Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROMECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Electrostatic generator/motor electrodes located on the inner surface of an electromechanical battery rotor

A geometric design of E-S generator/motor electrodes mounted on the inner surface of a fiber-composite rotor is provided. The electrode configuration is able to sustain very high g levels. The rotor may be formed of carbon-fiber wound on top of an inner E or S-glass fiber composite core. The electrode design provides the needed area to satisfy the power requirements of the storage system and utilizes a stacked wedge-like electrode array that both solves the high-g problem and results in a doubling or tripling of the electrode area, relative to that of electrodes that conform to the inner cylindrical surface of the rotor.

42 ENGINEERING↗

Electrostatic generator/motor electrodes located on the inner surface of an electromechanical battery rotor

A geometric design of E-S generator motor electrodes mounted on the inner surface of a fiber-composite rotor is provided. The electrode configuration is able to sustain very high g levels. The rotor may be funned of carbon-fiber wound on top of an inner E car S-glass fiber composite core. The electrode design provides the needed area to satisfy the power requirements of the storage system and utilizes a stacked wedge-like electrode array that both solves the high-g problem and results in a doubling or tripling of the electrode area, relative to that of electrodes that conform to the inner cylindrical surface of the rotor.

25 ENERGY STORAGE↗

A Robust Yule-Walker Method for Online Monitoring of Power System Electromechanical Modes of Oscillation

Reliable power system operation requires that system operators maintain a satisfactory small-signal stability margin at all times. Mode meters allow system operators to continuously monitor the stability margin by analyzing synchrophasor measurements. Experience with mode meters at the Bonneville Power Administration (BPA) has revealed that mode meters sometimes suffer severe bias following transient disturbances. In this paper, a robust version of the Yule-Walker mode meter algorithm is proposed to mitigate this bias. The robust capability is introduced by modifying the estimator of the autocovariance sequence (ACS) on which the algorithm depends. Tests with field-measured data demonstrate that the robust Yule-Walker (RYW) algorithm significantly outperforms its conventional counterpart and is better able to provide system operators with accurate information about the system's stability margin.

Follum, James D.↗

Experience in remote-operated decommissioning with electromechanical equipment - 15354

For the Reprocessing Plant (WAK) in Karlsruhe, Germany, Waelischmiller developed remote handling technologies and robotics used for dismantling of several high-activity radioactive storage buildings. The key component in this project is the Waelischmiller system TELBOT{sup R}. The TELBOT{sup R} system has been successfully deployed in dozens of applications based on the customer's requirements and lessons learned. The objectives for this project were to deliver a reliable, high payload manipulator that is deployed on an excavator. The TELBOT{sup R} is a seven degree of freedom manipulator, with a 2.7 meter reach and a payload capacity of 100 kg at full reach. It is modular with selectable drives, arm lengths and joint modules. The motors and gears are located in a base behind the arm. Movements are effected by concentric tubes inside the arm links and concentric bevel gears inside the joints. Consequently, there is no wiring either inside or outside the arm and all axes can rotate freely. High-quality materials such as radiation-, acid- and corrosion-resistant materials and a final surface protective treatment are used in the manufacture of the TELBOT{sup R}. This paper will describe the TELBOT{sup R} system used by the German decommissioning program at Karlsruhe. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Carbon fiber-nanoparticle composites with electromechanical properties

A carbon fiber composite material comprising: (i) a carbon fiber having an outer surface, a thickness of at least 1 micron, and an aspect ratio of at least 1000; (ii) a sizing agent coated on the outer surface of the carbon fiber, wherein the sizing agent has a thickness of up to 200 nm; and (iii) nanoparticles having a size in at least one dimension of up to 100 nm embedded within the sizing agent, wherein the nanoparticles have a metal carbide, metal oxide, metal nitride, and/or metal boride composition. A method for producing the fiber composite material comprises: (a) continuously feeding and coating a continuous carbon fiber with a liquid containing a solvent, sizing agent, and nanoparticles in a continuous feed-through process to result in said sizing agent and nanoparticles coating the surface of the continuous carbon fiber; and (b) removing the solvent from the coated fiber.

Bowland, Christopher C.↗

Decoupling Mesoscale Functional Response in PLZT across the Ferroelectric–Relaxor Phase Transition with Contact Kelvin Probe Force Microscopy and Machine Learning

Relaxor ferroelectrics exhibit a range of interesting material behavior, including high electromechanical response, polarization rotations, as well as temperature and electric field-driven phase transitions. The origin of this unusual functional behavior remains elusive due to limited knowledge on polarization dynamics at the nanoscale. Piezoresponse force microscopy and associated switching spectroscopy provide access to local electromechanical properties on the micro- and nanoscale, which can help to address some of these gaps in our knowledge. However, these techniques are inherently prone to artefacts caused by signal contributions emanating from electrostatic interactions between tip and sample. Understanding functional behavior of complex, disordered systems like relaxor materials with unknown electromechanical properties therefore requires a technique that allows distinguishing between electromechanical and electrostatic response. Here, contact Kelvin probe force microscopy (cKPFM) is used to gain insight into the evolution of local electromechanical and capacitive properties of a representative relaxor material lead lanthanum zirconate across the phase transition from a ferroelectric to relaxor state. The obtained multidimensional data set was processed using an unsupervised machine learning algorithm to detect variations in functional response across the probed area and temperature range. Further analysis showed the formation of two separate cKPFM response bands below 50 °C, providing evidence for polarization switching. At higher temperatures only one band is observed, indicating an electrostatic origin of the measured response. In addition, the junction potential difference, which was extracted from the cKPFM data, becomes independent of the temperature in the relaxor state. As a result, the combination of this multidimensional voltage spectroscopy technique and machine learning allows to identify the origin of the measured functional response and to decouple ferroelectric from electrostatic phenomena necessary to understand the functional behavior of complex, disordered systems like relaxor materials.

36 MATERIALS SCIENCE↗

Multiscale modeling-enabled design of multifunctional composites

This study aims to create a comprehensive model that considers multiple scales and physics for predicting the electromechanical behavior of fiber-reinforced composites enhanced with barium titanate (BaTiO3). In our earlier work, we have demonstrated that depositing BaTiO3 microparticles of 200-nm-diameter, on fiber surfaces during fiber-reinforced composite fabrication enhances mechanical strength, passive self-sensing, and energy harvesting properties. The key is to carefully control the microparticle concentration to prevent agglomeration. Since the particles are micron-sized, understanding how agglomeration affects the composites' electromechanical properties is crucial for guiding such multifunctional materials’ design. This study introduces a micromechanics-based approach to explore the impact of microparticle dispersion on the bulk composites' electromechanical properties. Insights gained from this investigation are applied in experiments, enabling accurate predictions of mechanical and self-sensing responses in BaTiO3-enhanced fiber-reinforced composites. Micro-level findings from this computational approach can be integrated into larger continuum models to comprehensively capture the electromechanical behavior of the composite structures at bulk scale. The proposed model is validated by comparing predictions with experimental results, accounting for the nonlinear mechanical and electromechanical behaviors of constituent materials. Consequently, this computational model serves as a digital platform for efficiently designing multifunctional composites.

Gupta, Sumit↗

Specific resonance mode enhancement and suppression using non-uniform polarization of piezoelectric wafers: Theory and experiments

In this work, we present experimental demonstration of specific resonance mode enhancement and suppression in circular and rectangular piezoelectric wafers with engineered non-uniform polarization profiles. The polarization profiles are designed based on the electromechanical impedance response of non-uniformly polarized wafers as obtained from the theory. The circular wafers are fabricated with non-uniform polarization profiles that involve a central polarized region surrounded by an unpolarized region. The radius of the polarization zone is designed based on the condition for specific mode enhancement obtained from the electromechanical impedance response of non-uniformly polarized wafers. We actually show how the condition can not only be used to enhance but also to suppress electromechanical resonances. Two kinds of wafers are designed and fabricated to specifically suppress second and third radial modes respectively. Similarly, rectangular wafers are designed with two different kinds of non-uniform polarization profiles — the first of which enhances the second in-plane extensional mode in the impedance spectrum and the second polarization profile suppresses all the electromechanical resonances pertaining to the in-plane extensional modes and selectively excites only the in-plane bending modes. The proposed approach of using non-uniformly polarized wafers finds application in designing multi-frequency sensors/transducers, frequency-tuned receivers, acoustic beamforming, and other non-traditional applications such as information storage.

36 MATERIALS SCIENCE↗

Computational evaluation of the flexoelectric effect in dielectric solids

Flexoelectricity is a size-dependent electromechanical mechanism coupling polarization and strain gradient. It exists in a wide variety of materials, and is most noticeable for nanoscale objects, where strain gradients are higher. Simulations are important to understand flexoelectricity because experiments at very small scales are difficult, and analytical solutions are scarce. Here, we computationally evaluate the role of flexoelectricity in the electromechanical response of linear dielectric solids in two-dimensions. We deal with the higher-order coupled partial differential equations using smooth meshfree basis functions in a Galerkin method, which allows us to consider general geometries and boundary conditions. We focus on the most common setups to quantify the flexoelectric response, namely, bending of cantilever beams and compression of truncated pyramids, which are generally interpreted through approximate solutions. While these approximations capture the size-dependent flexoelectric electromechanical coupling, we show that they only provide order-of-magnitude estimates as compared with a solution fully accounting for the multidimensional nature of the problem. We discuss the flexoelectric mechanism behind the enhanced size-dependent elasticity in beam configurations. We show that this mechanism is also responsible for the actuation of beams under purely electrical loading, supporting the idea that a mechanical flexoelectric sensor also behaves as an actuator. The predicted actuation-induced curvature is in a good agreement with experimental results. The truncated pyramid configuration highlights the critical role of geometry and boundary conditions on the effective electromechanical response. Our results suggest that computer simulations can help understanding and quantifying the physical properties of flexoelectric devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intermittent contact mode piezoresponse force microscopy in a liquid environment

Probing electromechanical coupling in biological systems and electroactive molecules requires high resolution functional imaging. Here, we investigate the feasibility of intermittent contact mode piezoresponse force microscopy based on simultaneous mechanical and electrical probe modulation. It is shown that imaging at frequencies corresponding to the first contact resonance in liquid allows contrast consistent with the electromechanical signal to be obtained for model ferroelectric systems and piezoelectric tooth dentin

Rodriguez, Brian↗

Advanced Techniques for Power System Identification from Measured Data

Time-synchronized measurements provide rich information for estimating a power-system's electromechanical modal properties via advanced signal processing. This information is becoming critical for the improved operational reliability of interconnected grids. A given mode's properties are described by its frequency, damping, and shape. Modal frequencies and damping are useful indicators of power-system stress, usually declining with increased load or reduced grid capacity. Mode shape provides critical information for operational control actions. This project investigated many advanced techniques for power system identification from measured data focusing on mode frequency and damping ratio estimation. Investigators from the three universities coordinated their effort with Pacific Northwest National Laboratory (PNNL). Significant progress was made on developing appropriate techniques for system identification with confidence intervals and testing those techniques on field measured data and through simulation. Experimental data from the western area power system was provided by PNNL and Bonneville Power Administration (BPA) for both ambient conditions and for signal injection tests. Three large-scale tests were conducted for the western area in 2005 and 2006. Measured field PMU (Phasor Measurement Unit) data was provided to the three universities. A 19-machine simulation model was enhanced for testing the system identification algorithms. Extensive simulations were run with this model to test the performance of the algorithms. University of Wyoming researchers participated in four primary activities: (1) Block and adaptive processing techniques for mode estimation from ambient signals and probing signals, (2) confidence interval estimation, (3) probing signal design and injection method analysis, and (4) performance assessment and validation from simulated and field measured data. Subspace based methods have been use to improve previous results from block processing techniques. Bootstrap techniques have been developed to estimate confidence intervals for the electromechanical modes from field measured data. Results were obtained using injected signal data provided by BPA. A new probing signal was designed that puts more strength into the signal for a given maximum peak to peak swing. Further simulations were conducted on a model based on measured data and with the modifications of the 19-machine simulation model. Montana Tech researchers participated in two primary activities: (1) continued development of the 19-machine simulation test system to include a DC line; and (2) extensive simulation analysis of the various system identification algorithms and bootstrap techniques using the 19 machine model. Researchers at the University of Alaska-Fairbanks focused on the development and testing of adaptive filter algorithms for mode estimation using data generated from simulation models and on data provided in collaboration with BPA and PNNL. There efforts consist of pre-processing field data, testing and refining adaptive filter techniques (specifically the Least Mean Squares (LMS), the Adaptive Step-size LMS (ASLMS), and Error Tracking (ET) algorithms). They also improved convergence of the adaptive algorithms by using an initial estimate from block processing AR method to initialize the weight vector for LMS. Extensive testing was performed on simulated data from the 19 machine model. This project was also extensively involved in the WECC (Western Electricity Coordinating Council) system wide tests carried out in 2005 and 2006. These tests involved injecting known probing signals into the western power grid. One of the primary goals of these tests was the reliable estimation of electromechanical mode properties from measured PMU data. Applied to the system were three types of probing inputs: (1) activation of the Chief Joseph Dynamic Brake, (2) mid-level probing at the Pacific DC Intertie (PDCI), and (3) low-level probing on the PDCI. The Chief Joseph Dynamic Brake is a 1400 MW disturbance to the system and is injected for a half of a second. For the mid and low-level probing, the Celilo terminal of the PDCI is modulated with a known probing signal. Similar but less extensive tests were conducted in June of 2000. The low-level probing signals were designed at the University of Wyoming. A number of important design factors are considered. The designed low-level probing signal used in the tests is a multi-sine signal. Its frequency content is focused in the range of the inter-area electromechanical modes. The most frequently used of these low-level multi-sine signals had a period of over two minutes, a root-mean-square (rms) value of 14 MW, and a peak magnitude of 20 MW. Up to 15 cycles of this probing signal were injected into the system resulting in a processing gain of 15. The resulting measured response at points throughout the system was not much larger than the ambient noise present in the measurements.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Modeling the Control Systems of Gas-Turbines to Ensure Their Reliable Parallel Operation in the UPS of Russia

Consideration is given to different approaches to modeling the control systems of gas turbines as a component of CCPP and GTPP to ensure their reliable parallel operation in the UPS of Russia. The disadvantages of the approaches to the modeling of combined-cycle units in studying long-term electromechanical transients accompanied by power imbalance are pointed out. Examples are presented to support the use of more detailed models of gas turbines in electromechanical transient calculations. It is shown that the modern speed control systems of gas turbines in combination with relatively low equivalent inertia have a considerable effect on electromechanical transients, including those caused by disturbances not related to power imbalance.

42 ENGINEERING↗

A study approach on ferroelectric domains in BaTiO{sub 3}

Atomic Force Acoustic Microscopy (AFAM) and Piezoresponse Force Microscopy (PFM) were used to study local elastic and electromechanical response in BaTiO{sub 3} ceramics. A commercial multi-mode Scanning Probe Microscopy (SPM) and AFAM mode to image contact stiffness were employed to accomplish the aforementioned purposes. Stiffness parameters along with Young's moduli and piezo coefficients were quantitatively determined. PFM studies were based on electrostatic and electromechanical response from localized tip-surface contact. Comparison was made regarding the Young's moduli obtained by AFAM and PFM. In addition, phase and amplitude images were analyzed based on poling behavior, obtained via the application of − 10 V to + 10 V local voltage. - Highlights: •Nanoscale behavior of piezo domains in BaTiO{sub 3} ferroelectric materials •Use of Atomic Force Acoustic Microscopy (AFAM) and Piezo Force Microscopy (PFM) •Local elastic and electromechanical response in BaTiO{sub 3} ceramics •The young's moduli obtained from AFAM and PFM.

36 MATERIALS SCIENCE↗

Ferroelectric, dielectric and piezoelectric properties of Sr{sub 0.6}(BiNa){sub 0.2}Bi{sub 2}Nb{sub 2}O{sub 9} ceramics

Graphical abstract: The oxygen vacancy was confirmed by the left figure and the role of oxygen vacancy on the piezoelectric properties was discussed. - Highlights: • The d{sub 33}, ρ and T{sub c} were found to be 22 pC/N, ρ ∼ 10{sup 6} Ω cm and 586 °C. • The electromechanical properties: k{sub p} ∼ 5.0%, k{sub t} ∼ 8.7% and Q{sub m} ∼ 651. • The oxygen vacancy is responsible for electrical properties at high temperature. - Abstract: Aurivillius-type ceramic, Sr{sub 0.6}(BiNa){sub 0.2}Bi{sub 2}Nb{sub 2}O{sub 9} (SBNBN), was synthesized by using conventional solid-state processing. Phase structure and microstructural morphology were confirmed by X-ray diffraction analyses (XRD) and the scanning electron microscopy (SEM). Dielectric, piezoelectric and electromechanical properties of the SBNBN ceramic were investigated in detail. Curie temperature (T{sub c}), piezoelectric coefficient (d{sub 33}), electromechanical coupling coefficient k{sub p}, k{sub t} and quality factor Q{sub m} of the SBNBN ceramic were found to be 586.5 °C, 22 pC/N, 5.0%, 8.7% and 651, respectively. In addition, the reasons for varieties of the resistivity and dielectric properties at high temperature were also discussed.

36 MATERIALS SCIENCE↗

Nanoscale Polarization-Dependent Young’s Modulus of Ferroelectric BaTiO 3 Single Crystals

Flexoelectric fields produced by strong strain gradients at the nanoscale couple to ferroelectric polarization, promoting changes in the mechanical properties of ferroelectric materials as a function of the direction of the ferroelectric polarization. In this work, we calculate the asymmetry in the Young’s modulus found in oppositely polarized out-of-plane domains of BaTiO 3 single crystals by means of contact resonance AFM, and we evaluate its impact on the electromechanical response as measured by piezoresponse force microscopy, both using band excitation modes. Furthermore, we analyze the electromechanical response of the different BaTiO 3 domains using k-means to build up their mean elastic and electromechanical features and quantify the flexoelectrically induced modulation of the Young’s modulus. Finally, we discuss the use of contact Kelvin probe force microscope measurements to decouple electrostatic artifacts from purely piezoelectric ones when flexoelectric coupling appears.

BaTiO 3 single crystals↗

Origin of giant electric-field-induced strain in faulted alkali niobate films

A large electromechanical response in ferroelectrics is highly desirable for developing high-performance sensors and actuators. Enhanced electromechanical coupling in ferroelectrics is usually obtained at morphotropic phase boundaries requiring stoichiometric control of complex compositions. Recently it was shown that giant piezoelectricity can be obtained in films with nanopillar structures. Here, we elucidate its origin in terms of atomic structure and demonstrate a different system with a greatly enhanced response. This is in non-stoichiometric potassium sodium niobate epitaxial thin films with a high density of self-assembled planar faults. A giant piezoelectric coefficient of ~1900 picometer per volt is demonstrated at 1 kHz, which is almost double the highest ever reported effective piezoelectric response in any existing thin films. The large oxygen octahedral distortions and the coupling between the structural distortion and polarization orientation mediated by charge redistribution at the planar faults enable the giant electric-field-induced strain. Our findings demonstrate an important mechanism for realizing the unprecedentedly giant electromechanical coupling and can be extended to many other material functions by engineering lattice faults in non-stoichiometric compositions.

36 MATERIALS SCIENCE↗

Repurposing Inactive Oil and Gas Wells for Energy Storage: Maximizing the Potential Via Optimal Drivetrain Control: Preprint

In recent years, there has been a growing emphasis on utilizing energy storage to enhance grid resilience against disruptive events. While renewable energy supply continues to expand, gravity-based solutions like pumped hydro remain dominant in the commercial space. However, their geographical limitations constrain availability, scalability, and increase costs for co-locating solar and wind energy. An alternative approach proposes repurposing idle oil and gas wells located closer to existing grid infrastructure, offering a promising and cost-effective solution. This paper addresses the optimization and control of a regenerative drive system coupled to an interior permanent magnet synchronous machine in a 300-meter well with a 100-Newton weight. The study employs a dynamic MATLAB/Simulink model to simulate the operation of the electric drivetrain system during storage and discharge operations. The results demonstrate an initial round-trip efficiency of 85.9% for the electrical system alone and identify crucial factors for maximizing efficiency. The optimized operation and control of the electromechanical drivetrain system hold great potential for minimizing the levelized cost of storage while maximizing efficiency and revenue generation.

ENERGY STORAGE,ENGINEERING↗