SEARCH · Search NASA

Results for “ELECTROSTATIC CHARGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Abrasion by aeolian particles: Earth and Mars

Estimation of the rate of aeolian abrasion of rocks on Mars requires knowledge of: (1) particle flux, (2) susceptibilities to abrasion of various rocks, and (3) wind frequencies on Mars. Fluxes and susceptibilities for a wide range of conditions were obtained in the laboratory and combined with wind data from the Viking meteorology experiment. Assuming an abundant supply of sand-sized particles, estimated rates range up to 2.1 x 10 to the minus 2 power cm of abrasion per year in the vicinity of Viking Lander 1. This rate is orders of magnitude too great to be in agreement with the inferred age of the surface based on models of impact crater flux. The discrepancy in the estimated rate of abrasion and the presumed old age of the surface cannot be explained easily by changes in climate or exhumation of ancient surfaces. The primary reason is thought to be related to the agents of abrasion. At least some sand-sized (approx. 100 micrometers) grains appear to be present, as inferred from both lander and orbiter observations. High rates of abrasion occur for all experimental cases involving sands of quartz, basalt, or ash. However, previous studies have shown that sand is quickly comminuted to silt- and clay-sized grains in the martian aeolian regime. Experiments also show that these fine grains are electrostatically charged and bond together as sand-sized aggregates. Laboratory simulations of wind abrasion involving aggregates show that at impact velocities capable of destroying sand, aggregates from a protective veneer on the target surface and can give rise to extremely low abrasion rates.

Greeley, R.↗

NASA NTRS1985

Closed loop electrostatic levitation system

An electrostatic levitation system is described, which can closely control the position of objects of appreciable size. A plurality of electrodes surround the desired position of an electrostatically charged object, the position of the objects is monitored, and the voltages applied to the electrodes are varied to hold the object at a desired position. In one system, the object is suspended above a plate-like electrode which has a concave upper face to urge the object toward the vertical axis of the curved plate. An upper electrode that is also curved can be positioned above the object, to assure curvature of the field at any height above the lower plate. In another system, four spherical electrodes are positioned at the points of a tetrahedron, and the voltages applied to the electrodes are varied in accordance with the object position as detected by two sensors.

Rhim, W. K.↗

NASA NTRS1984

Gravito-electrodynamics and the structure of planetary ring systems

Recent spacecraft observations of the Saturnian and Jovian ring systems have highlighted a plethora of interesting new phenomena associated with those regions containing fine (micron and sub-micron sized) dust. Recognizing that these dust grains, by virtue of being immersed within the planetary magnetospheres, are electrostatically charged to the point that they experience comparable gravitational and electric forces, a new 'gravito-electrodynamic' theory has been developed to describe their dynamics. This theory has been successful in explaining all these phenomena in a systematic way. In this review, the basic model and its range of validity are outlined, and its application to the Saturnian and Jovian ring systems are discussed.

Mendis, D. A.↗

NASA NTRS1985

The physics of comets

This volume of the 'Fundamentals of Cosmic Physics' is concerned with the physics of comets. Aspects regarding the nucleus are discussed, taking into account observations, radius and albedo, mass, rotation, splitting and disruption, the temperature and sublimation of the cometary nucleus, the chemical composition, the electrostatic charging of the cometary nucleus, and the structure and evolution of the cometary nucleus. Other topics explored are related to the atmosphere and its interaction with the solar wind, the plasma tail, and the dust tail. Attention is given to excitation mechanisms, atmospheric abundances and production rates, chemical models of the inner coma, collisional processes and the multifluid approach, radiative transfer, the ionization processes, models of the inner layer, the outer coma, acceleration mechanisms in the plasma tail, the structure of the plasma tail, the cometary magnetosphere, dust grain orbits, gas-dust interaction in the inner coma, and the nature of the cometary dust.

Mendis, D. A.↗

NASA NTRS1985

A Note on Jupiter's Gossamer Ring

The newly discovered gossamer ring of Jupiter, composed largely of micron-sized grains, exhibits a significant peak very near the synchronous radius. It is believed that this peak is associated with an unobserved source consisting of large bodies that straddle the synchronous orbit. An alternative evolutionary mechanism is offered, which is the gyrophase drift towards the synchronous orbit, of fine grains, which necessarily are electrostatically charged within the Jovian magnetosphere.

Mendis, D. A.↗

NASA NTRS1988

Automated seed manipulation and planting

Activities for the Fall Semester, 1987 focused on investigating the mechanical/electrical properties of wheat seeds and forming various Seed Planting System (SPS) concepts based on those properties. The Electrical Division of the design group was formed to devise an SPS using electrostatic charge fields for seeding operations. Experiments concerning seed separation using electrical induction (rearranging of the charges within the seed) were conducted with promising results. The seeds, when exposed to the high voltage and low current field produced by a Van de Graff generator, were observed to move back and forth between two electrodes. An SPS concept has been developed based on this phenomena, and will be developed throughout the Spring Semester, 1988. The Mechanical Division centered on SPS concepts involving valves, pumps, and fluids to separate and deliver seeds. An SPS idea utilizing the pressure difference caused by air as it rushes out of holes drilled in the wall of a closed container has been formulated and will be considered for future development. Also, a system of seed separation and delivery employing a combination of centrifugal force, friction, and air flow was considered.

Garcia, Ray↗

NASA NTRS1989

Processing polymeric powders

The concept of uniformly and continuously depositing and sinter-fusing nominal 0.1 to 40 microns dimensioned electrostatically charged polymer powder particles onto essentially uniformly spread 5 to 20 micron grounded continuous fiber tow to produce a respoolable thermoplastic composite two-preg was formulated at NASA Langley. The process was reduced to practice under a NASA grant at the University of Akron this spring. The production of tow-preg is called phase 1. The production of ultrafine polymer powders from 5 to 10 percent (wt) polymer solids in solvent is considered. This is phase 0 and is discussed. The production of unitape from multi tow-pregs was also considered. This is phase 2 and is also discussed. And another approach to phase 1, also proposed last summer, was scoped. This is phase 1A and is also discussed.

Throne, James L.↗

NASA NTRS1990

Hazards protection for space suits and spacecraft

A flexible multi-layered covering article for protection against the hazards of exposure to the environment of outer space is disclosed. The covering includes an outer layer section comprising an outermost lamina of woven expanded tetrafluoroethylene yarns (Gore Tex) for protecting against abrasion and tearing, an underlying weave of meta-aramid yarns (Nomex) and para-aramid yarns (Kevlar) for particle impart protection, and electrostatic charge dissipation and control system incorporated therein, and a chemical contaminants control barrier applied as a coating. A middle section includes a succession of thermal insulating layers of polymeric thermoplastic or thermoforming material, each of which is coated with a metal deposit of high infra-red emissivity and low solar radiation absorption characteristics and separated from adjacent insulating layers by a low thermal conductance material. The covering further includes a radiation attenuating layer of a tungsten-loaded polymeric elastomer binder for protecting against bremsstrahlung radiation and an inner layer of rip-stop polyester material for abrasion protection. A chloroprene coating may be supplied the polyester-material for added micrometeroid protection. Securing means of low heat conductance material secures the multi-layers together as a laminar composite.

Kosmo, Joseph J.↗

NASA NTRS1989

Combining LaRC-TPI powder with carbon fiber by electrostatic fluidized bed coating

Thermoplastic polyimide prepreg tow is produced rapidly and efficiently by applying the LaRC-TPI matrix as an electrostatically charged and fluidized powder to electrically grounded and spread carbon fiber tow. The powder is melted after coating to insure adhesion to the fibers and to reduce tow friction. Excellent wetout in towpreg samples is obtained resulting in very flexible prepregs. Processing conditions of this towpreg produced with LaRC-TPI powders from Rogers Corp. and Mitsui Toatsu Chemicals are described. Mechanical properties of the towpreg and unidirectional laminates are presented in detail.

Varughese, Babu↗

NASA NTRS1990

Coagulation of dust particles in a plasma

The electrostatic charge of small dust grains in a plasma in which the temperature varies in time is discussed, pointing out that secondary electron emission might introduce charge separation. If the sign of the charge on small grains is opposite to that on big ones, enhanced coagulation can occur which will affect the size distribution of grains in a plasma. Two scenarios where this process might be relevant are considered: a hot plasma environment with temperature fluctuations and a cold plasma environment with transient heating events. The importance of the enhanced coagulation is uncertain, because the plasma parameters in grain-producing environments such as a molecular cloud or a protoplanetary disk are not known. It is possible, however, that this process is the most efficient mechanism for the growth of grains in the size range of 0.1-500 microns.

Horanyi, M.↗

NASA NTRS1991

UV spectroscopy of Titan's atmosphere, planetary organic chemistry and prebiological synthesis. II - Interpretation of new IUE observations in the 220-335 nm range

The theoretical model developed by McKay et al. (1989) to characterize the size distribution, thermal structure, and chemical composition of the stratospheric haze of Titan is applied to new 220-335-nm albedo measurements obtained with the long-wavelength prime camera of the IUE during August 1987. Data and model predictions are presented in extensive graphs and discussed in detail. It is shown that a simple model with particles of one size at a given altitude does not accurately reproduce the observed features in all spectral regions, but that good general agreement is obtained using a model with a uniformly mixed layer at 150-600 km and a bimodal distribution of small 'polymer' haze particles (radius less than 20 nm) and larger haze particles (radius 100-500 nm). The number densities implied by this model require, however, a mechanism such as electrostatic charging or reaction kinetics to inhibit coagulation of the smaller particles.

Courtin, Regis↗

NASA NTRS1993

Transparent conductive coatings in the far ultraviolet

In certain cases a space-borne optical instrument with a dielectric window requires a transparent conductive coating deposited on the window to remove the electrostatic charge collected due to the bombardment of ionized particles. Semiconductor and metal films are studied for use as transparent conductive coatings for the front window of far ultraviolet camera. Cr is found to be the best coating material. The theoretical search for the semiconductor and metal coating materials and experimental results for ITO and Cr films are reported.

Kim, Jongmin↗

NASA NTRS1994

New jovian ring?

We follow the orbital evolution of small dust particles generated from the break up of comet Shoemaker-Levy 9 (SL9). In addition to the usual perturbations, we also consider electrostatic charging and the consequent magnetospheric effects. We show, that in about ten years following the break up, a small fraction of the dust will settle into orbits well inside the magnetosphere. The forming ring will be comprised of dust particles with radii in the range of 1.5 less than alpha less than 2.5 micrometers that follow retrograde orbits in the radial range of 4.5 less than r less than 6 R(sub J). We estimate the peak optical depth of this new ring in the range of 10(exp -8) less than tau(sub max) less than 2 x 10(exp -6).

Horanyi, Mihaly↗

NASA NTRS1993

The dusty ballerina skirt of Jupiter

We suggest a model to explain the unexpected recurrent dust events that were observed during the Jupiter encounter by the dust detector on board the Ulysses spacecraft. This model is based dust-magnetosphere interactions. Dust particles inside the Jovian magnetosphere collect electrostatic charges and their interaction with the magnetic and electric fields can lead to energization and subsequent ejection. We discuss the dusty regions (ring/halo, `gossamer' ring) and also Io as potential sources for the Ulysses events. This model favors Io as a source. The mass and velocity range of the escaping particles are compatible with the observations, and we also suggest internal periodicities to explain the recurrent nature of the Ulysses dust events.

Horanyi, M.↗

NASA NTRS1999

Electrostatic Hazard Considerations for ODC Solvent Replacement Selection Testing

ODC solvents are used to clean many critical substrates during solid rocket motor production operations. Electrostatic charge generation incidental to these cleaning operations can pose a major safety issue. Therefore, while determining the acceptability of various ODC replacement cleaners, one aspect of the selection criteria included determining the extent of electric charge generation during a typical solvent cleaning operation. A total of six candidate replacement cleaners, sixteen critical substrates, and two types of cleaning swatch materials were studied in simulated cleaning operations. Charge generation and accumulation effects were investigated by measuring the peak voltage and brush discharging effects associated with each cleaning process combination. In some cases, charge generation was found to be very severe. Using the conductivity information for each cleaner, the peak voltage data could in some cases, be qualitatively predicted. Test results indicated that severe charging effects could result in brush discharges that could potentially result in flash fire hazards when occurring in close proximity to flammable vapor/air mixtures. Process controls to effectively mitigate these hazards are discussed.

Fairbourn, Brad↗

NASA NTRS1999

The Mars Surveyor '01 Rover and Robotic Arm

The Mars Surveyor 2001 Lander will carry with it both a Robotic Arm and Rover to support various science and technology experiments. The Marie Curie Rover, the twin sister to Sojourner Truth, is expected to explore the surface of Mars in early 2002. Scientific investigations to determine the elemental composition of surface rocks and soil using the Alpha Proton X-Ray Spectrometer (APXS) will be conducted along with several technology experiments including the Mars Experiment on Electrostatic Charging (MEEC) and the Wheel Abrasion Experiment (WAE). The Rover will follow uplinked operational sequences each day, but will be capable of autonomous reactions to the unpredictable features of the Martian environment. The Mars Surveyor 2001 Robotic Arm will perform rover deployment, and support various positioning, digging, and sample acquiring functions for MECA (Mars Environmental Compatibility Assessment) and Mossbauer Spectrometer experiments. The Robotic Arm will also collect its own sensor data for engineering data analysis. The Robotic Arm Camera (RAC) mounted on the forearm of the Robotic Arm will capture various images with a wide range of focal length adjustment during scientific experiments and rover deployment

Bonitz, Robert G.↗

NASA NTRS1997

Lunar and Planetary Science XXVIII

The present conference discusses such topics as density crossovers in lunar picrites, the geology of the Cassini impact basin, Mars, nanobacteria in carbonates, the properties of shocked aerogels, a chemical model of Comet Halley, lunar mascons, the impact evolution of icy regoliths, the geology of the Venera 8 landing site, the photogeologic mapping of northern Venus, HST observations of Mars, observational constraints on the rotational dynamics of Mars, and primordial magnetic field measurements from the moon. Also discussed are models of the S2 fluorescence spectra of comets, Martian crater ejecta, the heights of Venusian steep-sided domes, cloud-climate interactions on Venus, the Humorum basin geology from Clementine data, an early Amazonian lake in the Gale crater of Mars, nebular fractionations and Mn-Cr systematics, the Rock Chipper planetary surface sample collection, Mariner 10 stereo images of Mercury, remote and local stresses and Calderas on Mars, the electrostatic charging of saltating particles, SO2 detected on Callisto, the Mars Explorer Planetary Data System, an assessment of explosive venting on Europa, the sequential faulting history of the Mars Valles Marineris, a search for Martian sediments, the composition and internal structure of Europa, long-term and 'diurnal' tidal stresses on Europa, and episodic greenhouse climates on Mars.

Source record↗

NASA NTRS1980

Safe Handling Practices

In 1977 Compugraphic Corporation was experiencing an unacceptable failure rate on microelectronic chips. Company engineers suspected that static electricity was causing the trouble because some electronic components are highly susceptible to damage by electrostatic charge. From a NASA Tech Brief, they learned that Rockwell International had prepared a report on safe handling practices for electronic components. NASA provided a Technical Support Package detailing 50 safe handling procedures affecting workers, work areas, equipment and packaging materials. Where poor practices were discovered, re-education of employees and other corrective measures were undertaken.

Source record↗