Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electron spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Study of Al with a combined Auger electron spectrometer-ellipsometer system

Auger electron spectroscopy and ellipsometry were applied in order to measure the optical constants and study the surface chemistry of vapor-deposited Al films and high-purity bulk Al surfaces in situ under vacuum. The optical constants measured were compared with the extinction coefficient computed by the free-electron theory. The contamination of the clean Al surface was in the form of a metal oxide film. Auger electron spectroscopic measurements were used to establish the relationship between the Auger peaks of O (513 eV) and aluminum oxide (53 eV) and changes in the measured optical phase and film thickness. The free path length of the Al Auger electrons (67 eV) in the oxide film was determined, and it was shown that the amplitude of these peaks is a linear function of film thickness down to 0.6 A.

Allen, T. H.↗
NASA NTRS1993

A sulfur segregation study of PWA 1480, NiCrAl, and NiAl alloys

Some nickel based superalloys show reduced oxidation resistance from the lack of an adherent oxide layer during high temperature cyclic oxidation. The segregation of sulfur to the oxide-metal interface is believed to effect oxide adhesion, since low sulfur alloys exhibit enhanced adhesion. X ray Photoelectron Spectroscopy (XPS) was combined with an in situ sample heater to measure sulfur segregation in NiCrAl, PWA 1480, and NiAl alloys. The polished samples with a 1.5 to 2.5 nm (native) oxide were heated from 650 to 1100 C with hold times up to 6 hr. The sulfur concentration was plotted as a function of temperature versus time at temperature. One NiCrAl sulfur study was performed on the same casting used by Browning to establish a base line between previous Auger Electron Spectroscopy (AES) results and the XPS results of this study. Sulfur surface segregation was similar for PWA 1480 and NiCrAl and reached a maximum of 30 at% at 800 to 850 C. Above 900 C the sulfur surface concentration decreased to about 3 at% at 1100 C. These results are contrasted to the minimal segregation observed for low sulfur hydrogen annealed materials which exhibit improved scale adhesion.

Jayne, D. T.↗
NASA NTRS1972

An ESCA study of lunar and terrestrial materials.

The technique of electron spectroscopy for chemical analysis (ESCA) is used to obtain rapid, nondestructive elemental analyses of selected lunar samples, and the chemical shift of the Fe(2p) line in lunar materials is found characteristic of iron in the Fe(2+) state. A difference in binding energy of approximately 0.5 eV is observed between the 0(1s) levels of the terrestrial minerals fayalite and quartz, and effects due to surface oxidation and absorption are also observed in terrestrial materials. The new ESCA technique is based on energy analysis at high resolution of electrons emitted from the surface of a sample on irradiation with X rays and is valuable for the study of the electronic structure of atoms and molecules.

Huntress, W. T., Jr.↗
NASA NTRS1983

Interfacial layers in high-temperature-oxidized NiCrAl

The utility of Auger electron spectroscopy combined with ball cratering for depth analysis of oxide and diffusion layers produced in a Ni-14Cr-24Al alloy by oxidation in air at 1180 C for 25 hr is demonstrated. During postoxidation cooling, the oxide layers formed by this alloy spalled profusely. The remaining very thin oxide was primarily Cr2O3 with a trace of Ni. The underlying metal substrate exhibited gamma/gamma-prime and beta phases with a metallic interfacial layer which was similar to the bulk gamma/gamma-prime phase but slightly enriched in Cr and Al. These data are compared to electron microprobe results from a nominally identical alloy. The diffusion layer thickness is modelled with a simple mass balance equation and compared to recent results on the diffusion process in NiCrAl alloys.

Larson, L. A.↗
NASA NTRS1988

Collisional quenching of atoms and molecules on spacecraft thermal protection surfaces

Preliminary results of a research program to determine energy partitioning in spacecraft thermal protection materials due to atom recombination at the gas-surface interface are presented. The primary focus of the research is to understand the catalytic processes which determine heat loading on Shuttle, Aeroassisted OTV, and NASP thermal protection surfaces in nonequilibrium flight regimes. Highly sensitive laser diagnostics based on laser-induced fluorescence and resonantly-enhanced multiphoton ionization spectroscopy are used to detect atoms and metastable molecules. At low temperatures, a discharge flow reactor is employed to measure deactivation/recombination coefficients for O-atoms, N-atoms, and O2. Detection methods are presented for measuring O-atoms, O2 and N2, and results for deactivation of O2 and O-atoms on reaction-cured glass and Ni surfaces. Both atom recombination and metastable product formation are examined. Radio-frequency discharges are used to produce highly dissociated beams of atomic species at energies characteristic of the surface temperature. Auger electron spectroscopy is employed as a diagnostic of surface composition in order to accurately define and control measurement conditions.

Marinelli, W. J.↗
NASA NTRS1990

Structural and electronic changes in the growth of mercury overlayers on Cu(001) - A helium beam scattering, LEED and ARPES study

We used ABS, LEED and angle-resolved photo-electron spectroscopy (ARPES) to study bilayer films of Hg on Cu(001). In the surface temperature range of 180 to 330 K, the first Hg layer forms two ordered phases, a c(2x2) (with coverage-0.5 of Cu(001)) and a high density (partially commensurate) c(4x4) (coverage-0.62). ARPES data show that there is little or no dispersion of the 5d band of Hg. ABS data show that this layer is not flat, with in-registry Hg atoms lying about 0.15 below the not-in-registry Hg atoms. From ABS we find that the second layer forms a completely registered c(4x4) phase. From ARPES we obtain that the second layer has an electronic structure, particularly the 5d levels, characteristic of bulk mercury. Preliminary results of calculations of the structure of the bilayer are given.

Vidali, G.↗
NASA NTRS2000

Molecular Spectroscopy in Astrophysics: The Case of Polycyclic Aromatic Hydrocarbons

The role of molecular spectroscopy in astrophysics and astrochemistry is discussed in the context of the study of large, complex, carbon-bearing molecules, namely, Polycyclic Aromatic Hydrocarbons or PAHs. These molecular species are now thought to be widespread in the interstellar medium in their neutral and ionized forms. Identifying the carriers responsible for unidentified interstellar spectral bands will allow to derive important information on cosmic elemental abundances as well as information on the physical conditions (density, temperature) reigning in specific interstellar environments. These, in turn, are key elements for a correct understanding of the energetic mechanisms that govern the origin and the evolution of the interstellar medium. A multidisciplinary approach - combining astronomical observations with laboratory simulations and theoretical modeling - is required to address these complex issues. Laboratory spectra of several PAHs, isolated at low temperature in inert gas matrices or seeded in a supersonic jet expansion, are discussed here and compared to the astronomical spectra of reddened, early type, stars. The electronic spectroscopy of PAHs in the ultraviolet, visible, and near-infrared domains is reviewed and an assessment of the potential contribution of PAHs to the interstellar extinction in the ultraviolet and in the visible is discussed.

Salama, Farid↗
NASA NTRS1972

Adhesion, friction, wear, and lubrication research by modern surface science techniques.

The field of surface science has undergone intense revitalization with the introduction of low-energy electron diffraction, Auger electron spectroscopy, ellipsometry, and other surface analytical techniques which have been sophisticated within the last decade. These developments have permitted submono- and monolayer structure analysis as well as chemical identification and quantitative analysis. The application of a number of these techniques to the solution of problems in the fields of friction, lubrication, and wear are examined in detail for the particular case of iron; and in general to illustrate how the accumulation of pure data will contribute toward the establishment of physiochemical concepts which are required to understand the mechanisms that are operational in friction systems. In the case of iron, LEED, Auger and microcontact studies have established that hydrogen and light-saturated organic vapors do not establish interfaces which prevent iron from welding, whereas oxygen and some oxygen and sulfur compounds do reduce welding as well as the coefficient of friction. Interpretation of these data suggests a mechanism of sulfur interaction in lubricating systems.

Keller, D. V., Jr.↗
NASA NTRS1972

Zinc in Entamoeba invadens.

Atomic absorption spectroscopy, electron microprobe analysis, and dithizone staining of trophozoites and cysts of Entamoeba invadens demonstrate that these cells have a high concentration of zinc (approximately one picogram per cell or 1% of their dry weight). In the cysts of this organism, the zinc is confined to the chromatoid bodies, which previous work has shown to contain crystals of ribosomes. The chemical state and function of this zinc are unknown.

Morgan, R. S.↗
NASA NTRS1973

Atom beam surface interaction studies: Experimental system development

Quantitative deposition by standard techniques of adsorbates containing C and Si onto selected substrates is studied. The interaction kinetics of a beam of oxygen, nitrogen, or hydrogen atoms of known flux are investigated by Auger electron spectroscopy and LEED. Desborbed molecules will be analyzed by mass spectroscopy using modulated beam techniques. Experimental conditions permitting, two sets of measurements will be correlated.

Gregory, J. C.↗
NASA NTRS1974

Auger measurements on T-027 samples exposed during the Skylab 2 mission

Auger electron spectroscopy measurements performed on Skylab 2 indicate a low rate of deposition of permanent, continuous film contamination on nickel and gold surfaces positioned on the antisolar side of the spacecraft. These measurements and supportive evidence indicate that for the particular locations and orientations of these samples permanent films of less than 3 nm (30 A) thickness were deposited during an exposure of 40 hours at a temperature of approximately -32 C.

Peters, P. N.↗
NASA NTRS1974

Auger analysis of films formed on metals in sliding contact with halogenated polymers

The use of Auger electron spectroscopy (AES) to search for transferred polymer must contend with the fact that there has been no published work on Auger analysis of polymers. Since this is a new area for AES, the Auger spectra of polymers and of halogenated polymers in particular is discussed. It is shown that the Auger spectra of halogenated polymers have certain characteristics that permit an assessment of whether a polymeric transfer film has been established by sliding contact. The discussion is general and the concepts should be useful in considering the Auger analysis of any polymer. The polymers chosen for this study are the halogenated polymers polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), and polychlorotrifluorethylene (PCTFE).

Pepper, S. V.↗
NASA NTRS1975

Effect of adsorbed chlorine and oxygen on shear strength of iron and copper junctions

Static friction experiments were performed in ultrahigh vacuum at room temperature on copper, iron, and steel contacts selectively contaminated with oxygen and chlorine in submonolayer amounts. The concentration of the adsorbates was determined with Auger electron spectroscopy and was measured relative to the saturation concentration of oxygen on iron (concentration 1.0). The coefficient of static friction decreased with increasing adsorbate concentration. It was independent of the metal and the adsorbate. The results compared satisfactorily with an extension of the junction growth theory to heterogeneous interfaces. The reduction in interfacial shear strength was measured by the ratio sub a/sub m where sub a is the shear strength of the interface with an adsorbate concentration of 1.0, and sub m is the strength of the clean metal interface. This ratio was 0.835 + or - 0.012 for all the systems tested.

Wheeler, D. R.↗
NASA NTRS1974

Adsorption and condensation of Cu on W single-crystal surfaces

The adsorption and condensation of Cu up to several monolayers in thickness on tungsten 110 and 100 single-crystal surfaces are studied by combining low-energy electron diffraction, Auger electron spectroscopy, thermal desorption spectroscopy, work-function measurements, and quartz microbalance thickness measurements in one experimental system. The results show drastic differences in the evolution of the structure, work function, and desorption behavior between 110 and 100 surfaces. These differences are understandable in terms of the atomic roughness of the surfaces.

Bauer, E.↗
NASA NTRS1975

The surface structure of titanium and its interaction with bromine and chlorine

The surface structure and composition of titanium have been studied by electron diffraction and Auger electron spectroscopy in the temperature range 25 to 850 C. Atomically clean, well-defined Ti surfaces were obtained by a combination of argon ion sputtering and thermal treatment at 700 to 800 C. A series of surface superstructures was observed as the crystal temperature was gradually decreased. The development of the superstructures is best explained as due to surface reconstruction as a result of surface relaxation. The interaction of bromine and chlorine vapors with clean Ti surfaces was investigated in the temperature range 25 to 500 C. Bromine exposure at room temperature gave rise to an amorphous surface layer, which on annealing transformed into an epitaxial TiBr2 structure. Chlorine interaction resulted in the formation of an epitaxial TiCl3 on both cold and hot Ti surfaces. Surface impurities inhibited the chemical interaction process on the Ti surface.

Khan, I. H.↗