Search NASA⌕ Search

SEARCH · Search NASA

Results for “FOAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Compressibility and permeability of particulated non-recyclable municipal solid waste

Biofuels from non-recyclable municipal solid waste (NMSW) stand at the forefront of energy sustainability. However, their widespread adoption is hampered by persistent material handling issues stemming from the variability in NMSW material properties. An enhanced understanding of particulated NMSW properties, particularly compressibility and permeability, is essential to address the feedstock handling challenges and optimize the handling equipment. This study measures the compressibility and gas permeability of five streams of NMSW materials (i.e., rigid plastics, cardboard, thin film, paper, and foam) and their mixtures under different stress conditions. The results highlight the significant variability in compressibility and gas permeability among different streams, as well as the impacts of particle sizes. A semi-empirical model capable of predicting the gas permeability of NMSW mixtures is established and validated. Here, the results also highlight that reduced NMSW particle size helps promote consistency in NMSW feedstock’s physical and mechanical properties, which is favored for handling equipment design in waste-to-energy recovery facilities.

09 BIOMASS FUELS↗
DOE OSTI2025

Demonstration and characterization of insertable passive thermal switches for dynamic building envelopes

A dynamic building envelope integrated with thermal energy storage, such as phase change material (PCM), is an emerging technology that offers a promising solution to improve the energy efficiency of buildings. This study reports the development of insertable thermal switches, which modulate thermal resistance, thereby making building envelopes dynamic and enhancing the use of free ambient heating and cooling. The reported thermal switches are passive, meaning they work solely based on indoor and outdoor temperatures. A single switch when inserted into 10 × 10-in (0.064-m 2 ) XPS foam board insulation demonstrates effective thermal conductivity of 0.050 W/m-K in the resistive state and 0.285 W/m-K in the conductive state. Thermal switches exhibit an effective switching ratio of 5.7, with no noticeable degradation in performance over 770 cycles. Additionally, when integrated into a wall sample containing a PCM layer, switches significantly reduce the PCM solidification time by 43.2% during the cooling process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Thermal Activation of Zirconium(IV) Acetylacetonate Catalysts to Enhance Polyurethane Synthesis and Reprocessing

Carbamate formation and exchange catalysts enable efficient polyurethane (PU) manufacturing, as well as emerging recycling and reprocessing methods for PU thermosets. Zirconium β-diketonate complexes, such as Zr acetylacetonate [Zr(acac) 4 ], are effective alternatives to toxic organotin catalysts that have been used for PU reprocessing. Here, we report that Zr(acac) 4 undergoes a thermally activated process in the PU network during reprocessing that transforms it into a more active carbamate exchange catalyst. This process is associated with the irreversible loss of acetylacetonate ligands and is not observed for the more sterically hindered Zr 2,2,6,6-tetramethyl-3,5-heptanedione [Zr(tmhd) 4 ] complex. Crossover experiments between PU thermoplastics indicated enhanced carbamate exchange after the thermal activation of Zr(acac) 4 in the presence of one of the PUs, whereas a sample of Zr(acac) 4 activated in the absence of the PU had no catalytic activity. Thermal gravimetric analysis suggested that this process is associated with the loss of one protonated acac ligand. Stress relaxation analysis of PU thermosets indicated a distinct change in the characteristic relaxation time associated with the thermal activation of Zr(acac) 4 at temperatures above 140 °C; no such change was observed for samples reprocessed using Zr(tmhd) 4 . Density functional theory and molecular experiments suggest that irreversible ligand exchange of acac with alkoxide or carbamate reduces the activation energy for urethane formation and reversion. Furthermore, the Zr(acac) 4 catalyst activated in the presence of a PU’s polyol precursor provided more porous and less dense PU foams compared to those made using the unactivated Zr(acac) 4 catalyst. Furthermore, these findings are important for developing improved PU synthesis and recycling processes. Thermally activating a catalyst during reprocessing may provide more nuanced control of the in-use and reprocessing characteristics of PU thermosets.

Alcohols↗
DOE OSTI2025

Pyrolysis in Molten Salts Converts Plastics into a Mesoporous Electrocatalyst with a High Density of Atomic Fe–N–C Active Site

Upcycling plastic waste into value-added products is a promising strategy for both economic and environmental sustainability. However, achieving control over structure–property correlations during the upcycling process remains challenging. Here, in this study, we investigate the modulation of active site formation during pyrolytic conversion of plastics to carbon by composition-controlled molten salts. Using melamine formaldehyde (MF) foams as a precursor, we demonstrate that their pyrolysis in eutectic chloride molten salts with Fe 2+ , Na + , and K + ions directs the carbonization process toward the formation of mesoporous functional carbon enriched with atomically dispersed Fe–N–C sites, which are well-known for their catalytic activity in oxygen reduction reaction (ORR). Compared to pyrolysis in the FeCl 2 -only salt, the incorporation of alkali metal ions (Na + , K + ) in the eutectic mixture facilitates nitrogen retention in the carbon matrix and modulates iron speciation. This synergistic environment promotes a higher density and more uniform dispersion of Fe–N–C moieties within the carbon matrix. Consequently, the resulting catalyst exhibits a high surface area, hierarchical porosity, and improved electrochemical properties. When tested as an ORR catalyst, the Fe–N–C-enriched catalyst delivers a high half-wave potential (E 1/2 = 0.875 V vs RHE) with nearly exclusive 4e – pathway. These properties are comparable to those of commercial Pt/C catalysts, along with improved stability.

Fe−N−C active sites↗
DOE OSTI2026

Biopolymer-Templated Titania Film Formation for Nanostructured Coatings Revealed by Machine Learning-Supported Time-Resolved Analysis

This study presents a machine learning approach to derive the film formation of biopolymer-templated titania nanostructures during spray deposition, in combination with in situ grazing-incidence small-angle X-ray scattering (GISAXS). A neural network trained on synthetic GISAXS data directly predicts domain-size distributions from experimental two-dimensional scattering patterns, capturing the full kinetics of nanostructure evolution with high temporal resolution. The predictions reveal hierarchical size distributions and periodic growth features, consistent with layer-by-layer spray deposition and validated by complementary scanning electron microscopy (SEM) imaging. Quantitative comparison with conventional parametric GISAXS fits shows good qualitative agreement, with systematic differences explained by domain-shape assumptions and resolved by applying a geometric scaling factor. Simulated SEM-like surfaces derived from neural network outputs reproduce the porous, foam-like nanoscale morphology observed experimentally, reinforcing the method’s credibility. This integrated approach enables real-time, nondestructive, statistically averaged monitoring of bulk nanostructure development in functional coatings, offering a scalable methodology to accelerate the characterization and process control of sustainably manufactured nanostructured titania films for energy-related applications such as photocatalysis and photovoltaics.

Heger, JulianEliah↗
DOE OSTI2024

Polystyrene Hydrogenolysis to High-Quality Lubricants Using Ni/SiO 2

Pyrolytic and light-activated oxidation processes are leading technologies for utilizing polystyrene (PS) wastes. These approaches exhibit poor selectivities, use complex reactors, and require solvents. Hydrogenolysis is effective for deconstructing polyolefins, but its application to PS feedstocks has been limited. Herein, we demonstrate Ni/SiO 2 catalysts to facilitate PS (M w ≈ 97 kDa) hydrogenolysis to produce lubricant base oils possessing group IV properties, achieving maximum yields of 70% within 6 h at 300 °C and 70 bar of H 2 . Gas, liquid, and oil product yields are stable across reaction conditions, whereas hydrogenation of the PS aromaticity and reduction of the molecular weight benefit from higher temperatures and H 2 pressures. Time-dependent experiments underscore the importance of elevated H 2 pressure, revealing that PS hydrogenolysis occurs sequentially, with aromatic ring hydrogenation preceding degradation of the C–C backbone. Kinetic measurements with 1,2-diphenylethane as a probe molecule demonstrate that ring hydrogenation pis 3 orders of magnitude faster than internal C–C bond cleavage over Ni/SiO 2 . Ni/SiO 2 proves to be effective in the hydrogenolysis of heavier PS polymers and rigid commercial PS products. Conversely, flexibility and foam PS feeds result in Ni/SiO 2 deactivation, attributed to performance additives. Unlike polyolefins, the process produces very little methane and other light hydrocarbons. Furthermore, these findings expand the applicability of hydrogenolysis to PS feedstocks, offering a versatile solution and broadening the range of high-value products from PS to include lubricant base oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Treatment of Lagoon Dairy Manure Wastewater via Iron Electrocoagulation, Microfiltration, and Adsorption

Dairy manure wastewater generated by flushing barn cow waste contains nutrients, pathogens, and organic and inorganic contaminants. This study utilized a process consisting of iron electrocoagulation (Fe-EC), microfiltration (MF), and activated carbon (AC) adsorption to treat farm wastewater and explore the reclamation of clean water for irrigation and livestock consumption. Significant removal (>99.9%) of chemical oxygen demand (COD), total organic carbon (TOC), phosphorus (P), turbidity, and microorganisms, as well as ions including magnesium, calcium, sulfur, and silica was achieved by the combined EC-MF-AC process. Specifically, a charge loading of ∼37,500 C/L in a continuous-flow EC configuration, followed by MF, achieved more than 95% removal of TOC and COD. Characterization of produced flocs and foam via scanning-electron microscopy with energy-dispersal spectroscopy and Fourier transform infrared spectroscopy confirmed the removal of ions, including calcium, sulfur, and silica. A key finding was the electrocatalytic conversion of nitrogen species to ammonia gas through the intermediate reduction of nitrate/nitrite, which led to ∼60% total nitrogen (TN) removal. AC treatment further improved TN removal to ∼70%. The Fe-EC process also eradicated >99.9% of bacteria. Preliminary process cost assessment, based on recycled materials for EC electrodes, showed significant cost savings (∼2 times) compared to commercial electrodes.

Dutta, Swapnamoy [ORNL]↗
DOE OSTI2026

Assessing Structural, Thermal, and Functional Characteristics of Marigold Flower Protein as a Sustainable Food Ingredient

The demand for sustainable and alternative protein sources has been on the rise, driving interest in the valorization of underutilized plants. This study evaluated Calendula officinalis (marigold), a common floral waste, as a sustainable alternative protein source for the food industry. The primary objective of this study was to investigate the physicochemical properties of protein fractions from Calendula officinalis flower to evaluate their potential as a novel protein ingredient. Extraction of the Calendula officinalis flower yielded 92.17% of the crude protein. A sequential extraction of albumin, globulin, glutelin, and prolamin from marigold flower revealed albumin as the dominant fraction (65.47%) and exhibited the highest protein functionality, including water-holding capacity (2.37 g/g), oil-holding capacity (2.49 g/g), and emulsifying capacity (65.22 mL/g). Compared with other protein fractions, glutelin showed a relatively high emulsifying and foaming capacity (EC: 59.13 mL/g; FC: 16.23%). Differential scanning calorimetry revealed high thermal stability for albumin (T p = 105.28 °C) and glutelin (T p = 97.6 °C). Sodium Dodecyl Sulfate–Polyacrylamide Gel Electrophoresis (SDS-PAGE) and Liquid Chromatography–Mass Spectrometry (LC-MS) confirmed the presence of abundant low-molecular-weight polypeptides (<37 kDa), which enhanced emulsification, while scanning electron microscopy revealed porous structures aligned with hydration properties. Antioxidant activity was higher in albumin and glutelin, linked to surface hydrophobicity. LC-MS/MS identified 33 short-chain proteins, including oxidoreductase proteins and lipid-transfer proteins. Findings highlight marigold flower proteins as a sustainable, functional ingredient for a diverse range of food applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Probing Terra Incognita of Ni–P Catalysts: Operando Explorations during Hydrogen Evolution Reaction

We have developed two Ni phosphide preparation methods allowing operando XAS surface-sensitive studies of well-defined bulk systems. For Ni K-edge XAS, a Ni 2 P phase-pure powder was sintered into a high-density pellet and polished for grazing incidence XAS. Ni sites were mildly affected by the acidic electrolyte prior to the HER, while the applied cathodic potential caused the reduction of Ni surface states beyond the states of as-prepared Ni 2 P. The computed fully H-covered Ni 2 P [0001] model describes the difference in the operando Ni K-edge GIXAS spectrum well. Upon turning the applied bias off, the Ni sites became immediately oxidized, forming NiO on the surface. Thus, the active phase during the HER is covalent Ni 0 close to that in the intermetallic phosphides, and Ni 2+ oxides formed after, and not during, the HER. For P K-edge XAS, Ni foam was phosphorized to form a thin Ni 3 P layer while preserving its high surface area. Upon immersion in the acidic electrolyte, the P sites underwent removal of P 5+ phosphates and formed new P coordination, possibly due to the adsorption of protons from the electrolyte. These new P surface states were not affected by turning the cathodic current on and off as soon as the sample was immersed in the acidic electrolyte. However, the removal of the sample from the electrochemical cell and drying in air resulted in substantial depletion and oxidation of surface P. Echoing the observed Ni site chemistry during HER, XAS and XPS suggest that the in situ active P sites are different from the oxidized P states observed under ex situ conditions.

Kong, Seongyoung [Iowa State Univ., Ames, IA (Unit↗
DOE OSTI2025

Active light-controlled frontal ring-opening metathesis polymerization

Frontal ring-opening metathesis polymerization (FROMP) is a promising energy-efficient approach to fabricate polymeric materials. Recent advances have demonstrated FROMP for diverse applications, including additive manufacturing, composites, and foams. However, the characteristic properties of the front are currently controlled primarily by varying the resin composition or the environmental conditions. In this work we present an approach to control FROMP of dicyclopentadiene (DCPD) using photochemical methods. A photobase generator is used to inhibit FROMP of DCPD with UV light while a photosensitizer and co-initiator are used to accelerate FROMP with blue light, enabling orthogonal active photocontrol of front velocity. In addition, photoinhibition-enabled lithographic patterning of frontal polymerizations is demonstrated. Frontal polymerizations are spatially controlled, redirected, and even split into diverging fronts. This work establishes a foundation for advanced control of frontal polymerizations, enabling innovation in traditional and additive manufacturing, as well as emerging processes like morphogenic manufacturing.

Polymer synthesis↗
DOE OSTI2025

Multi-messenger dynamic imaging of laser-driven shocks in water using a plasma wakefield accelerator

Understanding dense matter hydrodynamics is critical for predicting plasma behavior in environments relevant to laser-driven inertial confinement fusion. Traditional diagnostic sources face limitations in brightness, spatiotemporal resolution, and in their ability to detect relevant electromagnetic fields. In this work, we present a dual-probe, multi-messenger laser wakefield accelerator platform combining ultrafast X-rays and relativistic electron beams at 1 Hz, to interrogate a free-flowing water target in vacuum, heated by an intense 200 ps laser pulse. This scheme enables high-repetition-rate tracking the evolution of the interaction using both particle types. Betatron X-rays reveal a cylindrically symmetric shock compression morphology assisted by low-density vapor, resembling foam-layer-assisted fusion targets. The synchronized electron beam detects time-evolving electromagnetic fields, uncovering charge separation and ion species differentiation during plasma expansion – phenomena not captured by photons or hydrodynamic simulations. We show that combining both probes provides complementary insights spanning kinetic to hydrodynamic regimes, highlighting the need for hybrid physics models to accurately predict fusion-relevant plasma behavior.

imaging techniques↗
DOE OSTI2024

A chemo-mechanical model for describing sorption hysteresis in a glassy polyurethane

Abstract Hysteretic sorption and desorption of water is observed from 0 to 95% relative humidity and 298–333 K on a glassy polyurethane foam. It is postulated that sorption-induced swelling of the glassy polyurethane increases the concentration of accessible hydrogen-bonding adsorption sites for water. The accessibility of sites is kinetically controlled due to the restricted thermal motions of chains in the glassy polymer, causing a difference in accessible site concentrations during sorption and desorption. This discrepancy leads to hysteresis in the sorbed concentrations of water. A coupled chemo-mechanical model relating volumetric strain, adsorption site concentration, and sorbed water concentration is employed to describe water sorption hysteresis in the glassy polyurethane. This model not only describes the final mass uptake for each relative humidity step, but also captures the dynamics of water uptake, which exhibit diffusion and relaxation rate-controlled regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chain-length-controllable upcycling of polyolefins to sulfate detergents

Escalating global plastic pollution and the depletion of fossil-based resources underscore the urgent need for innovative end-of-life plastic management strategies in the context of a circular economy. Thermolysis is capable of upcycling end-of-life plastics to intermediate molecules suitable for downstream conversion to eventually high-value chemicals, but tuning the molar mass distribution of the products is challenging. Here, in this study, we report a temperature-gradient thermolysis strategy for the conversion of polyethylene and polypropylene into hydrocarbons with tunable molar mass distributions. The whole thermolysis process is catalyst- and hydrogen-free. The thermolysis of polyethylene and polyethylene/polypropylene mixtures with tailored temperature gradients generated oil with an average chain length of ~C 14 . The oil featured a high concentration of synthetically useful α-olefins. Computational fluid dynamics simulations revealed that regulating the reactor wall temperature was the key to tuning the hydrocarbon distributions. Subsequent oxidation of the obtained α-olefins by sulfuric acid and neutralization by potassium hydroxide afforded sulfate detergents with excellent foaming behaviour and emulsifying capacity and low critical micelle concentration. Overall, this work provides a viable approach to producing value-added chemicals from end-of-life plastics, improving the circularity of the anthropogenic carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Controlling saturation to improve per- and polyfluoroalkyl substance (PFAS) removal in biochar-amended stormwater bioretention systems

Black carbon-amended bioretention systems are an increasingly popular strategy for the removal of organic contaminants, including poly- and perfluoroalkyl substances (PFASs) and other trace organic contaminants (TOrCs), from urban stormwater. Many PFASs preferentially accumulate at the air–water interface, but detention time requirements for stormwater bioretention systems typically result in full saturation of the bioretention systems, effectively removing their air–water interfaces. This study assessed the effect of bioretention system saturation on removal of PFASs, metals, and hydrophilic TOrCs. A field-aged mixture of 40% v/v sand, 30% v/v zeolite, and 30% v/v biochar was packed into columns which were operated with hydraulic controls to remain unsaturated or fully saturated throughout the duration of the experiment. Twenty-four storm events sized to a 95th percentile storm at a California, United States military site were simulated using synthetic stormwater fortified with aqueous film forming foam-derived PFASs, TOrCs, and metals to mimic real-world conditions. Unsaturated conditions outperformed saturated conditions for removal of all PFASs analyzed. A simulated inadvertent system perturbation (i.e. flooding event) in the unsaturated columns did not result in significantly greater mobilization of PFAS mass, suggesting that more sorption to the biochar occurred as a result of the transient retention of PFASs at the air–water interface reducing kinetic sorption limitations. Overall, maintaining unsaturated conditions in a biofilter may extend the sorptive filter lifetime for PFASs by up to 83%. The results have implications for bioretention system application and design for PFAS removal in contaminated catchment areas.

13 HYDRO ENERGY↗
DOE OSTI2024

Epitaxial heterointerfacial electron bridge synchronizes oxygen evolution activity and stability on a layered double hydroxide surface

Scalable green hydrogen production via electrocatalytic water splitting is largely restricted by the insufficient activity and stability of oxygen evolution reaction (OER) catalysts at the anode. As a class of the most active OER catalysts in alkaline electrolyzers, the application of layered double hydroxides (LDHs) remains a main challenge owing to the unstable lattice oxygen dissolution due to the dominant lattice oxygen-involving OER mechanism during long-term operation. Herein, we found that using an epitaxial hetero-interfacing nickel hydroxide (namely Ni(OH) 2 ) as an electron bridge between an active FeCo LDH and Ni foam support to form an LDH*/NFO catalyst, the electronic storage capacity around the Fermi level (-0.5 to +0.5 eV, e-D FE ) sharply increases from 0.93 per cell to 1.51 per cell. Subsequently, we demonstrate that this high e-D FE enables ceaseless and fast power injection into the kinetic process of intermediate species conversion and inhibits lattice oxygen dissolution in the active FeCo LDH. Consequently, it demonstrated a low OER overpotential of 246 mV at a current density of 100 mA cm -2 and ultrahigh stability for up to 3500 hours with an ultraslow overpotential increase rate of 9.4 × 10 -3 mV h -1 . Therefore, we developed an epitaxial hetero-interfacial electron bridging strategy to synchronize the activity and stability of available catalysts for scalable green hydrogen production via electrocatalytic water splitting.

25 ENERGY STORAGE↗
DOE OSTI2025

Aqueous solution degradation pathways of trimethylsiloxane surfactants

Trimethylsiloxane (TriSil) surfactants are promising, environmentally friendly alternatives to per- and polyfluoroalkyl substances (PFAS), which are global recalcitrant and persistent environmental contaminants, in aqueous film-forming fire-fighting foams (AFFF).

Mifkovic, Maleigh [Department of Chemistry, Colora↗
DOE OSTI2024

Radiation and heat transport in divergent shock–bubble interactions

Shock–bubble interactions (SBIs) are important across a wide range of physical systems. In inertial confinement fusion, interactions between laser-driven shocks and micro-voids in both ablators and foam targets generate instabilities that are a major obstacle in achieving ignition. Experiments imaging the collapse of such voids at high energy densities (HED) are constrained by spatial and temporal resolution, making simulations a vital tool in understanding these systems. In this study, we benchmark several radiation and thermal transport models in the xRAGE hydrodynamic code against experimental images of a collapsing mesoscale void during the passage of a 300 GPa shock. We also quantitatively examine the role of transport physics in the evolution of the SBI. This allows us to understand the dynamics of the interaction at timescales shorter than experimental imaging framerates. We find that all radiation models examined reproduce empirical shock velocities within experimental error. Radiation transport is found to reduce shock pressures by providing an additional energy pathway in the ablation region, but this effect is small (∼1% of total shock pressure). Employing a flux-limited Spitzer model for heat conduction, we find that flux limiters between 0.03 and 0.10 produce agreement with experimental velocities, suggesting that the system is well-within the Spitzer regime. Higher heat conduction is found to lower temperatures in the ablated plasma and to prevent secondary shocks at the ablation front, resulting in weaker primary shocks. Finally, we confirm that the SBI-driven instabilities observed in the HED regime are baroclinically driven, as in the low energy case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗