Search NASA⌕ Search

SEARCH · Search NASA

Results for “DEGASSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Moon and earth - Compositional differences inferred from siderophiles, volatiles, and alkalis in basalts

A comparison of RNAA analyses of 18 trace elements in 25 low-Ti lunar and 10 terrestrial oceanic basalts indicated that the volatiles such as Ag, Bi, and Br are depleted in lunar basalts by nearly constant factors of 0.026 relative to terrestrial basalts. This constancy is not consistent with models that derive the moon's volatiles from partial recondensation of the earth's mantle or from partial degassing of a captured body; it is consistent with models which derive planetary volatiles from a thin veneer of C-chondrite material. Chalcogens (Se and Te) have almost constant and identical abundances in lunar and terrestrial basalts; siderophiles show abundant Ni in lunar basalts, while Ir, Re, Ge, and Au are depleted.

Wolf, R.↗

Meteoroid impact into short-period comet nuclei

The effects of extended meteoroid bombardment on short-period comet nuclei are examined and their possible implications for asteroid and meteorite studies are discussed. It is suggested that after devolatilization of the nucleus, the accumulated material might combine with primary cometary solids to produce environments conducive to the formation of polymict brecciated meteorites and to influence reflectance spectra of the asteroids. Such meteoroids removed from active nuclei during degassing could be placed in trajectories that might evolve into earth-crossing orbits.

Cintala, M. J.↗

Ar-40-Ar-39 and Rb-Sr age determinations on Quaternary volcanic rocks

Ages of leucite and biotite separates from samples of the potassic volcanics of the Roman Comagmatic region are derived by the stepwise degassing variant of the Ar-39-Ar-40 dating method and compared with those derived from Rb-Sr dating in order to evaluate the abilities of the methods to date Quaternary geological events. Six of the leucite separates are found to contain Ar with very high bulk 40/36 ratios and to have well correlated Ar-40 and Ar-39 contents, yielding ages of approximately 338,000 years. Two leucites observed to contain Ar with lower bulk 40/36 ratios and Ar-40/Ar-36 ratios significantly lower than atmospheric are found to have ages in substantial agreement with those of the other leucites despite the uncertainty in the composition of the trapped component. Ages obtained for the biotites are not as precise as those of the leucites, due to difficulties in obtaining a good separation of in situ radiogenic Ar-40 from trapped Ar-40. Ages determined from Rb-Sr measurements for selected tuff samples are found to be in good agreement with the Ar-40-Ar-39 ages of the leucites. Results demonstrate the possibility of attaining precisions of better than 5% in the dating of rocks 350,000 years old by both the Ar-40-Ar-39 and the Rb-Sr methods.

Radicati Di Brozolo, F.↗

Effect of vacuum processing on outgassing within an orbiting molecular shield

The limiting hydrogen number density in an orbiting molecular shield is highly dependent on the outgassing rates from the materials of construction for the shield, experimental apparatus, and other hardware contained within the shield. Ordinary degassing temperatures used for ultrahigh vacuum studies (less than 450 C) are not sufficient to process metals so that the contribution to the number density within the shield due to outgassing is less than the theoretically attainable level (approximately 200 per cu. cm). Pure aluminum and type 347 stainless steel were studied as candidate shield materials. Measurements of their hydrogen concentration and diffusion coefficients were made, and the effects of high temperature vacuum processing (greater than 600 C) on their resulting outgassing rates was determined. The densities in a molecular shield due to the outgassing from either metal were substantially less ( 0.003) than the density due to the ambient atomic hydrogen flux at an orbital altitude of 500 km.

Outlaw, R. A.↗

Influence of mineral oil and additives on microhardness and surface chemistry of magnesium oxide (001) surface

X-ray photoelectron spectroscopy analyses and hardness experiments were conducted with cleaved magnesium oxide /001/ surfaces. The magnesium oxide bulk crystals were cleaved into specimens along the /001/ surface, and indentations were made on the cleaved surface in laboratory air, in nitrogen gas, or in degassed mineral oil with and without an additive while not exposing specimen surface to any other environment. The various additives examined contained sulfur, phosphorus, chlorine, or oleic acid. The sulfur-containing additive exhibited the highest hardness and smallest dislocation patterns evidencing plastic deformation; the chlorine-containing additive exhibited the lowest hardness and largest dislocation patterns evidencing plastic deformation. Hydrocarbon and chloride (MgCl2) films formed on the magnesium oxide surface. A chloride film was responsible for the lowest measured hardness.

Miyoshi, K.↗

Nonmetallic materials handbook. Volume 2: Epoxy and silicone materials

Chemical and physical property test data obtained during qualification and receiving inspection testing of nonmetallic materials for the Viking Mars Lander program is presented. Thermochemical data showing degradation as a function of temperature from room temperature through 773 K is included. These data include activation energies for thermal degradation, rate constants, and exo- and/or endotherms. Thermal degradations carried out under vacuum include mass spectral data taken simultaneously during the decomposition. Many materials have supporting data such as condensation rates of degassed products and isothermal weight loss. Changes in mechanical, electrical, and thermal properties after exposure to 408 K in nitrogen for times ranging from 380 to 570 hours are included for many materials.

Podlaseck, S. E.↗

Derivation of a heterogeneous lithic fragment in the Bovedy L-group chondrite from impact-melted porphyritic chondrules

Results are presented of petrographic, compositional and dating analyses of a light-colored lithic fragment in the L-group Bovedy meteorite that has a composition different from that of the host chondrite. Polished thin sections of the lithic fragment, host, and the fragment-host boundary were examined microscopically and analyzed by electron microprobe, metallic Ni-Fe, and instrumental neutron activation techniques; chips of the fragment were also used for Ar-39/Ar-40 dating and oxygen isotope analyses. The poikilitic textures, olivine, low-Ca pyroxene and kamacite composition and low Na2O, K2O and P2O5 contents of the fragment indicate that it represents a solidified, slightly fractionated impact melt formed from a source rich in porphyritic chondrules. A progressive increase on MgO content across the fragment is accounted for by the heterogeneous nucleation of MgO-rich phases. The Ar data indicate that the Bovedy lithic fragment and its host were partly degassed of radiogenic Ar less than 0.94 billion years ago, probably due to shock. The data are consistent with a cooling rate of about 5 C/million years through 500 C, which must have resulted from the burial of the assemblage beneath insulating material on the parent body at depths of at least several km.

Rubin, A. E.↗

Ar-39/Ar-40 systematics of Allende inclusions

A laser microprobe was used to measure the Ar isotopic contents of individual mineral grains in four neutron-irradiated Allende samples: two coarse-grained Ca-Al-rich inclusions; one fine-grained Ca-Al-rich inclusion; and one sample with matrix and miscellaneous chondrules. The following K-Ar ages (G.y.) were obtained after degassing low Ar retentive sites by preheating the samples for one hour at 675 C: matrix, 3.5 + or - 0.2; three miscellaneous chondrules, 4.4 + or - 0.1, 4.0 + or - 0.1, and 4.4 + or - 0.1; and the fine-grained inclusion, 4.5 + or - 0.2. The minerals in the coarse-grained Ca-Al-rich inclusions have ubiquitous chlorine, less than 10 ppm K and apparent ages ranging upwards from 4.6 G.y. to well over 10 G.y. Possible explanations for these apparent ages are atmospheric contamination, the decay of K-40 prior to the formation of the solar system, and the trapping of radiogenic Ar-40 lost by the matrix.

Herzog, G. F.↗

Adsorption and excess fission Xe - Adsorption of Xe on vacuum crushed minerals

It is hypothesized that adsorption is not likely to provide a sufficiently precise mechanism for the concentration of excess fission Xe in the entire lunar regolith, in view of laboratory analogs of the lunar soil and calculations of the residence times of noble gases in the present day regolith. Lunar cold trap and episodic degassing models are difficult to reconcile, however, with the generality of excess fission Xe in all gas-rich highland breccias. It is concluded that the high Xe concentration in such highland breccias is not the result of Xe adsorption prior to the trapping of this component.

Bernatowicz, T. J.↗

Absence of silicic volcanism on Mars - Implications for crustal composition and volatile abundance

It is believed that explosive basic to ultrabasic eruptions may be responsible for small cinder conelike features on Mars and perhaps for the ancient flank-scoured paterae. Eruptions of this type may have been driven by near-surface water/ice-magma interactions or volatile rich magmas. Noting that the paterae represent a unique style of volcanism that stopped approximately 2 b.y. ago, it is suggested that the volatiles associated with these features were derived from mantle sources and that the cessation of patera formation may coincide with the termination of the period of maximum planetary degassing. Since approximately 2 b.y. ago volcanism has been dominantly effusive, except for such minor explosive ash events as those that blanketed part of the summit of Hecates Tholus. It is proposed that such eruptions were driven by volatiles generated by differentiation of a magma chamber, similar to Icelandic explosive eruptions.

Francis, P. W.↗

Lithification opf gas-rich chondrite regolith breccias by grain boundary and localized shock melting

The fine-grained matrices (less than 150 microns) of 14 gas-rich ordinary chondrile regolith breccias were studied in an attempt to decipher the nature of the lithification process that converted loose regolith material into consolidated breccias. It is found that there is a continuouos gradation in matrix textures from nearly completely clastic (class A) to highly cemented (class C) breccias in which the remining clasts are completely surrounded by interstitial, shock-melted material. It is concluded that this interstitial material is formed by shock melting in the porous regolith. In general, the abundances of solar-wind-implanted He-4 and Ne-20 are inversely correlated with the abundance of intenstitial, shock-melted, feldspathic material. Chondrites with the highest abundance of interstitial, melted material (class C) experienced the highest shock pressures and temperatures and suffered the most extensive degassing. It is this interstitial, feldspathic melt that lithifies and cements the breccias together; those breccias with very little interstitial melt (class A) are the most porous and least consolidated.

Bischoff, A.↗

Carbon and its isotopes in mid-oceanic basaltic glasses

Sample surface carbon, mantle carbon dioxide in vesicles, and mantle carbon dissolved in glasses, are the three carbon components evident in the 11 mid-oceanic basalts presently analyzed. The total carbon content may be controlled by the depth of the shallowest ridge magma chamber, and carbon isotopic fractionation accompanies magma degassing. Using He-3 and carbon data for submarine hydrothermal fluids, the present day midoceanic ridge carbon flux is approximately estimated to be 1.0 x 10 to the 13th g C/yr, requiring 8 Gyr to accumulate the earth's present crustal carbon inventory.

Des Marais, D. J.↗

Ultrasonic Mixing of Epoxy Curing Agents

New ultrasonic mixing technique used to mix several curing agents/epoxy combinations. Major component of commercially available base epoxy resin used in tetraglycidylmethylenedianiline (TGMDA). In ultrasonic mixing system cup holds resin and curing agent during acoustic excitation. Samples placed in cup with top to ultrasonic horn forming bottom of cup. Ultrasonically treated until amber colored and transparent. Because ultrasonic agitation drives out entrapped air, degassing not necessary before cure.

Hodges, W. T.↗

Submarine hydrothermal environments as sites for the origin and evolution of life

That life formed and evolved in hydrothermal environments is proposed. This hypothesis is plausible in terms of the tectonic, paleontological, and degassing history of the Earth. Submarine hydrothermal vents are the only contemporary geological environment which may truly be called primeval and which today continue to be a major source of gases and dissolved elements to the ocean. The microbial assemblages in present day hydrothermal systems therefore could be living analogues of the earliest microbial communities to develop on Earth. The evidence for the hypothesis is reviewed.

Hoffman, S.↗

Interrelationships among the terrestrial planets

The spatial distribution of mass in the solar system provides invaluable clues pertaining to the condensation history of the solar nebula, to the sequence of condensation of minerals and metal alloys in different P-T Regimes in the nebula and to the time sequence in the nucleation of planetary iron cores. Massive planets (Earth & Venus) were due to the twin processes of early nucleation of iron into massive cores and late termination of accretion processes which resulted in the accretion of volatile rich materials also. This paper maintains that the accretionary features (High-lands, basins/craters) are present on all the planets and the thermally controlled tectonic styles (Rifts, fracture zones, volcanic plains, Canyons, trenches, domes, etc.) are essentially of same origin but are of different magnitude and the interactions of degassed volatiles (atmosphere together with hydrosphere) with the lithosphere are dictating and diversifying the tectonic style on the Earth.

Rao, A. S. P.↗

Sulfide and sulfate saturation in hydrous silicate melts

A series of hydrothermal experiments was performed over a wide range of pressures, temperatures, oxygen fugacities, and melt FeO content, in order to examine the effects of physical changes on sulfur solubility in fractionated hydrous silicate melts. On the basis of the experimental results, it is concluded that upper crustal oxidation-reduction reactions and crystal fractionation processes may exert considerable influence on the amount of sulfur contained in magmas erupted at the surface. The application of the experimental results to investigations of volatile transport and volcanic degassing processes on the earth, Venus, and Mars is discussed

Carroll, M. R.↗

Impact melting of the Cachari eucrite 3.0 Gy ago

The chemical compositions and Ar-isotope gas-retention ages of host phase and glass veins in the Cachari eucrite are determined by microprobe and neutron-activation analysis and mass spectrometry, respectively. The results are presented in tables, graphs, and back-scattered electron images and characterized in detail. The compositions are found to support the thesis that the glass formed by shock melting of the host rock (or of rock having the same composition). The Ar-39/Ar-40 ages of host and glass are given as 3.04 + or - 0.07 Gyr and 3.47 + or - 0.04 Gyr, respectively; the former value is taken as the true data of melting, and the latter is attributed to incomplete postmelt degassing of Ar from the glass phase. The implications of the relative youth of this and other eucrites and howardites for the regolith history of the parent body are considered.

Bogard, D. D.↗

Laboratory simulation of meteoritic noble gases. II - Sorption of xenon on carbon: Etching and heating experiments

The release of trapped Xe from amorphous-C phases of meteorites is simulated experimentally by HNO3 etching of carbon-black and pyrolyzed polyvinylidene chloride samples exposed to Xe-127 for 0.5-240 h at 100-1000 C and then degassed for 9 h or more at the same temperatures, as reported by Wacker et al. (1985). The results are presented in tables and graphs and characterized in detail. Samples exposed at 100-200 C are found to lose most of their Xe after etching to a depth of only about 20 pm, while those exposed at 800-1000 C exhibit a second more tightly bound component extending to a depth of 3 nm, indicative of diffusion of Xe during exposure and resembling planetary Xe. The higher noble-gas concentrations measured in meteorites are attributed to rate-controlled Xe uptake over a long period in the solar nebula.

Zadnik, M. G.↗