Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROMAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Core mass at the helium flash from observations and a new bound on neutrino electromagnetic properties

Existing measurements of the bolometric magnitudes of the brightest red giants in 26 globular clusters are used to determine the brightness difference between the tip of the red giant branch (on average found to be 0.1 mag brighter than the brightest red giant) and RR Lyrae stars. The metallicity variation of the result agrees perfectly with theoretical predictions. In conjunction with previous determinations of the number ratio of horizontal-branch versus red giant stars, with statistical parallax determinations of RR Lyrae absolute luminosities, and with theoretical predictions based on the Sweigart and Gross evolutionary sequences, this result yields an allowed range for a hypothetical core mass variation relative to the standard results of (0.009 + or - 0.012) solar mass. If neutrinos had anomalous electromagnetic dipole moments, the increased energy loss near the helium flash would lead to an increased core mass. Constraints on neutrino electromagnetic properties are determined from the color-magnitude diagrams of the globular clusters.

Raffelt, Georg G.↗

Characteristics of electromagnetic interference generated during discharge of Mylar samples

This paper discusses the measurements of the electromagnetic interference (EMI) generated during discharges of Mylar samples. The two components of EMI, the conducted emission and the radiated emission, are characterized by the replacement current and the radiated RF spectrum respectively. The measured radiated RF spectra reveal important information on the source of the electromagnetic radiation. The possible sources are the replacement current pulse and the discharged generated plasma. The scaling of the amplitudes of the EMI, as a function of the area of the test sample, is also discussed.

Leung, P. L.↗

Pulsed electromagnetic acceleration

Direct measurements of the power deposited in the anode of a multimegawatt MPD accelerator using thermocouples attached to a thin shell anode reveal a dramatic decrease in the fractional anode power from 50% at 200 KW input power to less than 10% at 20 MW power. The corresponding local power flux peak at a value of 10,000 W/sq cm at the lip of the anode exhaust orifice, a distribution traced to a corresponding peak in the local current density at the anode. A comparison of voltage-current characteristics and spectral photographs of the MPD discharge using quartz, boron nitride and plexiglas insulators with various mass injection configurations led to the identification of different voltage modes and regions of ablation free operation. The technique of piezoelectric impact pressure measurement in the MPD exhaust flow was refined to account for the effects due to probe yaw angle.

Jahn, R. G.↗

An experiment to measure the one-way velocity of propagation of electromagnetic radiation

An experiment involving commercially available instrumentation to measure the velocity of the earth with respect to absolute space is described. The experiment involves the measurement of the one-way propagation velocity of electromagnetic radiation down a high-quality coaxial cable. It is demonstrated that the experiment is both physically meaningful and exceedingly simple in concept and in implementation. It is shown that with currently available commercial equipment one might expect to detect a threshold value for the component of velocity of the earth's motion with respect to absolute space in the equatorial plane of approximately 10 km/s, which greatly exceeds the velocity resolution required to detect the motion of the solar system with respect to the center of the galaxy.

Kolen, P.↗

An Analysis of the Lightning Jump Algorithm Using Geostationary Lightning Mapper Flashes

Lightning's relation to severe weather has been studied since the 1980's. The invention of the Lightning Mapping Array allowed for total lightning measurements in a 125 km operational range. This brought forth an automated lightning Jump Algorithm (LIA) that predicted severe weather based on two-sigma increases in total lightning. The LIA's biggest downfall is being restrained to the limited field of view (FOV) of LMA's. The launch of the Geostationary Lightning Mapper (GLM) aboard the GOES-16 satellite now gives us hemispheric total lightning measurements. The wide FOV makes the GLM a good candidate to apply the LIA to. However the GLM and LMA have some differences. One being the coarser spatial resolution of GLM. Another being that LMA measures very high frequency (VHF) electromagnetic radiation while GLM measures optical radiation. These differences suggest an extensive study must be done on using the LIA with GLM to understand potential differences in the LIA and to maximize its operational skill. Four deep dive cases are conducted showcasing the differences between the GLM and LMA and their jumps.

Curtis, Nathan↗

The need to measure man-made radiation from orbit for spectrum management

Measurements of RF radiation from orbiting spacecraft are discussed as an approach to improving man-made radio-wave spectrum management for avoidance and prediction of harmful RF interferences. It is pointed out that a measurement program is required for acquisition of data on electromagnetic fields to be expected in orbits, and that several types of satellites could provide platforms for such missions. Papers by Reich et al. (1972) and Kelleher et al. (1972) are referred to for descriptions as to how such platforms could be used. An electromagnetic field spectrum measurement program is outlined for orbital missions.

Eckerman, J.↗

The determination of the constitutive parameters of a medium with application to a reinforced concrete pad

This report describes the experimental and analytical efforts performed to determine the constitutive parameters of a reinforced concrete pad on which an aircraft (the NASA Boeing 757) was parked while its internal electromagnetic environment was measured. This concrete pad is part of the Large Electromagnetic System-Level Illuminator (LESLI) test facility at the Phillips Laboratory, Kirtland Air Force Base, New Mexico. The relative dielectric constant, conductivity, index of refraction, and reflection coefficient have been determined over the frequency range of 0 to 300 MHz and are presented.

Poggio, A. J.↗

Current driven instabilities of an electromagnetically accelerated plasma

Quantitative measurements of the plasma instability that strongly affects the efficiency and lifetime of electromagnetic plasma accelerators were obtained. Experimental results are presented for the dispersion relations (wave phase velocities), spatial growth rates, and stability boundaries of accelerators. The measured critical wave parameters are found to agree well with theoretical predictions. A kinetic theoretical model was used to study current driven instabilities which are intrinsic to the high-current-carrying magnetized plasma of a magnetoplasmadynamic accelerator. Under certain conditions, marginally stable waves travelling almost perpendicular to the magnetic field are found which travel at a velocity equal to that of the electron current.

Kelly, A. J.↗

Electromagnetic Forces in a Hybrid Magnetic-Bearing Switched-Reluctance Motor

Analysis and experimental measurement of the electromagnetic force loads on the hybrid rotor in a novel hybrid magnetic-bearing switched-reluctance motor (MBSRM) have been performed. A MBSRM has the combined characteristics of a switched-reluctance motor and a magnetic bearing. The MBSRM discussed in this report has an eight-pole stator and a six-pole hybrid rotor, which is composed of circular and scalloped lamination segments. The hybrid rotor is levitated using only one set of four stator poles, while a second set of four stator poles imparts torque to the scalloped portion of the rotor, which is driven in a traditional switched reluctance manner by a processor. Static torque and radial force analysis were done for rotor poles that were oriented to achieve maximum and minimum radial force loads on the rotor. The objective is to assess whether simple one-dimensional magnetic circuit analysis is sufficient for preliminary evaluation of this machine, which may exhibit strong three-dimensional electromagnetic field behavior. Two magnetic circuit geometries, approximating the complex topology of the magnetic fields in and around the hybrid rotor, were employed in formulating the electromagnetic radial force equations. Reasonable agreement between the experimental and the theoretical radial force loads predictions was obtained with typical magnetic bearing derating factors applied to the predictions.

Morrison, Carlos R.↗

Space shuttle lightning protection criteria document

The lightning environment for design is defined and imposes the requirements that the design must satisfy to insure the protection of the space shuttle vehicle system from the direct and indirect effects of lightning. Specifications, criteria, and guidelines provide a practical and logical approach to the protection problems. Protection against the indirect effects of lightning is intimately involved with the electromagnetic compatibility and electromagnetic interference functions. While this document does not deal specifically with electromagnetic compatibility and electromagnetic interference, it does deal with the interactions between lightning protection measures and measures employed for electromagnetic compatibility and control of electromagnetic interference.

Source record↗

The measurement of heats of solution of high melting metallic systems in an electromagnetic levitation field

A method was tested for measuring the enthalpies of mixing of liquid metallic alloying systems, involving the combination of two samples in the electromagnetic field of an induction coil. The heat of solution is calculated from the pyrometrically measured temperature effect, the heat capacity of the alloy, and the heat content of the added sample. The usefulness of the method was tested experimentally with iron-copper and niobium-silicon systems. This method should be especially applicable to high-melting alloys, for which conventional measurements have failed.

Frohberg, M. G.↗

STS-3/OSS-1 Plasma Diagnostics Package (PDP) measurements of Orbiter transmitter and subsystem electromagnetic interference

The plasma diagnostics package receiver system is described to identify the various antennas and to characterize the complement of receivers which cover the frequency range of 30 Hz to 800 Hz and S-band at 2200 + or - 300 MHz. Sample results are presented to show the variability of electromagnetic effects associated with the orbiter and the time variability of these effects. The electric field and magnetic field maximum and minimum field strength spectra observed during the mission at the pallet location are plotted. Values are also derived for the maximum UHF transmitter and S-band transmitter field strengths. Calibration data to convert from the survey plots to actual narrowband and broadband field strengths are listed.

Shawhan, S. D.↗

Synergic inversion technique for active and passive microwave remote sensing of the ocean

A unified approach for combining active and passive microwave measurements for remote sensing applications is described. A synergic inversion technique has been developed and applied to the retrieval of geophysical parameters of the ocean surface and of the atmosphere. It is based on the combination of radiometric and radar measurements at the electromagnetic and cell level and not only on the correction of radar measurements by radiometric measurements, or conversely. Such a combination is performed through a common quantity: the bistatic scattering coefficient of the observed surface. This is used in a direct model to simulate combined measurements from active and passive sensors. It requires a rather complete and accurate calculation of the scattering of microwaves by the rough sea surface. Comparisons with experimental models derived for scatterometers and radar altimeters or with data derived from radiometric measurements show that the results of this unified approach are consistent with those from separate microwave sensors, at least for a foam-free sea surface.

Sobieski, Piotr↗

Electromagnetic bias in sea surface range measurements at frequencies of the TOPEX/POSEIDON satellite

Measurements of EM bias at the 13.6 GHz and 5.3 GHz operating frequencies of the NASA altimeter on the TOPEX/POSEIDON satellite in a series of 11 aircraft flights from January 17, 1991 through March 4, 1991, during the Surface Wave Dynamics Experiment, are reported. The data are consistent with an earlier set of airborne measurements and indicate that EM bias is slightly higher at 5.3 GHz than at 13.6 GHz, and that the magnitudes of both biases increase with increasing wind speed, as does their difference. With some exceptions, EM bias shows little variation over a mesoscale region on a given day or within 1 or 2 h, but it can change significantly over a 6-h period. Recent tower, airborne, and satellite measurements exhibit a consistency in the characteristics of the wind speed dependence but suggest that there may be a height dependence in the determinations, with the bias decreasing with increasing altitude.

Hevizi, Laszlo G.↗

Electromagnetic probe technique for fluid flow measurements

The probes described herein, in various configurations, permit the measurement of the volume fraction of two or more fluids flowing through a pipe. Each probe measures the instantaneous relative dielectric constant of the fluid in immediate proximity. As long as separation of the relative dielectric constant of the fluid is possible, several or even many fluids can be measured in the same flow stream. By using multiple probes, the velocity of each fluid can generally be determined as well as the distribution of each constituent in the pipe. The values are determined by statistical computation. There are many potential applications for probes of this type in industry and government. Possible NASA applications include measurements of helium/hydrazine flow during rocket tests at White Sands, liquid/gas flow in hydrogen or oxygen lines in Orbiter engines, and liquid/gaseous Freon flow in zero gravity tests with the KS135 aircraft at JSC. Much interest has been shown recently by the oil industry. In this a good method is needed to measure the fractions of oil, water, and natural gas flowing in a pipeline and the velocity of each. This particular problem involves an extension of what has been developed to date and our plans to solve this problem will be discussed herein.

Arndt, G. D.↗

Electromagnetic Probe Technique for Fluid Flow Measurements

The probes described herein, in various configurations, permit the measurement of the volume fraction of two or more fluids flowing through a pipe. Each probe measures the instantaneous relative dielectric constant of the fluid in immediate proximity. As long as separation of the relative dielectric constants of each fluid is possible, several or even many fluids can be measured in the same flow steam. By using multiple probes, the velocity of each fluid can generally be determined as well as the distribution of each constituent in the pipe. The values are determined by statistical computation. There are many potential applications for probes of this type in industry and government. Possible NASA applications include measurements of helium/hydrazine flow during rocket tests at White Sands, liquid/gas flow in hydrogen or oxygen lines in Orbiter engines, and liquid/gaseous Freon flow in zero gravity tests with the KS135 aircraft at JSC. Much interest has been shown recently by the oil industry. In this industry, a good method is needed to measure the fractions of oil, water, and natural gas flowing in a pipeline and the velocity of each. This particular problem involves an extension of what has been developed to date and our plans and program to solve this problem will be discussed herein.

Arndt, G. D.↗

Electromagnetic Interference/Compatibility (EMI/EMC) Control Test and Measurement Facility: User Test Planning Guide

Test process, milestones and inputs are unknowns to first-time users of the EMI/EMC Test Facility. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Scully, Robert C.↗