Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREE BOUNDARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

An experimental investigation of nozzle-exit boundary layers of highly heated free jets

An experimental investigation of the effects of nozzle operating conditions on the development of nozzle-exit boundary layers of highly heated air free jets is reported in this paper. The total pressure measurements in the nozzle-exit boundary layer were obtained at a range of jet Mach numbers from 0.1 to 0.97 and jet total temperatures up to 900 K. The analysis of results shows that the nozzle-exit laminar boundary-layer development depends only on the nozzle-exit Reynolds number. For the nozzle-exit turbulent boundary layer, however, it appears that the effects of the jet total temperature on the boundary-layer integral characteristics are independent from the effects of the nozzle-exit Reynolds number. This surprizing finding has not yet been reported. Further, laminar boundary-layer profiles were compared with the Pohlhausen solution for a flat-wall converging channel and an acceptable agreement was found only for low Reynolds numbers. For turbulent boundary layers, the dependence of the shape factor on relative Mach numbers at a distance of one momentum thickness from the nozzle wall resembles Spence's prediction. Finally, the calculated total pressure loss coefficient was found to depend on the nozzle-exit Reynolds number for the laminar nozzle-exit boundary layer, while for the turbulent exit boundary layer this coefficient appears to be constant.

Lepicovsky, J.↗
NASA NTRS1992

Tropospheric and stratospheric wind profiling with a direct detection Doppler lidar

The Space Physics Research Laboratory at the University of Michigan has been operating a direct detection, high resolution Doppler Lidar (HRDL) to measure winds in the boundary layer, free troposphere and lower stratosphere. A direct detection Doppler lidar measures the Doppler shift of the aerosol or Rayleigh backscattered signal, from which the wind velocity vector can be retrieved (Benedetti-Michelangeli et al, 1972, 1974; Chanin et al., 1989; Abreu et al., 1992). The system components are shown. The transmitting system is a Continuum NY-60 Nd:YAG laser frequency doubled to a wavelength of 532 nm. The laser is injection seeded for single line mode operation yielding a linewidth of 0.0045 cm(exp -1) (135 MHz) with excellent shot-to-shot frequency stability. The laser produces 60 mJ pulses and operates at a 50 Hz repetition rate for an effective output power of 3.0 W. A description of the University of Michigan's Doppler lidar is given with examples of wind profiles for the boundary layer, free troposphere, and for the lower stratosphere. The system provides a reliable method of remotely measuring the wind. The wind error is smallest in regions of high aerosols. The system also produces aerosol extinction profiles versus altitude which can be determined by the shape of the spectra. The system has been installed in a trailor so that measurements can be made for field campaigns. Winds and aerosol data are available immediately at the site for use in forecasting.

Abreu, Vincent J.↗
NASA NTRS1972

Free flight determination of boundary layer transition on small scale cones in the presence of surface ablation

To assess the possibility of achieving extensive laminar flow on conical vehicles during hyperbolic entry, the Ames Research Center has had an ongoing program to study boundary-layer transition on ablating cones. Boundary layer transition results are presented from ballistic range experiments with models that ablated at dimensionless mass transfer rates comparable to those expected for full scale flight at speeds up to 17 km/sec. It was found possible to measure the surface recession and hence more accurately identify regions of laminar, transitional, and turbulent flow along generators of the recovered cones. Some preliminary results using this technique are presented.

Wilkins, M. E.↗
NASA NTRS1985

Free vorticity field-boundary layer conversions: Effect of boundary configuration and scale

Progress was made on further flow visualization of vortex-leading edge interaction, in conjunction with characterization of the unsteady pressure field. The range of scale of an elliptical leading edge, relative to the incident primary vortex, was determined. The scale of the incident vortex was characterized in terms of mean shear layer parameters. An overview of the interaction mechanism for the range of thin to thick leading-edges is given. The interaction mechanism corresponding to the case where the incident vortex is above the leading-edge is given for hydrogen bubble wires well upstream of and at the tip of the leading edge. A sample of the instantaneous pressure distribution for the case where the incident vortex dives beneath the edge is presented. The effect of scale of the incident vortex relative to that of the leading-edge was examined. The circulation and length scale of the incident vortices in the street are being characterized.

Rockwell, D.↗
NASA NTRS1983

Use of long-lived radon daughters as indicators of exchange between the free troposphere and the marine boundary layer

Fluxes and exchange coefficients are derived for the transport of Sr-90, Pb-210, Bi-210, and Po-210 between the free troposphere and the marine boundary layer and between the boundary layer and the sea surface. Radionuclide concentrations previously measured near Hawaii are used in the derivations. Values obtained for the free troposphere/boundary layer exchange coefficient (expressed as a piston velocity) were 185, 228 and 203 m/d for Pb-210, Bi-210, and Sr-90, respectively. The magnitude of the local sea-surface source of Po-210 is also determined.

Kritz, M. A.↗
NASA NTRS1987

Measurements of the free stream fluctuations above a turbulent boundary layer

This paper investigates the velocity fluctuations in the free stream above an incompressible turbulent boundary layer developing at constant pressure. It is assumed that the fluctuations receive contributions from three statistically independent sources: (1) one-dimensional unsteadiness, (2) free stream turbulence, and (3) the potential motion induced by the turbulent boundary layer. Measurements were made in a wind tunnel with a root-mean-square level of the axial velocity fluctuations of about 0.2 percent. All three velocity components were measured using an X-wire probe. The unsteadiness was determined from the spanwise covariance of the axial velocity, measured using two single wire probes. The results show that it is possible to separate the contributions to the r.m.s. level of the velocity fluctuations, without resorting to the dubious technique of high-pass filtering. The separation could be extended to the spectral densities of the contributions, if measurements of sufficient accuracy were available. The Appendix provides a general guide for the measurement of small free stream fluctuation levels.

Wood, David H.↗
NASA NTRS1991

The thermal stability of coronal loops - Numerical simulations

The radiative stability of thermally isolated coronal loops with free-flow boundary conditions by nonlinear numerical simulation are studied. A chromosphere-to-corona loop equilibrium (including the option of a deep chromosphere) is first established by following the nonlinear evolution from an initial isothermal state with rigid boundaries. The end conditions are then changed, to allow free flow and to fix the temperature, and investigate the response to nonisobaric perturbations. Within a family of loops of the same pressure, long hot loops to be stable and short cool loops to be unstable to the thermal chromospheric-expansion mode are found. The stable cases remain so, even when long chromospheric ends and/or gravity are added. In those cases which are unstable, the subsequent nonlinear evolution which exhibits swelling of the chromosphere until the entire loop becomes cool and dense are followed.

Mok, Y.↗
NASA NTRS1993

Phase transitions and 2D spherical convection in a large icy satellite

Three ice phase transitions, based on experimental and theoretical results, were incorporated into a 2D spherical convection model. These phase transitions are the exothermic Ice 1-2, the endothermic Ice 2-6, and the exothermic Ice 6-8 phase transitions. The fluid is assumed isoviscous and the anelastic liquid formulation was used. The object is an icy satellite whose physical characteristics resemble those of Ganymede or Callisto. Structural models, similar to those of Mueller and McKinnon, with different core sizes, i.e. with different degree of differentiation were studied. The shells, i.e. the mantle of the satellite, is heated both internally and from below to account for the decaying radiogenic heating and the heat flow from the solid core. The lower boundary of the mantle is rigid and isothermal, the upper boundary is isothermal. Calculations with rigid and shear stress free upper boundary are carried out in order to assess the role of the different boundary conditions. Two different Rayleigh numbers, depending on the assumed value of the viscosity, were used in the calculations and the thermal evolution of the satellite was studied. The suit of calculations presented demonstrates that phase transition cannot be ignored when the thermal evolution of a large icy satellite has to be studied. The importance of the construction of the realistic phase diagram for ice was also documented. On the other hand the degree of differentiation, simulated with the structures with different core's radius does not seem to drastically influence the overall behavior of the convective activity. Within the limits of our simulations, the post-accretional evolution seems to be independent on the degree of primordial differentiation.

Forni, O.↗
NASA NTRS1995

On the Use of Linearized Euler Equations in the Prediction of Jet Noise

Linearized Euler equations are used to simulate supersonic jet noise generation and propagation. Special attention is given to boundary treatment. The resulting solution is stable and nearly free from boundary reflections without the need for artificial dissipation, filtering, or a sponge layer. The computed solution is in good agreement with theory and observation and is much less CPU-intensive as compared to large-eddy simulations.

Mankbadi, Reda R.↗
NASA NTRS1997

Numerical Simulation of the Effect of Heating on Supersonic Jet Noise

The axisymmetric linearized Euler equations are used to simulate noise amplification and radiation from a supersonic jet. The effect of heating on the noise field of the jet is studied and compared to experimental results. Special attention was given to boundary treatment, and the resulting solution is stable and nearly free from boundary reflections.

Hixon, R.↗
NASA NTRS1988

Measurements of the Free-Stream Fluctuations above a Turbulent Boundary Layer

In this paper an investigation of the velocity fluctuations in the free stream above an incompressible turbulent boundary layer developing at constant pressure is described. It is assumed that the fluctuations receive contributions from three statistically independent sources: (1) one-dimensional unsteadiness, (2) free-stream turbulence, and (3) the irrotational motion induced by the turbulent boundary layer. Measurements were made in a wind tunnel with a root-mean-square level of the axial velocity fluctuations of about 0.2%. All three velocity components were measured using an X-wire probe. The unsteadiness was determined from the spanwise covariance of the axial velocity fluctuations, measured using two single-wire probes. The results show that it is possible to separate the contributions to the rms level of the velocity fluctuations without resorting to the dubious technique of high-pass filtering. This separation could be extended to the spectral densities of the contributions if measurements of sufficient accuracy were available.

Wood, D. H.↗
NASA NTRS2019

Modal Testing of a Flexible Wing on a Dynamically Active Test Fixture Using Fixed Base Correction Method - IFASD 2019

In modal testing and finite element model correlation, analysts desire modal results using free-free or rigid boundary conditions to ease comparisons of test versus analytical data. It is often expensive both in cost and schedule to build and test with boundary conditions that replicate the free-free or rigid boundaries. Static test fixtures for load testing are often large, heavy, and unyielding, but do not provide adequate boundaries for modal tests because they are dynamically too flexible and often contain natural frequencies within the test article frequency range of interest. The dynamic coupling between the test article and test fixture complicates the model updating process because significant effort needs to be spent on modeling the test fixture and boundary conditions in addition to the test article. If the modal results could be corrected for fixture coupling, then setups used for other structural testing could be adequate for modal testing and would allow significant schedule and cost savings by eliminating a unique setup for only modal testing. To simplify future modal tests, this paper reports on a fixed base correction method that was investigated during modal testing of a full-scale, half-span, flexible wing cantilevered from a static test fixture. The results of this fixed base correction approach look very promising. The method aided in producing similar wing modal characteristics for two different physical boundary configurations of a dynamically active test fixture.

modal testing↗
NASA NTRS2020

Passive Aeroelastic Tailored Wing Modal Test Using the Fixed Base Correction Method

In modal testing and finite element model correlation, analysts desire modal results using free-free or rigid boundary conditions to ease comparisons of test versus analytical data. It is often expensive both in cost and schedule to build and test with boundary conditions that replicate the free-free or rigid boundaries. Static test fixtures for load testing are often large, heavy, and unyielding, but do not provide adequate boundaries for modal tests because they are dynamically too flexible and often contain natural frequencies within the frequency range of interest of the test article. Dynamic coupling between the test article and test fixture complicates the model updating process because significant effort is required to model the test fixture and boundary conditions in addition to the test article. If there were a way to correct the modal results for fixture coupling, then setups used for other structural testing could be adequate for modal testing. In the case described in this paper, a partial static loads testing setup was used, which allowed significant schedule and cost savings by eliminating a unique setup for a modal test. A fixed base correction technique was investigated during modal testing of a flexible wing cantilevered from part of a static test fixture. The technique was successfully used to measure the wing modes de-coupled from the dynamically active test fixture. The technique is promising for future aircraft applications, but more research is needed.

structural dynamics↗
NASA NTRS2021

Modal Testing of a Flexible Wing on a Dynamically Active Test Fixture Using the Fixed Base Correction Method

In modal testing and finite element model correlation, analysts desire modal results using free-free or rigid boundary conditions to ease comparisons of test versus analytical data. It is often expensive both in cost and schedule to build and test with boundary conditions that replicate the free-free or rigid boundaries. Static test fixtures for load testing are often large, heavy, and unyielding, and not provide adequate boundaries for modal tests because they are dynamically too flexible and often contain natural frequencies within the test article frequency range of interest. The dynamic coupling between the test article and test fixture complicates the model updating process because significant effort needs to be spent on modeling the test fixture and boundary conditions in addition to the test article. If the modal results could be corrected for fixture coupling, then setups used for other structural testing could be adequate for modal testing and would allow significant schedule and cost savings by eliminating a unique setup for only modal testing. To simplify future modal tests, this report describes a Fixed Base Correction method that was investigated during modal testing of a full-scale, half-span, flexible wing cantilevered from a static test fixture. The results of this Fixed Base Correction approach look very promising. The method aided in producing similar wing modal characteristics for two different physical boundary configurations of a dynamically active test fixture.

Natalie D Spivey↗