SEARCH · Search NASA

Results for “Distortion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1973

The effects of inlet temperature and pressure distortion on turbojet performance

The effects on stability of steady-state, 180 degree extent circumferential distortions of inlet total temperature and pressure were experimentally determined for a turbojet engine. Results for both individual and combined temperature and pressure distortions are presented showing the losses incurred in stall pressure ratio and are compared with results predicted using a simplified parallel compressor model. The loss due to combined distortions was dependent upon the relative orientation between the low pressure and high temperature regions. Reasonable agreement was achieved between the predicted and observed loss in stall pressure ratio when based on a constant corrected speed relationship.

Braithwaite, W. M.↗

NASA NTRS1972

Correction of perceived first-order distortions in holography.

Consideration of the problem of distortion posed by a long-wavelength hologram as a three-dimensional display to be viewed by an observer who is included in the distortion problem. The effects of holographic distortion upon the observer's image perception are examined. The inclusion of the visual perception process into the description of holographic imagery necessarily complicates the analysis, but at the same time increases the degrees of freedom by which the image can be altered. It is shown that these additional degrees of freedom make it possible to overcome the problem of unequal longitudinal and lateral magnification.

Winter, D. C.↗

NASA NTRS1973

Experimental evaluation of a TF30-P-3 turbofan engine in an altitude facility: Effect of steady-state temperature distortion

The effects of circumferential distortion of the total temperature entering 25, 50, and 75 percent of the inlet circumferential annulus of a turbofan engine were determined. Complete compressor stall resulted from distortions of from 14 to 20 percent of the face averaged temperature. Increasing the temperature level in one sector resulted in that sector moving toward stall by decreasing the equivalent rotor speeds while the pressure ratio remained approximately constant. Stall originated as a rotating zone in the low-pressure compressor which resulted as a terminal stall in the high-pressure compressor. Decreasing the Reynolds number index to 0.25 from 0.5 reduced the required distortion for stall by 50 percent for the conditions investigated.

Braithwaite, W. M.↗

NASA NTRS1973

Distortion of the microwave blackbody background radiation implied by the baryon-symmetric cosmology of omnes and the galaxy formation theory of Stecker and Puget

Theories on the distortion of microwave black body spectrum are presented. Data suggest that continuous annihilation of matter-antimatter, during all stages of universe evolution cause distortion by thermal energy distribution at red shifts less than 10,000. Data also show distortions in the Rayleigh-Jeans spectrum are caused by energy depositions at red shifts between 10,000 and 1,000 while those in the Wien spectrum are due to energy deposition at lower red shifts after the cosmic gas cools to its atomic state and thermalization does not take place properly.

Stecker, F. W.↗

NASA NTRS1974

Summary of recent investigations of inlet flow distortion effect on engine stability

A review is presented of recent experimental results, analytical procedures and test techniques employed to evaluate the effects of inlet flow distortion on the stability characteristics of representative afterburning turbofan and turbojet compression systems. Circumferential distortions of pressure and temperature, separately and in combination are considered. Resulting engine sensitivity measurements are compared with predictions based on simplified parallel compressor models and with several distortion descriptor parameters.

Graber, E. J., Jr.↗

NASA NTRS1974

Analog computer implementation of four instantaneous distortion indices

Dynamic distortion data obtained from inlet engine compatibility test on a J85-GE-13 engine are used to establish the feasibility of using on-line generated indices as control signals. These data are analyzed over time increments of 1.3 seconds on an analog computer. The analog program of four instantaneous distortion indices and their results are presented. A modified approach in determining the extent of distortion is also presented.

Costakis, W. G.↗

NASA NTRS1973

The effect of inlet temperature and pressure distortion on turbojet performance

Braithwaite, W. M.↗

NASA NTRS1974

Summary of recent investigations of inlet flow distortion effects on engine stability

A review is presented of recent experimental results, analytical procedures and test techniques employed to evaluate the effects of inlet flow distortion on the stability characteristics of representative afterburning turbofan and turbojet compression systems. Circumferential distortions of pressure and temperature, separately and in combination, are considered. Resulting engine sensitivity measurements are compared with predictions based on simplified parallel compressor models and with several distortion descriptor parameters.

Graber, E. J., Jr.↗

NASA NTRS1975

Two-stage fan. 3: Data and performance with rotor tip casing treatment, uniform and distorted inlet flows

A two stage fan with a 1st-stage rotor design tip speed of 1450 ft/sec, a design pressure ratio of 2.8, and corrected flow of 184.2 lbm/sec was tested with axial skewed slots in the casings over the tips of both rotors. The variable stagger stators were set in the nominal positions. Casing treatment improved stall margin by nine percentage points at 70 percent speed but decreased stall margin, efficiency, and flow by small amounts at design speed. Treatment improved first stage performance at low speed only and decreased second stage performance at all operating conditions. Casing treatment did not affect the stall line with tip radially distorted flow but improved stall margin with circumferentially distorted flow. Casing treatment increased the attenuation for both types of inlet flow distortion.

Burger, G. D.↗

NASA NTRS1976

Modeling and analysis of the TF30-P-3 compressor system with inlet pressure distortion

Circumferential inlet distortion testing of a TF30-P-3 afterburning turbofan engine was conducted at NASA-Lewis Research Center. Pratt and Whitney Aircraft analyzed the data using its multiple segment parallel compressor model and classical compressor theory. Distortion attenuation analysis resulted in a detailed flow field calculation with good agreement between multiple segment model predictions and the test data. Sensitivity of the engine stall line to circumferential inlet distortion was calculated on the basis of parallel compressor theory to be more severe than indicated by the data. However, the calculated stall site location was in agreement with high response instrumentation measurements.

Mazzawy, R. S.↗

NASA NTRS1975

On Similarity Transformation and Geodetic Network Distortions Based on Doppler Satellite Observations

Models used in geodesy to transform two sets of coordinates are studied and distortions in geodetic networks are investigated. Commonly used transformation models are first reviewed and most of them are interpreted. Differences between various models are discussed. Pitfalls in partial solutions are then considered. It is shown that only as many chords and/or directional elements can be used in the computation as are needed to completely determine the size or shape of the polyhedron implied in the set of Cartesian coordinates. Each additional element causes the normal matrix to be singular provided that all correlations between the chords are used. A number of tables and maps indicating distortions in the NAD 27, Precise Traverse M-R '72, AUS, and SAD 69 geodetic datums are also included. The residuals of the coordinates are scanned for systematic patterns after transforming each geodetic system to the NWL9D Doppler system. Also, an attempt is made to show scale distortions in the NAD 27.

Leick, Alfred↗

NASA NTRS1976

The passage of a distorted velocity field through a cascade of airfoils

An analysis has been developed to predict the unsteady force and moment generated by the passage of a timewise periodic total pressure distortion through an arbitrary cascade of airfoils. The mathematical formulation of this analysis is based on the assumption that the magnitudes of the timewise fluctuations of the variables which describe the flow field are small compared to their time average values. This assumption permits the development of a linear unsteady perturbation analysis about a steady flow field. In addition to this linearization assumption the fluid medium is assumed to be incompressible and inviscid. The mathematical development begins by decomposing the velocity field surrounding an infinite cascade of airfoils into its irrotational and rotational components. The rotational component is associated with an upstream unsteady total pressure distortion and is defined in terms of the vorticity field associated with the distortion pattern. The irrotational component is further decomposed into a steady and unsteady part. A combined analytical and numerical procedure has been developed to solve the field equations which govern the rotational and irrotational velocity fields. Results of this analysis show a strong influence of mean loading on the unsteady force generated by the passage of a one dimensional gust through a cascade of compressor blades.

Adamczyk, J. J.↗

NASA NTRS1976

Heavy ions from the Galilean satellites and the centrifugal distortion of the Jovian magnetosphere

The Galilean satellites constitute a potentially significant source of plasma to the Jovian atmosphere. The paper examines the distortion of the Jovian magnetosphere that would result from injection of ions at the Galilean satellites. The magnetic distortion produced is a localized perturbation near the equatorial plane, in contrast to the large-scale distortion produced by Jovian atmospheric ions. The study estimates the relative perturbation currents resulting from the two sources in terms of the unknown ion production rate at the satellites. It is found that the two perturbations would be of comparable magnitudes if the ion source flux at all of the Galilean satellites were comparable to the photo-ion escape flux from Jupiter's atmosphere. More specifically, ions produced by the Galilean satellites should be confined near the equatorial plane of Jupiter's magnetosphere in a sheet whose thickness is determined by a centrifugal scale height given essentially by the ion thermal speed divided by the corotation frequency.

Hill, T. W.↗

NASA NTRS1978

Three-dimensional effects on pure tone fan noise due to inflow distortion

A theoretical analysis of pure tone fan noise generated by inflow distortion-rotor interaction is carried out with the aid of the three-dimensional unsteady lifting surface theory developed by Namba (1977, 1974). Particular attention is given to a study of the accuracy of available two-dimensional theory for the prediction of pure tone fan noise due to the interaction of inflow distortion with a subsonic annular blade row. The theoretical model considered consists of a single three-dimensional annular cascade rotating at constant angular velocity in an annular rigid-wall duct of infinite axial extent. Attention is given to the fluctuating pressure induced by a rotor blade row, the fluctuating velocity induced by it, an inflow distortion with only an axial velocity component, the determination of acoustic dipole distribution, the pure tone acoustic power, and two-dimensional theory and quasi-three-dimensional theory.

Kobayashi, H.↗

NASA NTRS1978

Estimating maximum instantaneous distortion from inlet total pressure rms measurements

In the present paper, a new mathematical model of inlet turbulence is developed by application of basic fluid dynamics and statistical concepts. The model provides an understanding of the turbulent inlet flow as well as a means of describing the flow in quantitative terms. Specifically, the maximum instantaneous distortion produced by inlet unsteady flow can be estimated by the simple measurement of rms data. Practical application of these techniques leads to a data/acquisition/reduction system that is at least one, and maybe two, orders of magnitude less expensive than conventional methods. Each data point can be reduced in terms of the mean strength of the turbulent vortices. By storing these two parameters (that are representative of the unsteady flow with the steady state information), the maximal instantaneous distortion can be reconstructed for other distortion factors at any time subsequent to the test.

Melick, H. C., Jr.↗

NASA NTRS1978

Measurements of inlet flow distortions in an axial flow fan (6 and 9 blade rotor)

A large quantity of experimental data on inlet flow distortions in an axial flow fan were obtained. The purpose of the study was to determine the effects of design and operating variables and the type of distortion on the response of an axial flow turbomachinery rotor. Included are background information and overall trends observed in distortion attenuation and unsteady total pressure losses.

Barr, L. C.↗

NASA NTRS1979

Experimental evaluation of the effect of inlet distortion on compressor blade vibrations

Compressor rotor strain gage data from an engine test conducted with an inlet screen distortion were reduced and analyzed. These data are compared to data obtained from the same engine without inlet pressure distortion to determine the net effect of the distortion on the vibratory response of the compressor blades. The results obtained are presented.

Lubomski, J. F.↗

NASA NTRS1979

Effect of number of probes and their orientation on the calculation of several compressor face distortion descriptors

A study was performed to determine the effects of the number and position of total pressure probes on the calculation of five compressor face distortion descriptors. This study used three sets of 320 steady state total pressure measurements that were obtained with a special rotating rake apparatus in wind tunnel tests of a mixed-compression inlet. The inlet was a one third scale model of the inlet on a YF-12 airplane, and it was tested in the wind tunnel at representative flight conditions at Mach numbers above 2.0. The study shows that large errors resulted in the calculation of the distortion descriptors even with a number of probes that were considered adequate in the past. There were errors as large as 30 and -50 percent in several distortion descriptors for a configuration consisting of eight rakes with five equal-area-weighted probes on each rake.

Stoll, F.↗