Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Intensive Processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Adsorption of superplasticizer admixtures on alkali-activated slag pastes

Alkali-activated slag (AAS) binders are obtained by a manufacturing process less energy-intensive than ordinary Portland cement (OPC) and involves lower greenhouse gasses emission. These alkaline cements allow the production of high mechanical strength and durable concretes. In the present work, the adsorption of different superplasticizer admixtures (naphthalene-based, melamine-based and a vinyl copolymer) on the slag particles in AAS pastes using alkaline solutions with different pH values have been studied in detail. The effect of the superplasticizers on the yield stress and plastic viscosity of the AAS and OPC pastes have been also evaluated. The results obtained allowed us to conclude that the adsorption of the superplasticizers on AAS pastes is independent of the pH of the alkaline solutions used and lower than on OPC pastes. However, the effect of the admixtures on the rheological parameters depends directly on the type and dosage of the superplasticizer as well as of the binder used and, in the case of the AAS, on the pH of the alkaline activator solution. In 11.7-pH NaOH-AAS pastes the dosages of the superplasticizers required to attain similar reduction in the yield stress are ten-fold lower than for Portland cement. In this case the superplasticizers studied show a fluidizing effect considerably higher in 11.7-pH NaOH-AAS pastes than in OPC pastes. In 13.6-pH NaOH-AAS pastes, the only admixture observed to affect the rheological parameters is the naphthalene-based admixture due to its higher chemical stability in such extremely alkaline media.

36 MATERIALS SCIENCE↗

Silver(I) Supported Liquid Membranes for Selective Ethylene Recovery from Mixed-Gas Streams of Tandem CO 2 Electrolysis

Large-scale olefin separations from unreacted paraffins and other byproduct gases are primarily done by energy-intensive cryogenic distillation processes at refineries. Silver(I) supported liquid membranes (Ag SLMs) can be implemented at smaller production scales of ethylene (C 2 H 4 ), a critical industrial chemical, such as its electrocatalytic (EC) production from CO 2 . Challenges of EC C 2 H 4 production mainly stem from reducing gases like hydrogen (H 2 ), where the redox reactions pertinent to Ag(I) facilitators diminish olefin transport. Herein we report that aqueous Ag(I) solution in a composite Ag SLM can operate in mixed-gas conditions containing H 2 gas utilizing reduced titania compounds, such as titanium(III) oxide (Ti 2 O 3 ). Embedding Ti 2 O 3 in the polydimethylsiloxane layer of Ag SLM assisted in selectively separating C 2 H 4 from mixed-gas feed streams related to CO 2 electrolysis containing H 2 . The direct exposure of a mixed-gas stream containing C 2 H 4 , CO 2 , CO, N 2 , and CH 4 with as high as 50 vol % H 2 maintained excellent C 2 H 4 separations for 7 days of continuous operation. The Ag SLM provided effective separations of C 2 H 4 from CO (at detection limits), CH 4 (selectivity ratio (α) = 20–30), and H 2 (α = ∼20), but C 2 H 4 from CO 2 (α = 2–4) revealed a slightly lower separation. These data show that aqueous Ag(I) solution(s) used in the SLMs can separate C 2 H 4 for extended periods, even under highly reducing gas conditions. Also, we report C 2 H 4 recovery from the gas mixture produced in the EC CO 2 reduction process. In conclusion, the Ag SLM gave C 2 H 4 selective separation from a five-component complex mixed-gas stream, relevant to tandem CO 2 electrolysis.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Copper Single Atoms Anchored in Porous Nitrogen-Doped Carbon as Efficient pH-Universal Catalysts for the Nitrogen Reduction Reaction

Artificial nitrogen fixation through the nitrogen reduction reaction (NRR) under ambient conditions is a potentially promising alternative to the traditional energy-intensive Haber–Bosch process. For this purpose, efficient catalysts are urgently required to activate and reduce nitrogen into ammonia. Herein, by the combination of experiments and first-principles calculations, we demonstrate that copper single atoms, attached in a porous nitrogen-doped carbon network, provide highly efficient NRR electrocatalysis, which compares favorably with those previously reported. Benefiting from the high density of exposed active sites and the high level of porosity, the Cu SAC exhibits high NH 3 yield rate and Faradaic efficiency (FE), specifically ~53.3 μg$_{NH_3}$ h –1 mg cat –1 and 13.8% under 0.1 M KOH, ~49.3 μg$_{NH_3}$ h –1 mg cat –1 and 11.7% under 0.1 M HCl, making them truly pH-universal. They also show good stability with little current attenuation over 12 h of continuous operation. Cu–N 2 coordination is identified as the efficient active sites for the NRR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pinning ångström-size solid ionic channels for rare-earth element separation

High-purity rare-earth elements are essential for modern technologies, yet current solvent extraction processes are energy-intensive and environmentally harmful because of inadequate selectivity and ligand toxicity. Although combining size exclusion and binding affinity can improve lanthanide separation, the role of long-range confinement remains underexplored. Here we report lanthanide separation in aqueous systems using extremely confined manganese oxide solid ionic channels with optimized layer spacing. Different lanthanides induce distinct solid-state phase transformations in manganese oxide, creating a strong driving force for separation. Two lanthanide groups, differing by ~1.4 Å in spacing, were identified and confirmed to be stable by density functional theory. The narrower confinement of heavier Group II lanthanides improves cross-group separation by increasing the dehydration barrier for lighter Group I lanthanides without inducing strong binding. Here, we further developed a strategy to pin the confinement dimensions and enhance same-group separation, increasing enrichment factors for La–Nd and La–Pr pairs from 1.6 ± 0.1 and 1.5 ± 0.1 to 5.4 ± 0.1 and 4.2 ± 0.1, respectively.

Chemical engineering↗

Overcoming fundamental challenges of the electrochemical nitrogen oxidation reaction

Nitric acid and nitrates play a crucial role in modern agriculture and medicine; however, their commercial production through the Haber–Bosch and Ostwald processes is energy-intensive and generates significant greenhouse gas emissions. Additionally, the rapidly growing global population is expected to significantly increase food demand in the coming decades. Therefore, there is a pressing need to explore sustainable alternatives for synthetic fertilizer production to meet increasing global crop demands while reducing the carbon footprint. The electrochemical nitrogen oxidation reaction (NOR) presents a viable alternative which produces nitrates using renewable electricity. However, NOR is still a nascent reaction that has not been studied extensively, and several key challenges must be addressed as the field develops. In this feature article review, we highlight the set of effective approaches that we have employed for studying this complex reaction and overcoming these challenges, as well as discuss future directions for advancing NOR technology.

Energy - Conversion↗

Molybdenum Carbide Electrocatalysts for Electrochemical Synthesis of Ammonia from Nitrogen: Activity and Stability

Ammonia production has increased from few thousand tons in 1908 to above 200 million tons per year today, revolutionizing the fertilizer industry thanks to the Haber-Bosch (HB) process. However, the HB process is highly energy intensive consuming about 1.4% of fossil energy generated worldwide and releasing 1.87 tons of CO 2 per ton of ammonia produced. This further reduces ammonia’s scope as a carrier fuel for the hydrogen economy. Hence, finding alternative energy efficient ways to synthesize ammonia is important from more than one perspective. Ammonia synthesis from its constituent nitrogen and hydrogen gases is mainly hampered by the nitrogen reduction reaction (NRR) due to the strong N≡N bond (945 kJ mol −1 ). Electrochemical synthesis (ES) routes in this regard offer a milder approach. However, ES of ammonia under different temperatures, utilizing different electrolytes and catalysts has not yet reliably produced ammonia at viable rates and efficiencies. We report an origami-like Mo 2 C cathode catalyst for NRR that achieved a maximum synthesis rate of 2.16 × 10 −11 mol cm −2 s −1 and a faradaic efficiency of 1.8% at 30 °C using Nafion-212 as electrolyte. Origami-like morphology containing numerous kinks appears to improve electrocatalytic activity and show a promising route for fabricating NRR catalysts with higher catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Refractory Linings for Balanced Energy Efficiency, Uptime, and Capacity in Lime Kilns

The rotary kilns used by the pulp and paper industry to regenerate lime in the Kraft process are very energy intensive. Throughout the 90 s, in response to increasing fuel prices, the industry used back up insulation in conjunction with the high alumina brick used to line the burning zones of their kilns. While this improved energy efficiency, the practice of installing insulating brick behind the working lining increased the inner wall temperatures. In the worst case, due to the increased temperatures, rapid brick failures occurred causing unscheduled outages and expensive repairs. Despite these issues, for the most part, the industry continued to use insulating refractory linings in that the energy savings were large enough to offset any increase in the cost of maintaining the refractory lining. Due to the dramatic decline in the price of natural gas in some areas combined with mounting pressures to increasing production of existing assets, over the last decade, many mills are focusing more on increasing the uptime of their kilns as opposed to energy savings. To this end, a growing number of mills are using basic (magnesia based) brick instead of high alumina brick to line the burning zone of the kiln since the lime mud does not react with these bricks at the operating temperatures of the burning zone of the kiln. In the extreme case, a few mills have chosen to install basic brick in the front end of the kiln running a length equivalent to 10 diameters. While the use of basic brick can increase the uptime of the kiln and reduce the cost to maintain the refractory lining, it does dramatically increase the heat losses resulting from the increased operating temperatures of the shell. Also, over long periods of time operating at these high temperatures, damage can occur in the shell. There are tradeoffs between energy efficiency, capacity and uptime. When fuel prices are very high, it makes sense to insulate the lining. When fuel prices are lower, trading some thermal efficiency for increased uptime and capacity seems reasonable. This paper considers a number of refractory linings in an effort to develop optimized operating strategies that balance these factors. In addition to considering a range of refractory materials, the paper examines other factors such as the chain area, discharge dams and other operating variables that impact the service life of the refractory lining. The paper provides recommendations that will help mill personnel develop a strategy to select a refractory lining that is optimized for their specific situation.

Computational Modeling↗

ATOMISTIC CHARACTERIZATION OF METAL-ORGANIC FRAMEWORKS FOR SUB-AMBIENT PRESSURE SWING ADSORPTION OF POST-COMBUSTION CO2 CAPTURE AND SEPARATION

Developing cost-effective and less energy-intensive carbon capture processes for dilute CO2 sources is of high interest. Adsorption-based CO2 capture such as pressure swing adsorption (PSA) is one promising approach to this challenge. PSA and other cyclic adsorption processes are materials-enabled separations that use porous adsorbents, including metal-organic frameworks (MOFs). This thesis examines post-combustion carbon capture in sub-ambient PSA, a potential route to an effective adsorption process, using MOF materials via molecular modeling. We first estimated the reproducibility of CO2 adsorption isotherm measurements in MOFs via literature meta-analysis. This chapter provides a comprehensive summary of the state of knowledge regarding CO2 adsorption in MOFs and its implications for molecular modeling of adsorption in MOFs. We then examined the upper bounds on CO2 swing capacity in sub-ambient PSA by Grand Canonical Monte Carlo (GCMC) simulation of an extensive collection of MOFs. A wide variety of MOFs was found to have swing capacity exceeding 10 mol/kg at sub-ambient temperatures provided that MOFs are appropriately selected based on their physical properties. We also assessed the capability of simple proxies for adsorbent performance and approximate models of cyclic adsorption to predict the outcomes of detailed process models of adsorption-based CO2 capture processes. To this end, we discuss the correlations between predictions from the simpler models and detailed process models. As a separate contribution, molecular modeling of chemical warfare agents (CWAs) adsorption in MOFs was analyzed. Molecular models of adsorption of CO2, CWAs or other molecules typically employ a rigid framework approximation for computational convenience. All real frameworks including MOFs, however, have intrinsic flexibility due to thermal vibrations. We examine the implications of this simple observation for quantitative predictions of the properties of adsorbed CWAs.

Park, Jongwoo↗

Hybrid silica gel made of porous silica particles

Compositions, methods, and articles of manufacture relating to a transparent/translucent insulating material formed by a hybrid silica gel composition made of porous silica particles joined with each other by silane crosslinking through a three dimensional silica network. In one embodiment, the hybrid silica gel includes small porous silica particles, and is made by a process that avoids energy intensive techniques.

Rimsky, Charles Joseph↗

Ultra-fast Boriding for Improved Energy Efficiency and Reduced Emissions in Materials Processing Industries (Final Report)

High-temperature treatment processes (such as nitriding, carburizing, and boronizing) are well-established and used widely by numerous industrial sectors to achieve superior mechanical and tribological properties on all kinds of engineering components made out of ferrous materials. Unfortunately, these traditional processes are very slow and energy intensive, and they produce large amounts of CO 2 emissions and liquid/solid wastes to deal with during and after each process run. From economic and environmental points of views, it is highly desirable to develop and implement novel surface treatment technologies that are quick, cheap, clean, and energy efficient. The main objective of this project was to develop an industrial-scale ultra-fast boriding process that realizes all of these desirable attributes. The other objectives of the project were to demonstrate the superior performance, properties, and durability of borided surfaces under relevant test conditions and to transfer optimized technology to industry for large-scale practice. Major research activities included process design, modeling, product optimization, and scale-up. This project has achieved all of its stated objectives, and the industrial-scale boriding process has been successfully transferred to industry. Specifically, all of the original tasks have been completed, and the milestones have been met by scaling up from a small proof-of-concept system (which could only handle about 0.25 kg melt) to a commercial-scale boriding unit that can handle up to 4,000 kg melt. Mechanical and tribological testing of borided test samples and industrial parts has also been carried out, and their superior performance over a broad range of test conditions has been validated. With the large-scale, ultra-fast boriding process, we could achieve thick, hard, and uniform boride layers on all kinds of steel components, even after only 5 min of treatment time. We could also attain excellent uniformity in thickness over the entire exposed surfaces — even in the very sharp corners or interior sections of odd-shaped workpieces. Boriding of numerous nonferrous materials was also demonstrated, and thick boride layers (up to 300 µm in thickness) were achieved on their outer surfaces. With the use of a large-scale boriding unit at Argonne National Laboratory, our research team has successfully treated large numbers of industrial components in a batch-to-batch operation without creating any in-house gaseous emissions or producing solid and/or liquid wastes. With the use of this large unit, our team achieved surface hardness values of 15 to 45 GPa, depending on the type of metal or alloy being treated. The thick boride layers attained on steel components consisted of FeB, Fe 2 B, and Fe 3 B phases, and their hardness values ranged from 16 to 22 GPa. Layers consisting of Fe 2 B phase alone are also possible with this process, and in the case of nonferrous materials. Overall, because of the much superior property and performance improvements in treated products, much lower energy consumption, and nearly zero environmental waste and emissions, the demonstrated boriding technology may find broad applications in many cross-cutting industries. Mechanical wear, abrasion, erosion, corrosion, and scuffing are often life-limiting factors in mechanical systems that are used in manufacturing, transportation, aerospace, agricultural, earth-moving, and mining equipment; but the machine components treated by ultra-fast boriding can effectively prevent such degradations. In this project, the ultra-fast boriding was proven to be most ideal for the treatment of iron and many other ferrous alloys, like stainless steel. We have shown through our experimental studies that our method can also be used for the treatment of many nonferrous metals and alloys. In the case of superalloys and Ni 3 Al intermetallic materials, more than a 300-µm thick boride layer can be achieved with our boriding furnace within 15 to 30 min (which results in five times the hardness of the base materials). Pre-carburized steels and nonferrous alloys can also be treated by the new boriding technique. Overall, very thick (more than a quarter millimeter) and hard surface layers produced by ultra-fast boriding are expected to have a positive impact on the performance and durability of all types of machine components that are subject to corrosive, erosive, abrasive, and adhesive wear. Since the focus of our project was primarily on the large-scale boriding of ferrous materials, in this report, we will broadly cover the results from various ferrous materials that were used in our experiments. Another transformational feature of ultra-fast boriding is that it does not create any greenhouse gas emissions or solid and/or liquid wastes to deal with during or after the treatment; hence, it is an ultra-green technology (no need for expensive waste disposal and/or treatment facilities). It may eliminate the use of natural gas and other carbon-based fuels as the primary energy source in the heat treatment industry (which is the most common practice at present), thus, minimizing the CO 2 , NO x , CO, and SO x emissions that are generated in large quantities by current heat treatment practices. The main ingredient used during boriding is borax, which is a natural mineral. Our demonstrated and scaled-up technology can now be used in a wide range of manufacturing and transportation applications. It can deliver thick and uniform boride layers of more than 200 µm in steels, if needed, over the entire exposed surfaces — even in the very sharp corners or interior sections of workpieces (which are typical of gears, tools, pipes, and other components). Beneath the distinct boride layers is an equally-thick boron diffusion layer or zone, which is comparable to the diffusion zones achieved by carburizing and nitriding processes. In the cases of traditional boriding, nitriding, and/or carburizing methods, achieving such layer thickness and case depths would have taken several hours, and these surfaces would not have achieved the same levels of hardness and other desirable properties as they do with ultra-fast boriding. Some of the key stakeholders of ultra-fast boriding technology include companies that are active in heat-treatment, thermal-diffusion, and hard-coating processes; metal-forming, machining, and other manufacturing processes; and technologies related to transportation (including original equipment manufacturers for autos), mining and oil exploration, agricultural and heavy equipment. Bodycote Thermal Processing was the cost-sharing industrial partner and licensee in this project. They also provided test components and technical and commercial information pertaining to industrial components that are most suitable for ultra-fast boriding. Bodycote also coordinated some of the field tests and metallurgical examinations. Overall, ultra-fast boriding is a transformational technology that can complement, if not replace, many of the energy- and carbon-intensive surface treatment processes that are in use today, such as conventional boriding, carburizing, nitriding, carbo-nitriding, and physical and chemical vapor deposition. In our project, the developed technology was scaled-up and proven to be an ultra-green, ultra-efficient process that can drastically reduce costs, increase productivity, and improve the performance and reliability of machine components used in cross-cutting industrial applications.

Erdemir, Ali↗

Relationship between the kinetic energy budget and intensity of convection

Synoptic data collected over the eastern United States during the fourth Atmospheric Variability Experiment, April 24 and 25, 1975, is used to study the relationship between the kinetic energy budget and the intensity of convective activity. It is found that areas of intense convective activity are also major centers of kinetic energy activity. Energy processes increase in magnitude with an increase in convection intensity. Large generation of kinetic energy is associated with intense convection, but large quantities of energy are transported out of the area of convection. The kinetic energy budget associated with grid points having no convection differs greatly from the budgets of the three categories of convection. Weak energy processes are not associated with convection.

Fuelberg, H. E.↗

Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing

Friction extrusion (FE) is a novel solid-state process for synthesis and recycling of metals and alloys. The novelty of FE is that it utilizes the frictional heating and extensive plastic deformation intrinsic in the process to stir, mechanically alloy, consolidate, and convert powders, chips, and other recyclable feedstock metals into a usable product form of highly engineered materials. FE represents a potentially transformational sustainable manufacturing technology. Being a solid-state process, it eliminates the energy-intensive melting and solidification steps, which are necessary in the conventional metal recycle and synthesis processes. Therefore, FE is a highly energy-efficient, practically zero-emission, and economically competitive process. Here, in this work, the concept and configuration of FE are introduced, the energy-saving advantage of FE is analyzed, the feasibility of FE is demonstrated with synthesizing Al alloys, and the results of some metallographic and mechanical properties studies are presented. A prognosis of the friction extrusion technology is outlined.

36 MATERIALS SCIENCE↗

Nitrogenase Inspired Peptide-Functionalized Catalyst for Efficient, Emission-Free Ammonia Production

Ammonia production is one of the most important industrial processes in the world, as the major component of fertilizer to sustain higher food production. It is also one of the most energy intensive and carbon intensive chemical processes worldwide, primarily due to the steam methane reforming step to produce hydrogen for the reaction. Currently, ammonia is produced via the Haber Bosch process, which requires high temperature and pressure, and has low equilibrium efficiency. Due to these reaction conditions, the process is most economical at extremely large scale (100,000s of tons per day). In order to enable more distributed production scales which better match with renewable energy input and sustainable reactant sources, alternative methods of ammonia synthesis are needed, which scale more effectively and economically. One such approach is electrochemical synthesis based on ion exchange membrane cells. Peptide templating to form catalyst nanoparticles of controlled size, combined with peptide surface adsorbtion to model the nitrogenase active site, was used to develop novel catalyst materials and deposit them on electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selecting Adsorbents to Separate Diverse Near-Azeotropic Chemicals

Industrial separations of near-azeotropic chemicals, species with very similar boiling points, are energy- and capital-intensive. Adsorption-based processes can energy-efficiently separate near-azeotropic mixtures provided suitable adsorbent materials can be found. Among the full diversity of industry-relevant molecules, millions of these mixtures exist, meaning that discovery of mixture-specific adsorbents by direct experiment is infeasible. We show that vast numbers of adsorbents and adsorbing molecules can be explored in a powerful way by coupling atomistic simulations with machine learning. This concept is demonstrated by describing the adsorption of ~54000 industry-relevant chemicals in an experimentally derived set of thousands of metal–organic framework materials. Here, our results identify thousands of near-azeotropic mixtures that can be efficiently separated using adsorption and open possibilities for creating adsorption processes for complex mixtures with many components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photo-Induced Hydrogen Production from Formic Acid Using a Palladium Catalyst

Liquid organic hydrogen carriers (LOHCs) are recognized as promising sustainable hydrogen (H 2 ) carriers due to their high volumetric capacity and ability to store H 2 at ambient conditions, eliminating the need for energy-intensive liquefaction or compression processes associated with H 2 or ammonia gas. One of the main current drawbacks, however, is LOHCs’ high energy demand for H 2 release. This work presents the photo-induced liberation of H 2 from formic acid (FA) as a liquid H 2 carrier, using visible light and well-established 5 wt% palladium nanoparticles supported over carbon (Pd/C). We show that low-power light-emitting diodes (LEDs) produced higher gas flow than their thermal baseline (35 °C), with 27.2 mL/min and 7.72 mL/min, respectively. Further, the rate of gas evolved with light intensity, catalyst loading, and the concentration of FA. Light-induced dehydrogenation shows similar deactivation as the known thermal mechanisms, such as the decreased Pd 2+ /Pd 0 ratio and Pd nanoparticle agglomeration. Hence, these observations suggest a photothermal mechanism, whereby the LED provides heat efficiently absorbed by the Pd/C catalyst and enhanced by Pd’s ability to absorb light, thereby driving the FA dehydrogenation reaction at ambient conditions.

08 HYDROGEN↗

Computer–aided process intensification: Challenges, trends and opportunities

Chemicals based products and the processes that manufacture them play important roles in sustaining our society. Chemical, biochemical, petrochemical and related processes are characterized by either conversion of specific raw materials to desired chemicals or extraction of desired chemicals from specific raw materials. Well–known examples in the first category are the conversion of methanol and acetic acid to form methyl acetate and water, and, carbon dioxide hydrogenation to methanol via the reverse water gas shift reaction. In the second category, the use of de–methanizer, de–ethanizer, de–propanizer, and so on, separation steps in gas processing plants are well–known. In the conversion–based processes, as the conversions of raw materials are usually not 100% complete, energy intensive downstream separation techniques need to be employed to separate the desired products and recycle the unreacted raw materials. Note that the conversion process itself may also be energy intensive. In the extraction–based processes where product chemicals do not usually represent 100% of the raw material, energy intensive separation techniques are commonly employed to achieve the desired separations. This means that for both categories of processes, energy in different forms need to be supplied and the processes during operation have the potential to produce waste that may lead to negative environmental impacts and cause supply chain issues. Furthermore, planet earth is facing challenges with respect to energy, water, food, and environment, and significant improvements in process efficiencies of new and/or existing processes are needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resource intensities of the front end of the nuclear fuel cycle

This paper presents resource intensities, including direct and embodied energy consumption, land and water use, associated with the processes comprising the front end of the nuclear fuel cycle. These processes include uranium extraction, conversion, enrichment, fuel fabrication and depleted uranium de-conversion. To the extent feasible, these impacts are calculated based on data reported by operating facilities, with preference given to more recent data based on current technologies and regulations. All impacts are normalized per GWh of electricity produced. Uranium extraction is seen to be the most resource intensive front end process. Combined, the energy consumed by all front end processes is equal to less than 1% of the electricity produced by the uranium in a nuclear reactor. Land transformation and water withdrawals are calculated at 8.07 m{sup 2} /GWh(e) and 1.37x10{sup 5} l/GWh(e), respectively. Both are dominated by the requirements of uranium extraction, which accounts for over 70% of land use and nearly 90% of water use.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating the energy performance of a hybrid membrane-solvent process for flue gas carbon dioxide capture

In this study, a particularly energy intensive step in the conventional amine absorption process to remove carbon dioxide is solvent regeneration using a steam stripping column. An attractive alternative to reduce the energy requirement is gas pressurized stripping, in which a high pressure noncondensable gas is used to strip CO 2 off the rich solvent stream. The gas pressurized stripping column product, having CO 2 at high concentration and high partial pressure, can then be regenerated readily using membrane separation. In this study, we performed an energetic analysis in the form of total equivalent work and found that, for capturing CO 2 from flue gas, this hybrid stripping process consumes 49% less energy compared to the base case conventional MEA absorption/steam stripping process. We also found the amount of membrane required in this process is much less than required for direct CO 2 capture from the flue gas: approximately 100-fold less than a previously published two-stage cross-flow scheme, mostly due to the more favorable pressure ratio and CO 2 concentration. There does exist a trade-off between energy consumption and required membrane area that is most strongly affected by the gas pressurized stripper operating pressure. While initial analysis looks promising from both an energy requirement and membrane unit capital cost, the viability of this hybrid process depends on the availability of advanced, next generation gas separation membranes to perform the stripping gas regeneration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗