Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development and demonstration of a methodology to evaluate high burnup fuel susceptibility to pulverization under a loss of coolant transient

For economic reasons, the US nuclear industry is renewing efforts to build a technical basis to extend rod average burnup limits above the current regulatory burnup limit of 62 GWd/MTU. The primary driver is to increase pressurized water reactor cycle lengths to 24 months, reducing the number of fresh fuel assemblies and core design constraints, thereby making core energy utilization more efficient. However, fuel pellet fragmentation and pulverization, termed high burnup fuel fragmentation (HBFF), has been observed in the high burnup (>90 GWd/MTU) Halden loss-of-coolant-accident (LOCA) integral test series. The issue gained attention when fuel fragmentation and pulverization were also observed closer to the current US regulatory limit during the US Nuclear Regulatory Commission (NRC) sponsored out-of-core integral test at Studsvik Nuclear in early 2011. This led to NRC concerns with potential changes to fuel and core designs relative to fuel pellet pulverization. In a letter to the NRC Commissioners, the staff specifically identified a need to “…define the boundary of safe operation for key fuel design and operating parameters,” stating that “the staff is challenged to evaluate the acceptability of future fuel design advancements and fuel utilization changes.” As such, it can be concluded that HBFF and potential dispersal into the reactor coolant system introduces additional complications in light-water reactor (LWR) fuel safety evaluations. However, it is not clear how much fuel will be susceptible to HBFF; nor has there been a methodology developed to evaluate fuel susceptibility to HBFF. To that end, this paper proposes an analysis methodology to assess fuel susceptibility to HBFF during LOCA scenarios. The work presented here uses the BISON fuel performance code to evaluate a representative pressurized water reactor fuel rod exposed to a rod average burnup of 75 GWd/MTU. Sensitivity studies investigated the impact of the peak cladding temperature, transient fission gas released, and pre-transient fission gas release on cladding ballooning and burst timing. Subsequently, a methodology to assess fuel susceptibility to HBFF will be developed based on experimental data published in the open literature. The methodology will then be demonstrated by calculating the mass of fuel susceptibility to HBFF. The BISON results conclude that increasing peak cladding temperature drastically decreased time to failure, and decreased balloon size both of which have been confirmed experimentally. Additionally, the effect of pre-transient and transient fission gas release affected cladding balloon size and burst timing. Finally, fuel susceptibility to HBFF significantly decreased as a function of peak cladding temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Exploring nuclear structure with multiparticle azimuthal correlations at the LHC

Details of the nuclear structure of Xe, such as the quadrupole deformation and the nuclear diffuseness, are studied by extensive measurements of anisotropic-flow-related observables in Xe–Xe collisions at a centre-of-mass energy per nucleon pair $\sqrt{s_{NN}}$ = 5.44 TeV with the ALICE detector at the LHC. The results are compared with those from Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV for a baseline, given that the 208 Pb nucleus exhibits a very weak deformation. Furthermore, comprehensive comparisons are performed with a state-of-the-art hybrid model using IP-Glasma+MUSIC+UrQMD. It is found that among various IP-Glasma+MUSIC+UrQMD calculations with different values of nuclear parameters, the one using a nuclear diffuseness parameter of α 0 = 0.492 and a nuclear quadrupole deformation parameter of β 2 = 0.207 provides a better description of the presented flow measurements. These studies represent the first systematic exploration of nuclear structure at TeV energies, utilizing a comprehensive set of anisotropic flow observables. The measurements serve as a critical experimental benchmark for rigorously testing the interplay between nuclear structure inputs and heavy-ion theoretical models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Stabilizing alkaline fuel cells with a niobium-doped brookite titanium dioxide catalyst support

Anion-exchange membrane fuel cells represent a promising and scalable approach for hydrogen energy utilization. However, their development is hindered by the weak bonding between metal catalysts and carbon supports, along with challenges in fabricating electronically/ionically conductive electrodes. Here, we report a composite cathode of Nb-doped brookite TiO 2 nanorods that have robust stability when combined with Pt nanoscale catalysts in an alkaline fuel cell. The composite cathode, fabricated without the addition of an ionomer, delivers a power density of 419 mW cm −2 at a current density of 650 mA cm −2 and a voltage retention of 81% at 100 mA cm −2 after 25 h, substantially outperforming a cathode fabricated from commercial Pt/C. Further investigations of the chemical structure, anion exchange capacity, and mass transfer resistance reveal that a solvent residue derived from N-methylpyrrolidone plays an important role in charge transfer and mass transport in the alkaline fuel cell.

alkaline fuel cell↗
DOE OSTI2020

Ultrafast Reaction Mechanisms in Perovskite Based Photocatalytic C–C Coupling

Solar driven carbon-carbon (C-C) bond formation is a new direction in solar energy utilization. Earth abundant nanocrystal based photocatalysts are highly sought after as they can potentially eliminate expensive noble metal catalysts. A detailed understanding of the underlying reaction mechanisms could provide guidance in designing new systems that can activate a larger class of small molecules. Here, we employ transient absorption spectroscopy to study a model C-C bond formation reaction, i.e., a-alkylation of aldehydes catalyzed by colloidal CsPbBr3 nanocrystals (NCs). We find that both electrons and holes undergo ultrafast charge transfer (~50 ps) from photoexcited perovskite NCs to reactant molecules. A charge separated state lives for more than 0.8 µs, enabling a radical mechanism to form the C-C bonds. We discuss the differences between the NCs photoredox catalysts and the molecular catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Dynamic operation and reaction network coupling in solid oxide electrochemical reactors

Solid oxide cells have traditionally been confined to operation as standalone electrolyzers or fuel cells, with research predominantly focused on materials performance. Here, this Comment highlights opportunities to leverage integrated faradaic and non-faradaic reactions alongside dynamic operation in these electrochemical membrane reactors to maximize energy utilization and expand product scope.

Cho, Yoon Jin [University of Michigan, Ann Arbor, ↗
DOE OSTI2021

The environmental footprint of data centers in the United States

Much of the world's data are stored, managed, and distributed by data centers. Data centers require a tremendous amount of energy to operate, accounting for around 1.8% of electricity use in the United States. Large amounts of water are also required to operate data centers, both directly for liquid cooling and indirectly to produce electricity. For the first time, we calculate spatially-detailed carbon and water footprints of data centers operating within the United States, which is home to around one-quarter of all data center servers globally. Our bottom-up approach reveals one-fifth of data center servers direct water footprint comes from moderately to highly water stressed watersheds, while nearly half of servers are fully or partially powered by power plants located within water stressed regions. Approximately 0.5% of total US greenhouse gas emissions are attributed to data centers. We investigate tradeoffs and synergies between data center's water and energy utilization by strategically locating data centers in areas of the country that will minimize one or more environmental footprints. Our study quantifies the environmental implications behind our data creation and storage and shows a path to decrease the environmental footprint of our increasing digital footprint.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

New H erwig7 underlying event tune: From RHIC to LHC energies

We present parameter sets corresponding to new underlying event tunes for the H erwig7.3 Monte Carlo event generator. The existing H erwig tunes are in good agreement with LHC data, however, they are not typically designed for center-of-mass energies below $\sqrt{𝑠}$ = 300 GeV. The tunes presented in this study can describe midrapidity data collected at the nominal RHIC energy of $\sqrt{𝑠}$ = 200 GeV as well as higher center-of-mass energies utilized by experiments at the LHC and Tevatron. The base “New Haven” tune is developed by fitting minimum-bias simulations of proton-proton ($𝑝⁢𝑝$) collisions to midrapidity identified hadron and jet data from the STAR experiment. The “Nashville” tune includes a separate set of parameters developed by tuning to Tevatron proton-antiproton ($𝑝\bar{⁢𝑝}$) data at $\sqrt{𝑠}$ = 300, 900 and 1960 GeV from CDF, and LHC $𝑝⁢𝑝$ measurements from CMS at $\sqrt{𝑠}$ =7 TeV, in addition to the STAR measurements. Both new tunes demonstrate significant improvements over the recommended default tune currently included in the latest version of H erwig for minimum bias production. As such, we advocate using these tunes for future simulation studies at midrapidity by experimental collaborations at RHIC (STAR and sPHENIX) and the LHC (ALICE, ATLAS, and CMS).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Machine Learning-based False Data Injection Attack Detection and Localization in Power Grids

Cyberattacks on critical infrastructures can be catastrophic and bring nations to their knees. Therefore, detecting these attacks is crucial and challenging. This paper presents a novel approach for detecting and locating cyberattacks affecting an electrical power system. The adversary employs a man-in-the-middle technique to inject false data into the communication between distributed energy resources (DER) and Microgrid Controller (MGC) with the goal of disrupting power delivery. The approach for detection and localization is based on integrating multiple machine learning-based anomaly detection models that combine network traffic data and grid measurements. Experiments are performed to assess the method's performance using a hardware-in-the-loop real-time simulation testbed which includes Modbus TCP/IP communication. Power system topology and operating conditions are based on actual topology and real-world data provided by the Holy Cross Energy utility network. Results confirm that the method can be successfully employed for detecting and localizing cyberattacks.

Leao, Bruno P.↗
DOE OSTI2023

Accelerating Low-Income Financing and Transactions (LIFT) for Solar Access Everywhere (Final Technical Report)

The Accelerating Low-Income Financing and Transactions (LIFT) for Solar Access Everywhere project’s goal was to expand Low-to-Moderate Income (LMI) solar access for homeowners and renters. The LIFT project researched and gathered data on 453 LMI community solar project across the country. Following three years of research, the project delivered three groundbreaking research papers in June 2022, focused on 1) customer experience, 2) the growth of community solar programs, and 3) project-level financial best practices for serving LMI communities. These were followed by a user-friendly web-based Toolkit allowing users to interact with project data and key findings in November 2022. The customer experience research examined community solar subscribers’ primary motivations to join and remain satisfied with projects. Our research identified 453 projects across the country that dedicated some portion of the system capacity to LMI households. Seventeen of these projects participated in the LIFT customer experience research, allowing the project team to survey their customers and gain insight into how LMI subscribers feel about community solar and the programs that serve them. Subscribers in our sample indicated that the most critical issue that motivated them to participate in their program, however, was not savings but helping the environment. This was true for both LMI and non-LMI subscribers. Helping the environment was also the most important issue for LMI subscribers to measure how well their program was working for them. LIFT also explored how rapidly community solar has grown since its inception in 2006, publishing results in the Growth of U.S. Community Solar Serving LMI Households report. The results showed that community solar projects serving LMI households are one of the fastest growing segments of the solar industry. The report identifies and recommends ways developers should overcome real or perceived risks to LMI customer acquisition and subscriber management. Through the analysis of community solar project finance research, LIFT showed that most community solar projects serving LMI households are financed in the same ways mainstream community solar projects are financed. The value stacks and financial returns are no different, although LMI inclusion and participation rate varied across programs in our sample, ranging from between 10% and 100%. Based on the findings from the LIFT research, the team built a web-based user-friendly Toolkit, consisting of case studies, project finance best practices, and several tools built around the national dataset of 453 community solar projects that serve LMI households. These allow users to engage with the dataset in multiple ways; to explore the landscape of LMI community solar in the U.S., and to design community solar projects to optimize LMI inclusion, equity, and savings levels. The Toolkit also includes a library of LIFT-generated and LIFT-curated resources for users to learn more about how to best serve LMI communities through community solar. LIFT officially published the Toolkit on October 31, 2022, followed by a launch event (public webinar) on November 17, 2022. The core LIFT partners continue to engage in outreach and dissemination efforts to promote the LIFT Toolkit and research publications. Our driving motivation is to continue enabling solar developers to leverage the findings of this three-year research effort. By implication, the LIFT Toolkit is designed for use by utilities, energy service providers, and financiers or investors as a learning and decision-making tool to rapidly scale project models that optimize LMI inclusion and maximize real household savings.

14 SOLAR ENERGY↗
DOE OSTI2022

Ethanol to Para-xylene via Methyl Benzaldehyde

Para-xylene is an intermediate compound to several valuable commodity chemicals including polyethylene terephthalate (PET) and currently produced from fossil feedstock through a complex sequence of steps utilizing energy intensive process. Recent work from PNNL has demonstrated the conversion of ethanol produced from waste feedstocks such as municipal solid waste to para-xylene via simple three step process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cation Migration and LSCF/SDC Decomposition Related to Long-Term Operation Mode as Revealed by Electron Microscopy

This study utilized energy dispersive spectroscopy (EDS) in a scanning electron microscope (SEM) and a scanning transmission electron microscope (STEM) in order to track cation migration and related particle decomposition for air electrode components of solid oxide cells. The influence of a Sm-doped ceria (SDC) barrier layers was assessed for three operation modes (fuel cell, electrolysis, reversible) over long time periods (1000-1500 hours). Composition profiles across air electrode/electrolyte interfaces indicated negligible accumulation of La/Sr cations to the yttria-stabilized zirconia (YSZ) electrolyte during operation. Instead, air electrode particles composed of SDC and/or La-Sr-Co-Fe-oxides (LSCF) exhibited decomposition by Sr evaporation and Sm migration to LSCF particle edges.

Picard, Yoosuf↗
DOE OSTI2024

Potential Integration Between Residual Biogenic Process Resources and Green Hydrogen [Slides]

This presentation highlights previously published analysis on the use of off-gases from biomass pyrolysis processes towards energy utilities. The potential for use of pyrolysis off-gases in existing steam reformers for green hydrogen production is assessed. Impacts on various operations within a steam reforming system (with natural gas as the primary base feed) from the introduction of pyrolysis off-gases in various proportions are quantified to assess the feasibility of reusing existing industrial facilities with renewably sourced gases.

09 BIOMASS FUELS↗
DOE OSTI2024

Sustainable Solar Energy for Hughes Village (Hudotl’eekkaakk’e Tribe) (Final Technical Report)

Hughes Village Council is the local Tribal government for Hughes, Alaska. With the funding from this project, the Village Council designed and installed a 120kW solar Photo Voltaic (PV) array with a 250 kW/335kWh lithium-ion battery bank that has offset diesel consumption in the community by an estimated 10% per year. This translates to approximately 6,000 gallons of fuel per year. The goal is to reduce diesel consumption and turn the diesel generators off for certain periods of the Alaskan summer when solar PV is abundant and electrical loads in the community are low. Daily generator logs from the community show an average load of approximately 50kW-60kW with peaks ranging from 100kW-160kW. This project aligns with the tribe’s mission to work towards tribal energy sovereignty, utilizing sustainable energy technologies, and their overall goal of 25% clean energy by 2025.

14 SOLAR ENERGY↗
DOE OSTI2025

Neutron moderation at IPF

We discuss here the possibility of using the Isotope Production Facility (IPF) at LANSCE to test the feasibility and performance of a graphite cube to create a neutron target. The idea of a neutron target enables the measurement of neutron induced reactions in inverse kinematics. This idea is part of the LANSCE strategy to stay a worldwide leader for neutron-induced research. The proof of-principle is the core of the LDRD project 20240004DR. The first steps are a series of activation experiments with different neutron energy distributions. Figs. 1 and 2 show a graphite cube built and simulated from pieces available at LANSCE. First activation experiments have already been performed at lower neutron energies utilizing (p,n) reactions on Li and Be.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

V-INT: Automated Vulnerability Intelligence and Risk Assessment

The project team, including the University of Arkansas (UA) as the lead, the University of Arkansas at Little Rock (UALR), Network Perception (NP), and Bastazo, has successfully researched, developed, and demonstrated the V-INT toolset, and also integrated it into the commercial products of NP (i.e., NP-View) and Bastazo (i.e., Spartan). The end product is a cybersecurity software tool for energy utilities that can automatically assess the risks of software vulnerabilities in an organization’s assets considering the organization’s firewall policies. It allows security operators to identify the small portion of vulnerabilities that poses true threats to their system (i.e., those that are not protected by firewall policies) and prioritize the mitigation of these vulnerabilities to minimize risks. It also allows security operators to identify the vulnerability-induced attack paths under their organization’s firewall policy, providing effective decision supports for mitigating potential attacks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Evaluation of Apparent Metabolizable Energy and Apparent Ileal Amino Acid Digestibility of Spirulina (Arthrospira platensis) in Broiler Chickens and Laying Hens

Our study objective was to determine the apparent metabolizable energy (AME) and apparent ileal amino acid digestibility (AIAAD) of spirulina fed to broiler chickens and laying hens using the difference method. In both experiments, birds were either fed corn-soybean meal basal diets, containing no spirulina and formulated to provide the nutrient requirements of either broilers or layers, or fed test diets consisting of 25% spirulina and 75% of the appropriate basal diet. Titanium dioxide was added to all diets as an indigestible marker. The diets were fed to 10 replicate cages/treatment of broilers and 15 replicate cages/treatment of laying hens. The AME of spirulina for broilers was significantly lower (p < 0.05) (2368 ± 104 kcal/kg, as fed) than for laying hens (3144 ± 173 kcal/kg, as fed), suggesting bird type and age may influence energy utilization. The AIAAD of spirulina fed to broiler chickens did not differ from that of laying hens (p > 0.05), except for valine, alanine, and glycine, which were all significantly higher in laying hens (p < 0.05). Overall, the AIAAD for nonessential amino acids averaged 81.1%, with no significant difference between essential and nonessential amino acids. Differences in spirulina nutrient content cited in the literature support further research to determine the optimal inclusion of this alternative ingredient in broiler and layer diets.

Agriculture↗
DOE OSTI2021

Systemwide Considerations for Electrification of Transportation in Islands and Remote Locations

Electric vehicles (EVs) represent an important socio-economic development opportunity for islands and remote locations because they can lead to reduced fuel imports, electricity storage, grid services, and environmental and health benefits. This paper presents an overview of opportunities, challenges, and examples of EVs in islands and remote power systems, and is meant to provide background to researchers, utilities, energy offices, and other stakeholders interested in the impacts of electrification of transportation. The impact of uncontrolled EV charging on the electric grid operation is discussed, as well as several mitigation strategies. Of particular importance in many islands and remote systems is taking advantage of local resources by combining renewable energy and EV charging. Policy and economic issues are presented, with emphasis on the need for an overarching energy policy to guide the strategies for EVs growth. The key conclusion of this paper is that an orderly transition to EVs, one that maximizes benefits while addressing the challenges, requires careful analysis and comprehensive planning.

33 ADVANCED PROPULSION SYSTEMS↗