Search NASA⌕ Search

SEARCH · Search NASA

Results for “Digital Faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Landscape Evolution, A Comparison of Form and Process

This project's goals were to collect, analyze and interpret 3-dimensional physiographic data for understanding the processes responsible for landscape modification. The primary landforms to be studied were Neogene cinder cones in Arizona (San Francisco Volcanic Field (SFVF), Coconino and Kaibab National Forests, Arizona). We also obtained and are still analyzing digital topographic data for the Long Valley-White Mountains area of California, which display Quaternary normal fault scarps, as well as extensive evidence of degradation. The work resulted in a large database of measured rates of downslope transport of slope debris. It was hypothesized that the work would increase our understanding of process-response models of hillslope degradation, and of the effects of climate change and other parameters on degradation rates. In greater detail, our primary goal was to compare evolutionary sequences of hillslopes, as exemplified by the topography of landforms of the same type but of different ages, with measurements of the surficial processes active on the landforms. Assuming that other parameters, such as hillslope materials and vegetation are held constant, and that the effects of changing climate are negligible, then the sediment transport rates measured today on the landforms should be the same as those calculated from the inversion of landform topography by use of a diffusion-type model. However, if the effects of changing climate or other factors are not negligible, then the observed transport rates would differ from those which must be invoked to explain the current topography. We hypothesized in fact that because degradation on the event scale is highly transient and localized, we would find a wide divergence between modern, measured transport rates, and rates calculated by global landform inversion or modeling. Because of the length of time involved in collection of sufficient data on current degradation rates, we are still continuing to analyse and interpret the data. Completion of the work will increase our understanding of the potential effects of anthropogenic climate and surficial change on the Earth's solid surface, and possibly allow us to constrain paths of hill-slope evolution following anthropogenic modifications, as well as compare the short-term with the long-term rates of hillslope degradation.

Bursik, Marcus I.↗
NASA NTRS1999

Ion Thruster and Power Processor Developed for the Deep Space 1 Mission

The NASA Solar Electric Propulsion Technology Applications Readiness (NSTAR) Program has provided a single-string primary propulsion system to NASA's Deep Space 1 spacecraft. This spacecraft will carry about 81 kg of xenon propellant for the ion thruster, which can be throttled down from 2.3 to 0.5 kW as the spacecraft moves away from the Sun. The propellant load will provide about 20 months of propulsion at the one-half power throttle setpoint of 1.2 kW. This mission will validate the 2.5-kW ion propulsion system and will fly by the asteroid 1992 KD in 1999. If funding permits, Deep Space 1 also will encounter comets Wilson-Harrington and Borrelly in 2001. NASA Lewis Research Center's On-Board Propulsion Branch was responsible for the development of the 30-cm-diameter ion thruster, the 2.5-kW power processor unit (PPU), and the Digital Control and Interface Unit (DCIU) that controls the PPU/thruster/feed system and provides data and recovery from fault conditions. Lewis transferred the thruster and PPU technologies to the Hughes Electron Dynamics Division, which was selected to build two sets of flight thrusters, as well as the PPU's and DCIU's. Hughes subcontracted the DCIU development to Spectrum Astro Incorporated. The Jet Propulsion Laboratory (JPL) was primarily responsible for the NSTAR project management, thruster lifetests, the feed system, diagnostics, and the propulsion subsystem integration. A total of four engineering model thrusters and three breadboard PPU's were built, integrated, and tested. More than 50 development tests were conducted along with thruster design verification tests of 2000 and 1000 hours. In addition, an 8000-hr life demonstration test was successfully completed and demonstrated wear-rates consistent with full-power lifetimes in excess of 12,000 hours.

Sovey, James S.↗
NASA NTRS1994

The Buffer Diagnostic Prototype: A fault isolation application using CLIPS

This paper describes problem domain characteristics and development experiences from using CLIPS 6.0 in a proof-of-concept troubleshooting application called the Buffer Diagnostic Prototype. The problem domain is a large digital communications subsystems called the real-time network (RTN), which was designed to upgrade the launch processing system used for shuttle support at KSC. The RTN enables up to 255 computers to share 50,000 data points with millisecond response times. The RTN's extensive built-in test capability but lack of any automatic fault isolation capability presents a unique opportunity for a diagnostic expert system application. The Buffer Diagnostic Prototype addresses RTN diagnosis with a multiple strategy approach. A novel technique called 'faulty causality' employs inexact qualitative models to process test results. Experimental knowledge provides a capability to recognize symptom-fault associations. The implementation utilizes rule-based and procedural programming techniques, including a goal-directed control structure and simple text-based generic user interface that may be reusable for other rapid prototyping applications. Although limited in scope, this project demonstrates a diagnostic approach that may be adapted to troubleshoot a broad range of equipment.

Porter, Ken↗
NASA NTRS1975

Fault tectonics and earthquake hazards in the Peninsular Ranges, Southern California

The author has identified the following significant results. Thin sections of rock exposed along the San Diego River linear were prepared and determined to be fault breccia. Single band and ratio images of the western Mojave Desert were prepared from the multispectral scanner digital tapes. Subtle differences in color of soil and rock are enhanced on the ratio images. Two north-northeast trending linears (Horsethief Canyon and Pine Valley Creek) and an east-west linear (Pine Creek) were concluded to have resulted from erosion along well-developed foliation in crystalline basement rocks.

Merifield, P. M.↗
NASA NTRS1993

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design.

Source record↗
NASA NTRS1995

DRS: Derivational Reasoning System

The high reliability requirements for airborne systems requires fault-tolerant architectures to address failures in the presence of physical faults, and the elimination of design flaws during the specification and validation phase of the design cycle. Although much progress has been made in developing methods to address physical faults, design flaws remain a serious problem. Formal methods provides a mathematical basis for removing design flaws from digital systems. DRS (Derivational Reasoning System) is a formal design tool based on advanced research in mathematical modeling and formal synthesis. The system implements a basic design algebra for synthesizing digital circuit descriptions from high level functional specifications. DRS incorporates an executable specification language, a set of correctness preserving transformations, verification interface, and a logic synthesis interface, making it a powerful tool for realizing hardware from abstract specifications. DRS integrates recent advances in transformational reasoning, automated theorem proving and high-level CAD synthesis systems in order to provide enhanced reliability in designs with reduced time and cost.

Bose, Bhaskar↗
NASA NTRS2001

Fundamentals of Digital Engineering: Designing for Reliability

The concept of designing for reliability will be introduced along with a brief overview of reliability, redundancy and traditional methods of fault tolerance is presented, as applied to current logic devices. The fundamentals of advanced circuit design and analysis techniques will be the primary focus. The introduction will cover the definitions of key device parameters and how analysis is used to prove circuit correctness. Basic design techniques such as synchronous vs asynchronous design, metastable state resolution time/arbiter design, and finite state machine structure/implementation will be reviewed. Advanced topics will be explored such as skew-tolerant circuit design, the use of triple-modular redundancy and circuit hazards, device transients and preventative circuit design, lock-up states in finite state machines generated by logic synthesizers, device transient characteristics, radiation mitigation techniques. worst-case analysis, the use of timing analyzer and simulators, and others. Case studies and lessons learned from spaceflight designs will be given as examples

Katz, R.↗
NASA NTRS1986

All-digital jets are taking off

The functions and advantages of second-generation digital avionics systems are described. These digital systems have increased integration, increased reliability and flexibility, and improved man-machine interface, and they provide increases in the mean time between removal of line-replacable units and fuel savings. Different redundant processors and software are utilized to achieve fault-tolerance performance of flight control systems. The improved landing capabilities, front-panel instruments, sidestick controllers, back-lighted liquid-crystal displays, and fly-by-wire system possible with digital avionics are examined. The applications of digital avionics to military and commercial aircraft are discussed and examples are provided.

Spitzer, C. R.↗
NASA NTRS1981

Neotectonics of the San Andreas Fault system: Basin and range province juncture

A thorough evaluation of all LANDSAT coverage of the study area (considering atmospheric clarity, seasonal aspects, specific swath location, and digital quality) resulted in the selection of two consecutive (continuously recorded) scenes for detailed analyses. The acquisition of HCMM and SEASAT imagery as well as high altitude U-2 uniform coverage is being considered. A bibliography of previous geological studies and methodological examples is estimated to be 70% complete.

Estes, J. E.↗
NASA NTRS1973

Iron-absorption band analysis for the discrimination of iron-rich zones

The author has identified the following significant results. Study has concentrated on the two primary aspects of the project, structural analysis through evaluation of lineaments and circular features and spectral analyses through digital computer-processing techniques. Several previously unrecognized lineaments are mapped which may be the surface manifestations of major fault or fracture zones. Two of these, the Walker Lane and the Midas Trench lineament system, transect the predominantly NNE-NNW-trending moutain ranges for more than 500 km. Correlation of major lineaments with productive mining districts implies a genetic relationship, the 50 circular or elliptical features delineated suggest a related role for Tertiary volcanism. Color-ratio composites have been used to identify limonitic zones and to discriminate mafic and felsic rock by combing diazo color transparencies of three different ratios. EROS Data Center scene identification number for color composite in this report is ER 1 CC 500. Refinement of enhancement procedures for the ratio images is progressing. Fieldwork in coordination with both spectral and structural analyses is underway.

Rowan, L. C.↗
NASA NTRS2005

Geometry of Thrust Faults Beneath Amenthes Rupes, Mars

Amenthes Rupes is a 380 km-long lobate fault scarp located in the eastern hemisphere of Mars near the dichotomy boundary. The scarp is marked by about 1 km of vertical separation across a northeast dipping thrust fault (top to the SW) and offsets heavily-cratered terrain of Late Noachian age, the visible portion of which was in place by 3.92 Ga and the buried portion in place between 4.08 and 4.27 Ga. The timing of scarp formation is difficult to closely constrain. Previous geologic mapping shows that near the northern end of Amenthes Rupes, Hesperian age basalts terminate at the scarp, suggesting that fault slip predated the emplacement of these flows at 3.69 to 3.9 Ga. Maxwell and McGill also suggest the faulting ceased before the final emplacement of the Late Hesperian lavas on Isidis Planitia. The trend of the faults at Amenthes, like many thrust faults at the dichotomy boundary, parallels the boundary itself. Schultz and Watters used a dislocation modeling program to match surface topography and vertical offset of the scarp at Amenthes Rupes, varying the dip and depth of faulting, assuming a slip of 1.5 km on the fault. They modeled faulting below Amenthes Rupes as having a dip of between 25 and 30 degrees and a depth of 25 to 35 km, based on the best match to topography. Assuming a 25 degree dip and surface measurements of vertical offset of between 0.3 and 1.2 km, Watters later estimated the maximum displacement on the Amenthes Rupes fault to be 2.90 km. However, these studies did not determine the geometry of the thrust using quantitative constraints that included shortening estimates. Amenthes Rupes deforms large preexisting impact craters. We use these craters to constrain shortening across the scarp and combine this with vertical separation to infer fault geometry. Fault dip was also estimated using measurements of scarp morphology. Measurements were based on 460 m (1/128 per pixel) digital elevation data from the Mars Orbiter Laser Altimeter (MOLA), an instrument on the Mars Global Surveyor (MGS) satellite.

Vidal, A.↗
NASA NTRS1988

The PAWS and STEM reliability analysis programs

The PAWS and STEM programs are new design/validation tools. These programs provide a flexible, user-friendly, language-based interface for the input of Markov models describing the behavior of fault-tolerant computer systems. These programs produce exact solutions of the probability of system failure and provide a conservative estimate of the number of significant digits in the solution. PAWS uses a Pade approximation as a solution technique; STEM uses a Taylor series as a solution technique. Both programs have the capability to solve numerically stiff models. PAWS and STEM possess complementary properties with regard to their input space; and, an additional strength of these programs is that they accept input compatible with the SURE program. If used in conjunction with SURE, PAWS and STEM provide a powerful suite of programs to analyze the reliability of fault-tolerant computer systems.

Butler, Ricky W.↗
NASA NTRS1999

A Digital Tectonic Activity Map of the Earth

The subject of neotectonics, covering the structures and structural activity of the last 5 million years (i.e., post-Miocene) is a well-recognized field, including "active tectonics," focussed on the last 500,000 years in a 1986 National Research Council report of that title. However, there is a cartographic gap between tectonic maps, generally showing all features regardless of age, and maps of current seismic or volcanic activity. We have compiled a map intended to bridge this gap, using modern data bases and computer-aided cartographic techniques. The maps presented here are conceptually descended from an earlier map showing tectonic and volcanic activity of the last one million years. Drawn by hand with the National Geographic Society's 1975 "The Physical World" map as a base, the 1981 map in various revisions has been widely reproduced in textbooks and various technical publications. However, two decades of progress call for a completely new map that can take advantage of new knowledge and cartographic techniques. The digital tectonic activity map (DTM), presented in shaded relief (Fig. 1) and schematic (Fig. 2) versions, is the result. The DTM is intended to show tectonism and volcanism of the last one million years, a period long enough to be representative of global activity, but short enough that features such as fault scarps and volcanos are still geomorphically recognizable. Data Sources and Cartographic Methods The DTM is based on a wide range of sources, summarized in Table 1. The most important is the digital elevation model, used to construct a shaded relief map. The bathymetry is largely from satellite altimetry, specifically the marine gravity compilations by Smith and Sandwell (1996). The shaded relief map was designed to match the new National Geographic Society world physical map (1992), although drawn independently, from the digital elevation model. The Robinson Projection is used instead of the earlier Van der Grinten one. Although neither conformal nor equal-area, the Robinson Projection provides a reasonable compromise and retains useful detail at high latitudes.

Lowman, Paul↗
NASA NTRS2024

Analysis of faults and pit chains in Noctis Labyrinthus: Implications for early extension and possible magmatic plumbing

Noctis Labyrinthus has been a region of disputed origin due to its complexity and poor understanding of how various processes and mechanisms may have combined to form it. The surface is an integrated record of intensive tectonic activity expressed by a multiple extended sets of dip-slip faults oriented in different directions, and thought to have acted on this region over its history. These faults are always coalescent to pits and pit chains displaying a complicated geological history in the region. To understand this geological history, we mapped the surface features in Noctis Labyrinthus using the High-Resolution Stereo Camera (HRSC) onboard Mars Express ND2 nadir channel basemaps, and we adapted the Digital Terrain Map (DTM) from the Mission Experiment Gridded Data Record (MEGDR) of Mars Orbiter Laser Altimeter (MOLA) onboard Mars Global Surveyor (MGS) for the topography. We have investigated the spatial distribution and trend of fault systems, the pit chains' morphology, and the correlation between these two types of features. Our results show three fault systems: i) NS and NNE-SSW, ii) EW and ENE-WSW, and iii) NNW-SSE and NW. The analysis of the faults trending, cross-cutting correlation and the superimposition led to identify multiple intersections between these faults that have been alongside with the reactivations of some inherited faults. We interpreted the first system of fault to be related to coeval lateral extension, generated by regional stress tensor, which is probably related to the slight bending of Valles Marineris within two phases of bidirectional extension. The second system of faults has been generated by the radial oblate stress tensor related to the formation of the small shield volcanoes in Syria Planum. However, the third system is likely related to the external driving process, probably in the Tharsis province. We classified pits in four evolutionary stages based on their morphometric attributes. We believe that the formation of the pit chains in Noctis Labyrinthus is related to a surface collapse after a pressure drop related to the magma chamber deflation associated with Syria Planum volcanic province. We propose a deformational model based on early extension and magmatic plumbing as driving processes for the formation of Noctis Labyrinthus.

Mayssa El Yazidi↗
NASA NTRS1990

Battery test expert systems

The characteristics of NIHBES (nickel-hydrogen battery expert system) are described, with attention also given to NICBES-2 (nickel-cadmium battery expert system-2). The nickel-hydrogen battery testbed is set up almost identically to the nickel-cadmium battery testbed, with the exceptions of no battery protection and reconditioning circuits (BPRCs) and the frequency of transmission of data. The Ni-H2 testbed has no BPRCs and the data are transmitted every 30 s instead of every minute. An expert system shell was chosen to develop this particular expert system. The GoldWorks expert system shell from Gold Hill Computers was chosen for the task. NIHBES will extract the desired data and return fault diagnosis, status and advice, and decision support. Expert systems have been proven to be viable tools in the control and monitoring of space power systems. Presently, the DDAS (digital data acquisition system) monitors and controls the orbit time, and is responsible for limit checking, data acquisition, and data summaries. It is concluded that in the future control of the Hubble Space Telescope breadboard will be passed to NIHBES. NIHBES will be more beneficial to the testbed than the DDAS alone due to the limitations of the DDAS. The DDAS cannot provide long-term trend analysis, plotting capability, fault diagnosis, or advice.

Johnson, Yvette B.↗
NASA NTRS1979

Teletype test unit

Device may be used to facilitate testing and fault isolation in teletype and modem systems that are used for communication by people who having hearing disabilities. Unit uses CMOS digital integrated circuitry which may be operated from relatively inexpensive battery of any voltage from 3 to 18 volts.

Couch, R. H.↗
NASA NTRS1985

The SIFT hardware/software systems. Volume 1: A detailed description

This report contains a detailed description of the software implemented fault-tolerant computer's operating system and hardware subsystems. The Software Implemented Fault-Tolerant (SIFT) computer system was developed as an experimental vehicle for fault-tolerant systems research. The SIFT effort began with broad, in-depth studies stating the reliability and processing requirements for digital computers which would, in the aircraft of the 1990's, control flight-critical functions.

Palumbo, Daniel L.↗
NASA NTRS1988

Analytical sensor redundancy assessment

The rationale and mechanization of sensor fault tolerance based on analytical redundancy principles are described. The concept involves the substitution of software procedures, such as an observer algorithm, to supplant additional hardware components. The observer synthesizes values of sensor states in lieu of their direct measurement. Such information can then be used, for example, to determine which of two disagreeing sensors is more correct, thus enhancing sensor fault survivability. Here a stability augmentation system is used as an example application, with required modifications being made to a quadruplex digital flight control system. The impact on software structure and the resultant revalidation effort are illustrated as well. Also, the use of an observer algorithm for wind gust filtering of the angle-of-attack sensor signal is presented.

Mulcare, D. B.↗