Search NASA⌕ Search

SEARCH · Search NASA

Results for “Error Rate Predictions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Stardust-NExT, Deep Impact, and the Accelerating Spin of 9P/Tempel One

The evolution of the spin rate of comet 9P/Tempel 1 through two perihelion passages (CYs 2000 and 2005) is determined from 1922 Earth-based observations taken over a period of 13y as part of a World-Wide observing campaign and 2888 observations taken over a period of 50d from the Deep Impact spacecraft. We determine the following sidereal spin rates (periods): 209.023 +/- 0.025 degrees /day (41.335 +/- 0.005 h) prior to the 2000 perihelion passage, 210.448 +/- 0.016 degrees/day (41.055 +/- 0.003 h) for the interval between the 2000 and 2005 perihelion passages, 211.856 +/- 0.030 degrees/day (40.783 +/- 0.006 h) from Deep Impact photometry just prior to the 2005 perihelion passage, and 211.625 +/- 0.012 degrees /day (40.827 +/- 0.002 h) in the interval 2006-2010 following the 2005 perihelion passage. The period decreased by 16.8 +/- 0.3 min during the 2000 passage and by 13.7 +/- 0.2 min during the 2005 passage suggesting a secular decrease in the net torque. The change in spin rate is asymmetric with respect to perihelion with the maximum net torque being applied on approach to perihelion. The Deep Impact data alone show that the spin rate was increasing at a rate of 0.024 +/- 0.003 degree/d/d at JD2453530.60510 (i.e., 25.134 d before impact) and provides independent confirmation of the change seen in the Earth-based observations. The rotational phase of the nucleus at times before and after each perihelion and at the Deep Impact encounter is estimated based on the Thomas et al. pole and longitude system. The possibility of a 180 degree error in the rotational phase is assessed and found to be significant. Analytical and physical modeling of the behavior of the spin rate through of each perihelion is presented and used as a basis to predict the rotational state of the nucleus at the time of the nominal (i.e., prior to February 2010) Stardust-NExT encounter on 2011 February 14 20:42. We find that a net torque in the range of 0.3 - 2.5 x 10(exp 7) kg.square m2/square s acts on the nucleus during perihelion passage. The spin rate initially slows down on approach to perihelion and then passes through a minimum. It then accelerates rapidly as it passes through perihelion eventually reaching a maximum post-perihelion. It then decreases to a stable value as the nucleus moves away from the sun. We find that the pole direction is unlikely to precess by more than approximately 1 degree/perihelion passage. The trend of the period with time and the fact that the modeled peak torque that occurs before perihelion is in agreement with published accounts of trends in water production rate and suggests that widespread H2O out-gassing from the surface is largely responsible for the observed spin-up.

Belton, Michael J. S.↗
NASA NTRS2012

Indirect M-MRAC for Systems with Time Varying Parameters and Bounded Disturbances

The paper presents a prediction-identification model based adaptive control method for uncertain systems with time varying parameters in the presence of bounded external disturbances. The method guarantees desired tracking performance for the system s state and input signals. This is achieved by feeding back the state prediction error to the identification model. It is shown that the desired closed-loop properties are obtained with fast adaptation when the error feedback gain is selected proportional to the square root of the adaptation rate. The theoretical findings are confirmed via a simulation example.

Stepanyan, Vahram↗
NASA NTRS2011

Stardust-NExT, Deep Impact, and the Accelerating Spin of 9P/Tempel 1

The evolution of the spin rate of Comet 9P/Tempel 1 through two perihelion passages (in 2000 and 2005) is determined from 1922 Earth-based observations taken over a period of 13 year as part of a World-Wide observing campaign and from 2888 observations taken over a period of 50 days from the Deep Impact spacecraft. We determine the following sidereal spin rates (periods): 209.023 +/- 0.025deg/dy (41.335 0.005 h) prior to the 2000 perihelion passage, 210.448 +/- 0.016deg/dy (41.055 +/- 0.003 h) for the interval between the 2000 and 2005 perihelion passages, 211.856 +/- 0.030deg/dy (40.783 +/- 0.006 h) from Deep Impact photometry just prior to the 2005 perihelion passage, and 211.625 +/- 0.012deg/dy (40.827 +/- 0.002 h) in the interval 2006-2010 following the 2005 perihelion passage. The period decreased by 16.8 +/- 0.3 min during the 2000 passage and by 13.7 +/- 0.2 min during the 2005 passage suggesting a secular decrease in the net torque. The change in spin rate is asymmetric with respect to perihelion with the maximum net torque being applied on approach to perihelion. The Deep Impact data alone show that the spin rate was increasing at a rate of 0.024 +/- 0.003deg/dy/dy at JD2453530.60510 (i.e., 25.134 dy before impact), which provides independent confirmation of the change seen in the Earth-based observations. The rotational phase of the nucleus at times before and after each perihelion and at the Deep Impact encounter is estimated based on the Thomas et al. (Thomas et al. [2007]. Icarus 187, 4-15) pole and longitude system. The possibility of a 180deg error in the rotational phase is assessed and found to be significant. Analytical and physical modeling of the behavior of the spin rate through of each perihelion is presented and used as a basis to predict the rotational state of the nucleus at the time of the nominal (i.e., prior to February 2010) Stardust-NExT encounter on 2011 February 14 at 20:42. We find that a net torque in the range of 0.3-2.5 x 10(exp 7) kg/sq m/sq s acts on the nucleus during perihelion passage. The spin rate initially slows down on approach to perihelion and then passes through a minimum. It then accelerates rapidly as it passes through perihelion eventually reaching a maximum post-perihelion. It then decreases to a stable value as the nucleus moves away from the Sun. We find that the pole direction is unlikely to precess by more than approx. 1deg per perihelion passage. The trend of the period with time and the fact that the modeled peak torque occurs before perihelion are in agreement with published accounts of trends in water production rate and suggests that widespread H2O out-gassing from the surface is largely responsible for the observed spin-up.

Belton, Michael J. S.↗
NASA NTRS2018

Verification of Real-Time WSA-ENLIL+Cone Simulations of CME Arrival-Time at the CCMC from 2010 to 2016

The Wang-Sheeley-Arge (WSA)-ENLIL+Cone model is used extensively in space weather operations world-wide to model coronal mass ejection (CME) propagation. As such, it is important to assess its performance. We present validation results of the WSA-ENLIL+Cone model installed at the Community Coordinated Modeling Center (CCMC) and executed in real-time by the CCMC space weather team. CCMC uses the WSA-ENLIL+Cone model to predict CME arrivals at NASA missions throughout the inner heliosphere. In this work we compare model predicted CME arrival-times to in situ interplanetary coronal mass ejection leading edge measurements at Solar TErrestrial RElations Observatory-Ahead (STEREO-A), Solar TErrestrial RElations Observatory-Behind (STEREO-B), and Earth (Wind and ACE) for simulations completed between March 2010 and December 2016 (over 1,800 CMEs). We report hit, miss, false alarm, and correct rejection statistics for all three locations. For all predicted CME arrivals, the hit rate is 0.5, and the false alarm rate is 0.1. For the 273 events where the CME was predicted to arrive at Earth, STEREO-A, or STEREO-B, and was actually observed (hit event), the mean absolute arrival-time prediction error was 10.4 +/- 0.9 h, with a tendency to early prediction error of -4.0 h. We show the dependence of the arrival-time error on CME input parameters. We also explore the impact of the multi-spacecraft observations used to initialize the model CME inputs by comparing model verification results before and after the STEREO-B communication loss (since September 2014) and STEREO-A sidelobe operations (August 2014- December 2015). There is an increase of 1.7 h in the CME arrival time error during single, or limited two-viewpoint periods, compared to the three-spacecraft viewpoint period. This trend would apply to a future space weather mission at L5 or L4 as another coronagraph viewpoint to reduce CME arrival time errors compared to a single L1 viewpoint.

MHD / modeling / validation / forecasting / corona↗
NASA NTRS1984

An attitude reorientation algorithm for the Galileo spacecraft

This paper presents an onboard closed loop attitude reorientation algorithm for a dual-spin spacecraft, Galileo. The basic concept for the design uses the despun stator as a reference and fires a sequence of fixed duration thruster pulses to precess the angular momentum vector to its commanded orientation. The error signals used to despin the stator and to perform the turn are derived from the stator error quaternion which is computed using gyro outputs. Constraints considered in the design include gyro rate saturation, plume impingement effects, system parameter variations, as well as software reliability and flexibility. The performance of the algorithm was predicted by analysis and confirmed by computer simulation results. It was concluded that a reorientation accuracy of better than 1 milliradian with a nutation angle of less than 1 degree during the turn can be achieved.

Lin, H.-S.↗
NASA NTRS1992

A recent Cleanroom success story: The Redwing project

Redwing is the largest completed Cleanroom software engineering project in IBM, both in terms of lines of code and project staffing. The product provides a decision-support facility that utilizes artificial intelligence (AI) technology for predicting and preventing complex operating problems in an MVS environment. The project used the Cleanroom process for development and realized a defect rate of 2.6 errors/KLOC, measured from first execution. This represents the total amount of errors that were found in testing and installation at three field test sites. Development productivity was 486 LOC/PM, which included all development labor expended in design specification through completion of incremental testing. In short, the Redwing team produced a complex systems software product with an extraordinarily low error rate, while maintaining high productivity. All of this was accomplished by a project team using Cleanroom for the first time. An 'introductory implementation' of Cleanroom was defined and used on Redwing. This paper describes the quality and productivity results, the Redwing project, and how Cleanroom was implemented.

Hausler, Philip A.↗
NASA NTRS2015

A Metric to Quantify Shared Visual Attention in Two-Person Teams

Introduction: Critical tasks in high-risk environments are often performed by teams, the members of which must work together efficiently. In some situations, the team members may have to work together to solve a particular problem, while in others it may be better for them to divide the work into separate tasks that can be completed in parallel. We hypothesize that these two team strategies can be differentiated on the basis of shared visual attention, measured by gaze tracking. 2) Methods: Gaze recordings were obtained for two-person flight crews flying a high-fidelity simulator (Gontar, Hoermann, 2014). Gaze was categorized with respect to 12 areas of interest (AOIs). We used these data to construct time series of 12 dimensional vectors, with each vector component representing one of the AOIs. At each time step, each vector component was set to 0, except for the one corresponding to the currently fixated AOI, which was set to 1. This time series could then be averaged in time, with the averaging window time (t) as a variable parameter. For example, when we average with a t of one minute, each vector component represents the proportion of time that the corresponding AOI was fixated within the corresponding one minute interval. We then computed the Pearson product-moment correlation coefficient between the gaze proportion vectors for each of the two crew members, at each point in time, resulting in a signal representing the time-varying correlation between gaze behaviors. We determined criteria for concluding correlated gaze behavior using two methods: first, a permutation test was applied to the subjects' data. When one crew member's gaze proportion vector is correlated with a random time sample from the other crewmember's data, a distribution of correlation values is obtained that differs markedly from the distribution obtained from temporally aligned samples. In addition to validating that the gaze tracker was functioning reasonably well, this also allows us to compute probabilities of coordinated behavior for each value of the correlation. As an alternative, we also tabulated distributions of correlation coefficients for synthetic data sets, in which the behavior was modeled as a first-order Markov process, and compared correlation distributions for identical processes with those for disparate processes, allowing us to choose criteria and estimate error rates. 3) Discussion: Our method of gaze correlation is able to measure shared visual attention, and can distinguish between activities involving different instruments. We plan to analyze whether pilots strategies of sharing visual attention can predict performance. Possible measurements of performance include expert ratings from instructors, fuel consumption, total task time, and failure rate. While developed for two-person crews, our approach can be applied to larger groups, using intra-class correlation coefficients instead of the Pearson product-moment correlation.

Gontar, Patrick↗
NASA NTRS1975

Intumescent coating modeling

A thermal response mathematical model for an intumescent coating system is developed. The model predicts indepth temperature profiles of the solid as a function of the fundamental kinetic, mass, and heat-transfer properties of the original coating system. In the model, swelling is based on an empirical function of the paint's weight loss. The model is used to describe the effectiveness of the coating for thermal protection. Using the thermal response time at the backface of the material as a criterion, a sensitivity analysis is made with respect to variation in individual properties, such as total expansion, to provide a guide for designing improved intumescing agents. The sensitivity analysis shows that total expansion and rate of expansion, along with other material properties, are important parameters for providing thermal protection. Finally, backface temperature histories are predicted and compared to experimental data obtained from a representative fire environment. Predicted temperatures agree within a maximum error of plus or minus 20%.

Cagliostro, D. E.↗
NASA NTRS2003

Upper bounds to error probabilities of coded systems beyond the cutoff rate

A family of upper bounds to error probabilities of coded systems was recently proposed by Divsalar. These bounds are valid for transmission over the additive white Gaussian noise channel, and require only the knowledge of the weight spectrum of the code words. After illustrating these bounds, we extend them to fading channels. Contrary to the union bound, our bounds maintain their effectiveness below the signal-to-noise ratio (SNR)at which the cutoff rate of the channel equals the rate of the code. Some applications are shown. First, we derive upper bounds to the minimum SNR necessary to achieve zero error probability as the code block length increases to infinity. Next, we use our bounds to predict the performance of turbo codes and low-density parity-check codes.

Biglieri, Ezio↗
NASA NTRS2021

Chapter 5: Extravehicular Activity Metabolic Rate Model: Metabolic Rate Estimated from Heart Rate

In-flight monitoring of crew metabolic rates during extravehicular activity (EVA) provides crucial information in mitigating injury. The purpose of this study was to investigate the relationship of crewmember heart rate (HR) and metabolic rate (MR) during EVA operations to develop a predictive linear model. HR and MR data was collected from 132 EVAs from Shuttle and International Space Station (ISS) missions. MR was collected every 2-min from portable life support system delta oxygen decay, while HR was collected every 20-sec via electrocardiogram. HR was down sampled to every 2-min to match MR during EVA for evaluation. Further, a new metric was observed from direct relations between metabolic rate with HR over EVA time (MR/HR) measured as a BTU/beat. A range of BTU/beat was collected as a conversion scale between MR and HR at different EVA workloads categorized by increased MR. Both HR and MR values were observed to decrease through the duration of EVA. Similarly, HR and MR slopes decreased at start of EVA compared to end of EVA. MR/HR values were used to predict MR from HR over the entire duration of EVA with root mean square error less than 200 BTU/Hr. Additionally, MR was predicted based on HR values during EVA via a calculated simple linear regression. A regression equation was found for each EVA drawing relations between HR and MR (F (2923.84) and P<0.0001) with an R(sup 2) value of 0.402. Individual crew regressions improved prediction and R(sup 2) to greater than 0.82. Two models are presented to determine metabolic rate from heart rate during EVA. Results draw correlations for heart rate and metabolic rate fluctuations during EVA for individualized crew predictions during future operations. The linear models correlate to Apollo prediction data during historic EVAs.

Metabolic rate predictions↗
NASA NTRS1977

Prediction of pilot reserve attention capacity during air-to-air target tracking

Reserve attention capacity of a pilot was calculated using a pilot model that allocates exclusive model attention according to the ranking of task urgency functions whose variables are tracking error and error rate. The modeled task consisted of tracking a maneuvering target aircraft both vertically and horizontally, and when possible, performing a diverting side task which was simulated by the precise positioning of an electrical stylus and modeled as a task of constant urgency in the attention allocation algorithm. The urgency of the single loop vertical task is simply the magnitude of the vertical tracking error, while the multiloop horizontal task requires a nonlinear urgency measure of error and error rate terms. Comparison of model results with flight simulation data verified the computed model statistics of tracking error of both axes, lateral and longitudinal stick amplitude and rate, and side task episodes. Full data for the simulation tracking statistics as well as the explicit equations and structure of the urgency function multiaxis pilot model are presented.

Onstott, E. D.↗
NASA NTRS1984

Aircraft automation - The problem of the pilot interface

In recent years, aviation has been experiencing a rapid growth. This growth is expected to continue, and aircraft operations in the IFR (instrument flight rules) environment, for example, are predicted to increase dramatically in the next 10 to 12 years. However, it has been found the IFR accidents are increasing at about the same rate as IFR operations, because an associated high workload can lead to human error. For this reason, NASA and others are exploring the use of aircraft systems technology as a means for reducing the pilot workload and enhancing the safety and utility of the aircraft operations. However, recent research has shown that automation, implemented with insufficient consideration to the human factors interface, can frequently create more problems than it solves. Some of this research is discussed, examples of the encountered problems are shown, and solutions regarding the arising problems are suggested.

Bergeron, H. P.↗
NASA NTRS1993

Aeronautical audio broadcasting via satellite

A system design for aeronautical audio broadcasting, with C-band uplink and L-band downlink, via Inmarsat space segments is presented. Near-transparent-quality compression of 5-kHz bandwidth audio at 20.5 kbit/s is achieved based on a hybrid technique employing linear predictive modeling and transform-domain residual quantization. Concatenated Reed-Solomon/convolutional codes with quadrature phase shift keying are selected for bandwidth and power efficiency. RF bandwidth at 25 kHz per channel, and a decoded bit error rate at 10(exp -6) with E(sub b)/N(sub o) at 3.75 dB are obtained. An interleaver, scrambler, modem synchronization, and frame format were designed, and frequency-division multiple access was selected over code-division multiple access. A link budget computation based on a worst-case scenario indicates sufficient system power margins. Transponder occupancy analysis for 72 audio channels demonstrates ample remaining capacity to accommodate emerging aeronautical services.

Tzeng, Forrest F.↗
NASA NTRS2001

Accurate Time-Dependent Traveling-Wave Tube Model Developed for Computational Bit-Error-Rate Testing

The phenomenal growth of the satellite communications industry has created a large demand for traveling-wave tubes (TWT's) operating with unprecedented specifications requiring the design and production of many novel devices in record time. To achieve this, the TWT industry heavily relies on computational modeling. However, the TWT industry's computational modeling capabilities need to be improved because there are often discrepancies between measured TWT data and that predicted by conventional two-dimensional helical TWT interaction codes. This limits the analysis and design of novel devices or TWT's with parameters differing from what is conventionally manufactured. In addition, the inaccuracy of current computational tools limits achievable TWT performance because optimized designs require highly accurate models. To address these concerns, a fully three-dimensional, time-dependent, helical TWT interaction model was developed using the electromagnetic particle-in-cell code MAFIA (Solution of MAxwell's equations by the Finite-Integration-Algorithm). The model includes a short section of helical slow-wave circuit with excitation fed by radiofrequency input/output couplers, and an electron beam contained by periodic permanent magnet focusing. A cutaway view of several turns of the three-dimensional helical slow-wave circuit with input/output couplers is shown. This has been shown to be more accurate than conventionally used two-dimensional models. The growth of the communications industry has also imposed a demand for increased data rates for the transmission of large volumes of data. To achieve increased data rates, complex modulation and multiple access techniques are employed requiring minimum distortion of the signal as it is passed through the TWT. Thus, intersymbol interference (ISI) becomes a major consideration, as well as suspected causes such as reflections within the TWT. To experimentally investigate effects of the physical TWT on ISI would be prohibitively expensive, as it would require manufacturing numerous amplifiers, in addition to acquiring the required digital hardware. As an alternative, the time-domain TWT interaction model developed here provides the capability to establish a computational test bench where ISI or bit error rate can be simulated as a function of TWT operating parameters and component geometries. Intermodulation products, harmonic generation, and backward waves can also be monitored with the model for similar correlations. The advancements in computational capabilities and corresponding potential improvements in TWT performance may prove to be the enabling technologies for realizing unprecedented data rates for near real time transmission of the increasingly larger volumes of data demanded by planned commercial and Government satellite communications applications. This work is in support of the Cross Enterprise Technology Development Program in Headquarters' Advanced Technology & Mission Studies Division and the Air Force Office of Scientific Research Small Business Technology Transfer programs.

Kory, Carol L.↗
NASA NTRS1999

Secondary Forest Age and Tropical Forest Biomass Estimation Using TM

The age of secondary forests in the Amazon will become more critical with respect to the estimation of biomass and carbon budgets as tropical forest conversion continues. Multitemporal Thematic Mapper data were used to develop land cover histories for a 33,000 Square kM area near Ariquemes, Rondonia over a 7 year period from 1989-1995. The age of the secondary forest, a surrogate for the amount of biomass (or carbon) stored above-ground, was found to be unimportant in terms of biomass budget error rates in a forested TM scene which had undergone a 20% conversion to nonforest/agricultural cover types. In such a situation, the 80% of the scene still covered by primary forest accounted for over 98% of the scene biomass. The difference between secondary forest biomass estimates developed with and without age information were inconsequential relative to the estimate of biomass for the entire scene. However, in futuristic scenarios where all of the primary forest has been converted to agriculture and secondary forest (55% and 42% respectively), the ability to age secondary forest becomes critical. Depending on biomass accumulation rate assumptions, scene biomass budget errors on the order of -10% to +30% are likely if the age of the secondary forests are not taken into account. Single-date TM imagery cannot be used to accurately age secondary forests into single-year classes. A neural network utilizing TM band 2 and three TM spectral-texture measures (bands 3 and 5) predicted secondary forest age over a range of 0-7 years with an RMSE of 1.59 years and an R(Squared) (sub actual vs predicted) = 0.37. A proposal is made, based on a literature review, to use satellite imagery to identify general secondary forest age groups which, within group, exhibit relatively constant biomass accumulation rates.

Nelson, R. F.↗
NASA NTRS1980

The influence of orbit selection on the accuracy of the Stanford Relativity gyroscope experiment

This paper discusses an error analysis for the Stanford Relativity experiment, designed to measure the precession of a gyroscope's spin-axis predicted by general relativity. Measurements will be made of the spin-axis orientations of 4 superconducting spherical gyroscopes carried by an earth-satellite. Two relativistic precessions are predicted: a 'geodetic' precession associated with the satellite's orbital motion and a 'motional' precession due to the earth's rotation. Using a Kalman filter covariance analysis with a realistic error model we have computed the error in determining the relativistic precession rates. Studies show that a slightly off-polar orbit is better than a polar orbit for determining the 'motional' drift.

Vassar, R.↗
NASA NTRS1996

Ocean observations with EOS/MODIS: Algorithm development and post launch studies

Several significant accomplishments were made during the present reporting period. We have completed our basic study of using the 1.38 micron MODIS band for removal of the effects of thin cirrus clouds and stratospheric aerosol. The results suggest that it should be possible to correct imagery for thin cirrus clouds with optical thicknesses as large as 0.5 to 1.0. We have also acquired reflectance data for oceanic whitecaps during a cruise on the RV Malcolm Baldrige in the Gulf of Mexico. The reflectance spectrum of whitecaps was found to be similar to that for breaking waves in the surf zone measured by Frouin, Schwindling and Deschamps. We installed a CIMEL sun photometer at Fort Jefferson on the Dry Tortugas off Key West in the Gulf of Mexico. The instrument has yielded a continuous stream of data since February. It shows that the aerosol optical thickness at 669 nm is often less than 0.1 in winter. This suggests that the Southern Gulf of Mexico will be an excellent winter site for vicarious calibration. In addition, we completed a study of the effect of vicarious calibration, i.e., the accuracy with which the radiance at the top of the atmosphere (TOA) can be predicted from measurement of the sky radiance at the bottom of the atmosphere (BOA). The results suggest that the neglect of polarization in the aerosol optical property inversion algorithm and in the prediction code for the TOA radiances is the largest error associated with the radiative transfer process. Overall, the study showed that the accuracy of the TOA radiance prediction is now limited by the racliometric calibration error in the sky radiometer. Finally, considerable coccolith light scattering data were obtained in the Gulf of Maine with a flow-through instrument, along with data relating to calcite concentration and the rate of calcite production.

Gordan, Howard R.↗