Search NASA⌕ Search

SEARCH · Search NASA

Results for “Eutectics model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Integrated Biorefinery of Brewer’s Spent Grain for Second-Generation Ethanol, Mycoprotein, and Bioactive Vinasse Production

Brewer’s spent grain (BSG), the main lignocellulosic by-product of the beer industry, represents an abundant yet underutilized resource with high potential for valorization. This study presents an integrated biorefinery approach to convert BSG into second-generation (2G) ethanol, bioactive vinasse for plant growth promotion, and fungal biomass as a potential mycoprotein source. The biomass was first subjected to biological delignification using the white-rot fungus Ganoderma lucidum, after which two valorization routes were explored: (i) evaluation of the fungal biomass as a mycoprotein candidate and (ii) alcoholic fermentation for ethanol production. For the latter, three pretreatment strategies were assessed (diluted sulfuric acid and two deep eutectic solvents (DESs) based on choline chloride combined with either glycerol or lactic acid) followed by a one-pot enzymatic saccharification and fermentation using Kluyveromyces marxianus SLP1. The highest ethanol yield on substrate (YP/S) was achieved with [Ch]Cl:lactic acid pretreatment (0.46 g/g, 89.32% of theoretical). Vinasse, recovered after distillation, was characterized for organic acid content and tested on Solanum lycopersicum seed germination, showing promising biostimulant activity. Overall, this work highlights the potential of BSG as a sustainable feedstock within circular economy models, enabling the production of multiple bio-based products from a single residue.

Ganoderma lucidum↗
NASA NTRS1982

Gravitationally induced convection during directional solidification of off-eutectic Mn-Bi alloys

The effects of thermal and solute gradient, gravity induced convection during vertical directional solidification, on longitudinal macrosegregation of Bi and Mn rich off-eutectic starting compositions, has been studied as a function of composition, growth velocity and gravity vector orientation. Since the morphology of these alloys is characterized by an aligned, rodlike permanent magnet composite when grown cooperatively, the magnetic properties were used to measure composition segregation and the transition from dendritic to composite growth. Severe macrosegregation was observed in all cases studied and the degree of convection inferred by modeling the observed composition segregation using a stagnant film approach. Morphological stability was found to follow a constitutional supercooling-type law for both Bi and Mn rich compositions.

Pirich, R. G.↗
DOE OSTI2025

Amino Acid Sequence Controls Enhanced Electron Transport in Heme-Binding Peptide Monolayers

Metal-binding proteins have the exceptional ability to facilitate long-range electron transport in nature. Despite recent progress, the sequence-structure–function relationships governing electron transport in heme-binding peptides and protein assemblies are not yet fully understood. In this work, the electronic properties of a series of heme-binding peptides inspired by cytochrome bc1 are studied using a combination of molecular electronics experiments, molecular modeling, and simulation. Self-assembled monolayers (SAMs) are prepared using sequence-defined heme-binding peptides capable of forming helical secondary structures. Following monolayer formation, the structural properties and chemical composition of assembled peptides are determined using atomic force microscopy and X-ray photoelectron spectroscopy, and the electronic properties (current density–voltage response) are characterized using a soft contact liquid metal electrode method based on eutectic gallium–indium alloys (EGaIn). Our results show a substantial 1000-fold increase in current density across SAM junctions upon addition of heme compared to identical peptide sequences in the absence of heme, while maintaining a constant junction thickness. These findings show that amino acid composition and sequence directly control enhancements in electron transport in heme-binding peptides. Overall, this study demonstrates the potential of using sequence-defined synthetic peptides inspired by nature as functional bioelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2012

ISS-Experiments of Columnar-to-Equiaxed Transition in Solidification Processing

The main topic of the research project CETSOL in the framework of the Microgravity Application Promotion (MAP) programme of the European Space Agency (ESA) is the investigation of the transition from columnar to equiaxed grain growth during solidification. Microgravity environment allows for suppression of buoyancy-driven melt flow and for growth of equiaxed grains free of sedimentation and buoyancy effects. This contribution will present first experimental results obtained in microgravity using hypo-eutectic AlSi alloys in the Materials Science Laboratory (MSL) on-board the International Space Station (ISS). The analysis of the experiments confirms the existence of a columnar to equiaxed transition, especially in the refined alloy. Temperature evolution and grain structure analysis provide critical values for the position, the temperature gradient and the solidification velocity at the columnar to equiaxed transition. These data will be used to improve modeling of solidification microstructures and grain structure on different lengths scales.

Sturz, Laszlo↗
DOE OSTI2021

Investigating the Variation in Solvation Interactions of Choline Chloride-Based Deep Eutectic Solvents Formed Using Different Hydrogen Bond Donors

Choline chloride-based deep eutectic solvents (DESs) have gained widespread recognition as green solvents in catalysis and separation science as their designer properties permit solvation properties to be modulated by the choice of the hydrogen bond donor (HBD) as well as its molar ratio. Despite being one of the most popular classes of DESs, very little is currently understood regarding how their solvation characteristics differ among themselves as well as from other classes of DESs. Previous studies have shown that the catalytic activity, extraction efficiency, and solubilities of natural compounds can be influenced by the type of choline salt and HBD, but no study has systematically related these parameters with its solvation properties. In this study, inverse gas chromatography was employed for the first time to study the individual solvation characteristics of a diverse range of choline chloride and acetate-based DESs composed of amides, diols, organic acids, and carbohydrates. Furthermore, hydrogen bond acidity was found to be a dominant interaction for all DESs, especially those composed of organic acid HBDs. DESs composed of isomers of butane diol and hexane diol as HBDs exhibited higher hydrogen bond basicity and dispersive-type interactions compared to those composed of urea, acetamide, and organic acids with the position of the hydroxyl functional group influencing their solvation interactions. Choline acetate-based DESs exhibited lower dipolarity and stronger hydrogen bond basicity and dispersive-type interactions compared to choline chloride DESs. The solvation models developed in this study were used to interpret and explain DES behavior in previously reported studies involving catalysis, organic synthesis, and extractions demonstrating that the measured solute–solvent interactions can serve to predict the performance of choline chloride-based DESs when used in various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

Non-Newtonian Convection and Compositional Buoyancy: Advances in Modeling Convection and Dome Formation on Europa

Numerical modeling of non-Newtonian convection in ice shows that convection controlled by grain boundary sliding rheology may occur in Europa. This modeling confirms that thermal convection alone cannot produce significant dome elevations. Domes may instead be produced by diapirs initiated by thermal convection that in turn induces compositional segregation. Exclusion of impurities from warm upwellings would allow sufficient buoyancy for icy plumes to account for the observed approximately 100 m topography of domes, provided the ice shell has a small effective elastic thickness (approximately 0.2 to 0.5 km) and contains low eutectic-point impurities at the few percent level.

Pappalardo, R. T.↗
DOE OSTI2021

Do Deep Eutectic Solvents Behave Like Ionic Liquid Electrolytes? A Perspective from the Electrode-Electrolyte Interface

The differential capacitance as a function of potential and composition for choline chloride (ChCl) and ethylene glycol (EG) at 1:2,1:4, 1:6, and 1:20 molar ratios were studied using electrochemical impedance spectroscopy (EIS) on glassy carbon. In addition, ChCl:EG at the known ethaline DES composition (1:2) and 1:20 molar ratio were studied on Au and Pt electrodes, and compared to glyceline (ChCl:glycerol, 1:2). The capacitance-potential curves on glassy carbon were best interpreted by the modified Gouy-Chapman model. A dampened U-shape was observed similar to dilute electrolytes, however, the non-negligible ionic and H-bonding interactions in these electrolytes resulted in ambiguity about the point of zero charge where capacitance was weakly dependent on potential. Additionally, the differential capacitance was independent of composition on glassy carbon due to limited availability of mobile free ions and constraints by solvated ion sizes within the interface. Increases in capacitance are observed with Au as a result of desolvation and specific adsorption of Cl, and with Pt upon decreased Cl concentrations. These results indicate DESs and H-bonded electrolytes with high salt concentrations are distinct from ionic liquids and present no pronounced over screening or crowding with applied potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding Redox Organic Behavior in Deep Eutectic Solvents: Considerations for Molecular Design

Electrolytes based on deep eutectic solvents (DESs) coupled with redox active organic molecules have shown potential as a versatile and energy dense electrochemical energy storage system. However, progress in these systems has been held back by a lack of understanding of the irregular behavior displayed when redox active organic molecules are transitioned from other solvent systems. In this work, the hydrogen bonding characteristics of a series of redox organic molecules were investigated through infrared spectroscopy and molecular modeling. New understanding of these interactions was then used to explain their electrochemical behavior in a DES electrolyte. A model was used to predict the behavior of new derivatives towards the design of an optimized redox organic-DES system. Hydrogen bonding between the redox molecules and the solvent was found to significantly shift the potential of a redox reaction more positive when a hydrogen bond forms at the redox active site. It was predicted that functionalizing a molecule with electron withdrawing groups to lower the electron density of the redox active functional group lowers the strength of the hydrogen bond and thus alleviates the undesirable potential shift. This hypothesis was demonstrated by the addition of nitro groups to fluorenones.

25 ENERGY STORAGE↗
DOE OSTI2022

Data-Centric Development of Lignin Structure–Solubility Relationships in Deep Eutectic Solvents Using Molecular Simulations

Lignin is a natural source of aromatic chemicals with significant potential as an abundant, renewable feedstock for value-added products. Deep eutectic solvents (DES)–solvents composed of a hydrogen bond donor (HBD) and acceptor (HBA) in varying ratios–have emerged as a highly tunable class of solvents for lignin solubilization. However, the variety of possible DES compositions and limited molecular-scale understanding of lignin solubility makes solvent selection a challenge without laborious trial-and-error experimentation. To address these challenges, we use classical molecular dynamics (MD) simulations to study the interactions of lignin model compounds with various DES–water systems. Quantitative parameters (descriptors) were calculated by postprocessing the MD results and used to train a regression model that predicts experimentally determined solubilities of lignin model compounds. This approach revealed that the most important descriptors of solubility are the system temperature, solute hydrophilicity, and metrics quantifying hydrogen bonding. Maximizing the interactions between solute–HBD (hydrophobic group), water–HBD (hydrophilic group), and water–HBA molecules led to the highest model compound solubility. Our results support a hydrotropic mechanism in which extensive DES–water hydrogen bonding and favorable HBD interactions with the solute promote high solubility. We applied the regression model derived using model compounds to predict the solubility of representative lignin oligomers. The model predicted lignin oligomers’ solubilities in good agreement with experiments, indicating that the simulations of model compounds can be extended to predict the solubility of larger lignin compounds across a range of solvent compositions and temperatures. Furthermore, these findings provide new molecular-scale insight into lignin solubilization mechanisms and a new method for computationally screening potential solvent systems for lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stress relaxation cracking susceptibility evaluation in 347H stainless steel welds

Abstract Stress relaxation cracking (SRC) has been reported as a dominant failure mechanism for 347H stainless steel welds at elevated service temperatures, occurring in either the heat-affected zone (HAZ) or fusion zone (FZ). In this study, SRC susceptibility of physically simulated HAZ and cross-welded E347-347H stainless steel welds was studied using a four-step accelerated SRC test with a thermomechanical physical simulator. The stress and temperature range studied represents weld-induced residual stress at 150–600 MPa and post-weld heat treatment temperatures between 800 and 1050 °C. For all temperature conditions, the cross-welded samples failed at a lower critical stress threshold than the simulated HAZ. A finite element model of a 50.8-mm-thick single-V groove weld was used to generate the residual stress maps induced by a 40-pass welding procedure, which in combination with the experimental threshold stress map predicted potential SRC failure locations. Postmortem microstructural evaluations were performed to identify contributing characteristics to SRC. It was found that HAZ samples exhibited a combination of creep void development, secondary cracks with intergranular fracture near grain boundary carbides, and eutectic phases. FZ samples showed brittle fracture with cracks propagating along straight, non-tortuous interdendritic grain boundaries.

42 ENGINEERING↗
DOE OSTI2022

Phase stability in cast and additively manufactured Al-rich Al-Cu-Ce alloys

Additively manufactured (AM) eutectic Al alloy systems have been studied extensively for advantageous thermal stability and mechanical properties due to their refined microstructures. Al-Cu-Ce alloys are one subset of these AM eutectic alloys. Here we studied phase stability in AM Al-Cu-Ce alloys and compared it to that of conventionally cast ones. A new phase, Al 8 Cu 3 Ce, was identified in the microstructures of both AM and cast Al-Cu-Ce alloys. This Al 8 Cu 3 Ce phase was not previously included on experimental or thermodynamically calculated phase diagrams of the Al-Cu-Ce system. Therefore, we performed additional thermodynamic modeling of the system. These models were experimentally validated with cast and subsequently heat-treated Al-Cu-Ce alloys. We found that despite the refined microstructure of the AM alloys, the phases formed were consistent with the cast alloys, suggesting that AM processing did not significantly alter the formation and stability of phases from that in the conventional alloys. In conclusion, this work has resolved inconsistent previous descriptions of the Al-Cu-Ce ternary phase diagram in the Al-rich region and resulted in the addition of the Al 8 Cu 3 Ce as an equilibrium phase above 500 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Insights into the Solvation Characteristics of Zwitterionic Deep Eutectic Solvents Using Multiple Polarity Scales

Deep eutectic solvents (DESs) formed by mixing zwitterionic hydrogen bond acceptors (HBAs) with diol- and organic acid-based hydrogen bond donors (HBDs) are popular sustainable solvents. In addition to possessing an amphiphilic character, zwitterionic DESs offer unique solvation properties, unlike those composed of halide-containing HBAs. While all other popular classes of DESs have been investigated, no study has attempted to characterize the solvation characteristics of zwitterionic DESs. In this study, the solvation properties of betaine [Bet]-, sulfobetaine-, and l-carnitine [l-Car]-based DESs were thoroughly investigated for the first time using solvatochromic dye methods and inverse gas chromatography (IGC). Herein, the Nile red polarity scale revealed that DESs composed of organic acids were generally more polar than diol-based DESs. Kamlet–Taft solvent parameters revealed that glycerol-based DESs offered exceptionally high hydrogen bond donating ability compared to those composed of 1,4-butane diol and triethylene glycol. The Abraham solvation parameter model revealed hydrogen bond basicity to be the most dominant interaction, and it was generally higher for diol-based HBDs compared to organic acid-based HBDs. Additionally, sulfobetaine HBAs possessing longer alkyl chains generally offered higher dispersive-type interactions and hydrogen bond basicity compared to [Bet] and [l-Car] salts. This is the first study to combine and compare results from solvatochromic dye methods and IGC in an attempt to comprehensively explain and predict the solvation characteristics of zwitterionic DESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of ATF Cr-coated-Zircaloy on BWR In-vessel Accident Progression during a Station Blackout

The deposition of protective coatings on nuclear fuel cladding has been considered as a near-term Accident Tolerant Fuel (ATF) concept that will reduce the high-temperature oxidation rate and enhance accident tolerance of the cladding while providing additional benefits during normal and transient. In this study, the performance of the proposed ATF concept of Cr-coated-Zircaloy is assessed using a generic Boiling Water Reactor MELCOR plant model considering a Short-term Station Blackout (STSBO) scenario. Simulation results indicate that the use of Cr-coated-Zircaloy as cladding and canister material mitigates the core degradation process as compared to the traditional Zircaloy cladding and canister design. The onset of fuel degradation and collapse is delayed by over thirty minutes, and the extent of fuel degradation is reduced. Specifically, the gross in-vessel hydrogen generation decreased by almost a factor of three. Although the eutectic reaction between Cr-coating and Zircaloy could cause an early failure of the coating, the improvement in the delay of fuel degradation is still notable. In addition, a thicker coating is found helpful to obtain additional coping time and to decrease hydrogen generation. In addition to the eutectic formation that may compromise Cr-coated Zr, a different failure mode is identified for the Cr-coated-Zr when compared to Zircaloy; i.e., a complete melt of base material leads to component collapse before the coating is oxidized and consumed. These findings can help the industry focus on productive areas of research and development for accident-tolerant fuel concepts and enhancement of core safety margins.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

High operating temperature heat transfer fluids for solar thermal power generation. Final report

This is the final technical report for the DOE MURI project on developing high-operating temperature heat transfer fluids for solar thermal power generation. This project aimed to evaluate liquid metals as a heat-transport fluid and potential energy storage medium for concentrated solar powered (CSP) systems. The project consisted of five phases, starting with fluid selection and screen and ending with potential CSP integration. The initial fluid selection arrived at heavy liquid metals as candidate fluids such as lead bismuth eutectic (LBE) as the prime liquid-alloy candidate to be studied, given the conditions above. Fifty-seven liquid compositions were initially identified with liquidus temperatures lower than 200°C, composed of elements that provide no driving force to the reduction of Cr 2 O 3 or Al 2 O 3 passivation layers in pipe material which is required for corrosion prevention. LBE was identified as the primary candidate fluid after these compositions were compared against computational thermodynamic modeling to screen all of the selected systems that would be compatible with our design objectives. Twenty-eight of these compositions were also investigated with the rapid characterization methods; the accuracies of the liquidus temperature and the specific heats predicted by the computations were better than 3 percent and 9 percent, respectively. We conducted numerus corrosion tests of various Fe-Cr-Al based steels in LBE and its variants at temperate as high as 800°C. It was found that minor additions to the liquid did not provide sufficient corrosion protection to warrant their use in real applications. Furthermore, we investigated the detailed mechanism of corrosion between heavy liquid metal and the pipe material at these very high temperatures. A liquid metal loop was constructed to operate at these high temperatures. The loop construction and operation lead to valuable lessons learned that will be needed for industrial scale loops. Furthermore, we learned that electromagnetic pumps at these extreme temperatures will have to be reengineered and redesigned to be used for CSP applications.

14 SOLAR ENERGY↗
DOE OSTI2024

Towards engineering the growth morphology of anisotropic bicrystals

Eutectic alloys, such as Pb-free Bi-Sn-Ag or Sn-Ag-Cu, are essential for their low melting points in solder joints but suffer from brittle intermetallic phases, reducing reliability. Traditional solder design relies on equilibrium phase diagrams, often neglecting the kinetic influence of crystalline anisotropy during solidification. This study hypothesizes that the energetics at the solid-solid-liquid trijunction dictate crystalline facet selection. Using the Al-Al 3 Ni alloy as a model, this project combines atomistic simulations and experimental methods to understand interfacial energies and develop predictive models. This approach aims to mitigate the negative effects of intermetallics, enhancing component reliability in electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Determination of Infinite Dilution Activity Coefficients of Molecular Solutes in Ionic Liquids and Deep Eutectic Solvents by Factorization-Machine-Based Neural Networks

Widely known as “green solvents,” ionic liquids (ILs) and deep eutectic solvents (DESs) have been used as substitutes for traditional organic solvents in separation science. To achieve better separations using ILs and DESs, this work aimed to predict the infinite dilution activity coefficients (IDACs) of molecular solutes in these solvents with the state-of-the-art factorization-machine-based neural network (DeepFM). DeepFM combines the benefits of factorization machines and deep neural networks to learn both low-order and high-order interactions among features. The IDAC prediction model was established with 52,372 experimental IDAC datapoints including 260 solvents (252 ILs and 8 DESs) and 112 molecular solutes collected at various temperatures from 288.15 to 428.15 K. Chemical information describing the ILs, DESs, and molecular solutes was included in the IDAC prediction model, including chemical functional groups, molecular weights, and Abraham solvation parameters. The IDAC prediction model showed an improved accuracy compared with alternative models; additionally, DESs were included in the IDAC prediction model for the first time. Here, the model will reduce the energy and resources needed to optimize the selection of ILs and DESs for specific separations, which will promote the development of these green solvents for sustainable chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In Situ Prediction of Microstructure and Mechanical Properties in Laser-Remelted Al-Si Alloys: Towards Enhanced Additive Manufacturing

Laser surface remelting of aluminum alloys has emerged as a promising technique to enhance mechanical properties through refined microstructures. This process involves rapid cooling rates ranging from 10 3 to 10 8 °C/s, which increase solid solubility within aluminum alloys, shifting their eutectic composition to a larger value of silicon content. Consequently, the resulting microstructure combines a strengthened aluminum matrix with silicon fibers. This study focuses on the laser scanning of Al-Si aluminum alloy to reduce the size of aluminum matrix spacings and transform fibrous silicon particles from micrometer to nanometer dimensions. Analysis revealed that the eutectic structure contained 17.55% silicon by weight, surpassing the equilibrium eutectic composition of 12.6% silicon. Microstructure dimensions within the molten zones, termed ‘melt pools’, were extensively examined using Scanning Electron Microscopy (SEM) at intervals of approximately 20 μm from the surface. A notable increase in hardness, exceeding 50% compared to the base plate, was observed in the melt pool regions. Thus, it is exemplified that laser surface remelting introduces a novel strengthening mechanism in the alloy. Moreover, this study develops an in situ method for predicting melt pool properties and dimensions. A predictive model is proposed, correlating energy density and spectral signals emitted during laser remelting with mechanical properties and melt pool dimensions. This method significantly reduces characterization time from days to seconds, offering a streamlined approach for future studies in additive manufacturing.

36 MATERIALS SCIENCE↗
NASA NTRS1981

The liquid droplet radiator - An ultralightweight heat rejection system for efficient energy conversion in space

A heat rejection system for space is described which uses a recirculating free stream of liquid droplets in place of a solid surface to radiate waste heat. By using sufficiently small droplets (less than about 100 micron diameter) of low vapor pressure liquids (tin, tin-lead-bismuth eutectics, vacuum oils) the radiating droplet sheet can be made many times lighter than the lightest solid surface radiators (heat pipes). The liquid droplet radiator (LDR) is less vulnerable to damage by micrometeoroids than solid surface radiators, and may be transported into space far more efficiently. Analyses are presented of LDR applications in thermal and photovoltaic energy conversion which indicate that fluid handling components (droplet generator, droplet collector, heat exchanger, and pump) may comprise most of the radiator system mass. Even the unoptimized models employed yield LDR system masses less than heat pipe radiator system masses, and significant improvement is expected using design approaches that incorporate fluid handling components more efficiently. Technical problems (e.g., spacecraft contamination and electrostatic deflection of droplets) unique to this method of heat rejection are discussed and solutions are suggested.

Mattick, A. T.↗