Search NASA⌕ Search

SEARCH · Search NASA

Results for “Entry Descent Landing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Entry, Descent, and Landing technological barriers and crewed MARSvehicle performance analysis

Mars has been explored historically only by robotic crafts, but a crewed mission encompasses several new engineering challenges – high ballistic coefficient entry, hypersonic decelerators, guided entry for reaching intended destinations within acceptable margins for error in the landing ellipse, and payload mass are all critical factors for evaluation. A comprehensive EDL parametric analysis has been conducted in support of a high mass landing architecture by evaluating three types of vehicles −70° Sphere Cone, Ellipsled and SpaceX hybrid architecture called Red Dragon as potential candidate options for crewed entry vehicles. Aerocapture at the Martian orbit of about 400 km and subsequent Entry-from-orbit scenarios were investigated at velocities of 6.75 km/s and 4 km/s respectively. A study on aerocapture corridor over a range of entry velocities (6–9 km/s) suggests that a hypersonic L/D of 0.3 is sufficient for a Martian aerocapture. Parametric studies conducted by varying aeroshell diameters from 10 m to 15 m for several entry masses up to 150 mt are summarized and results reveal that vehicles with entry masses in the range of about 40–80 mt are capable of delivering cargo with a mass on the order of 5–20 mt. For vehicles with an entry mass of 20 mt to 80 mt, probabilistic Monte Carlo analysis of 5000 cases for each vehicle were run to determine the final landing ellipse and to quantify the statistical uncertainties associated with the trajectory and attitude conditions during atmospheric entry. Strategies and current technological challenges for a human rated Entry, Descent, and Landing to the Martian surface are presented in this study.

Prabhakar Subrahmanyam↗
NASA NTRS2014

Mars Sample Return Using Commercial Capabilities: Propulsive Entry, Descent, and Landing of a Capsule Form Vehicle

This paper describes a critical portion of the work that has been done at NASA, Ames Research Center regarding the use of the commercially developed Dragon capsule as a delivery vehicle for the elements of a high priority Mars Sample Return mission. The objective of the investigation was to determine entry and landed mass capabilities that cover anticipated mission conditions. The "Red Dragon", Mars configuration, uses supersonic retro-propulsion, with no required parachute system, to perform Entry, Descent, and Landing (EDL) maneuvers. The propulsive system proposed for use is the same system that will perform an abort, if necessary, for a human rated version of the Dragon capsule. Standard trajectory analysis tools are applied to publically available information about Dragon and other legacy capsule forms in order to perform the investigation. Trajectory simulation parameters include entry velocity, flight path angle, lift to drag Ratio (L/D), landing site elevation, atmosphere density, and total entry mass, in addition engineering assumptions for the performance of the propulsion system are stated. Mass estimates for major elements of the overall proposed architecture are coupled to this EDL analysis to close the overall architecture. Three synodic launch opportunities, beginning with the 2022 opportunity, define the arrival conditions. Results state the relations between the analysis parameters as well as sensitivities to those parameters. The EDL performance envelope includes landing altitudes between 0 and -4 km referenced to the Mars Orbiter Laser Altimeter datum as well as minimum and maximum atmosphere density. Total entry masses between 7 and 10 mt are considered with architecture closure occurring between 9.0 and 10 mt. Propellant mass fractions for each major phase of the EDL - Entry, Terminal Descent, and Hazard Avoidance - have been derived. An assessment of the effect of the entry conditions on the Thermal Protection System (TPS) currently in use for Dragon missions shows no significant stressors. A useful payload mass of 2.0 mt is provided and includes mass and grow allowance for a Mars Ascent Vehicle (MAV), Earth Return Vehicle (ERV), and mission unique equipment. The useful payload supports an architecture that receives a sample from another surface asset and sends it directly back to Earth for recovery in a high Earth orbit. The work shows that emerging commercial capabilities as well as previously studied EDL methodologies can be used to efficiently support an important planetary science objective. The work also has applications for human exploration missions that will also use propulsive EDL techniques

EDL↗
NASA NTRS2013

Functional Equivalence Acceptance Testing of FUN3D for Entry Descent and Landing Applications

The functional equivalence of the unstructured grid code FUN3D to the the structured grid code LAURA (Langley Aerothermodynamic Upwind Relaxation Algorithm) is documented for applications of interest to the Entry, Descent, and Landing (EDL) community. Examples from an existing suite of regression tests are used to demonstrate the functional equivalence, encompassing various thermochemical models and vehicle configurations. Algorithm modifications required for the node-based unstructured grid code (FUN3D) to reproduce functionality of the cell-centered structured code (LAURA) are also documented. Challenges associated with computation on tetrahedral grids versus computation on structured-grid derived hexahedral systems are discussed.

Gnoffo, Peter A.↗
NASA NTRSDate not supplied

Entry, Descent, and Landing Simulation for DAVINCI

The Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging(DAVINCI) mission is currently scheduled to launch in June 2029 to explore Venus via two flybys and a probe descent scheduled for June 2031. The goals of this mission is to study the origin, evolution, and current state of Venus, especially the deep Venusian atmosphere using an atmospheric probe named Zephyr. The Zephyr will take key measurements in the deep atmosphere of Venus and be the first probe to take high-resolution aerial photographs of a mountainous tesserae surface as it descends over the Alpha Regio highlands region, which has the oldest surfaces of Venus. The Zephyr’s descent trajectory, which determines the flight over the Alpha Regio, is crucial to meet the science objectives of the DAVINCI mission. To ensure the success of the DAVINCI mission, the Entry, Descent, and Landing (EDL) modeling has undergone several developments to track its trajectory, its uncertainties, and calculate metrics on the science data that can be transmitted. This paper will cover these developments and the current status of the EDL modeling.

davinci↗
NASA NTRS2021

Mars 2020 Perseverance Entry Descent and Landing Guidance Navigation and Control

On February 18th, 2021, NASA landed Perseverance on the Jezero crater (Mars). This paper presents an overview of the Guidance, Navigation and Control (GNC) system for the Entry, Descent, and Landing (EDL) phases of the Mars 2020 Mission. It describes the GNC architecture, including sensors, actuators and algorithms. It takes the perspective of the GNC mode commander and shows its as-flown performance.

Brugarolas, Paul↗
NASA NTRS2005

Communications Blackout Predictions for Atmospheric Entry of Mars Science Laboratory

The Mars Science Laboratory (MSL) is expected to be a long-range, long-duration science laboratory rover on the Martian surface. MSL will provide a significant milestone that paves the way for future landed missions to Mars. NASA is studying options to launch MSL as early as 2009. There are three elements to the spacecraft; carrier (cruise stage), entry vehicle, and rover. The rover will have a UHF proximity link as the primary path for EDL communications and may have an X-band direct-to-Earth link as a back-up. Given the importance of collecting critical event telemetry data during atmospheric entry, it is important to understand the ability of a signal link to be maintained, especially during the period near peak convective heating. The received telemetry during entry (or played back later) will allow for the performance of the Entry-Descent-Landing technologies to be assessed. These technologies include guided entry for precision landing, a new sky-crane landing system and powered descent. MSL will undergo an entry profile that may result in a potential communications blackout caused by ionized particles for short periods near peak heating. The vehicle will use UHF and possibly X-band during the entry phase. The purpose of this rep0rt is to quantify or bound the likelihood of any such blackout at UHF frequencies (401 MHz) and X-band frequencies (8.4 GHz). Two entry trajectory scenarios were evaluated: a stressful entry trajectory to quantify an upper-bound for any possible blackout period, and a nominal trajectory to quantify likelihood of blackout for such cases.

communications↗
NASA NTRS1997

Model Correlation for Mars Pathfinder Entry, Descent and Landing Simulation

Two multi-body drop tests were conducted to provide data to calibrate and verify a multi-body dynamics computer model, which was the major analytical tool used to study the entry, descent and landing (EDL) of the Mars Pathfinder mission. A general summary of the tests and important features of the simulation model are presented in this paper. Good correlation between between test results and analytical predictions were achieved.

Mars↗
NASA NTRS2019

Orbiters, CubeSats, and radio telescopes, oh my; entry, descent, and landing communications for the 2018 InSight Mars lander mission

The Interior Exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) Mars lander mission was launched on May 5th, 2018 and its November 26, 2018 entry, descent, and landing sequence was observed by no less than five separate assets. The Mars Reconnaissance Orbiter (MRO) in orbit about Mars, the two Mars Cube One (MarCO) probes flying by, and two radio telescopes back on Earth were all used for this critical event communication coverage. These many paths of communication were enabled via the InSight launch/arrival strategy design, MRO orbital phasing selection, and MarCO trajectory design

Wagner, Sean↗
NASA NTRS2012

Mars Reconnaissance Orbiter Navigation Strategy for Mars Science Laboratory Entry, Descent and Landing Telecommunication Relay Support

The Mars Reconnaissance Orbiter (MRO) is an orbiting asset that performs remote sensing observations in order to characterize the surface, subsurface and atmosphere of Mars. To support upcoming NASA Mars Exploration Program Office objectives, MRO will be used as a relay communication link for the Mars Science Laboratory (MSL) mission during the MSL Entry, Descent and Landing sequence. To do so, MRO Navigation must synchronize the MRO Primary Science Orbit (PSO) with a set of target conditions requested by the MSL Navigation Team; this may be accomplished via propulsive maneuvers. This paper describes the MRO Navigation strategy for and operational performance of MSL EDL relay telecommunication support.

Mars Reconnaissance Orbiter (MRO)↗
NASA NTRS2020

Mid Lift-to-Drag Ratio Rigid Vehicle 6-DoF Performance for Human Mars Entry, Descent, and Landing: A Fractional Polynomial Powered Descent Guidance Approach

Defining a feasible vehicle design and mission architecture capable of reliably delivering apayload of 20 metric tons (mt) or more is a great challenge for landing humans on Mars. TheMid Lift-to-Drag Rigid Vehicle (MRV), a rigid decelerator studied in NASA’s Entry, Descent,and Landing Architecture Study (EDLAS), has shown to be a viable vehicle candidate forfuture human Mars missions. As the vehicle concept matures, models of increasing fidelity areadded to the six-degree-of-freedom (6DoF) EDL simulation. This paper presents 6DoFsimulation results using model updates for vehicle mass properties, fineness ratio, andaerodynamic-propulsive interactions. Additionally, an assessment of the Fractional-Polynomial Powered Descent Guidance (FP2DG) performance is presented, and the vehicleperformance is compared with the Tunable Apollo Powered Descent Guidance (TAPDG).Finally, Monte Carlo results of the vehicle design trades are presented.

Johnson, Breanna J.↗
NASA NTRS2021

Improvements to the Flight Analysis and Simulation Tool (FAST) and Initial Development of the Genesis Flight Mechanics Simulation for Ascent, Aerocapture, Entry, Descent, and Landing (A2EDL) Trajectory Design

The NASA Engineering and Safety Center (NESC) was requested to provide significant enhancements to the Flight Analysis and Simulation Tool (FAST), a generic, variable-degree-of-freedom, multi-body ascent, aerocapture, entry, descent, and landing (A2EDL) flight simulation code and a key Agency analysis tool. This report details the upgrades to FAST that were completed, describes a change to the assessment’s scope that allowed its goals to be exceeded with a new and innovative approach, and discusses the results of the modified approach.

NASA Engineering and Safety Center; Flight Analysi↗
NASA NTRS2006

Development of advanced entry, descent, and landing technologies for future Mars Missions

Future Mars missions may need the capability to land much closer to a desired target and/or advanced methods of detecting, avoiding, or tolerating landing hazards. Therefore, technologies that enable 'pinpoint landing' (within tens of meters to 1 km of a target site) will be crucial to meet future mission requirements. As part of NASA Research Announcement, NRA 03-OSS-01, NASA solicited proposals for technology development needs of missions to be launched to Mars during or after the 2009 launch opportunity. Six technology areas were identified as of high priority including advanced entry, descent, and landing (EDL) technologies. In May 2004, 11 proposals with PIs from universities, industries, and NASA centers, were awarded in the area of advanced EDL by NASA for further study and development. This paper presents an overview of these developing technologies.

NASA Research Announcement (NRA)↗
NASA NTRSDate not supplied

Scale-Resolving Simulations of a Supersonic Retro-Propulsion Concept For Mars Entry, Descent, and Landing

Supersonic retro-propulsion (SRP) is a deceleration technology that could enable largerpayloads and potentially humans to be brought from space to the surface of Mars safely.Accurate and reliable CFD predictions are needed to help design future Mars entry, descent,and landing (EDL) vehicles due to the cost and limitations of wind tunnel tests. TypicalCFD approaches struggle at points along the Mars EDL trajectory with high enough altitude(low enough ambient pressure) that the SRP motor plumes are over-expanded. This workdemonstrates how high-order scale-resolving simulations on Cartesian AMR grids can provideaccurate and reliable time-averaged aerodynamic loads on the vehicle for this challengingflow regime. Greater than second order convergence in the time-averaged integrated axialforce𝐶𝐴is obtained across the three finest mesh resolutions simulated, and the estimateduncertainty is smaller than the unsteady standard deviation – demonstrating the accuracy andreliability of the method. Although costly, this approach can yield higher confidence in𝐶𝐴thanpreviously obtained in a reasonable turnaround time and is within reach for a few points in thetrajectory (i.e. Mach 2.4, 2.52, and 2.78). Further computational performance and numericalmethods improvements are needed to reduce the cost enough to bring this method into the EDLengineering design cycle.

S&M↗
NASA NTRS2008

Overview of the Phoenix Entry, Descent and Landing System Architecture

NASA s Phoenix Mars Lander began its journey to Mars from Cape Canaveral, Florida in August 2007, but its journey to the launch pad began many years earlier in 1997 as NASA s Mars Surveyor Program 2001 Lander. In the intervening years, the entry, descent and landing (EDL) system architecture went through a series of changes, resulting in the system flown to the surface of Mars on May 25th, 2008. Some changes, such as entry velocity and landing site elevation, were the result of differences in mission design. Other changes, including the removal of hypersonic guidance, the reformulation of the parachute deployment algorithm, and the addition of the backshell avoidance maneuver, were driven by constant efforts to augment system robustness. An overview of the Phoenix EDL system architecture is presented along with rationales driving these architectural changes.

Grover, Myron R., III↗
NASA NTRSDate not supplied

Entry, Descent, and Landing GN&C System Evaluation via Cable-Driven Emulation Robotics

An innovative cable-driven parallel robot named the Six Degree-of-Freedom Tendon Actu- ated Robot (STAR), recently developed by researchers at NASA Johnson Space Center, was built to enable entry, descent, and landing (EDL) emulation experiments. Upon functional testing and system verification, STAR employed several simulated EDL trajectories to validate velocimeter LIDAR-based sensor models for cooperative terrain relative navigation applica- tions for its first testing campaign. The STAR lab also hosted researchers from Astrobotic to evaluate the real-time performance of a newly developed sensor payload, UltraNav, through hardware in-the-loop-testing (HWIL). This work introduces the STAR system along with its accompanying testing utilities and capabilities, and deliver the experimental methodology and results of test campaigns performed with the STAR facility to date.

navigation↗
NASA NTRS2017

Mars2020 Entry, Descent, and Landing Instrumentation 2 (MEDLI2) Do No Harm Test Series

A total of seventeen instrumented thermal sensor plugs, eight pressure transducers, two heat flux sensors, and one radiometer are planned to be utilized on the Mars 2020 missions thermal protection system (TPS) as part of the Mars Entry, Descent, and Landing Instrumentation II (MEDLI2) project. Of the MEDLI2 instrumentation, eleven instrumented thermal plugs and seven pressure transducers will be installed on the heatshield of the Mars 2020 vehicle while the rest will be installed on the backshell. The goal of the MEDLI2 instrumentation is to directly inform the large performance uncertainties that contribute to the design and validation of a Mars entry system. A better understanding of the entry environment and TPS performance could lead to reduced design margins enabling a greater payload mass-fraction and smaller landing ellipses. To prove that the MEDLI2 system will not degrade the performance of the Mars 2020 TPS, an Aerothermal Do No Harm (DNH) test series was designed and conducted. Like Mars 2020s predecessor, Mars Science Laboratory (MSL), the heatshield material will be Phenolic Impregnated Carbon Ablator (PICA); the Mars 2020 entry conditions are enveloped by the MSL design environments, therefore the development and qualification testing performed during MEDLI is sufficient to show that the similar MEDLI2 heatshield instrumentation will not degrade PICA performance. However, given that MEDLI did not include any backshell instrumentation, the MEDLI2 team was required to design and execute a DNH test series utilizing the backshell TPS material (SLA-561V) with the intended flight sensor suite. To meet the requirements handed down from Mars 2020, the MEDLI2 DNH test series emphasized the interaction between the MEDLI2 sensors and sensing locations with the surrounding backshell TPS and substrucutre. These interactions were characterized by performing environmental testing of four 12 by 12 test panels, which mimicked the construction of the backshell TPS and the integration of the MEDLI2 sensors as seen in Figure 1. The testing included thermal vacuumcycling, random vibration, shock, and arc jet testing. The test panels were fabricated by Lockheed Martin, establishing techniques that will be utilized during the Mars 2020 vehicle installation. Each test panel included one thermal sensor plug (two embedded thermocouples), one heat flux sensor, and multiple pressure port holes for evaluation.This presentation will discuss the planning and execution of the MEDLI2 DNH test series. Selected highlights and results of each environmental test will be presented, and lessons learned will be addressed that will feed forward into the planning for the MEDLI2 flight system certification testing.

backshell↗