Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Microstructure and corrosion behavior of cast Fe-B alloys dipped into liquid zinc bath

The corrosion behavior of cast Fe-B alloys in a liquid zinc bath was examined. As a result, the as-cast Fe-3.5B alloy displays the best corrosion resistance in all tested specimens owing to its netlike structure of eutectic Fe{sub 2}B against the liquid zinc. XRD and EDS results indicate that the main phases in the corrosion layer are determined to be {delta}, {zeta} and {eta} from the matrix to the zinc zone, respectively. The corrosion process is controlled by the diffusion of zinc atoms and the dissolution mechanism. According to the observations, only three steps occur in the whole dissolution process: the preferential dissolution of {alpha}-Fe, the formation of intermetallic compounds, and the spalling of Fe{sub 2}B caused by cracks that mainly result from the internal stress produced by Fe/Zn phase transformation. The continuous netlike Fe{sub 2}B phase delays the further reaction of Fe/Zn and hinders the diffusion of zinc atoms between the substrate and liquid zinc effectively, improving corrosion resistance of Fe-B alloy in comparison with 1Cr18Ni9Ti stainless steel.

36 MATERIALS SCIENCE↗

Formation of Fe2Al5-xZnx intermetallic crystals at the Fe-Zn interface in hot-dip galvanizing

Highlights: • Interstitial-free steels were galvanized in Zn baths containing 0.14-0.28 wt% Al. • The Fe-Al layer formed in a 0.14 wt% Al bath is composed of equiaxed Fe{sub 2}Al{sub 5-x}Zn{sub x} crystals without preferred orientations. • The layers formed in baths containing 0.18 wt% Al or more are composed of orientated domains. • Each domain contains 4-12 Fe{sub 2}Al{sub 5-x}Zn{sub x} crystal variants of specific orientations. • A layer of a single variant crystal can grow epitaxially on the α-Fe grains as the Al content reaches 0.28 wt%. - Abstract: The formation of Fe{sub 2}Al{sub 5-x}Zn{sub x} inhibition layer at the Fe-Zn interface has been characterized by scanning electron microscopy/electron backscatter diffraction and transmission electron microscopy for interstitial-free steels galvanized in Zn baths containing 0.14–0.28 wt% Al. The inhibition layer formed in the 0.14 wt% Al bath is composed of fine, equiaxed Fe{sub 2}Al{sub 5-x}Zn{sub x} crystals without preferred orientations. The inhibition layers formed in the baths containing 0.18 wt% Al or more are composed of orientated domains and each domain contains 4–12 Fe{sub 2}Al{sub 5-x}Zn{sub x} crystal variants of specific orientations. All the variants follow the same Fe{sub 2}Al{sub 5-x}Zn{sub x}/Fe orientation relationship of [110]{sub Fe2Al5-xZnx}//[1 1-bar 1]{sub Fe} and (001){sub Fe2Al5-xZnx}//(110){sub Fe}. Therefore, each domain is formed on a single α-Fe grain and the number of variants in the domain is determined by the orientation of the α-Fe grain. The fraction of the area of epitaxial growth increases with increasing Al content in bath. When the Al content reaches 0.28 wt%, a layer of a single variant (SV) crystal can grow epitaxially on the α-Fe grains having orientations distributed from <110> to <113> parallel to the normal direction of the sheet surface. The formation of a dense SV inhibition layer is the major reason for the drastic reductions in both the Al-pickup rate and the inhibition layer thickness at high Al content baths.

36 MATERIALS SCIENCE↗

Frequency-modulated atomic force microscopy operation by imaging at the frequency shift minimum: The dip-df mode

In frequency modulated non-contact atomic force microscopy, the change of the cantilever frequency (Δf) is used as the input signal for the topography feedback loop. Around the Δf(z) minimum, however, stable feedback operation is challenging using a standard proportional-integral-derivative (PID) feedback design due to the change of sign in the slope. When operated under liquid conditions, it is furthermore difficult to address the attractive interaction regime due to its often moderate peakedness. Additionally, the Δf signal level changes severely with time in this environment due to drift of the cantilever frequency f{sub 0} and, thus, requires constant adjustment. Here, we present an approach overcoming these obstacles by using the derivative of Δf with respect to z as the input signal for the topography feedback loop. Rather than regulating the absolute value to a preset setpoint, the slope of the Δf with respect to z is regulated to zero. This new measurement mode not only makes the minimum of the Δf(z) curve directly accessible, but it also benefits from greatly increased operation stability due to its immunity against f{sub 0} drift. We present isosurfaces of the Δf minimum acquired on the calcite CaCO{sub 3}(101{sup ¯}4) surface in liquid environment, demonstrating the capability of our method to image in the attractive tip-sample interaction regime.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Underground coal gasification field experiment in the high-dipping coal seams

In this article the experimental conditions and process of the underground gasification in the Woniushan Mine, Xuzhou, Jiangsu Province are introduced, and the experimental results are analyzed. By adopting the new method of long-channel, big-section, and two-stage underground coal gasification, the daily gas production reaches about 36,000 m{sup 3}, with the maximum output of 103,700 m{sup 3}. The daily average heating value of air gas is 5.04 MJ/m{sup 3}, with 13.57 MJ/m{sup 3} for water gas. In combustible compositions of water gas, H{sub 2} contents stand at over 50%, with both CO and CH{sub 4} contents over 6%. Experimental results show that the counter gasification can form new temperature conditions and increase the gasification efficiency of coal seams.

01 COAL, LIGNITE, AND PEAT↗

A POSSIBLE SIGNATURE OF LENSE-THIRRING PRECESSION IN DIPPING AND ECLIPSING NEUTRON-STAR LOW-MASS X-RAY BINARIES

Relativistic Lense-Thirring precession of a tilted inner accretion disk around a compact object has been proposed as a mechanism for low-frequency ({approx}0.01-70 Hz) quasi-periodic oscillations (QPOs) in the light curves of X-ray binaries. A substantial misalignment angle ({approx}15 Degree-Sign -20 Degree-Sign ) between the inner-disk rotation axis and the compact-object spin axis is required for the effects of this precession to produce observable modulations in the X-ray light curve. A consequence of this misalignment is that in high-inclination X-ray binaries the precessing inner disk will quasi-periodically intercept our line of sight to the compact object. In the case of neutron-star systems, this should have a significant observational effect, since a large fraction of the accretion energy is released on or near the neutron-star surface. In this Letter, I suggest that this specific effect of Lense-Thirring precession may already have been observed as {approx}1 Hz QPOs in several dipping/eclipsing neutron-star X-ray binaries.

79 ASTRONOMY AND ASTROPHYSICS↗

Tube dimpling tool assures accurate dip-brazed joints

Portable, hand-held dimpling tool assures accurate brazed joints between tubes of different diameters. Prior to brazing, the tool performs precise dimpling and nipple forming and also provides control and accurate measuring of the height of nipples and depth of dimples so formed.

Beuyukian, C. S.↗

Dip molding to form intricately-shaped medical elastomer devices

Preshaped mandrel mounted on rotating mechanism is partically immersed in tank filled with liquid elastomer. While mandrel rotates, elastomer film forms om mandrel surface due to surface tension and capillary behavior of liquid. Devices with well-defined flanges can be made using process.

Broyles, H. F.↗

DIP extractor simplifies circuit removal

Easily constructed tool can be used to pull dual in-line packaged integrated circuits off printed-wiring boards without damaging pins. Extractor can be designed for most popular IC configurations and sizes.

Nies, T.↗