Search NASA⌕ Search

SEARCH · Search NASA

Results for “Europa”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Initial Navigation Analysis for the Europa Multiple Flyby Mission Concept

Earth and spacecraft-based observations of the Jovian moon Europa have identified it as the most plausible habitat for extraterrestrial life in our solar system. Recently, NASA has formed a Europa Mission Concept to potentially explore this icy world with a sophisticated instrument suite operating from a spacecraft in orbit about Jupiter. Candidate trajectories have been designed that would use the Jovian moons to repeatedly bring the spacecraft near Europa, providing multiple observation opportunities over the mission duration. This paper describes navigation analyses associated with these trajectories that are being assessed for their operational feasibility. The analysis includes determination of the ΔV requirements for the mission concept and notional spacecraft ephemeris knowledge capability.

Nandi, Sumita↗
NASA NTRS2016

Trajectories for Europa Flyby Sample Return

Ballistic trajectories are computed which would enable a sample return mission to Europa without capturing, descending, or landing. The low-cost mission concept utilizes a free return trajectory that also involves a close flyby of Europa. Near Europa, a small impactor would kinetically impact the icy moon and generate a plume, subsequently sampled by the spacecraft. A broad search algorithm is developed to construct feasible itineraries, which considers Venus and Earth gravity assist sequences. High-quality solutions are then differentially corrected to be continuous using high-fidelity dynamics. The complete methodology is applicable to other outer-planet moons, notably Enceladus. The outbound VEEGA option is found to signifcantly reduce launch C3 compared to alternate options. The characteristics and quality of the solutions exhibit substantial variation over the 12-year period of Jupiter. Nevertheless, a variety of optimized results are computed with C3 as low as 16.0 sq.km/sq.sec, re-entry speed well below that of the Stardust capsule, and flight times of 9 to 15 years.

Jones, Drew Ryan↗
NASA NTRS2017

The Intelligent Landing System for Safe and Precise Landing on Europa

Europa, the smallest of Jupiter’s Galilean moons, is thought to harbor a vast liquid water ocean beneath its icy crust, making it one of the most scientifically intriguing targets for a robotic surface sampling mission in our Solar System. However, autonomously landing a spacecraft safely and precisely on Europa poses unique challenges, such as very little existing high-resolution reconnaissance imagery, a surface expected to be very rough and hazardous over a wide range of scales, an extremely intense ionizing radiation environment, and very limited lander resources for mass and volume. To address these challenges, we propose a novel Intelligent Landing System (ILS) combining four Guidance, Navigation & Control (GN&C) sensing functions – velocimetry, altimetry, map-relative localization, and hazard detection – that would together enable safe and precise landing on Europa’s surface. The ILS is a smart sensor system, combining an inertial measurement unit (IMU), a monocular, passive-optical camera, and a light detection and ranging (Li-DAR) sensor with dedicated computing resources as well as an onboard 3D terrain map. The ILS leverages more than a decade of technology development from programs such as the Lander Vision System, currently baselined on the Mars 2020 mission. This paper provides a detailed description of the proposed ILS architecture and concept of operations, as well as select preliminary simulation results to assess performance and robustness.

Trawny, Nikolas↗
NASA NTRS2019

A Measurement of Water Vapour amid a Largely Quiescent Environment on Europa

Previous investigations proved the existence of local density enhancements in Europa’s atmosphere, advancing the idea of a possible origination from water plumes. These measurement strategies, however, were sensitive either to total absorption or atomic emissions, which limited the ability to assess the water content. Here we present direct searches for water vapour on Europa spanning dates from February 2016 to May 2017 with the Keck Observatory. Our global survey at infrared wavelengths resulted in non-detections on 16 out of 17 dates, with upper limits below the water abundances inferred from previous estimates. On one date (26 April 2016) we measured 2,095 ± 658 tonnes of water vapour at Europa’s leading hemisphere. We suggest that the outgassing ls than previously estimated, with only rare localized events of stronger activity.

Paganini, L.↗
NASA NTRS2018

Is MBSE Helping? Measuring Value on Europa Clipper

JPL’s Integrated Model Centric Engineering Initiative (IMCE) has led the infusion of MBSE at JPL. In 2009 I authored for IMCE a set of challenges that confronted systems engineering at JPL, based on examination of issues and lessons from several recent projects (the “Five System Engineering Challenges”). In 2012 I augmented this work to describe specific areas where it appeared MBSE could help address these challenges. Around the same time, the Europa Clipper Mission became the first project at JPL to attempt, in close collaboration with IMCE, a widespread adoption of MBSE. This adoption has been highly successful so far. Europa Clipper completed Phase A (Formulation) with a successful System Requirements Review / Mission Definition Review, and is nearing the end of Phase B, with a successful Flight System Preliminary Design Review in October 2017. This is an opportune time to take stock of the progress and the work yet to go. This paper proposes a practical method for measuring value added through use of MBSE, applies this method to the Europa Clipper Project, and suggests how it might be applied to other projects and organizations.

Bayer, Todd↗
NASA NTRS2018

Improving Spacecraft Design and Operability for Europa Clipper through High-Fidelity, Mission-Level Modeling and Simulation

NASA’s planned Europa Clipper mission seeks to assess the habitability of Jupiter’s moon Europa, which exhibits strong evidence of an ocean of liquid water underneath its icy crust. The sheer number of unique instruments, all of which require quiescent environments in order to operate, compounded with Jupiter’s distance from the Sun and Earth, make this planned mission challenging and resource-constrained. High fidelity, mission-level simulations that model the spacecraft, ground, and environment from launch to end-of-mission with a given trajectory and mission plan have been employed early in the project lifecycle to better understand the interactions between various components of the mission and how design changes impact the entire system. These simulations have already resulted in tangible benefits to the project by providing vital input to key spacecraft trades, assessing impacts to operability, and quantifying how well the scientific objectives of the mission can be achieved. Improvements to simulation performance and to the process by which information defining the system is gathered and built into models used by simulations have the potential to further expand the scope of their use on Europa Clipper and future missions.

Lawler, C.R.↗
NASA NTRS2018

Europa Clipper Thermal Control Design

This paper details the design developments of the Europa Clipper spacecraft thermal control system and its primary element the Heat Redistribution System (HRS). The Europa Clipper spacecraft will launch in the early 2020s and will have multiple flybys of Jupiter’s icy moon, Europa. The HRS, which utilizes a Mechanically Pumped Fluid Loop (MPFL) to reclaim waste heat from an avionics vault module and redistribute it to the propulsion module and radiator, has become an integral part of the spacecraft architecture both in terms of mechanical configuration and spacecraft operations capability. A walkthrough on the planned implementation of the HRS on the primary spacecraft modules is provided along with a description on thermal control of spacecraft hardware not located on the HRS vault, where thermal isolation and tolerance to extreme thermal environment drives the hardware designs.

Bhandari, Pradeep↗
NASA NTRS2018

A Hazard Detection Sensor for Landing on Europa

Based on the limited imagery available, the surface topography of Jupiter’s icy moon Europa is expected to be hazardous for robotic landers. The Europa Lander Concept Pre-Project Team has therefore concluded that onboard hazard detection (and avoidance) using an imaging light detection and ranging (lidar) system is an enabling technology. In this paper we describe the challenges, requirements, technical solution space, and our maturation strategy to advance lidar technology for a Europa Lander mission concept to TRL 6 by 2021. JPL is confident that the resulting technology will be of value to a wide range of lunar and planetary landing missions.

Katake, Anup↗
NASA NTRS2019

Global search of resonant trasfers for a Europa Lander to Clipper data relay

Following its prime mission Europa Clipper becomes a potential asset to relay data from a proposed Europa Lander back to Earth. To this end, we describe an efficient method to globally search for trajectories that repeatedly fly over the same location of Europa. Different families of trajectories emerge with different flyby geometries that satisfy a convoluted set of landing constraints. Here, the landing location and local solar time must match a limited set derived from expected Clipper observations, while providing multiple opportunities to land in a given season. We include estimates for data volume and radiation dose associated with these resonant trajectories.

Campagnola, Stefano↗
NASA NTRS2019

Mechanical design and stress analysis challenges overcome to ensure the structural integrity of Europa Clipper's mechanical pumped fluid loop Heat Redistribution System (HRS)

Launching in 2023, NASA’s Europa Clipper mission will place a spacecraft into a long, looping orbit around Jupiter to perform a series of close flyby investigations of its moon Europa. Strong evidence suggests that Europa hosts an ocean of liquid water beneath its icy crust that could harbor conditions favorable for life. The spacecraft is currently under development by the Jet Propulsion Laboratory (JPL) and the Applied Physics Laboratory (APL) and nearing completion of its Detailed Design Phase. A Mechanical Pumped Fluid Loop (MPFL) architecture known as the Heat Redistribution System (HRS) has been baselined to provide power efficient thermal control of the sensitive components within the Avionics, Radio Frequency (RF), and Propulsion Modules. Principally, the HRS harvests waste heat from the onboard dissipating equipment and distributes it to a 1.4 m diameter by 3 m tall cylindrical structure that cocoons and keeps the propulsion subsystem warm. Numerous technical issues had to be resolved in order to securely attach nearly 100 m of HRS tubing to the spacecraft, which is predicted to experience high launch loads. This paper will review the relevant environments and mission constraints as well as outline the stress and fatigue analysis approach taken to verify the detailed mechanical design of the HRS.

Kolenz, Daniel↗
NASA NTRS2019

Thermal control technologies for Europa Clipper mission

The Europa Clipper Mission to Europa, a moon of Jupiter, is planned for a launch in 2023. Since Europa is at a large distance (5.6 A.U.) from the Sun, the solar flux is less than 4% of that at Earth. This requires very large solar arrays to meet the power demands of a typical new mission concept. Hence, conservation of power for use in thermal control is extremely important. To achieve this goal a mechanically pumped fluid loop heat rejection system (HRS) is utilized to harvest waste heat from the spacecraft components. In addition to this, several thermal control technologies are employed. They include a high performance dual Multi-Layer Insulation (MLI) blanket design to minimize the large majority of heat loss from the spacecraft; two passive thermal control valves in series to greatly reduce the heat loss from the HRS to its radiator; and a low temperature louver to further reduce the loss from the radiator. This paper will describe these technologies, schemes for their implementation, and results of development tests to validate their performance.

Duran, Mark↗
NASA NTRS2021

An evaluation of the CAN bus for use on the Europa Lander motor controller

This paper will present the application of the Controller Area Network (CAN) for communication between the Motor Control Processor and the Europa Lander Motor Control Cards. The Europa Lander preproject team is concerned about lowering the estimated mass, volume, and power of the mission concept so that it could maximize its science return. The motor controller uses multiple Motor Control Cards to control the 24 motors that will be operating in the extremes of the Europa environment. The CAN bus was considered because of its multi-drop nature, low power interface, and simple communication protocol.

Lias, Malcolm↗
NASA NTRS2019

Europa lander mission concept power architecture

The Europa Lander mission concept team seeks to optimize a power system architecture to search for evidence of life on the surface of Europa, an icy moon of Jupiter. Environmental and mission challenges included radiation, extreme low temperatures, planetary protection, mission duration, and the limitations of the launch vehicle. Leveraging heritage from NASA’s Europa Clipper mission, the baseline architecture is highly reliable, capable of meeting all science objectives, and comprises of three vehicles: a solar powered carrier stage, a secondary battery powered descent vehicle, and a primary battery powered lander.

Carr, Gregory↗
NASA NTRS2019

ARIEL: Autonomous Excavation Site Selection for Europa Lander Mission Concept

This paper presents ARIEL (Autonomous Ranking and Interrogation of Excavation Location), an autonomy system for selecting an excavation site on-board for NASA’s Europa Lander Mission Concept. Historically, excavation site selection has been performed by a lengthy ground-in-the-loop (GITL) process involving manual inspections, assessments, and decision making in past missions. However, as Europa Lander would have approximately 20 days of lifetime after the landing, many surface activities, including excavation site selection, must be autonomously performed on-board. This paper describes the overall system of ARIEL as well as its two major algorithmic components: vision-based candidate selection and smart interrogation, which estimates the physical properties of the icy surface through physical contact with the robotic arm’s endeffector. Preliminary results are presented using images from Earth analogue sites. The Europa Lander mission returned to the formulation phases in early 2019 while ARIEL was at an early stage of development. Described in this paper is a snapshot of ARIEL as of the project suspension. This paper also describes the remaining challenges to be solved, should the mission resume in the future.

Ono, Hiro↗
NASA NTRS2020

Innovative Thermal Management & Control to Surmount Challenges of Exploring Ocean Worlds on Europa and Enceladus

Probes to penetrate the thick ice shells of our solar system’s Ocean Worlds have been studied for nearly 20 years, since scientific evidence strongly suggested a subsurface ocean on the Jupiter moon called Europa. There is keen scientific interest in exploring four significant themes on such proposed missions: 1) Geodynamics, 2) Geochemistry, 3) Habitability, and 4) Life Detection. The ice shells of Ocean Worlds are predicted to be up to 40 km thick; they exhibit extreme thermal environments, with ice temperatures from 100 K to 270 K, and extreme pressure environments from vacuum to 53 MPa. Jet Propulsion Laboratory has conducted a broad-look investigation of proposed mission concepts to Europa to identify the significant technology and operational challenges of Europa ice-penetration. The thermal-mechanical system (TMS) of an ice penetration probe (IPP) designed to access the ocean of an icy moon using radioisotope thermoelectric generators for heat and power faces technological hurdles exacerbated by severe thermal and volume constraints. This study identified thermal management and control (TMC) challenges that are strongly linked to: ice penetration start-up, mobility and navigation in the ice, communications while in the ice sheet, and detecting and avoiding in-ice hazards. The major objectives of the TMC system are: 1) Absorb internal thermal energy from the IPP radioisotope power source, 2) Maintain liquid water conditions around the IPP at all times, 3) Manage and control thermal flows from probe nose to tail, and 4) Provide pressure containment for all internal probe components. This work discusses the baseline TMC system architecture and design developed to accomplish these objectives, and survive and transit the extreme ice thicknesses in pursuit of Icy/Ocean Worlds science goals. The proposed TMC system consisting of an internal pumped two-phase fluid loop “thermal bus” for thermal energy capture, variable conductance heat pipe system for passively adaptive thermal energy transport around the probe, and water jetting system for ice cutting is described and discussed. Critical testing performed to date is described.

Lee, Kuan-Lin↗
NASA NTRS2021

An Evaluation of the CAN bus for Use on the Europa Lander Motor Controller

This paper will present the application of the Controller Area Network (CAN) for communication between the Motor Control Processor and the Europa Lander Motor Control Cards. The Europa Lander mission is concerned about lowering the mass, volume, and power so that it can maximize its science return. The motor controller uses multiple Motor Control Cards to control the 24 motors that will be operating in the extremes of the Europa environment. The CAN bus was considered because of its multi-drop nature, low power interface, and simple communication protocol. Beyond communication with the motor controller cards we also use the CAN bus interface to gather telemetry from the Power Conversion Card. Our system requires the collection of telemetry at a rate of 64Hz from the Power Conversion Card and all active motor controllers along with the sending of control packets and the receipt of control parameters at 512 Hz. In the paper we will address the ability of the CAN bus to meet these requirements along with our Arduino based test system used to learn about the CAN bus standard and verify our analysis.

Lias, Malcolm↗
NASA NTRSDate not supplied

Advancing Launch Readiness of the Europa Light Microscope

The search for life in our solar system relies on our ability to measure key biomarkers in situ and identify them as likely of biotic origin. One class of biomarkers that would be indicative of life is cell-like features such as the colocalization of key biochemicals, spatial organization of native UV fluorescent compounds, and polarization across membrane compartments. The Europa Lander Science Definition Team has emphasized the need for a light microscope to search for these features on Europa, and the Europa Light Microscope (ELM) has been developed to address this need. This work presents the development towards high launch readiness of ELM by demonstrating its optical resolution under brightfield illumination, deep UV fluorescence imaging of unstained living samples, and multicolor imaging of samples stained with exogenous fluorophores targeting proteins, lipids, and nucleic acids. This work also seeks to extend the capabilities of ELM by incorporating fluorescence-based assays for membrane potential as a key biomarker for living cellular material.

Pavel Erich Zivanovic Klier↗
NASA NTRS2021

Permittivity Measurement System Using Stripline Method for the Europa Clipper Mission

High radiation Jovian environment can deposit electrons in highly resistive dielectric materials, which could result in internal electrostatic discharge (IESD) causing damage to sensitive electronics such as the radar for Europa Assessment and Sounding: Ocean to Near-Surface (REASON) instrument on NASA’s Europa Clipper mission. Special dielectric materials like static dissipative Polyetheretherketone (PEEK) ESD are under consideration for the Europa Clipper mission. PEEK loaded with carbon nanofibers improves the ESD performance for this material but the RF characteristics are unknown. We have developed a method to characterize the dielectric constant of a material as a function of frequency and temperature down to 30K. We present the measurement results of four samples of ESD. The measured data shows the permittivity of TECAPEEK ESD 11 is in the range of 7 to 10 at HF and in the range of 6.8 to 8.3 for VHF frequencies. The change in permittivity of ESD 11 down to 30 K is less than 7% at HF and less than 3% at VHF frequency. The sample to sample variability can be attributed to the inhomogeneity of the material.

Decrossas, Emmanuel↗