Search NASA⌕ Search

SEARCH · Search NASA

Results for “Factor Analysis, Statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A Monte Carlo Technique to Estimate Emissions from R&D Facilities

The Pacific Northwest National Laboratory (PNNL) operates multidisciplinary laboratory Research and Development (R&D) facilities for the U. S. Department of Energy and sampled air chemical emissions from some of these facilities from 1998 until 2008. Although sampling was not required for environmental compliance, PNNL conducted sampling to provide data to compare estimated release fractions to those used for emissions estimates and to verify that methods used to determine compliance with air regulations and permits conservatively predict actual emissions. Sampling also identifies and quantifies air toxics emitted to compare with compliance limits established by the State. The sampling data provides a unique opportunity to quantify emissions and investigate factors potentially impacting emissions. Previous work using this data set include a paper by Woodruff, Benar, and McCarthy1 who summarized the compliance approach used by PNNL and described sampling and analytical measurements for the first sampling campaigns. Conclusions reported in the paper were that none of the measurements of the target compounds exceeded a State acceptable source impact level (ASIL)2 even using significant overestimation factors, and that an average release fraction calculated from the data provided reasonable validation of the factor used in compliance assessments. Other reports using the data include the following: • A metric was developed by Ballinger, Duchsherer, and Metoyer3 to compare chemical signatures. The analysis found similarities in chemical signatures from three of the buildings but a markedly different signature from the fourth building. • A method was developed and used on the data to rank the chemical compounds that present the greatest risk to a potential downstream receptor and to determine whether the sampling parameters and detection limits provided sufficient resolution to verify compliance at potential receptor locations.4 • The stack data from one of the buildings was analyzed using a statistical technique called Positive Matrix Factorization (PMF) to identify the number and composition of major contributing sources to measured stack concentrations.5 In this analysis, a method is described that uses a Monte Carlo technique to produce a distribution of emission estimates from the measured data. The method is applied to one of the chemicals previously identified as more significant than others using the ranking process.4 Variations on the method are investigated and compared to determine their effects on the emission estimates.

Laboratory, air chemical emissions, volatile organ↗

Surface pretreatment of plastics with an atmospheric pressure plasma jet - Influence of generator power and kinematics

The industrial use of atmospheric pressure plasmas in the plastics processing industry has increased significantly in recent years. Users of this treatment process have the possibility to influence the target values (e.g. bond strength or surface energy) with the help of kinematic and electrical parameters. Until now, systematic procedures have been used with which the parameters can be adapted to the process or product requirements but only by very time-consuming methods. For this reason, the relationship between influencing values and target values will be examined based on the example of a pretreatment in the bonding process with the help of statistical experimental design. Because of the large number of parameters involved, the analysis is restricted to the kinematic and electrical parameters. In the experimental tests, the following factors are taken as parameters: gap between nozzle and substrate, treatment velocity (kinematic data), voltage and duty cycle (electrical data). The statistical evaluation shows significant relationships between the parameters and surface energy in the case of polypropylene. An increase in the voltage and duty cycle increases the polar proportion of the surface energy, while a larger gap and higher velocity leads to lower energy levels. The bond strength of the overlapping bond is also significantly influenced by the voltage, velocity and gap. The direction of their effects is identical with those of the surface energy. In addition to the kinematic influences of the motion of an atmospheric pressure plasma jet, it is therefore especially important that the parameters for the plasma production are taken into account when designing the pretreatment processes.

36 MATERIALS SCIENCE↗

MARGInS: Model-Based Analysis of Realizable Goals in Systems

Under NASAs Constellation effort, the Exploration Technology Development Program funded research toward a system validation capability that applied machine learning and test-case generation techniques to the analysis of black-box system behavior. The behavior analysis capability scaled to spaces of hundreds of input parameters and tens of thousands of test cases. Aerospace systems at the vehicle level, especially those systems which contain some level of autonomy, are best described by hybrid and non-linear mathematics. Even simplified models of such systems need parameter dimensionalities in the hundreds or thousands of parameters in order to capture sufficient fidelity. The System Safety Assessments (such as those described in the SAE ARP 4761A Safety Assessment Process guidelines) for these systems are prone to errorinteractions between the vehicles subsystems are complex, and can display emergent behaviors. NASA captured this new analysis in the Model-based Analysis of Realizable Goals in Systems (MARGInS) tool and applied it to the Pad Abort 1 (PA-1) simulation as part of the independent validation and verification cycle before the PA-1 flight test in May of 2010. MARGInS evaluated the adherence of the high-fidelity simulation to its requirements, and deter- mined the margins to failure from the expected nominal input conditions. Following the PA-1 test, the capabilities within the MARGInS framework have been extended with sophisticated statistical and white-box test case generation techniques and applied to other NASA missions. The frame- work now includes a critical factors analysis that was applied to NASAs Orion simulation and design. NASAs Aeronautics Research Mission Directorate (ARMD) leveraged the existing MARGInS framework for work on aviation safety for civil transport vehicles and for research on autonomy issues. The NASA ARMD effort created a time series output prediction capability that has been used to characterize trajectories for a plane with an adaptive control system, and a safety boundary detection capability that has been applied to an air traffic control concept of operation for the Federal Aviation Administration. The statistical and machine- learning based techniques within MARGInS have been successfully combined with concolic execution to improve the coverage of a critical unit by driving system-level inputs. The use case driving the concolic execution and MARGInS integration was inspired by the Air France 447 disaster in which the loss of a critical functionality (the airspeed calculation from the pitot tubes) led to loss of the entire plane with the people aboard. To illustrate capabilities and limitations, we will highlight the analyses for the applications listed above. We will then discuss the future plans for MARGInS and its interfaces with other tools.

Validation↗

Cell-Type Specific DNA Methylation Patterns Define Human Breast Cellular Identity

DNA methylation plays a role in a variety of biological processes including embryonic development, imprinting, Xchromosome inactivation, and stem cell differentiation. Tissue specific differential methylation has also been well characterized. We sought to extend these studies to create a map of differential DNA methylation between different cell types derived from a single tissue. Using three pairs of isogenic human mammary epithelial and fibroblast cells, promoter region DNA methylation was characterized using MeDIP coupled to microarray analysis. Comparison of DNA methylation between these cell types revealed nearly three thousand cell-type specific differentially methylated regions (ctDMRs). MassARRAY was performed upon 87 ctDMRs to confirm and quantify differential DNA methylation. Each of the examined regions exhibited statistically significant differences ranging from 10–70%. Gene ontology analysis revealed the overrepresentation of many transcription factors involved in developmental processes. Additionally, we have shown that ctDMRs are associated with histone related epigenetic marks and are often aberrantly methylated in breast cancer. Overall, our data suggest that there are thousands of ctDMRs which consistently exhibit differential DNA methylation and may underlie cell type specificity in human breast tissue. In addition, we describe the pathways affected by these differences and provide insight into the molecular mechanisms and physiological overlap between normal cellular differentiation and breast carcinogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

An Integrated Analysis of the Physiological Effects of Space Flight: Executive Summary

A large array of models were applied in a unified manner to solve problems in space flight physiology. Mathematical simulation was used as an alternative way of looking at physiological systems and maximizing the yield from previous space flight experiments. A medical data analysis system was created which consist of an automated data base, a computerized biostatistical and data analysis system, and a set of simulation models of physiological systems. Five basic models were employed: (1) a pulsatile cardiovascular model; (2) a respiratory model; (3) a thermoregulatory model; (4) a circulatory, fluid, and electrolyte balance model; and (5) an erythropoiesis regulatory model. Algorithms were provided to perform routine statistical tests, multivariate analysis, nonlinear regression analysis, and autocorrelation analysis. Special purpose programs were prepared for rank correlation, factor analysis, and the integration of the metabolic balance data.

Leonard, J. I.↗

Fuel neutralization by ozone oxidation

The viability of a hazardous waste disposal system based on ozone oxidation of hydrazine fuels at low aqueous concentrations in the presence of ultraviolet light (UV at 2.537 x 10(exp -7) m or 8.324 x 10(exp -7) ft) excitation was investigated. Important parameters investigated include temperature, solution pH, and ultraviolet light power. Statistically relevant experimentation was done to estimate main factor effects on performance. The best available chemical analysis technology was used to evaluate the performance of the system.

Swartz, A. B.↗

Shared Mobility Data Availability and Usage Trends

In this report, we summarize data availability of new shared mobility technologies by mobility type and region and analyze how shared mobility usage varies by time and by demographic factors in the United States. The shared mobility technologies include ridehailing from transportation network companies (TNC), bikeshare, and scooter share. There is a wide range in shared mobility usage per capita across the country, even within urban areas. We observe that there was steady growth of new shared mobility usage from 2015 to early 2020, before COVID-19 reduced overall ridership. An analysis focused on Chicago shows that despite the availability of good public transportation, high usage of new shared mobility modes is centered in high income communities, especially by households who own less vehicles. However, we find that TNC is used for first-mile and last-mile in lower income communities. Analysis on the bikeshare usage also shows that household income is shown to not be a statistically significant factor when accounting for other factors including employment density, population density, percentage of college graduates, and bike-lane proximity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Factors Associated With External and Internal Lymphedema in Patients With Head-and-Neck Cancer

Purpose: The purpose of this study was to examine factors associated with the presence of secondary external and internal lymphedema in patients with head-and-neck cancer (HNC). Methods and Materials: The sample included 81 patients {>=}3 months after HNC treatment. Physical and endoscopic examinations were conducted to determine if participants had external, internal, and/or combined head-and-neck lymphedema. Logistic regression analysis was used to examine the factors associated with the presence of lymphedema. Results: The following factors were statistically significantly associated with presence of lymphedema: (1) location of tumor associated with presence of external (P=.009) and combined lymphedema (P=.032); (2) time since end of HNC treatment associated with presence of external (P=.004) and combined lymphedema (P=.005); (3) total dosage of radiation therapy (P=.010) and days of radiation (P=.017) associated with the presence of combined lymphedema; (4) radiation status of surgical bed was associated with the presence of internal lymphedema, including surgery with postoperative radiation (P=.030) and (salvage) surgery in the irradiated field (P=.008); and (5) number of treatment modalities associated with external (P=.002), internal (P=.039), and combined lymphedema (P=.004). No demographic, health behavior-related, or comorbidity factors were associated with the presence of lymphedema in the sample. Conclusions: Select tumor and treatment parameters are associated with increased occurrence of lymphedema in patients with HNC. Larger and longitudinal studies are needed to identify adjusted effects and causative risk factors contributing to the development of lymphedema in patients with HNC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Subjective assessment of simulated helicopter blade-slap noise

The effects of several characteristics of helicopter blade slap upon human annoyance are examined. Blade slap noise was simulated by using continuous and impulsive noises characterized by five parameters: The number of sine waves in a single impulse; the frequency of the sine waves; the impulse repetition frequency; the sound pressure level (SPL) of the continuous noise; and the idealized crest factor of the impulses. Ten second samples of noise were synthesized with each of the five parameters at representative levels. The annoyance of each noise was judged by 40 human subjects. Analysis of the subjective data indicated that each of the five parameters had a statistically significant effect upon the annoyance judgments. The impulse crest factor and SPL of the continuous noise had very strong positive relationships with annoyance. The other parameters had smaller, but still significant, effects upon the annoyance judgments.

Lawton, B. W.↗

Thermal hydraulic limits analysis using statistical propagation of parametric uncertainties

The MIT Research Reactor (MITR) is evaluating the conversion from highly enriched uranium (HEU) to low enrichment uranium (LEU) fuel. In addition to the fuel element re-design, a reactor power upgraded from 6 MW to 7 MW is proposed in order to maintain the same reactor performance of the HEU core. Previous approach in analyzing the impact of engineering uncertainties on thermal hydraulic limits via the use of engineering hot channel factors (EHCFs) was unable to explicitly quantify the uncertainty and confidence level in reactor parameters. The objective of this study is to develop a methodology for MITR thermal hydraulic limits analysis by statistically combining engineering uncertainties with an aim to eliminate unnecessary conservatism inherent in traditional analyses. This method was employed to analyze the Limiting Safety System Settings (LSSS) for the MITR, which is the avoidance of the onset of nucleate boiling (ONB). Key parameters, such as coolant channel tolerances and heat transfer coefficients, were considered as normal distributions using Oracle Crystal Ball to calculate ONB. The LSSS power is determined with 99.7% confidence level. The LSSS power calculated using this new methodology is 9.1 MW, based on core outlet coolant temperature of 60 deg. C, and primary coolant flow rate of 1800 gpm, compared to 8.3 MW obtained from the analytical method using the EHCFs with same operating conditions. The same methodology was also used to calculate the safety limit (SL) for the MITR, conservatively determined using onset of flow instability (OFI) as the criterion, to verify that adequate safety margin exists between LSSS and SL. The calculated SL is 10.6 MW, which is 1.5 MW higher than LSSS. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparison of Treatment Results Between Adult and Juvenile Nasopharyngeal Carcinoma

Purpose: Nasopharyngeal carcinoma (NPC) has a bimodal age distribution. In contrast to the adult variant, little is known about the juvenile form. This study examined the treatment results between adult (aNPC) and juvenile NPC (jNPC) patients for future treatment considerations in jNPC. Methods and Materials: The jNPC population included 53 patients treated at two institutions between 1972 and 2004. The aNPC population included 84 patients treated at one institution. The patients had received a median dose of 66 Gy of external beam radiotherapy and 72% underwent chemotherapy. The mean follow-up for surviving patients was 12.6 years for jNPC and 6.6 years for aNPC. Results: The jNPC patients presented with more advance stages than did the aNPC patients (92% vs. 67% Stage III-IV, p = .006). However, jNPC patients had significantly better overall survival (OS) than did aNPC patients. The 5-year OS rate was 71% for jNPC and 58% for aNPC (p = .03). The jNPC group also demonstrated a trend for greater relapse-free survival than the aNPC group (5-year relapse-free survival rate, 69% vs. 49%; p = .056). The pattern of failure analysis revealed that the jNPC patients had greater locoregional control and freedom from metastasis but the differences were not statistically significant. Univariate analysis for OS revealed that age group, nodal classification, and chemotherapy use were significant prognostic factors. Age group remained significant for OS on multivariate analysis, after adjusting for N classification and treatment. Conclusion: Despite more advance stage at presentation, jNPC patients had better survival than did aNPC patients. Future treatment strategies should take into consideration the long-term complications in these young patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Investigation into the instantaneous centre of rotation for enhanced design of floating offshore wind turbines

The dynamic behaviour of floating offshore wind turbines (FOWTs) involves complex interactions of multivariate loads from wind, waves, and currents, which result in complex motion characteristics. Although methods for analysing global motion responses are well-established, the time- and location-dependent kinematics remain underexplored. This paper investigates the instantaneous centre of rotation (ICR), a point of zero velocity at a time instance of general plane motion. Understanding and strategically positioning the ICR can reduce the dynamic motion in critical structural locations, enhancing the performance and structural robustness of FOWTs. The paper presents a method for computing the ICR using time-domain simulation results and proposes a statistical analysis approach suitable for design studies. Building on prior research, it examines the sensitivity of the ICR to external loading and design features, providing insights into how these factors influence motion response and how the motion response influences the statistics of the ICR, structural loads, and other performance metrics of interest. The study explores two FOWT configurations, a spar and a semisubmersible, identifying design variables that most effectively control the ICR statistics and identifying the ICR statistics most correlated with the responses of interest. Finally, through two case studies, we demonstrate how to apply these new insights in a practical design scenario. By adjusting the design variables most correlated with the ICR (fairlead vertical position and centre of mass for the spar and mooring line length and offset column diameter for the semisubmersible), we successfully modified the designs of the floating support structures to reduce the loads in the mooring lines, tower base, and blade roots, improving the ultimate strength and fatigue characteristics compared to the original designs.

17 WIND ENERGY↗

Prostate Cancer Radiation Therapy and Risk of Thromboembolic Events

Purpose: To investigate the risk of thromboembolic disease (TED) after radiation therapy (RT) with curative intent for prostate cancer (PCa). Patients and Methods: We identified all men who received RT as curative treatment (n=9410) and grouped according to external beam RT (EBRT) or brachytherapy (BT). By comparing with an age- and county-matched comparison cohort of PCa-free men (n=46,826), we investigated risk of TED after RT using Cox proportional hazard regression models. The model was adjusted for tumor characteristics, demographics, comorbidities, PCa treatments, and known risk factors of TED, such as recent surgery and disease progression. Results: Between 2006 and 2013, 6232 men with PCa received EBRT, and 3178 underwent BT. A statistically significant association was found between EBRT and BT and risk of pulmonary embolism in the crude analysis. However, upon adjusting for known TED risk factors these associations disappeared. No significant associations were found between BT or EBRT and deep venous thrombosis. Conclusion: Curative RT for prostate cancer using contemporary methodologies was not associated with an increased risk of TED.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Improving Learning Performance Through Rational Resource Allocation

This article shows how rational analysis can be used to minimize learning cost for a general class of statistical learning problems. We discuss the factors that influence learning cost and show that the problem of efficient learning can be cast as a resource optimization problem. Solutions found in this way can be significantly more efficient than the best solutions that do not account for these factors. We introduce a heuristic learning algorithm that approximately solves this optimization problem and document its performance improvements on synthetic and real-world problems.

resource optimization↗

Detailed Uncertainty Analysis of the ZEM-3 Measurement System

The measurement of Seebeck coefficient and electrical resistivity are critical to the investigation of all thermoelectric systems. Therefore, it stands that the measurement uncertainty must be well understood to report ZT values which are accurate and trustworthy. A detailed uncertainty analysis of the ZEM-3 measurement system has been performed. The uncertainty analysis calculates error in the electrical resistivity measurement as a result of sample geometry tolerance, probe geometry tolerance, statistical error, and multi-meter uncertainty. The uncertainty on Seebeck coefficient includes probe wire correction factors, statistical error, multi-meter uncertainty, and most importantly the cold-finger effect. The cold-finger effect plagues all potentiometric (four-probe) Seebeck measurement systems, as heat parasitically transfers through thermocouple probes. The effect leads to an asymmetric over-estimation of the Seebeck coefficient. A thermal finite element analysis allows for quantification of the phenomenon, and provides an estimate on the uncertainty of the Seebeck coefficient. The thermoelectric power factor has been found to have an uncertainty of +9-14 at high temperature and 9 near room temperature.

Seebeck effect↗

The effects of microstructure on deformation twinning in Mg WE43

The interplay between microstructure and deformation twinning in a WE43-T6 Mg alloy under uniaxial compression was investigated using a combination of scanning electron microscopy with digital image correlation (SEM-DIC) and crystal plasticity finite element (CPFE) simulation. To improve understanding of the statistical characteristics of deformation twin formation, microstructural effects were characterized in over 1000 grains through metrics including the nominal Schmid Factor, grain size, geometric compatibility factor (m'), residual Burgers vector, and the strain accommodated by neighboring grains. There was a strong correlation between the nominal Schmid Factor and both twin activation and variant selection, but this was not fully deterministic. Deformation twinning also exhibited a strong dependence on existing slip and twinning in the neighboring grain and on the m' value. Within the range of grain sizes present in this condition, grain size was determined to have minimal effect on deformation twinning. Finally, statistical analysis of CPFE simulations was used to further investigate microstructural effects on twinning, and qualitatively captured the effect of the nominal Schmid Factor.

36 MATERIALS SCIENCE↗

Machine learning insights into microstructural origins of transport and mechanical properties in porous microstructures

Multifunctional porous materials are increasingly needed across various fields, but their complex microstructures create significant challenges due to the intricate microstructure-property relationships. This complexity, combined with limitations of traditional analysis methods, hinders efforts to understand and optimize microstructure–property relationships. Here, to address this, we integrate physics-based mesoscale modeling with interpretable machine learning (ML) to uncover how microstructural features govern effective diffusivity and elastic modulus. At constant porosity, we show diffusivity varies by over 150 × and modulus by ∼50 ×, highlighting the power of microstructure engineering. Statistical analysis reveals bimodal behavior in diffusivity and unimodal in modulus. ML identifies connectivity as the dominant factor, while modulus is also sensitive to domain size and feature interactions. Controlled simulations further highlight domain shape as a critical feature for modulus. This framework enables efficient exploration of microstructure-property correlations, offering new insights to guide the design of advanced porous materials.

Bicontinuous microstructure↗