Results for “FUN3D” — Page 10

NASA NTRS2010

TPSAS-NF1676L-10770-DND

An unstructured grid flow solver, FUN3D has been used for simulation of unsteady flow on a partially dressed nose landing gear with closed cavities. Results obtained from an hybrid RANS/LES and delayed DES turbulence models are presented. Solutions have been obtained for a series of successively finer grids to quantify the effect of grid refinement. Computed surface pressures and perturbation pressures, and flow quantities in selected planes are compared with the experimental data. The power spectral density at several locations is also compared with the measured data. Overall agreement of FUN3D results with the experimental data is encouraging and the correlation with the measured data generally improves with grid refinement.

Veer N Vatsa↗

NASA NTRSDate not supplied

Implicit Thermochemical Nonequilibrium Flow Simulations on Unstructured Grids using GPUs

Thermochemical nonequilibrium flow simulation capabilities have been previously implemented, verified, and validated for central processing unit (CPU) systems in NASA’s unstructured-grid computational fluid dynamics solver FUN3D. Many exascale-class high-performance computing systems will rely on graphics processing unit (GPU) architectures for high throughput and energy efficiency; thus, CPU-based scientific computing software unable to effectively utilize these systems must be updated. In this work, we present a CUDA C++ implementation of FUN3D’s thermochemical nonequilibrium flow simulation capabilities targeting NVIDIA Tesla GPUs. An overview of the porting and optimization strategy is described and performance comparisons with other recent architectures are presented. Scaling to thousands of GPUs is demonstrated, yielding computational performance equivalent to that of several million CPU cores. The implementation enables efficient, high-fidelity, scale-resolving simulations of thermochemical nonequilibrium flows for many applications including atmospheric entry, hypersonics, and combustion.

GPU↗

NASA NTRSDate not supplied

Multi-point Jig Twist Optimization of Mach 0.745 Transonic Truss-Braced Wing Aircraft and High-Fidelity CFD Validation

This paper presents a multi-point jig twist optimization study of the Mach 0.745 Transonic Truss-Braced Wing (TTBW) aircraft using an in-house developed aero-structural analysis solver VSPAERO coupled to BEAM3D. A vortex-lattice model of the TTBW model is developed, and a transonic small disturbance /integral boundary layer correction method is implemented in the VSPAERO model to account for transonic and viscous flow effects. A correction method for the wing-strut interference aerodynamics is developed and applied to the VSPAERO solver. Also, a structural dynamic finite-element model of the TTBW aircraft is developed. This finite-element model includes the geometric nonlinear effect due to the tension in the struts which causes a deflection-dependent nonlinear stiffness. The VSPAERO model is coupled to the corresponding finite-element model to provide a rapid aero-structural analysis. The VSPAERO model has been validated against wind tunnel test data and FUN3D CFD simulation data. Three different flight conditions corresponding to Mach 0.745 at 40,000 ft are selected for the TTBW aircraft jig twist optimization to reduce the drag coefficients at the design and off-design cruise lift coefficients. The preliminary optimization results show that the TTBW aircraft with the optimized jig twist achieves a drag reduction of about 9 counts, 7 counts, and8 counts corresponding to the lift coefficients 0.68, 0.73, and 0.78, respectively. A high-fidelity CFD solver FUN3D is used to validate the jig twist optimization.

Multi-point↗

NASA NTRSDate not supplied

Multiscale Mesh Adaptation for Transonic Aeroelastic Flutter Problems

This work applies multiscale mesh adaptation with refine to reduce spatial discretization error of aeroelastic computational fluid dynamics (CFD) simulations. Benchmark flutter models, such as the pitch and plunge NACA64A-010 airfoil and the benchmark supercritical wing, are studied with both a linearized frequency-domain solver and time-marching CFD coupled to a modal structural solver in FUN3D. The undeformed NASA Common Research Model (CRM), an aeroelastic jig shape variant of the CRM, is also studied with the linearized frequency-domain approach. For these cases, the adaptation process converges to comparable flutter predictions to hand-generated meshes but with smaller node counts. However the additional disciplines of the linearized frequency-domain analysis, the mesh deformation, and the unsteady finite-volume solver create robustness challenges that need to be addressed before it can be applied as a fully automated process for complex transonic aeroelastic problems. In particular, negative volumes are observed to be an issue for FUN3D’s linear elasticity mesh deformation solver when moving the adapted meshes.

Aeroelasticity↗

NASA NTRSDate not supplied

CFD-Based Frequency Domain Method for Dynamic Stability Derivative Estimation with Application to Transonic Truss-Braced Wing

This paper presents a dynamic stability estimation technique obtained from high-fidelity CFD simulations of the Mach 0.8 Transonic Truss-Braced Wing (TTBW). A series of unsteady RANS CFD simulations in FUN3D is performed on the TTBW in pitch and plunge oscillations at various reduced frequencies. The time-domain data are transformed into the frequency-domain data by Fourier series. Transfer functions of the dynamic stability derivatives are then estimated by a frequency-domain regression. The dynamic stability derivatives with respect to the angle of attack are determined by the regression of the unsteady aerodynamic coefficients for the plunge motion. The dynamic stability derivatives with respect to the pitch rate are deter-mined by the regression of the differential unsteady aerodynamic coefficients for the pitch motion upon the removal of the angle of attack contribution by the plunge motion. The steady-state stability derivatives are then compared to the results obtained from a stability analysis code VSPAERO as well as steady-state FUN3D simulations. The comparison of the steady-state stability derivatives shows excellent agreement.

Dynamic Stability Derivatives↗

NASA NTRSDate not supplied

Jig Twist Optimization of Mach 0.8 Transonic Truss-Braced Wing Aircraft

This paper presents a jig twist optimization study of Mach 0.8 Transonic Truss-Braced Wing (TTBW) aircraft using FUN3D. The solver has been validated against wind tunnel test data. An aeroelastic model deformation correction method is developed for the wind tunnel model to improve the validation. The flight condition corresponding to Mach 0.8 and design lift coefficient 0.695 is selected for the TTBW aircraft jig twist optimization to reduce the drag coefficient. The static aeroelastic simulation module in FUN3D is used for the aeroelastic simulation. Three different orders of the Chebyshev polynomials are used as shape function to represent the variations of the jig twist distribution along the wing span. The preliminary optimization results show that the Mach 0.8 TTBW aircraft with the optimized jig twist achieves a drag reduction of about 5.7 counts at the design condition when 5 𝑡ℎ order Chebyshev polynomials are used as shape function.

TTBW↗

NASA NTRSDate not supplied

Numerical Simulation of An Aspect Ratio 13.5 Common Research Model with Trailing Edge Mini-Flaps

This paper presents an aeroelastic modeling study of an aspect ratio 13.5 wind tunnel scale Common Research Model (CRM) with trailing edge mini-flaps. FUN3D is used for the aeroelastic steady and unsteady simulations at Mach 0.85 and dynamic pressure 230 psf. The aeroelastic simulation results are compared with the in-house developed VSPAERO aeroelastic model results. The incremental aerodynamic coefficients predicted by FUN3D and VSPAERO are close except when the mini-flap deflection angle is 10˚. The control reversal behavior is observed for the wing tip mini-flap. A series of dynamic pressure sweep simulations are performed to determine the control reversal onset point. Unsteady simulation results show that there is no buffet phenomenon observed at angle of attacks 0˚ and 2˚ when the mini-flap is deflected 10˚. The mini-flap oscillation simulations show the nonlinear behavior appears when the deflection angle is about 4˚.

Mini-flap↗

NASA NTRSDate not supplied

An Overset Grid Motion Driver for Resolving Entry Vehicle CFD Simulations with Large Changes in Wake Orientation

Time-accurate computational fluid dynamics (CFD) simulations using overset meshes can enable reduced computational cost compared to a rigid, monolithic mesh for blunt-body atmospheric entry vehicles. If the vehicle has a significant change in attitude, the high-density region of the overset mesh designed for resolving the subsonic wake can be kept in position as the wake orientation changes relative to the body. Current simulations generally keep the wake mesh fixed in attitude while the body rotates, assuming the wake orientation remains relatively constant. However, changes in the relative velocity over a long-duration simulation or effects of the body geometry can invalidate this assumption. This work presents a method for calculating the desired mesh orientation to resolve a blunt body wake using the atmosphere-relative velocity of the vehicle. A motion driver using these calculations is implemented in a CFD-in-the-loop flight model bridging the FUN3D flow solver and POST2 trajectory propagator. Overset meshing is performed using the Yoga extension for FUN3D. Results are presented for simulations with both overset and monolithic meshes under large changes in relative velocity (and therefore wake orientation). The results demonstrate that the motion driver successfully orients an overset wake mesh to capture the subsonic wake with sufficient resolution despite variable body rotation and body-relative freestream velocity.

CFD↗

NASA NTRSDate not supplied

Uncertainty Modeling for Mars Ascent Vehicle’s Aerodatabase Development

The design of the Mars Ascent Vehicle - Mars Sample Return (MAV-MSR) trajectories requires an accurate assessment of flight performance. Typically, these trajectories are developed by flight mechanics analysis to meet complex mission requirements and then flight performance assessed through Monte Carlo simulations. Consequently, it is crucial to develop an aerodynamic aerodatabase as an input model for flight mechanics analysis to provide static and dynamic force and moment coefficients under specific flight conditions. The force and moment coefficients in the MAV aerodatabase are determined using the FUN3D computational fluid dynamics solver. Firstly, an overview of the aerodatabase is presented to demonstrate its applicability to trajectory-defined simulations. This effort is followed by an initial attempt to quantify uncertainties in the force and moment coefficients necessary for updating the current aerodatabase. The uncertainty model identifies uncertainty adders and multipliers for coefficient-based forces and moments through a direct comparison between FUN3D and wind tunnel test data from NASA Marshall Space Center's 14x14 inch Trisonic Wind Tunnel. These uncertainties aim to encompass various changes in Mach number, angle of attack, and aerodynamic roll angle.

Uncertainty analysis↗

NASA NTRSDate not supplied

An Overset Grid Motion Driver for Resolving Entry Vehicle CFD Simulations with Large Changes in Wake Orientation

Time-accurate computational fluid dynamics (CFD) simulations using overset meshes can enable reduced computational cost compared to a rigid, monolithic mesh for blunt-body atmospheric entry vehicles. If the vehicle has a significant change in attitude, the high-density region of the overset mesh designed for resolving the subsonic wake can be kept in position as the wake orientation changes relative to the body. Current simulations generally keep the wake mesh fixed in attitude while the body rotates, assuming the wake orientation remains relatively constant. However, changes in the relative velocity over a long-duration simulation or effects of the body geometry can invalidate this assumption. This work presents a method for calculating the desired mesh orientation to resolve a blunt body wake using the atmosphere-relative velocity of the vehicle. A motion driver using these calculations is implemented in a CFD-in-the-loop flight model bridging the FUN3D flow solver and POST2 trajectory propagator. Overset meshing is performed using the Yoga extension for FUN3D. Results are presented for simulations with both overset and monolithic meshes under large changes in relative velocity (and therefore wake orientation). The results demonstrate that the motion driver successfully orients an overset wake mesh to capture the subsonic wake with sufficient resolution despite variable body rotation and body-relative freestream velocity.

Computational Fluid Dynamics↗

NASA NTRSDate not supplied

Assessment of UMUSCL Scheme for DNS of Turbulent Flows

Direct Numerical Simulations (DNS) are performed using the FUN3D code ( https://fun3d.larc.nasa.gov) for three validation cases: (1) flow through a plane channel, (2) flow through a channel with a constriction, and (3) flow over a flat plate. FUN3D is a node-centered finite-volume code developed at the NASA Langley Research Center that solves the three-dimensional compressible Navier-Stokes equations on unstructured computational grids. The simulations are performed employing the 2nd-order unstructured monotonic upstream scheme for conservation laws (UMUSCL). The results are compared with available experimental and numerical data. The effect of the UMUSCL reconstruction parameter (κ) is assessed, and the results indicate that κ = 0.9 yields satisfactory results in terms of accuracy and robustness compared to available data. Further analyses of the results, along with additional test cases and grids will be presented in the final manuscript.

Direct Numerical Simulation↗

NASA NTRSDate not supplied

Uncertainty Modeling for Mars Ascent Vehicle’s Aerodynamic Database Development

The design of the Mars Ascent Vehicle - Mars Sample Return (MAV-MSR) trajectories requires an accurate assessment of flight performance. Typically, these trajectories are developed by flight mechanics analysis to meet complex mission requirements and then flight performance assessed through Monte Carlo simulations. Consequently, it is crucial to develop an aerodynamic aerodatabase as an input model for flight mechanics analysis to provide static and dynamic force and moment coefficients under specific flight conditions. The force and moment coefficients in the MAV aerodatabase are determined using the FUN3D computational fluid dynamics solver. Firstly, an overview of the aerodatabase is presented to demonstrate its applicability to trajectory-defined simulations. This effort is followed by an initial attempt to quantify uncertainties in the force and moment coefficients necessary for updating the current aerodatabase. The uncertainty model identifies uncertainty adders and multipliers for coefficient-based forces and moments through a direct comparison between FUN3D and wind tunnel test data from NASA Marshall Space Center's 14x14 inch Trisonic Wind Tunnel. These uncertainties aim to encompass various changes in Mach number, angle of attack, and aerodynamic roll angle.

Uncertainty analysis↗

NASA NTRSDate not supplied

Classical Flutter Analysis of X-57 Aircraft Mod II, III, and IV Configurations

To support airworthiness assessment of the X-57 electric propulsion demonstrator aircraft, the National Aeronautics and Space Administration (NASA) completed classical flutter analysis of the Mod II, Mod III, and Mod IV aircraft configurations. Aeroelastic analysis was primarily performed using the ZAERO analysis code developed by Zona Technology. Supplemental computational fluid dynamics (CFD) flutter analysis for the Mod III and Mod IV configurations was performed using NASA’s FUN3D software to verify the aeroelastic behavior at deployed flaps conditions. The NASTRAN finite element models (FEMs) used for aeroelastic analysis were developed by NASA. The final Mod II FEM utilized shell elements for the wing and fuselage, and beam elements for the tail and wing control surfaces. For Mod III and Mod IV aircraft models, shell element wing FEMs developed throughout the Mod III/IV wing design cycle were utilized. The fuselage and empennage FEM components were shared between the Mod II, III, and IV aircraft models. ZAERO analyses predicted flutter boundaries were >60% beyond the X-57 flight-test envelope never exceed airspeed (V NE ) for all configurations. Aeroelastic Reynolds-averaged Navier–Stokes (RANS) CFD simulations using FUN3D of the Mod III/IV configurations predicted flap mode instability did not occur until at least speeds of 60% higher than the Mod III/IV maximum flap deployment airspeed (V FE ).

Keerti K. Bhamidipati↗

NASA NTRSDate not supplied

Aerothermodynamic Analysis of a Flexible Thermal Protection System under Reentry Loads

The Carryall Block 1 reentry vehicle being developed by Outpost Space utilizes a strut supported semirigid deployable heatshield. This consists of a flexible thermal protection system, a heat-resistant fabric stack, stretched over actuated spars. The advantages of a deployable heatshield include reduced heat loading and earlier deceleration in the trajectory. However, the nature of the flexible thermal protection system necessitates considering the loaded shape of the heat shield. The flexible thermal protection system will deflect under reentry loads leading to areas of higher heating rates as well as a reduced axial coefficient as compared to the nominal shape. The Carryall Block 1 is analyzed using NASA’s FUN3D and DPLR CFD solvers with a deflected shape based on the catenary equations. The aerodynamic results are found to be within a percent for both solvers and both structured and unstructured mesh types. Fluid Structure Interaction (FSI) analysis is currently a work in progress, using file I/O to communicate between FUN3D and LS-DYNA, a commercial nonlinear structural solver. Challenges in deforming the geometry, mesh, and initial results are presented here.

thermal protection system↗

NASA NTRS2011

An Overview of Ares-I CFD Ascent Aerodynamic Data Development And Analysis Based on USM3D

An overview of the computational results obtained from the NASA Langley developed unstructured grid, Reynolds-averaged Navier-Stokes flow solver USM3D, in support of the Ares-I project within the NASA s Constellation program, are presented. The numerical data are obtained for representative flow conditions pertinent to the ascent phase of the trajectory at both wind tunnel and flight Reynolds number without including any propulsion effects. The USM3D flow solver has been designated to have the primary role within the Ares-I project in developing the computational aerodynamic data for the vehicle while other flow solvers, namely OVERFLOW and FUN3D, have supporting roles to provide complementary results for fewer cases as part of the verification process to ensure code-to-code solution consistency. Similarly, as part of the solution validation efforts, the predicted numerical results are correlated with the aerodynamic wind tunnel data that have been generated within the project in the past few years. Sample aerodynamic results and the processes established for the computational solution/data development for the evolving Ares-I design cycles are presented.

FUN3D↗

NASA NTRS2019

Comparison of Space Launch System Aerodynamic Surface Pressure Measurements from Experimental Testing and CFD

A comparison of surface pressure coefficient measurements obtained using pressure-sensitive paint (PSP) measurements with predictions from the computational fluid dynamics (CFD) code FUN3D is presented for the NASA SLS Block 1B crew vehicle. Overall, the flow features over the SLS configuration were captured by both the PSP data and CFD data at freestream Mach numbers (M(sub ∞)) of 0.8 and 1.3. Overall, the flow features over the SLS are captured by the PSP data but the intensities of large pressure gradients are less intense than what was predicted by the CFD data. Several examples of this observation are given including the flow interaction at the booster nose cone edge, core body, and forward booster attachment hardware at M(sub ∞) = 0.8.

FUN3D↗

NASA NTRS2020

Unstructured Grid Development for the Space Launch System Liftoff and Transition Lineloads Computational Analysis

Production of aerodynamic lineloads databases for the Space Launch System (SLS) vehicle at Liftoff and Transition (LOT) conditions has required the development of a Computational Fluid Dynamics (CFD) workflow capable of producing high-quality solutions for this unique phase of flight. Aerodynamic considerations included a wide range of flow angles (from 0°up to 90°total angle of attack), resulting leeside separation, and interaction effects between the three bodies of the integrated SLS vehicle, as well as the nearby launch tower. Computational mesh development for similar problems at the NASA Langley Research Center (such as for the Constellation/Ares launch vehicles) has primarily relied on in-house tools such as VGRID/POSTGRID, with grids designed for NASA-developed and maintained flow solvers such as USM3D and FUN3D. The workflow for such problems has evolved over the development of the various SLS configurations to incorporate new tools such as the Heldenpatch/Heldenmesh grid generator (Helden Aerospace) and CREATE-AV Kestrel (US Department of Defense) flow solver. This paper describes efforts to benchmark a grid generation approach for LOT problems using Heldenpatch/Heldenmesh and Kestrel, verified against prior best practices from VGRID/POSTGRID. Parameters studied include surface grid density, first-layer viscous cell height, and volume grid growth rate parameters. Resulting solutions are compared based on total force and moment values, sectional line loads, and surface pressures, all validated against existing wind tunnel aerodynamic databases where available for the SLS Block 1B Cargo configuration.

Space launch systems↗

NASA NTRSDate not supplied

Optimization of a Parametric Lobe Mixer for Internally Mixed Nozzles

The results of the first phase of an optimization study on a parametric procedurally-generated lobe mixer are presented. This mixer is part of a dual-stream plug nozzle system, designed under NASA’s CST project for use in near-term commercial supersonic applications. Data was obtained numerically using NASA’s in-house CFD code FUN3D and analyzed to determine mixer performance. Phase I of the study examined five independently-variable geometric parameters describing the lobe mixer. Methods of Design of Experiments (DoE) were used to obtain a parametric model to quickly evaluate mixer performance and determine an optimum configuration. Mixers that induced strong axial vorticity and shear layers without causing flow separation were found to perform best, with exit temperature variance highly inversely correlated to mixing effectiveness.

Lobe Mixer↗