Search NASA⌕ Search

SEARCH · Search NASA

Results for “Exploratory Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A More Precise Measurement of the Radius of PSR J0740+6620 Using Updated NICER Data

PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be 2.08 ± 0.07 M ⊙ . Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. and Riley et al. reported measurements of the radius of PSR J0740+6620 based on Neutron Star Interior Composition Explorer (NICER) observations accumulated through 2020 April 17, and an exploratory analysis utilizing NICER background estimates and a data set accumulated through 2021 December 28 was presented in Salmi et al. Here we report an updated radius measurement, derived by fitting models of X-ray emission from the neutron star surface to NICER data accumulated through 2022 April 21, totaling ~1.1 Ms additional exposure compared to the data set analyzed in Miller et al. and Riley et al., and to data from XMM-Newton observations. We find that the equatorial circumferential radius of PSR J0740+6620 is ${12.92}_{-1.13}^{+2.09}$ km (68% credibility), a fractional uncertainty ~83% the width of that reported in Miller et al., in line with statistical expectations given the additional data. If we were to require the radius to be less than 16 km, as was done in Salmi et al., then our 68% credible region would become $R={12.76}_{-1.02}^{+1.49}$ km, which is close to the headline result of Salmi et al. Our updated measurements, along with other laboratory and astrophysical constraints, imply a slightly softer equation of state than that inferred from our previous measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Climate Change Feedbacks from Interactions Between New and Old Carbon

Priming effects, or responses of SOM decomposition rates to inputs of new, labile carbon (C), have the potential to dramatically alter projections of ecosystem C storage. Priming effects occur in most ecosystems, are significant in magnitude, and are highly sensitive to global changes. Nevertheless, our mechanistic understanding of priming effects remains poor, and this has prevented the inclusion of these dynamics into current Earth system models (ESMs). We conducted two manipulative experiments in the field to quantify how priming effects influence SOM dynamics. Specifically, we asked: To what extent do inputs of “new” root-derived carbon (C) influence “older” C in SOM, and are the magnitude and direction of these effects sensitive to climate? We addressed these questions within the Boston-Area Climate Experiment - an old-field ecosystem that has been subjected to three precipitation treatments (ambient, -50%, and +50% of each precipitation event during the growing season) and four warming treatments (from ambient to +4°C) since 2008. In the first experiment, we installed root and fungal ingrowth cores into the plots. Each core was filled with SOM that had an isotopic signature (of its C compounds) that differed from the vegetation in the plots such that inputs of “new” C from roots/fungi could be quantified using the change in isotopic signatures of C in the cores. Further, we used cores with different mesh sizes to isolate root vs. mycorrhizal fungal inputs. We found that belowground C fluxes were dominated by root inputs (as opposed to mycorrhizal inputs), and that root-derived inputs were greatest in the plots subjected to experimental warming. Given that that the warming-induced increase in belowground C flux did not result in a net increase in soil C, we conclude that the warming treatment likely enhanced priming effects in these soils. In the second experiment, we experimentally dripped dissolved organic C compounds into soils in the BACE plots to simulate root-derived C fluxes. Specifically, we constructed artificial roots attached to an automated peristaltic pump to deliver the compounds to soil semi-continuously during the peak of the growing season. We found that changes in exudate quality had small but significant effects on microbial activities, often interacting with N availability and temperature-induced changes. These results further underscore the importance of priming effects, especially under warming conditions. Collectively, our results provide some of the first field-based estimates of how soil moisture and temperature can directly and indirectly alter root-induced changes in SOM dynamics. This exploratory project lays the groundwork for further research on priming that incorporates effects of plant species and microbial communities to global changes. Such information should enable the development of more mechanistic and better predictive models of SOM decomposition under increased greenhouse gas levels, with the ultimate goal of reducing the level of uncertainty in projections of future climate.

54 ENVIRONMENTAL SCIENCES↗

Understanding and Modeling Pooled Rideshare Acceptance: Influential Factors, Preferred User Experiences, and Implications

This dissertation explores factors influencing pooled rideshare (PR) adoption to provide actionable insights for transportation network companies (TNCs) and policymakers. PR allows travelers to share rides with unknown passengers, offering benefits such as cost reduction and congestion relief. However, adoption remains limited due to safety concerns, privacy issues, and trust in rideshare platforms. A national U.S. survey with 5,385 respondents examined transportation preferences and barriers to PR adoption. Exploratory and confirmatory factor analyses identified five key factors influencing PR consideration—safety, service experience, privacy, traffic/environment, and time/cost. Second factor analyses examined ways to optimize PR experiences, revealing four factors—comfort/ease of use, convenience, vehicle technology/accessibility, and passenger safety. Privacy concerns, for instance, using regression analysis, were found to reduce the likelihood of PR adoption by 77%, and convenience had the potential to increase it by 156%. The Pooled Rideshare Acceptance Model (PRAM), based on the Technology Acceptance Model, assessed the impact of these factors using the Structural Equation Model (SEM). Privacy, safety, trust, and convenience had a large effect (Cohen's f2 > 0.35) on PR acceptance, while multigroup analyses (PRAMMA) explored 16 demographic variables such as gender, generation, and income, emphasizing the need for tailored strategies. Based on all the statistical analysis and workshops using descriptive statistics, 95 actionable recommendations were made from the riders' perspective. Findings highlight the importance of customized services, user experience improvements, and policy interventions to enhance PR adoption. This dissertation provides a roadmap for future research and policy development, ensuring evidence-based, practical strategies to improve PR services in the U.S. and beyond.

Gangadharaiah, Rakesh↗

Diagnostics and Models for Birthing Stress

Understanding the stress development in fluids as they transition to solids is not well-understood. Computational models are needed to represent "birthing stress" for multiphysics applications such as polymer encapsulation around sensitive electronics and additive manufacturing where these stresses can lead to defects such as cracking and voids. The local stress state is also critical to understand and predict the net shape of parts formed in the liquid phase. In this one-year exploratory LDRD, we have worked towards a novel experimental diagnostic to measure the fluid rheology, degree of solidification, and the solid stress development simultaneously. We debugged and made viable a "first-generation" Rheo-Raman system and used it to characterize two types of solidifying systems: paraffin wax, which crystalizes as it solidifies, and thermoset polymers, which form a network of covalent bonds. We used the paraffin wax as a model system to perform flow visualization studies and did some preliminary modeling of the experiment, to demonstrate the inadequacy of the current modeling approaches. This work will inform an advanced fluid constitutive equation that includes a yield stress, temperature dependence, and an evolving viscosity when we pursue the full proposal, which was funded for FY20.

36 MATERIALS SCIENCE↗

Coherent energy loss effects in dihadron azimuthal angular correlations in Deep Inelastic Scattering at small x

We perform an exploratory study of the role of coherent, medium-induced energy loss in azimuthal angular correlations in dihadron production in Deep Inelastic Scattering (DIS) at small x where the target proton/nucleus is modeled as a Color Glass Condensate. In this approach coherent radiative energy loss is part of the higher order corrections to the leading order dihadron production cross section. We include the effects of both gluon saturation and coherent radiative energy loss and show that radiative cold-matter energy loss has a significant effect on the so-called coincidence probability for the back-to-back production of dihadrons in DIS. In conclusion, we also define a double ratio of coincidence probabilities for a nucleus and proton targets and show that it is very robust against higher order radiative corrections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sticky roots--implications of widespread, cryptic, viral infection of plants in natural and managed ecosystems for soil carbon processing in the rhizosphere

Plants strongly influence soil properties through rhizodeposition, in which exudates diffuse from roots, additional secretions are actively released, and root cells are sloughed into the soil. This contribution by plants of carbon compounds belowground is at the core of soil health, water holding capacity, and the soil carbon storage that pulls carbon dioxide out of the atmosphere. Once in soil, organic matter can bind with minerals such as iron hydroxides, where it can be protected from microbial attack for millenia, preserving very large terrestrial soil carbon pools. However, those same compounds contributed by roots to soil may also destabilize the long-term protective associations of SOM with minerals, making that soil organic matter (SOM) more vulnerable to microbial attack and decomposition. Plant roots thus influence both the buildup and breakdown of soil carbon pools. DOE’s E3SM Land Model (ELM) includes a representation of soil carbon storage on minerals, but the potential vulnerability of SOM–mineral associations to effects of rhizodeposition is not yet represented in ELM. To begin testing for this effect of rhizodeposition on soil carbon storage and decomposition, we worked to develop a novel approach during this TES Exploratory project DE-SC0019142 – we harnessed the power of plant viral infection. We examined whether plant virus infection can serve as a tool to intensify rhizodeposition at the root surface, and therefore possibly intensify mobilization of SOM from minerals making it visible to our analytical techniques. Viral infection is widespread in terrestrial ecosystems; 25-70% of plants have virus infection, yet the influence of such infection on root traits and terrestrial soil carbon dynamics remains largely unexplored. We used two plant hosts: the annual Avena sativa (oats) and the genetically tractable, model grass Brachypodium distachyon. These grasses were infected with the broad host range virus Barley Yellow Dwarf Virus (BYDV) via aphids (Rhopalosiphum padi). BYDV infects at least 150 grass species in agricultural and natural ecosystems, and in previous experiments, oats infected with BYDV had roots that were very sticky to the touch, strongly suggesting that infection altered rhizodeposition. We developed this new experimental approach mostly in a one virus (Barley Yellow Dwarf Virus)–one plant (Avena sativa) system. (Several effects of infection in a Brachypodium-BYDV system were similar in nature to effects on Avena sativa, but were more variable.) In the BYDV-Avena system, we developed protocols for consistently infecting target plants (and avoiding infection of control plants) using aphid caging on leaves. We measured that infected plants exhibited reduced photosynthesis, plant (including root) biomass, and root:shoot ratio, as well as simplified root system architecture. We established procedures for sampling the organic compounds carried specifically in phloem (vascular tissue) of leaves and roots, using aphid stylectomy. We used FTICR-MS, Orbitrap GC-MS, and LC-MS/MS to analyze organic compounds in phloem, liquid around roots of plants grown hydroponically, and pore water around roots in soil, and found differences in the compounds in solution bathing roots when infected and uninfected plants were grown hydroponically. Finally, we synthesized isotopically-labeled mineral–organic matter (MAOM) associations in the lab and developed assays using them in solution and in soil. Assays quantified the extent and rate of mineralization of labeled MAOM that was mobilized by functionally distinct rhizodeposits and then attacked by microbes. Two mechanisms for MAOM mobilization emerged, with distinct dynamics. During “direct” mobilization, rhizodeposits such as the strong ligand oxalic acid could drive rapid dissolution of minerals, mobilizing MAOM. During “indirect” mobilization, rhizodeposits such as the simple sugar glucose did not attack minerals directly but instead intensified microbial activity, which led to mobilization via changes in e.g. pH, Eh, and microbial metabolite production (Li et al. 2021). Mechanistic understanding derived from these data and our ongoing experiments using these techniques will inform future development of ELM. Plant roots not only contribute newly fixed organic compounds to soils, but also root activities can drive mineralization of the carbon and nutrients mobilized off minerals via “indirect” or “direct” mechanisms. Using viral infection as a new tool, ongoing combined experimentation and modeling will explore the strength and larger-scale significance of the cascade of processes from rhizodeposition to MAOM mobilization for soil carbon storage and nutrient cycling in terrestrial ecosystems. And if viral infection leads quite generally to “sticky roots”, our perception of the potential importance of prevalent virus infection in terrestrial landscapes will be transformed.

54 ENVIRONMENTAL SCIENCES↗

Coincident Aerosol and H2O Retrievals versus HSI Imager Field Campaign ReportH2O Retrievals versus HSI Imager Field Campaign Report

Two spectrally calibrated tarpaulins (tarps) were co-located at a fixed Global Positioning System (GPS) position on the gravel antenna field at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Southern Great Plains (SGP) site. Their placement was timed to coincide with the overflight of a new hyperspectral imaging satellite. The intention was to provide an analysis of the data obtained, including the measured and retrieved spectral albedos for the calibration tarps. Subsequently, a full suite of retrieved values of H2O column, and the aerosol overburden, were to be compared to those determined by alternate SGP ground truth assets. To the extent possible, the down-looking cloud images would be assessed against the all-sky images. Because cloud contamination above a certain level precludes the inversion processing of the satellite data, coupled with infrequent targeting opportunities, clear-sky conditions were imposed. The SGP site was chosen not only as a target of opportunity for satellite validation, but as perhaps the best coincident field measurement site, as established by DOE’s ARM Facility. The satellite team had every expectation of using the information obtained from the SGP to improve the inversion products for all subsequent satellite images, including the cloud and radiative models and parameterizations and, thereby, the performance assessment for subsequent and historic image collections. Coordinating with the SGP onsite team, four visits, all in 2009, to the Central Facility occurred: • June 6-8 (successful exploratory visit to plan tarp placements, etc.) • July 18-24 (canceled because of forecast for heavy clouds) • Sep 9-12 (ground tarps placed, onset of clouds) • Nov 7-9 (visit ultimately canceled because of weather predictions). As noted, in each instance, any significant overcast prediction precluded image collection from the satellite. Given the long task-scheduling procedures (which were in place for each time period), coupled with other priorities and the satellite lifetime, no alternate SGP images could be obtained.

54 ENVIRONMENTAL SCIENCES↗

2023 Reftek Colt Seismometer Exploratory Evaluation

Sandia National Laboratories has tested and evaluated three Colt broadband seismometers designed and manufactured by Reftek. The purpose of this seismometer evaluation is to measure performance characteristics in areas such as power consumption, sensitivity, frequency response, full scale, self-noise, dynamic range, calibration system response, and passband. The Colt model of sensors are being evaluated to explore the potential for a future seismometer Type Approval process in the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty (CTBT).

47 OTHER INSTRUMENTATION↗

Discovery of Novel Complex Metal Hydrides for Hydrogen Storage through Molecular Modeling and Combinatorial Methods

UOP LLC, a Honeywell Company, Ford Motor Company, and Striatus, Inc., collaborated with Professor Craig Jensen of the University of Hawaii and Professor Vidvuds Ozolins of University of California, Los Angeles on a multi-year cost-shared program to discover novel complex metal hydrides for hydrogen storage. This innovative program combined sophisticated molecular modeling with high throughput combinatorial experiments to maximize the probability of identifying commercially relevant, economical hydrogen storage materials with broad application. A set of tools was developed to pursue the medium throughput (MT) and high throughput (HT) combinatorial exploratory investigation of novel complex metal hydrides for hydrogen storage. The assay programs consisted of monitoring hydrogen evolution as a function of temperature. This project also incorporated theoretical methods to help select candidate materials families for testing. The Virtual High Throughput Screening served as a virtual laboratory, calculating structures and their properties. First Principles calculations were applied to various systems to examine hydrogen storage reaction pathways and the associated thermodynamics. The experimental program began with the validation of the MT assay tool with NaAlH4/0.02 mole Ti, the state of the art hydrogen storage system given by decomposition of sodium alanate to sodium hydride, aluminum metal, and hydrogen. Once certified, a combinatorial 21-point study of the NaAlH4 LiAlH4Mg(AlH4)2 phase diagram was investigated with the MT assay. Stability proved to be a problem as many of the materials decomposed during synthesis, altering the expected assay results. This resulted in repeating the entire experiment with a mild milling approach, which only temporarily increased capacity. NaAlH4 was the best performer in both studies and no new mixed alanates were observed, a result consistent with the VHTS. Powder XRD suggested that the reverse reaction, the regeneration of the alanate from alkali hydride, Al and hydrogen, was hampering reversibility. The reverse reaction was then studied for the same phase diagram, starting with LiH, NaH, and MgH2, and Al. The study was extended to phase diagrams including KH and CaH2 as well. The observed hydrogen storage capacity in the Al hexahydrides was less than 4 wt. %, well short of DOE targets. The HT assay came on line and after certification with studies on NaAlH4, was first applied to the LiNH2 - LiBH4 - MgH2 phase diagram. The 60-point study elucidated trends within the system locating an optimum material of 0.6 LiNH2 0.3 MgH2 0.1 LiBH4 that stored about 4 wt. % H2 reversibly and operated below 220 °C. Also present was the phase Li4(NH2)3BH4, which had been discovered in the LiNH2 -LiBH4 system. This new ternary formulation performed much better than the well-known 2 LiNH2MgH2 system by 50 °C in the HT assay. The Li4(NH2)3BH4 is a low melting ionic liquid under our test conditions and facilitates the phase transformations required in the hydrogen storage reaction, which no longer relies on a higher energy solid state reaction pathway. Further study showed that the 0.6 LiNH2 0.3 MgH2 0.1 LiBH4 formulation was very stable with respect to ammonia and diborane desorption, the observed desorption was from hydrogen. This result could not have been anticipated and was made possible by the efficiency of HT combinatorial methods. Investigation of the analogous LiNH2 LiBH4 CaH2 phase diagram revealed new reversible hydrogen storage materials 0.625 LiBH4 + 0.375 CaH2 and 0.375 LiNH2 + 0.25 LiBH4 + 0.375 CaH2 operating at 1 wt. % reversible hydrogen below 175 °C. Powder x-ray diffraction revealed a new structure for the spent materials which had not been previously observed. While the storage capacity was not impressive, an important aspect is that it boron appears to participate in a low temperature reversible reaction. The last major area of study also focused on activating boron-based materials in order to exploit the tremendous gravimetric capacity of LiBH4. A number of LiNH2 LiBH4 transition metal (TM) systems were investigated for the following reasons. No additional leads were discovered in this system. Another major project activity was the assembly of a high throughput synthesis system. The automated synthesizer was set up in a glovebox and was capable of handling liquids and powders and carrying out sealed block syntheses up to 250 °C. Unfortunately, the synthesizer could not handle the delivery of the fine powders required fro hydrogen storage applications. Although the powder delivery system was overhauled and redesigned several times, this problem was never remedied.

08 HYDROGEN↗

Challenges in leveraging existing human performance data for quantifying the IDHEAS HRA method

Our article documents an exploratory study for collecting and using human performance data to inform human error probability (HEP) estimates for a new human reliability analysis (HRA) method, the IntegrateD Human Event Analysis System (IDHEAS). The method was based on cognitive models and mechanisms underlying human behaviour and employs a framework of 14 crew failure modes (CFMs) to represent human failures typical for human performance in nuclear power plant (NPP) internal, at-power events [1]. A decision tree (DT) was constructed for each CFM to assess the probability of the CFM occurring in different contexts. Data needs for IDHEAS quantification are discussed. Then, the data collection framework and process is described and how the collected data were used to inform HEP estimation is illustrated with two examples. Next, five major technical challenges are identified for leveraging human performance data for IDHEAS quantification. Furthermore, these challenges reflect the data needs specific to IDHEAS. More importantly, they also represent the general issues with current human performance data and can provide insight for a path forward to support HRA data collection, use, and exchange for HRA method development, implementation, and validation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Data Assimilative Optimization of WSA Source Surface and Interface Radii using Particle Filtering

TheWang-Sheeley-Arge (WSA) model estimates solar wind speed and interplanetary magnetic field polarity in the inner heliosphere using global photospheric magnetic field maps. WSA employs the Potential Field Source Surface (PFSS) and Schatten Current Sheet (SCS) models to determine the Sun's global coronal magnetic field. The PFSS and SCS models are connected through two radial parameters, the source surface and interface radii, which specify the overlap region between the inner SCS and outer PFSS models. Though both radii values are adjustable, they have typically been fixed to 2.5 solar radii. Our work highlights how solar wind predictions improve when the radii are allowed to vary over time. Data assimilation using particle filtering (sequential Monte Carlo) is used to infer optimal values over a fixed time window. Solar wind model predictions and satellite observations are compared with a newly developed quality-of-agreement prediction metric. The agreement metric between the model and observations is assumed to correspond to the probability of the two key WSA model parameters, the source surface and interface radii, where the highest metric value implies the optimal radii.We find that the optimal particle filter values of solar radii can perform twice as well as standard values for an exploratory period during Carrington Rotation 1901, with these values also reducing nonphysical kinking effects seen in solar magnetic field lines. Data assimilation choices of input realization and time frame have implications for variation in the solar wind over time. We present this work's theoretical context and practical applications for prediction accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessing the use of reflectance spectroscopy in determining CsCl stress in the model species Arabidopsis thaliana

Here, reflectance spectroscopy is a rapid and non-destructive analytical technique that may be used for assessing plant stress, and has potential applications for use in remediation. Changes in reflectance such as that due to metal stress may occur before damage is visible, and existing studies have shown that metal stress does cause changes in plant reflectance. To further investigate the potential use of reflectance spectroscopy as a method for assessing metal stress in plants, an exploratory study was conducted in which Arabidopsis thaliana plants were treated twice weekly in a laboratory setting with varying levels (0, 0.5, or 5 mM (millimolar)) of caesium chloride (CsCl) solution, and reflectance spectra were collected every week for three weeks using an Analytical Spectral Devices FieldSpec Pro spectroradiometer with both a contact probe (CP) and a field of view (FOV) probe at 36.8 and 66.7 cm, respectively, above the plant. Plants were harvested each week after spectra collection for determination of relative water content and chlorophyll content. A visual assessment of the plants was also conducted using point observations on a uniform grid of 81 points. A mixed-effects model analysis was conducted for each vegetation index (VI) considered to determine the effects of length of treatment, treatment level, view with which spectra were acquired, and the interactions of these terms. Two-way analyses of variance (ANOVAs) were performed on the aforementioned endpoints (e.g. chlorophyll content) to determine the significance of the effects of treatment level and length of treatment. Multiple linear regression (MLR) was used to develop a predictive model for each endpoint, considering VI acquired at each view (CP, high FOV, and low FOV). Of the 14 VI considered, 8 were included in the MLR models. Contact probe readings and FOV readings differed significantly, but FOV measurements were generally consistent at each height.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highlights of X-Stack ExM Deliverable: MosaStore

This brief report highlights the experience gained with MosaStore, an exploratory part of the X-Stack project “ExM: System support for extreme-scale, many-task applications”. The ExM project proposed to use concurrent workflows supported by the Swift language and runtime as an innovative programming model to exploit parallelism in exascale computers. MosaStore aims to support this endeavor by improving storage support for workflow-based applications, more precisely by exploring the gains that can be obtained from co-designing the storage system and the workflow runtime engine. MosaStore has been developed primarily at the University of British Columbia.

97 MATHEMATICS AND COMPUTING↗

Panta Rhei benchmark dataset: socio-hydrological data of paired events of floods and droughts

As the adverse impacts of hydrological extremes increase in many regions of the world, a better understanding of the drivers of changes in risk and impacts is essential for effective flood and drought risk management and climate adaptation. However, there is currently a lack of comprehensive, empirical data about the processes, interactions, and feedbacks in complex human–water systems leading to flood and drought impacts. Here we present a benchmark dataset containing socio-hydrological data of paired events, i.e. two floods or two droughts that occurred in the same area. The 45 paired events occurred in 42 different study areas and cover a wide range of socio-economic and hydro-climatic conditions. The dataset is unique in covering both floods and droughts, in the number of cases assessed and in the quantity of socio-hydrological data. The benchmark dataset comprises (1) detailed review-style reports about the events and key processes between the two events of a pair; (2) the key data table containing variables that assess the indicators which characterize management shortcomings, hazard, exposure, vulnerability, and impacts of all events; and (3) a table of the indicators of change that indicate the differences between the first and second event of a pair. The advantages of the dataset are that it enables comparative analyses across all the paired events based on the indicators of change and allows for detailed context- and location-specific assessments based on the extensive data and reports of the individual study areas. The dataset can be used by the scientific community for exploratory data analyses, e.g. focused on causal links between risk management; changes in hazard, exposure and vulnerability; and flood or drought impacts. The data can also be used for the development, calibration, and validation of socio-hydrological models. The dataset is available to the public through the GFZ Data Services (Kreibich et al., 2023, https://doi.org/10.5880/GFZ.4.4.2023.001).

54 ENVIRONMENTAL SCIENCES↗

The core mass growth and stellar lifetime of thermally pulsing asymptotic giant branch stars

We establish new constraints on the intermediate-mass range of the initial-final mass relation, and apply the results to study the evolution of stars on the thermally pulsing asymptotic giant branch (TP-AGB). These constraints derive from newly discovered (bright) white dwarfs in the nearby Hyades and Praesepe star clusters, including a total of 18 high signal-to-noise ratio measurements with progenitor masses of M {sub initial} = 2.8-3.8 M {sub ☉}. We also include a new analysis of existing white dwarfs in the older NGC 6819 and NGC 7789 star clusters, M {sub initial} = 1.6 and 2.0 M {sub ☉}. Over this range of initial masses, stellar evolutionary models for metallicity Z {sub initial} = 0.02 predict the maximum growth of the core of TP-AGB stars. By comparing the newly measured remnant masses to the robust prediction of the core mass at the first thermal pulse on the AGB (i.e., from stellar interior models), we establish several findings. First, we show that the stellar core mass on the AGB grows rapidly from 10% to 30% for stars with M {sub initial} = 1.6 to 2.0 M {sub ☉}. At larger masses, the core-mass growth decreases steadily to ∼10% at M {sub initial} = 3.4 M {sub ☉}, after which there is a small hint of a upturn out to M {sub initial} = 3.8 M {sub ☉}. These observations are in excellent agreement with predictions from the latest TP-AGB evolutionary models in Marigo et al. We also compare to models with varying efficiencies of the third dredge-up and mass loss, and demonstrate that the process governing the growth of the core is largely the stellar wind, while the third dredge-up plays a secondary, but non-negligible role. Based on the new white dwarf measurements, we perform an exploratory calibration of the most popular mass-loss prescriptions in the literature, as well as of the third dredge-up efficiency as a function of the stellar mass. Finally, we estimate the lifetime and the integrated luminosity of stars on the TP-AGB to peak at t ∼ 3 Myr and E = 1.2 × 10{sup 10} L {sub ☉} yr for M {sub initial} ∼ 2 M {sub ☉} (t ∼ 2 Myr for luminosities brighter than the red giant branch tip at log (L/L {sub ☉}) > 3.4), decreasing to t = 0.4 Myr and E = 6.1 × 10{sup 9} L {sub ☉} yr for stars with M {sub initial} ∼ 3.5 M {sub ☉}. The implications of these results are discussed, especially with respect to general studies aimed at characterizing the integrated light output of TP-AGB stars in population synthesis models.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessment of Condition Monitoring Methods and Technologies for Inservice Inspection and Testing of Nuclear Power Plant Components

This report was prepared for the U.S. Nuclear Regulatory Commission (NRC) to explore the application of advanced technologies toward meeting the current and future regulatory requirements for maintenance and condition monitoring of structures, systems, and components. The advanced technologies considered in this work are advanced sensors and instrumentation, data analytics, machine learning and artificial intelligence (ML/AI), physics-based models, and digital twins (DT). The interest in the application of advanced technologies for condition monitoring in nuclear power plants continues to grow, and current and future licensees are expected to implement advanced technologies as part of their inservice inspection (ISI) and inservice testing (IST) programs. This report delineates the outcomes of an exploratory investigation into the implementation of advanced condition monitoring technologies to address ISI and IST requirements. A thorough review was conducted of the existing regulatory requirements for ISI and IST, along with an analysis of associated industry practices. Additionally, a state-of-the-art assessment was performed on advanced condition monitoring technologies frequently employed in non-nuclear sectors. This research incorporated two nuclear-specific case studies to illustrate the application of these technologies within the current nuclear fleet. The report provides an exhaustive discussion on the technical challenges, considerations, and opportunities associated with the deployment of advanced condition monitoring technologies. The following are key considerations in the application of advanced technologies for the ISI and IST of nuclear power plant components: • Developing adequate verification and validation procedures to confirm the functional and non-functional requirements, • Developing technical capabilities to conduct real-time asset condition monitoring, • Establishing guidance and protocol for modeling and simulation tools to continuously meet regulatory requirements, • Addressing trustworthiness, explainability, and interpretability of ML/AI methods, • Evaluating maintenance activities to maintain an adequate safety margin and avoid undesirable conditions, • Establishing cybersecure condition monitoring programs associated with a computer-based software system, and • Establishing standardized evaluation metrics for advanced condition monitoring programs. Interest in the use of advanced technologies for condition monitoring in ISI and IST programs continues to grow, and the technology is expected to experience rapid and wide industry adoption in the near future. Adoption of advanced technologies for condition monitoring could have novel and unique impacts on regulatory activities associated with ISI and IST programs. The NRC is continuing to explore the regulatory aspects of advanced technologies as part of ISI and IST programs by pursuing additional research in this technical area.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

The compelling case for indentation as a functional exploratory and characterization tool

The utility of indentation testing for characterizing a wide range of mechanical properties of brittle materials is highlighted in light of recent articles questioning its validity, specifically in relation to the measurement of toughness. Contrary to assertion by some critics, indentation fracture theory is fundamentally founded in Griffith–Irwin fracture mechanics, based on model crack systems evolving within inhomogeneous but well-documented elastic and elastic–plastic contact stress fields. Notwithstanding some numerical uncertainty in associated stress intensity factor relations, the technique remains an unrivalled quick, convenient and economical means for comparative, site-specific toughness evaluation. Most importantly, indentation patterns are unique fingerprints of mechanical behavior and thereby afford a powerful functional tool for exploring the richness of material diversity. At the same time, it is cautioned that unconditional usage without due attention to the conformation of the indentation patterns can lead to overstated toughness values. Limitations of an alternative, more engineering approach to fracture evaluation, that of propagating a precrack through a “standard” machined specimen, are also outlined. Thus misconceptions in the critical literature concerning the fundamental nature of crack equilibrium and stability within contact and other inhomogeneous stress fields are discussed.

36 MATERIALS SCIENCE↗

E-waste collection in Italy: Results from an exploratory analysis

Highlights: • The performance of the Italian household collection system for E-waste is analysed in a panel data regression analysis. • N. of Collection points, % of female, % of waste separately collected are positively correlated with kg of E-waste collected. • Population density is negatively correlated with kg of E-waste collected. • The Stochastic Frontier Model identifies the optimal production function. • Tuscany, Sardinia and Sicily are the best performing regions. - Abstract: This study looks at the performance of household electrical and electronic waste (WEEE) collection in 20 Italian regions from 2008 to 2015. The impact of several explicative variables on the results of e-waste collection is evaluated. The independent variables are socio-economic and demographic ones (age, gender, household size, education level, migration and income) along with technical-organisational variables (population density, presence of metropoles, macro regions, characteristics of the territory, percentage of household waste collected separately and number of e-waste collection points). The results show that the presence of collection points, the percentage of household waste collected separately and the percentage of females are positively correlated with the kg collected per inhabitant per year. For example, a variation of 1% of input (presence of collection points) corresponds to a 0.25% variation in the output (collection results) while 1% difference in the percentage of females in the population corresponds to a 7.549% difference in the collection rate. Population density, instead, is negatively correlated. It is interesting to note that there is a discrepancy between the Southern regions and the Centre regions (the former have an outcome 0.66 times lower than the latter) while the Northern regions perform similarly to the Centre ones. Moreover, the first year (2008) had a very low performance compared to the following years when the scheme constantly improved, mainly due to the additional collection points available. The Stochastic Frontier Model allows for the identification of the optimal production function among the 20 Italian regions. The best performing region is Tuscany (in the Centre), followed by Sardinia and Sicily (in the South).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗