Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Stability Derivatives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Flight-Determined Subsonic Longitudinal Stability and Control Derivatives of the F-18 High Angle of Attack Research Vehicle (HARV) with Thrust Vectoring

The subsonic longitudinal stability and control derivatives of the F-18 High Angle of Attack Research Vehicle (HARV) are extracted from dynamic flight data using a maximum likelihood parameter identification technique. The technique uses the linearized aircraft equations of motion in their continuous/discrete form and accounts for state and measurement noise as well as thrust-vectoring effects. State noise is used to model the uncommanded forcing function caused by unsteady aerodynamics over the aircraft, particularly at high angles of attack. Thrust vectoring was implemented using electrohydraulically-actuated nozzle postexit vanes and a specialized research flight control system. During maneuvers, a control system feature provided independent aerodynamic control surface inputs and independent thrust-vectoring vane inputs, thereby eliminating correlations between the aircraft states and controls. Substantial variations in control excitation and dynamic response were exhibited for maneuvers conducted at different angles of attack. Opposing vane interactions caused most thrust-vectoring inputs to experience some exhaust plume interference and thus reduced effectiveness. The estimated stability and control derivatives are plotted, and a discussion relates them to predicted values and maneuver quality.

Iliff, Kenneth W.↗
NASA NTRS1973

On the dynamic stability of multilayer sandwich plates

Study of the dynamic stability of plates which are constructed of several alternating soft and hard layers and are subjected to time-dependent periodic in-plane loads. A theory that accounts for all of these effects is presented for multilayer sandwich plates. The plate thickness consists of (k - 1) orthotropic soft core layers sandwiched between k hard isotropic membrane layers, each of which may have a different thickness and elastic properties. It is assumed that the core layers carry only the transverse shear stresses, while the hard membrane layers carry the in-plane normal and shear stresses. The complementary variational principle for dynamics is used to derive the governing differential equations and the necessary boundary conditions for the dynamic stability of the sandwich plate. The equations governing the vibration of the plate and those governing its static stability are deduced from the more general equations for dynamic stability.

Salama, A. M.↗
NASA NTRS2010

Algorithm for Stabilizing a POD-Based Dynamical System

This algorithm provides a new way to improve the accuracy and asymptotic behavior of a low-dimensional system based on the proper orthogonal decomposition (POD). Given a data set representing the evolution of a system of partial differential equations (PDEs), such as the Navier-Stokes equations for incompressible flow, one may obtain a low-dimensional model in the form of ordinary differential equations (ODEs) that should model the dynamics of the flow. Temporal sampling of the direct numerical simulation of the PDEs produces a spatial time series. The POD extracts the temporal and spatial eigenfunctions of this data set. Truncated to retain only the most energetic modes followed by Galerkin projection of these modes onto the PDEs obtains a dynamical system of ordinary differential equations for the time-dependent behavior of the flow. In practice, the steps leading to this system of ODEs entail numerically computing first-order derivatives of the mean data field and the eigenfunctions, and the computation of many inner products. This is far from a perfect process, and often results in the lack of long-term stability of the system and incorrect asymptotic behavior of the model. This algorithm describes a new stabilization method that utilizes the temporal eigenfunctions to derive correction terms for the coefficients of the dynamical system to significantly reduce these errors.

Kalb, Virginia L.↗
NASA NTRS1975

Application of the comparison principle to analysis of nonlinear systems

A comparison principle based on a Kamke theorem and Lipschitz conditions is presented along with its possible applications and modifications. It is shown that the comparison lemma can be used in the study of such areas as classical stability theory, higher order trajectory derivatives, Liapunov functions, boundary value problems, approximate dynamic systems, linear and nonlinear systems, and bifurcation analysis.

Gunderson, R. W.↗
NASA NTRS1978

Considerations in the analysis of flight test maneuvers

This paper discusses the application of a maximum likelihood estimator to dynamic flight-test data. The information presented is based on the experience in the past twelve years at the NASA Dryden Flight Research Center of estimating stability and control derivatives from over 3,000 maneuvers from 32 aircraft. The overall approach to the analysis of dynamic flight-test data is discussed. Detailed requirements for data and instrumentation are discussed and several examples of the types of problems that may be encountered are presented.

Iliff, K. W.↗
NASA NTRS1989

Control-structure interaction in precision pointing servo loops

The control-structure interaction problem is addressed via stability analysis of a generic linear servo loop model. With the plant described by the rigid body mode and a single elastic mode, structural flexibility is categorized into one of three types: (1) appendage, (2) in-the-loop minimum phase, and (3) in-the-loop nonminimum phase. Closing the loop with proportional-derivative (PD) control action and introducing sensor roll-off dynamics in the feedback path, stability conditions are obtained. Trade studies are conducted with modal frequency, modal participation, modal damping, loop bandwidth, and sensor bandwidth treated as free parameters. Results indicate that appendage modes are most likely to produce instability if they are near the sensor rolloff, whereas in-the-loop modes are most dangerous near the loop bandwidth. The main goal of this paper is to provide a fundamental understanding of the control-structure interaction problem so that it may benefit the design of complex spacecraft and pointing system servo loops. In this framework, the JPL Pathfinder gimbal pointer is considered as an example.

Spanos, John T.↗
NASA NTRS1982

Damping seals for turbomachinery

A rotor seal is proposed that restricts leakage like a labyrinth seal, but extends the stabilizing speed range beyond twice the first critical speed. The dynamic parameters were derived from bulk flow equations without requiring a dominant axial flow. The flow is considered incompressible and turbulent. Damping seals are shown to be feasible for extending the speed range of high performance turbomachinery beyond the limit imposed by conventional seals.

Vonpragenau, G. L.↗
NASA NTRS1982

Methodology for determining elevon deflections to trim and maneuver the DAST vehicle with negative static margin

The relationships between elevon deflection and static margin using elements from static and dynamic stability and control and from classical control theory are emphasized. Expressions are derived and presented for calculating elevon deflections required to trim the vehicle in lg straight-and-level flight and to perform specified longitudinal and lateral maneuvers. Applications of this methodology are made at several flight conditions for the ARW-2 wing. On the basis of these applications, it appears possible to trim and maneuver the vehicle with the existing elevons at -15% static margin.

Perry, B., III↗
NASA NTRS1991

A time delay controller for magnetic bearings

The control of systems with unknown dynamics and unpredictable disturbances has raised some challenging problems. This is particularly important when high system performance needs to be guaranteed at all times. Recently, the Time Delay Control has been suggested as an alternative control scheme. The proposed control system does not require an explicit plant model nor does it depend on the estimation of specific plant parameters. Rather, it combines adaptation with past observations to directly estimate the effect of the plant dynamics. A control law is formulated for a class of dynamic systems and a sufficient condition is presented for control systems stability. The derivation is based on the bounded input-bounded output stability approach using L sub infinity function norms. The control scheme is implemented on a five degrees of freedom high speed and high precision magnetic bearing. The control performance is evaluated using step responses, frequency responses, and disturbance rejection properties. The experimental data show an excellent control performance despite the system complexity.

Youcef-Toumi, K.↗
NASA NTRS1988

Helicopter stability and control modeling improvements and verification on two helicopters

A linearized model of helicopter flight dynamics is developed which includes the flapping, lead-lag, and dynamic inflow degrees of freedom (DOF). The model is a combination of analytical terms and numerically determined stability derivatives, and is used to investigate the importance of the rotor DOF to stability and control modeling. The results show that the rotor DOF can have a significant impact on some of the natural modes in a linear model. The flap and dynamic inflow DOF show the greatest influence. Flapping exhibits strong coupling to the body, dynamic inflow, and to lead-lag to a lesser extent. Dynamic inflow tends to damp the high-frequency flapping modes, and reduces the damping on coupled body-flap motion. Dynamic inflow also couples to the flapping motion to produce complex roots. With body-flap and lag regressing modes as exceptions, the results show essentially similar behavior for most modes of articulated and hingeless rotor helicopters.

Schrage, D. P.↗
NASA NTRS2004

Development and Evaluation of Fault-Tolerant Flight Control Systems

The research is concerned with developing a new approach to enhancing fault tolerance of flight control systems. The original motivation for fault-tolerant control comes from the need for safe operation of control elements (e.g. actuators) in the event of hardware failures in high reliability systems. One such example is modem space vehicle subjected to actuator/sensor impairments. A major task in flight control is to revise the control policy to balance impairment detectability and to achieve sufficient robustness. This involves careful selection of types and parameters of the controllers and the impairment detecting filters used. It also involves a decision, upon the identification of some failures, on whether and how a control reconfiguration should take place in order to maintain a certain system performance level. In this project new flight dynamic model under uncertain flight conditions is considered, in which the effects of both ramp and jump faults are reflected. Stabilization algorithms based on neural network and adaptive method are derived. The control algorithms are shown to be effective in dealing with uncertain dynamics due to external disturbances and unpredictable faults. The overall strategy is easy to set up and the computation involved is much less as compared with other strategies. Computer simulation software is developed. A serious of simulation studies have been conducted with varying flight conditions.

Song, Yong D.↗
NASA NTRS2004

Computation of Sensitivity Derivatives of Navier-Stokes Equations using Complex Variables

Accurate computation of sensitivity derivatives is becoming an important item in Computational Fluid Dynamics (CFD) because of recent emphasis on using nonlinear CFD methods in aerodynamic design, optimization, stability and control related problems. Several techniques are available to compute gradients or sensitivity derivatives of desired flow quantities or cost functions with respect to selected independent (design) variables. Perhaps the most common and oldest method is to use straightforward finite-differences for the evaluation of sensitivity derivatives. Although very simple, this method is prone to errors associated with choice of step sizes and can be cumbersome for geometric variables. The cost per design variable for computing sensitivity derivatives with central differencing is at least equal to the cost of three full analyses, but is usually much larger in practice due to difficulty in choosing step sizes. Another approach gaining popularity is the use of Automatic Differentiation software (such as ADIFOR) to process the source code, which in turn can be used to evaluate the sensitivity derivatives of preselected functions with respect to chosen design variables. In principle, this approach is also very straightforward and quite promising. The main drawback is the large memory requirement because memory use increases linearly with the number of design variables. ADIFOR software can also be cumber-some for large CFD codes and has not yet reached a full maturity level for production codes, especially in parallel computing environments.

Vatsa, Veer N.↗
NASA NTRS1980

Non-Synchronous Whirling Due to Fluid-Dynamic Forces in Axial Turbo-Machinery Rotors

The role of fluid forces acting on the blades of an axial turborotor with regards to whirling was analyzed. The dynamic equations were formulated for the coning mode of an overhung rotor. The exciting forces due to the motion were defined through a set of rotor stability derivatives, and analytical expressions of the aerodynamic contributions were found for the case of small mean stream deflection, high solidity and equivalent flat plate cascade. For a typical case, only backward whirl was indicated when the phase shifting of the rotor wake effect was ignored. A parametric study of the dynamic stability boundary reveals that a reduction in blade stagger angle, mass flow rate, fluid density and an increase in stiffness and external damping are all inductive for improved stability.

Shen, S. F.↗
NASA NTRS1976

A unique formulation of elastic airplane longitudinal equations of motion

Control-configured vehicle technology has increased the demand for detailed analysis of dynamic stability and control, handling and ride qualities, and control system dynamics at early stages of preliminary design. An approximate, but reasonably accurate, set of equations of motion are needed for these early analyses. Such a formulation is developed for the longitudinal dynamics of elastic airplanes. It makes use of only rigid-body aerodynamic stability derivatives in formulating the forces and moments due to elastic motion. Verification of accuracy using data for the B-1 airplane shows very good agreement. Frequencies and damping ratios of the coupled modes corresponding to complex roots of the characteristic equations agree closely with four symmetric elastic modes included.

Swaim, R. L.↗
NASA NTRS1977

A unique formulation of elastic airplane longitudinal equations of motion

Control-configured vehicle technology has increased the demand for detailed analysis of dynamic stability and control, handling and ride qualities, and control system dynamics at early stages of preliminary design. An approximate but reasonably accurate set of equations of motion are needed for these early analyses. Such a formulation is developed for the longitudinal dynamics of elastic airplanes. It makes use of only rigid-body aerodynamic stability derivatives in formulating the forces and moments due to elastic motion. Verification of accuracy using data for the B-1 airplane shows very good agreement. Frequencies and damping ratios of the coupled modes corresponding to complex roots of the characteristic equations agree closely with four symmetric elastic modes included.

Swaim, R. L.↗
NASA NTRSDate not supplied

Attitude Reconstruction of Free-Flight CFD Generated Trajectories Using Non-Linear Pitch Damping Coefficient Curves

Attitude history reconstruction of Free-flight CFD generated trajectories with non-linear pitch damping coefficient curves is investigated. Free-flight CFD simulations of the capsule shape used for the Genesis sample return mission and the upcoming Dragonfly mission to Titan are conducted for 1-, 2-, and 3-degree-of-freedom cases. Two different data reduction methodologies are employed to derive a pitch damping curve as a function of instantaneous angle of attack. These curves are then used to reconstruct the attitude history of the body which is compared to the raw simulation results. While both data reduction methods produce pitch damping curves that can generally reconstruct the motion seen in the Free-flight simulations, it is found that optimization of the pitch damping curve using an inverse estimation process yields superior and more generalizable results. Further refinement of this technique could allow pitch damping curves derived using CFD to serve as a capability complementary to existing techniques for dynamic stability characterization.

entry↗
NASA NTRSDate not supplied

Attitude Reconstruction of Free-Flight CFD Generated Trajectories Using Non-Linear Pitch Damping Coefficient Curves

Attitude history reconstruction of Free-flight CFD generated trajectories with non-linear pitch damping coefficient curves is investigated. Free-flight CFD simulations of the capsule shape used for the Genesis sample return mission and the upcoming Dragonfly mission to Titan are conducted for 1-, 2-, and 3-degree-of-freedom cases. Two different data reduction methodologies are employed to derive a pitch damping curve as a function of instantaneous angle of attack. These curves are then used to reconstruct the attitude history of the body which is compared to the raw simulation results. While both data reduction methods produce pitch damping curves that can generally reconstruct the motion seen in the Free-flight simulations, it is found that optimization of the pitch damping curve using an inverse estimation process yields superior and more generalizable results. Further refinement of this technique could allow pitch damping curves derived using CFD to serve as a capability complementary to existing techniques for dynamic stability characterization.

entry↗
NASA NTRSDate not supplied

Simulated Trajectory Reconstruction of the Genesis Aeroballistic Testing for Dragonfly

Dragonfly is a NASA New Frontiers Program mission, led by Johns Hopkins Applied Physics Laboratory (APL), that will deliver a rotorcraft lander to Saturn’s moon, Titan, which uses a Genesis derived entry vehicle shape. During the Genesis mission, there were concerns with the dynamic stability of the configuration leading to testing at the Aeroballistic Research Facility at Eglin Air Force Base and Dragonfly shares these concerns given the similarity of the entry vehicle shapes. The focus of this paper is to compare the dynamics observed in the ballistic range shots from 1999 against the dynamics from simulation using the Program to Optimize Trajectories II (POST2). This analysis provides a confirmation that the aerodynamics developed during the Genesis mission, especially from ballistic range shots, is being used properly in the Dragonfly mission entry aerodynamics database.

Dragonfly↗