics of the suspended particles satisfies a Fokker-Planck equation that accounts for both configuration and momentum coordinates, the latter being essential for finite St. The solution of the Fokker-Planck equation is obtained to O(St) via a Chapman-Enskog type-procedure, and the conditional velocity distribution so obtained is used to derive a configuration-space Smoluchowski equation with inertial corrections. The inertial effects are responsible for asymmetry in the relative trajectories of two spheres in shear flow, in contrast to the well known symmetric structure in the absence of inertia. Finite St open trajectories in the plane of shear suffer a downward lateral displacement resulting from the inability of a particle of finite mass to follow the curvature of the zero-Stokes-number pathlines. In addition to the induced asymmetry, the O(St) inertial perturbation dramatically alters the nature of the near-field trajectories. The stable closed orbits (for St = 0) in the plane of shear now spiral in, approaching particle-particle contact in the limit. All trajectories starting from an initial offset of O(St(sup 1/2) or less (which remain open for St = 0) also spiral in. The asymmetry of the trajectories leads to a non-Newtonian rheology and diffusive behavior. The latter because a given particle (moving along a finite St open trajectory) suffers a net displacement in the transverse direction after a single interaction. A sequence of such uncorrelated displacements leads to the particle executing a random walk. The inertial diffusivity tensor is anisotropic on account of differing strengths of interaction in the gradient and vorticity directions. Since the entire region (constituting an in finite area) of closed orbits in the plane of shear spirals onto contact for #finite St, the latter represents a singular surface for the pair-distribution function. The exact form of the pair-distribution function at contact is still, however, indeterminate in the absence of non-hydrodynamic effects. It should also be noted that finite St non-rectilinear flows do not support a spatially uniform number density owing to the cross-streamline inertial migration of particles.

J. F. Brady↗

NASA NTRS2003

Computational Aeroacoustics: An Overview

An overview of recent advances in computational aeroacoustics (CAA) is presented. CAA algorithms must not be dispersive and dissipative. It should propagate waves supported by the Euler equations with the correct group velocities. Computation domains are inevitably finite in size. To avoid the reflection of acoustic and other outgoing waves at the boundaries of the computation domain, it is required that special boundary conditions be imposed at the boundary region. These boundary conditions either absorb all the outgoing waves without reflection or allow the waves to exit smoothly. High-order schemes, invariably, supports spurious short waves. These spurious waves tend to pollute the numerical solution. They must be selectively damped or filtered out. All these issues and relevant computation methods are briefly reviewed. Jet screech tones are known to have caused structural fatigue in military combat aircrafts. Numerical simulation of the jet screech phenomenon is presented as an example of a successful application of CAA.

Tam, Christopher K. W.↗

NASA NTRS2004

Evaluation of a Multigrid Scheme for the Incompressible Navier-Stokes Equations

A fast multigrid solver for the steady, incompressible Navier-Stokes equations is presented. The multigrid solver is based upon a factorizable discrete scheme for the velocity-pressure form of the Navier-Stokes equations. This scheme correctly distinguishes between the advection-diffusion and elliptic parts of the operator, allowing efficient smoothers to be constructed. To evaluate the multigrid algorithm, solutions are computed for flow over a flat plate, parabola, and a Karman-Trefftz airfoil. Both nonlifting and lifting airfoil flows are considered, with a Reynolds number range of 200 to 800. Convergence and accuracy of the algorithm are discussed. Using Gauss-Seidel line relaxation in alternating directions, multigrid convergence behavior approaching that of O(N) methods is achieved. The computational efficiency of the numerical scheme is compared with that of Runge-Kutta and implicit upwind based multigrid methods.

Swanson, R. C.↗

NASA NTRS2016

Thruster-Specific Force Estimation and Trending of Cassini Hydrazine Thrusters at Saturn

The Cassini spacecraft has been in orbit around Saturn since 2004 and has since been approved for both a first and second extended mission. As hardware reaches and exceeds its documented life expectancy, it becomes vital to closely monitor hardware performance. The performance of the 1-N hydrazine attitude control thrusters is especially important to study, because the spacecraft is currently operating on the back-up thruster branch. Early identification of hardware degradation allows more time to develop mitigation strategies. There is no direct measure of an individual thruster's thrust magnitude, but these values can be estimated by post-processing spacecraft telemetry. This paper develops an algorithm to calculate the individual thrust magnitudes using Euler's equation. The algorithm correctly shows the known degradation in the first thruster branch, validating the approach. Results for the current thruster branch show nominal performance as of August, 2015.

Stupik, Joan↗

NASA NTRS2017

Verification of the Icarus Material Response Tool

Due to the complex physics encountered during reentry, material response solvers are used for two main purposes: improve the understanding of the physical phenomena; and design and size thermal protection systems (TPS). Icarus, is a three dimensional, unstructured material response tool that is intended to be used for design while maintaining the flexibility to easily implement physical models as needed. Because TPS selection and sizing is critical, it is of the utmost importance that the design tools be extensively verified and validated before their use. Verification tests aim at insuring that the numerical schemes and equations are implemented correctly by comparison to analytical solutions and grid convergence tests.

ablation↗

NASA NTRS1992

A near-wall two-equation model for turbulent heat fluxes

A near-wall two-equation model for turbulent heat fluxes is derived from the temperature variance and its dissipation-rate equations and the assumption of gradient transport. Only incompressible flows with non-buoyant heat transfer are considered. The near-wall asymptotics of each term in the exact equations are examined and used to derive near-wall correction functions that render the modeled equations consistent with these behavior. Thus modeled, the equations are used to calculate fully-developed pipe and channel flows with heat transfer. It is found that the proposed two-equation model yields asymptotically correct near-wall behavior for the normal heat flux, the temperature variance and its near-wall budget and correct limiting wall values for these properties compared to direct simulation data and measurements obtained under different wall boundary conditions.

Sommer, T. P.↗

NASA NTRS1976

Performance of a recoverable tug for planetary missions including use of perigee propulsion and corrections for nodal regression

Mathematical equations are derived by using the Maximum Principle to obtain the maximum payload capability of a reusable tug for planetary missions. The mathematical formulation includes correction for nodal precession of the space shuttle orbit. The tug performs this nodal correction in returning to this precessed orbit. The sample case analyzed represents an inner planet mission as defined by the declination (fixed) and right ascension of the outgoing asymptote and the mission energy. Payload capability is derived for a typical cryogenic tug and the sample case with and without perigee propulsion. Optimal trajectory profiles and some important orbital elements are also discussed.

Borsody, J.↗

NASA NTRS1976

Performance of a recoverable Tug for planetary missions including use of perigee propulsion and corrections for nodal regression

Mathematical equations are derived by using the Maximum Principle to obtain the maximum payload capability of a reusable Tug for planetary missions. The mathematical formulation includes correction for nodal precession of the Space Shuttle orbit. The Tug performs this nodal correction in returning to this precessed orbit. The sample case analyzed represents an inner planet mission as defined by the declination (fixed) and right ascension of the outgoing asymptote and the mission energy. Payload capability is derived for a typical cryogenic Tug and the sample case with and without perigee propulsion. Optimal trajectory profiles and some important orbital elements are also discussed.

Borsody, J.↗

NASA NTRS1999

On the Mechanism for a Gravity Effect Using Type 2 Superconductors

In this paper, we formulate a percent mass change equation based on Woodward's transient mass shift and the Cavendish balance equations applied to superconductor Josephson junctions, A correction to the transient mass shift equation is presented due to the emission of the mass energy from the superconductor. The percentage of mass change predicted by the equation was estimated against the maximum percent mass change reported by Podkletnov in his gravity shielding experiments. An experiment is then discussed, which could shed light on the transient mass shift near superconductor and verify the corrected gravitational potential.

Robertson, Glen A.↗

NASA NTRS2012

A Posteriori Study of a DNS Database Describing Super critical Binary-Species Mixing

Currently, the modeling of supercritical-pressure flows through Large Eddy Simulation (LES) uses models derived for atmospheric-pressure flows. Those atmospheric-pressure flows do not exhibit the particularities of high densitygradient magnitude features observed both in experiments and simulations of supercritical-pressure flows in the case of two species mixing. To assess whether the current LES modeling is appropriate and if found not appropriate to propose higher-fidelity models, a LES a posteriori study has been conducted for a mixing layer that initially contains different species in the lower and upper streams, and where the initial pressure is larger than the critical pressure of either species. An initially-imposed vorticity perturbation promotes roll-up and a double pairing of four initial span-wise vortices into an ultimate vortex that reaches a transitional state. The LES equations consist of the differential conservation equations coupled with a real-gas equation of state, and the equation set uses transport properties depending on the thermodynamic variables. Unlike all LES models to date, the differential equations contain, additional to the subgrid scale (SGS) fluxes, a new SGS term that is a pressure correction in the momentum equation. This additional term results from filtering of Direct Numerical Simulation (DNS) equations, and represents the gradient of the difference between the filtered pressure and the pressure computed from the filtered flow field. A previous a priori analysis, using a DNS database for the same configuration, found this term to be of leading order in the momentum equation, a fact traced to the existence of high-densitygradient magnitude regions that populated the entire flow; in the study, models were proposed for the SGS fluxes as well as this new term. In the present study, the previously proposed constantcoefficient SGS-flux models of the a priori investigation are tested a posteriori in LES, devoid of or including, the SGS pressure correction term. The present pressure-correction model is different from, and more accurate as well as less computationally intensive than that of the a priori study. The constant-coefficient SGS-flux models encompass the Smagorinsky (SMC), in conjunction with the Yoshizawa (YO) model for the trace, the Gradient (GRC) and the Scale Similarity (SSC) models, all exercised with the a priori study constant coefficients calibrated at the transitional state. The LES comparison is performed with the filtered- and-coarsened (FC) DNS, which represents an ideal LES solution. Expectably, an LES model devoid of SGS terms is shown to be considerably inferior to models containing SGS effects. Among models containing SGS effects, those including the pressure-correction term are substantially superior to those devoid of it. The sensitivity of the predictions to the initial conditions and grid size are also investigated. Thus, it has been discovered that, additional to the atmospheric-pressure models currently used, a new model is necessary to simulate supercritical-pressure flows. This model depends on the thermodynamic characteristics of the chemical species involved.

Bellan, Josette↗

DOE OSTI2026

Linear-Scaling Asymmetric Triples Correction through the Solution of the DLPNO–CCSD Lambda Equations: DLPNO–CCSD(T) Λ

In this research, we derive equations for solving for the stationary points of the DLPNO–CCSD Lagrangian, in the t 1 -transformed formalism introduced earlier and as currently implemented in the P SI 4 quantum chemistry software package. These lambda equations in the local pair natural orbital basis allow for the evaluation of CCSD(T) Λ energetics with linear-scaling computational effort, also known as the asymmetric triples correction. This DLPNO–CCSD(T) Λ method allows for accurate triples contributions to be computed for larger molecules, especially in cases that CCSD(T) is known to be insufficient, such as with multireference systems and bond-breaking systems. We showcase the accuracy of our code on reaction energies, barrier heights, and noncovalent interaction energies. Also showcased are the capabilities of our code by evaluating DLPNO–CCSD(T) Λ energetics on large noncovalent dimers up to 112 atoms, as well as a rhodium catalyst complex containing 66 atoms.

Cluster chemistry↗