Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feedbacks modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Practical robustness measures in multivariable control system analysis

The robustness of the stability of multivariable linear time invariant feedback control systems with respect to model uncertainty is considered using frequency domain criteria. Available robustness tests are unified under a common framework based on the nature and structure of model errors. These results are derived using a multivariable version of Nyquist's stability theorem in which the minimum singular value of the return difference transfer matrix is shown to be the multivariable generalization of the distance to the critical point on a single input, single output Nyquist diagram. Using the return difference transfer matrix, a very general robustness theorem is presented from which all of the robustness tests dealing with specific model errors may be derived. The robustness tests that explicitly utilized model error structure are able to guarantee feedback system stability in the face of model errors of larger magnitude than those robustness tests that do not. The robustness of linear quadratic Gaussian control systems are analyzed.

Lehtomaki, N. A.↗

Design, evaluation and test of an electronic, multivariable control for the F100 turbofan engine

A digital, multivariable control design procedure for the F100 turbofan engine is described. The controller is based on locally linear synthesis techniques using linear, quadratic regulator design methods. The control structure uses an explicit model reference form with proportional and integral feedback near a nominal trajectory. Modeling issues, design procedures for the control law and the estimation of poorly measured variables are presented.

Skira, C. A.↗

Unified Theory for Aircraft Handling Qualities and Adverse Aircraft-Pilot Coupling

A unified theory for aircraft handling qualities and adverse aircraft-pilot coupling or pilot-induced oscillations is introduced. The theory is based on a structural model of the human pilot. A methodology is presented for the prediction of (1) handling qualities levels; (2) pilot-induced oscillation rating levels; and (3) a frequency range in which pilot-induced oscillations are likely to occur. Although the dynamics of the force-feel system of the cockpit inceptor is included, the methodology will not account for effects attributable to control sensitivity and is limited to single-axis tasks and, at present, to linear vehicle models. The theory is derived from the feedback topology of the structural model and an examination of flight test results for 32 aircraft configurations simulated by the U.S. Air Force/CALSPAN NT-33A and Total In-Flight Simulator variable stability aircraft. An extension to nonlinear vehicle dynamics such as that encountered with actuator saturation is discussed.

Hess, R. A.↗

Reduced-Order Aerodynamic Modeling Based on CFD Frequency Responses from Multisine Inputs

A system identification analysis was performed to determine a reduced-order model (ROM) of a computational fluid dynamics (CFD) solver in support of linear aeroservoelastic model development and feedback control design. The approach was applied to the FUN3D code for the half-span wind tunnel test article used in the NASA-Boeing collaboration called the Integrated Adaptive Wing Technology Maturation (IAWTM) project. In a transonic flow condition, multiple inputs (11 structural mode displacements and 3 control surface deflections) were simultaneously excited with orthogonal phase-optimized multisines while multiple outputs (the corresponding 14 generalized aerodynamic forces) were recorded. From these recorded times series, the matrix of frequency responses was computed and subsequently fit using rational function approximations (RFAs). It was found that the entire (14 x 14) matrix of frequency responses could be determined from a single CFD run and that results generally followed trends predicted using other methods. Differences were attributed to the modeling fidelity and nonlinearities from structural mode and control surface interactions at higher reduced frequencies. More accurate fits of the RFAs to the frequency response data were obtained by making two CFD runs, one with only structural mode excitations and one with only control surface excitations, which reduced the degree of nonlinearity in the modeling data.

Aeroservoelasticity↗

A rationale for human operator pulsive control behavior

When performing tracking tasks which involve demanding controlled elements such as those with K/s-squared dynamics, the human operator often develops discrete or pulsive control outputs. A dual-loop model of the human operator is discussed, the dominant adaptive feature of which is the explicit appearance of an internal model of the manipulator-controlled element dynamics in an inner feedback loop. Using this model, a rationale for pulsive control behavior is offered which is based upon the assumption that the human attempts to reduce the computational burden associated with time integration of sensory inputs. It is shown that such time integration is a natural consequence of having an internal representation of the K/s-squared-controlled element dynamics in the dual-loop model. A digital simulation is discussed in which a modified form of the dual-loop model is shown to be capable of producing pulsive control behavior qualitively comparable to that obtained in experiment.

Hess, R. A.↗

Exploration Systems Development Mission Directorate: Moon to Mars Architecture Definition Document

The National Aeronautics and Space Administration (NASA) explores the unknown in air and space, innovates for the benefit of humanity, and inspires the world through discovery. Extending the reach of humanity through the human exploration of the Moon, Mars, and beyond is key to that mission. NASA’s Moon to Mars Strategy and Objectives document establishes long-term goals and objectives for crewed deep space exploration; however, satisfying NASA’s Moon to Mars Objectives requires an innovative approach to the definition, management, and execution of NASA’s Moon to Mars Architecture. An architecture offers a high-level unifying structure and defines a system. It provides rules, guidelines, and constraints that define a cohesive and coherent framework that identifies constituent parts, relationships, and connections and establishes how those parts fit and work together. This Architecture Definition Document (ADD) establishes the process for the decomposition of objectives empowers the agency’s success in achieving human exploration of the cosmos. NASA updates this document annually to reflect the maturation of the architecture and the progress NASA and partners make toward achieving exploration objectives. The ADD is not a manifest or requirements document. Instead, it serves as a tool for the programs, projects, and engineers who will implement and execute NASA’s bold ambitions for crewed exploration of deep space. As established in the Moon to Mars Strategy and Objectives, “Why” we explore encompasses three pillars: Science, Inspiration, and National Posture. Ensuring success in all three areas requires an architectural approach that incorporates innovation, collaboration, and partnerships that can be sustained across a multi-decadal effort. This second revision (Rev-B) of the ADD, developed to support NASA’s 2024 Architecture Concept Review (ACR), incorporates several key updates to support the continued evolution of the architecture. Since the last revision of the ADD, NASA has significantly improved the clarity of the objective decomposition, which distills exploration objectives into the characteristics and needs and use cases and functions needed to achieve them. The updated decomposition incorporates findings from internal studies and diverse stakeholder feedback. A model-based systems engineering approach ensures coherence and consistency, removing inconsistency and repetition. Revision B also incorporates advancements to NASA’s Mars architecture, including insight into initial capabilities, systems, and operations necessary to support the Humans to Mars segment. Updates to objective decomposition for Mars add significant detail to the ADD and hint at areas of forward work and future study. An appendix adds greater depth in the future decisions needed for Mars that will drive lunar needs. They are not the only decisions to be made, but they will have huge effects on subsequent decisions. NASA continues to introduce new exploration systems into the architecture. Two new elements — initial surface habitat and lunar surface cargo lander—successfully passed mission concept review in 2024 as a result of extensive analysis, concept refinement, and studies. These elements and their respective reference missions appear in this revision. NASA also continues to apply architecture processes to cross-agency efforts and coordination with external stakeholders by including definitions of architecture technology gaps — essential areas for engagement across and beyond the agency. The technology gaps appendix identifies areas that need attention and innovation to enable future exploration. In publishing this information, NASA communicates the technologies and capabilities that may benefit from partnership with industry, academia, other U.S. government agencies, and international space agencies. Ultimately, NASA established the Moon to Mars Architecture approach to communicate and facilitate humanity’s journey into the universe according to the principles and recurring tenets of NASA’s Moon to Mars Strategy and Objectives. The NASA architecture team thanks their many stakeholders, participants, and partners for their efforts to review and provide feedback. Their support has been critical to the success of this approach.

Elements↗

An in-flight simulation of VTOL hover control concepts

Results of several parametric ground-based simulations covering a variety of VTOL in-hover control concepts are reviewed. The systems considered are angular acceleration, rate, and attitude control, as well as translational rate control. Since many cues are severely restricted by ground-based simulation (e.g., motion, peripheral vision, and environment), some form of in-flight validation of these results is desired. Such a study has been undertaken utilizing the NASA Ames X-14B VTOL aircraft. This in-flight simulator has been configured with a fly-by-wire capability in the hover mode through an analog-/digital variable stability system. This system permits the implementation of either response-feedback or model-following type of control. A comparison of flight- and ground-based data is shown for the attitude control system with the X-14B being flown in both a tethered hover and a free-flight hover.

Corliss, L. D.↗

An application of tensor ideas to nonlinear modeling of a turbofan jet engine

An application of tensor modelling to a digital simulation of NASA's Quiet, Clean, Shorthaul Experimental (QCSE) gas turbine engine is presented. The results show that the tensor algebra offers a universal parametrization which is helpful in conceptualization and identification for plant modelling prior to feedback or for representing scheduled controllers over an operating line.

Klingler, T. A.↗

Residue-Measure Model-Reduction Technique

New residue-measure criterion simplifies mathematical models of feedback-control systems. Although originally developed for flight control, approach applied to any flexible structural system involving dominantly linear dynamics.

Gluch, D. P.↗

Active control of flexural vibrations in beams

An analytical model of the feedback control system which estimates the voltage generated by the piezoelectric sensor as a function of the dynamic stress at the sensor location and the force exerted by the driver piezoelectric as a function of signal gain is developed. The analytical results are compared to measured results for a cantilever beam excited to vibrate in its first natural mode. The estimated increase in the first mode damping factor is in good agreement with the measured results.

Gerhold, Carl H.↗

Flight evaluations of several hover control and display combinations for precise blind vertical landings

Several control and display concepts were evaluated on a variable-stability helicopter prior to future evaluations on a modified Harrier. The control and display concepts had been developed to enable precise hover maneuvers, station keeping, and vertical landings in simulated zero-visibility conditions and had been evaluated extensively in previous piloted simulations. Flight evaluations early in the program revealed several inadequacies in the display drive laws that were later corrected using an alternative design approach that integrated the control and display characteristics with the desired guidance law. While hooded, three pilots performed landing-pad captures followed by vertical landings with attitude-rate, attitude, and translation-velocity-command control systems. The latter control system incorporated a modified version of state-rate-feedback implicit-model following. Precise landing within 2 ft of the desired touchdown point were achieved.

Schroeder, J. A.↗

Dynamics of aerospace vehicles

Papers on the following subjects are presented: (1) multivariable flight control synthesis and literal robustness analysis for an aeroelastic vehicles; (2) numerical and literal aeroelastic-vehicle-model reduction for feedback control synthesis; and (3) dynamics of aerospace vehicles.

Schmidt, David K.↗

Relativistic two-moment neutrino transport

We implement a general relativistic neutrino transport scheme appropriate to problems in stellar collapse and neutron star formation. In this scheme the spectral energy and momentum balance equations are solved as a coupled set. We perform transport calculations on two frozen stellar background models neglecting the feedback of the neutrinos on the matter. We compare with schemes that ignore either relativity or momentum balance or both. The work performed by the neutrino stress on the matter is taken into account and has an important effect. In particular, if there is a hydrodynamical shock in the system, this work contribution boosts the energy deposition behind the shock. This may enhance the chances for a successful neutrino driven supernova explosion.

Cernohorsky, J.↗

Control algorithm implementation for a redundant degree of freedom manipulator

This project's purpose is to develop and implement control algorithms for a kinematically redundant robotic manipulator. The manipulator is being developed concurrently by Odetics Inc., under internal research and development funding. This SBIR contract supports algorithm conception, development, and simulation, as well as software implementation and integration with the manipulator hardware. The Odetics Dexterous Manipulator is a lightweight, high strength, modular manipulator being developed for space and commercial applications. It has seven fully active degrees of freedom, is electrically powered, and is fully operational in 1 G. The manipulator consists of five self-contained modules. These modules join via simple quick-disconnect couplings and self-mating connectors which allow rapid assembly/disassembly for reconfiguration, transport, or servicing. Each joint incorporates a unique drive train design which provides zero backlash operation, is insensitive to wear, and is single fault tolerant to motor or servo amplifier failure. The sensing system is also designed to be single fault tolerant. Although the initial prototype is not space qualified, the design is well-suited to meeting space qualification requirements. The control algorithm design approach is to develop a hierarchical system with well defined access and interfaces at each level. The high level endpoint/configuration control algorithm transforms manipulator endpoint position/orientation commands to joint angle commands, providing task space motion. At the same time, the kinematic redundancy is resolved by controlling the configuration (pose) of the manipulator, using several different optimizing criteria. The center level of the hierarchy servos the joints to their commanded trajectories using both linear feedback and model-based nonlinear control techniques. The lowest control level uses sensed joint torque to close torque servo loops, with the goal of improving the manipulator dynamic behavior. The control algorithms are subjected to a dynamic simulation before implementation.

Cohan, Steve↗

Near-Real-Time Detection and Monitoring of Dust Events by Satellite (SeaWIFS, MODIS, and TOMS)

Over the last few years satellites have given us increasingly detailed information on the size, location, and duration of dust events around the world. These data not only provide valuable feedback to the modelling community as to the fidelity of their aerosol models but are also finding increasing use in near real-time applications. In particular, the ability to locate and track the development of aerosol dust clouds on a near real-time basis is being used by scientists and government to provide warning of air pollution episodes over major urban area. This ability has also become a crucial component of recent coordinated campaigns to study the characteristics of tropospheric aerosols such as dust and their effect on climate. One such recent campaign was ACE-Asia, which was designed to obtain the comprehensive set of ground, aircraft, and satellite data necessary to provide a detailed understanding of atmospheric aerosol particles over the Asian-Pacific region. As part of ACE-Asia, we developed a near real-time data processing and access system to provide satellite data from the polar-orbiting instruments Earth Probe TOMS (in the form of absorbing aerosol index) and SeaWiFS (in the form of aerosol optical thickness, AOT, and Angstrom exponent). The results were available via web access. The location and movement information provided by these data were used both in support of the day-to-day flight planning of ACE-Asia and as input into aerosol transport models. While near real-time SeaWiFS data processing can be performed using either the normal global data product or data obtained via direct broadcast to receiving stations close to the area of interest, near real-time MODIS processing of data to provide aerosol retrievals is currently only available using its direct broadcast capability. In this paper, we will briefly discuss the algorithms used to generate these data. The retrieved aerosol optical thickness and Angstrom exponent from SeaWiFS will be compared with those obtained from various AERONET sites over the Asian-Pacific region. The TOMS aerosol index will also be compared with AERONET aerosol optical thickness over different aerosol conditions, and comparisons between the MODIS and SeaWiFS data will also be presented. Finally, we will discuss the climate implication of our studies using the combined satellite and AERONET observations.

Hsu, N. Christina↗

Support for the Harvard University Water Vapor and Total Water Instruments for the 2004 NASA WB57 Middle Latitude Cirrus Experiment

In order to improve our understanding of the role clouds play in the climate system, NASA is investing considerable effort in characterizing clouds with instruments ranging from passive remote sensors on board the EOS platforms, to the forthcoming active remote sensors on Cloudsat and Calipso. These missions, when taken together, have the capacity to advance our understanding of the coupling between various components of the hydrologic cycle and the atmospheric circulation, and hold the additional potential of leading to significant improvements in the characterization of cloud feedbacks in global models. This is especially true considering that several of these platforms will be flown in an identical orbit within several minutes of one another-a constellation of satellites known as the A-Train. The algorithms that are being implemented and developed to convert these new data streams from radiance and reflectivity measurements into geophysical parameters invariably rely on some set of simplifymg assumptions and empirical constants. Uncertainties in these relationships lead to poorly understood random and systematic errors in the retrieved properties. This lack of understanding introduces ambiguity in interpreting the data and in using the global data sets for their intended purposes. In light of this, a series of flights with the W57F was proposed to address certain specific issues related to the basic properties of mid latitude cirrus clouds: the NASA WE357 Middle Latitude Cirrus Experiment ("MidCiX"). The science questions addressed are: 1) Can cloud property retrieval algorithms developed for A-Train active and passive remote sensing measurements accurately characterize the microphysical properties of synoptic and convectively generated cirrus cloud systems? 2) What are the relationships between the cirrus particle mass, projected area, and particle size spectrum in various genre of cirrus clouds? 3) Does the present compliment of state of the art in situ cloud probes provide the level of precision and accuracy needed to develop and validate algorithms and to contribute to our understanding of the characteristics and microphysical processes operating in cirrus clouds?

Anderson, James G.↗

Origin of the 'Extra Entropy'

I will discuss how one can determine the origin of the 'extra entropy' in groups and clusters and the feedback needed in models of galaxy formation. I will stress the use of x-ray spectroscopy and imaging and the critical value that Con-X has in this regard.

Mushotzky, R.↗