Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Tunneling magnetoresistance in MgO tunnel junctions with Fe-based leads in empirically corrected density functional theory

The minority-spin Fe/MgO interface states are at the Fermi level in density functional theory (DFT), but experimental evidence and GW calculations place them slightly higher in energy. This small shift can strongly influence tunneling magnetoresistance (TMR) in junctions with a thin MgO barrier and its dependence on the concentration of Co in the electrodes. Here, in this study, an empirical potential correction to DFT is introduced to shift the interface states up to match the tunnel spectroscopy data. With this shift, TMR in Fe/MgO/Fe junctions exceeds 800% and 3000% at 3 and 4 monolayers (ML) of MgO, respectively. We further consider the effect of alloying of the Fe electrodes with up to 30% Co or 10% V, treating them in the coherent potential approximation (CPA). Alloying with Co broadens the interface states and brings a large incoherent minority-spin spectral weight to the Fermi level. Alloying with V brings the minority-spin resonant states close to the Fermi level. However, in both cases the minority-spin spectral weight at the Fermi level resides primarily at the periphery of the Brillouin zone, which is favorable for spin filtering. Using convolutions of k II -resolved barrier densities of states calculated in CPA, it is found that TMR is strongly reduced by alloying with Co or V but still remains above 500% at 4 ML of MgO up to 30% of Co or 5% V. At 5 ML, the TMR increases above 1000% in all systems considered. However, while TMR declines sharply with increasing bias up to 0.2 eV in the tunnel junctions with pure Fe leads, it remains almost constant up to 0.5 eV if leads are alloyed with Co.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structural modulation, physical properties, and electronic band structure of the kagome metal UCr 6 ⁢Ge 6

The chemical flexibility of the 𝑅⁢𝑀 6 ⁢𝑋 6 stoichiometry, where an 𝑓-block element is intercalated in the CoSn structure type, allows for the tuning of flatbands associated with kagome lattices to the Fermi level and for emergent phenomena due to interactions between the 𝑓- and 𝑑-electron lattices. Yet, 5⁢𝑓 members of the “166” compounds are underrepresented compared with 4⁢𝑓 members. In this work, we report single-crystal growth of UCr 6 ⁢Ge 6 , which crystallizes in a monoclinically distorted Y 0.5⁢ Co 3 ⁢Ge 3 -type structure. The real-space character of the modulation, which is unique within the 𝑅⁢𝑀 6 ⁢𝑋 6 family, is approximated by a 3×1×2 supercell of the average monoclinic cell. The compound has kagome-lattice flatbands near the Fermi level and a moderately enhanced electronic heat capacity, as evidenced by its low-temperature Sommerfeld coefficient (𝛾=86.5 mJ mol −1 K −2 ) paired with band structure calculations. The small, isotropic magnetization and featureless resistivity of UCr 6 ⁢Ge 6 suggest itinerant uranium 5⁢𝑓 electrons and Pauli paramagnetism. Angle-resolved photoemission spectroscopy results provide evidence for uranium 5⁢𝑓 weight at the Fermi level and for a flatband near the Fermi level associated with the chromium 3⁢𝑑 kagome lattice. The isotropic magnetic behavior of the uranium 5⁢𝑓 electrons starkly contrasts with localized behavior in other uranium 166 compounds, highlighting the high tunability of the magnetic ground state across the material family.

36 MATERIALS SCIENCE↗

On the electronic properties of GaSb irradiated with reactor neutrons and its charge neutrality level

The electronic properties and the limiting position of the Fermi level in p-GaSb crystals irradiated with full-spectrum reactor neutrons at up to a fluence of 8.6 × 10{sup 18} cm{sup −2} are studied. It is shown that the irradiation of GaSb with reactor neutrons results in an increase in the concentration of free holes to p{sub lim} = (5−6) × 10{sup 18} cm{sup −3} and in pinning of the Fermi level at the limiting position F{sub lim} close to E{sub V} + 0.02 eV at 300 K. The effect of the annealing of radiation defects in the temperature range 100–550°C is explored.

36 MATERIALS SCIENCE↗

Magnetic property and possible half-metal behavior in Co-doped graphene

The magnetic property and band structures of Co-monolayer doped graphene were examined on the basis of density-functional theory. The magnetic moment of the system is closely related to the interfacial spacing. Magnetic-nonmagnetic transition would be produced by decreasing the layer distance. Although the magnetic moment can also be reduced by increasing the lattice constant, the ground states are magnetic states under tension. Besides, the increase of lattice constant greatly enlarges the direct and indirect gaps of spin-down bands near the Fermi level. With a little increase of the Fermi level or the electron density, half-metal behavior would be expectable in the Co-doped graphene under tension.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure of the kagome metal YbTi 3 Bi 4 studied using torque magnetometry

This study investigates the electronic structure of the kagome metal YbTi 3 ⁢Bi 4 using high-field torque magnetometry. The torque signal measured at a maximum field of 41.5 T reveals clear de Haas–van Alphen (dHvA) oscillations with a major frequency peak at F δ ~ 130 T. By rotating the sample at various tilt angles Θ, we observed that F δ exhibits a nearly 1/cos⁡Θ dependence, indicating the presence of a quasi-two-dimensional (2D) Fermi surface (FS) in YbTi 3 ⁢Bi 4 . This argument is further supported by the detection of a forward-leaning, sawtoothlike waveform in the dHvA effect, a hallmark of 2D FS characteristics. Notably, we identified two high-frequency peaks near F χ ~ 1900 T and F λ ~ 5600 T; however, these peaks quickly disappear at Θ greater than 21°. To better understand experimental observations, we computed the electronic band structure and FS using ab initio density-functional theory (DFT). The electronic bands reveal the presence of several Dirac points, flat bands, and van Hove singularities near the Fermi level. Five bands cross the Fermi level and contribute to the FS of this material. The FS comprises cylindrical sheets, with theoretical frequencies from the FS pockets aligning well with the experimental dHvA frequencies. Several FS parameters characterizing F δ were determined by analyzing the temperature and field dependence of the dHvA oscillations using the Lifshitz-Kosevich theory. Further, the detailed electronic properties presented in this work provide critical insights into the electronic structure of YbTi 3 ⁢Bi 4 and other titanium-based kagome compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Autonomous quantum absorption refrigerators

Here, we propose a quantum absorption refrigerator using the quantum physics of resonant tunneling through quantum dots. The cold and hot reservoirs are fermionic leads, tunnel coupled via quantum dots to a central fermionic cavity, and we propose configurations in which the heat absorbed from the (very hot) central cavity is used as a resource to selectively transfer heat from the cold reservoir on the left to the hot reservoir on the right. Heat transport in the device is particle-hole symmetric; we find two regimes of cooling as a function of the dot energies—symmetric with respect to the Fermi energy of the reservoirs—and we associate them with heat transfer by electrons above the Fermi level and holes below the Fermi level. We also discuss optimizing the cooling effect by fine-tuning the energy of the dots as well as their linewidth and characterize regimes where the transport is thermodynamically reversible such that the Carnot coefficient of performance is achieved with zero cooling power delivered.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-principles study of electronic structures and photocatalytic activity of low-Miller-index surfaces of ZnO

First-principles calculations have been performed to investigate the electronic structures and optical properties of the main low-Miller-index surfaces of ZnO: nonpolar (1010) and (1120) surfaces as well as polar (0001)-Zn and (0001)-O surfaces. According to the structure optimization results, there are similar relaxation behaviors for the (1010) and (1120) surfaces, both with a strong tilting of the surface Zn-O dimers and an obvious contraction of the surface bonds. For the polar surfaces, the surface double layers both tend to relax inwards, but the largest relaxation is found on the (0001)-O surfaces. The calculated band gaps are 0.56, 0.89, 0.21, and 0.71 eV for (1010), (1120), (0001)-Zn and (0001)-O surfaces, respectively. For the nonpolar (1010) and 1120 surfaces, the Fermi levels locate at the valence band maximum, which are similar to that of bulk ZnO. The surface states in the conduction band lead to the increased Fermi level and cause the n-type conduction behavior for (0001)-Zn surface. For the (0001)-O surface, the Fermi level shifts down a little into the valence band, leading to the p-type conduction behavior. From the optical properties calculations, absorption regions of all the four surfaces are quite wide and the main absorption peaks locate in the UV region. For the (0001)-Zn surface, it has the strongest absorptions in the near UV-light range and a remarkable red-shift phenomenon of the absorption edge. This indicates that (0001)-Zn surface has the highest photocatalytic activity among the four surfaces as the low excitation energy is required theoretically. The computed results are in accordance with the experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky barrier heights at the interfaces between pure-phase InAs nanowires and metal contacts

Understanding of the Schottky barriers formed at metal contact-InAs nanowire interfaces is of great importance for the development of high-performance InAs nanowire nanoelectronic and quantum devices. Here, we report a systematical study of InAs nanowire field-effect transistors (FETs) and the Schottky barrier heights formed at the contact-nanowire interfaces. The InAs nanowires employed are grown by molecular beam epitaxy and are high material quality single crystals, and the devices are made by directly contacting the nanowires with a series of metals of different work functions. The fabricated InAs nanowire FET devices are characterized by electrical measurements at different temperatures and the Schottky barrier heights are extracted from the measured temperature and gate-voltage dependences of the channel current. We show that although the work functions of the contact metals are widely spread, the Schottky barrier heights are determined to be distributed over 35–55 meV, showing a weak but not negligible dependence on the metals. The deduced Fermi level in the InAs nanowire channels is found to be in the band gap and very close to the conduction band. The physical origin of the results is discussed in terms of Fermi level pinning by the surface states of the InAs nanowires and a shift in pinned Fermi level induced by the metal-related interface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half-metallic properties, single-spin negative differential resistance, and large single-spin Seebeck effects induced by chemical doping in zigzag-edged graphene nanoribbons

Ab initio calculations combining density-functional theory and nonequilibrium Green’s function are performed to investigate the effects of either single B atom or single N atom dopant in zigzag-edged graphene nanoribbons (ZGNRs) with the ferromagnetic state on the spin-dependent transport properties and thermospin performances. A spin-up (spin-down) localized state near the Fermi level can be induced by these dopants, resulting in a half-metallic property with 100% negative (positive) spin polarization at the Fermi level due to the destructive quantum interference effects. In addition, the highly spin-polarized electric current in the low bias-voltage regime and single-spin negative differential resistance in the high bias-voltage regime are also observed in these doped ZGNRs. Moreover, the large spin-up (spin-down) Seebeck coefficient and the very weak spin-down (spin-up) Seebeck effect of the B(N)-doped ZGNRs near the Fermi level are simultaneously achieved, indicating that the spin Seebeck effect is comparable to the corresponding charge Seebeck effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultraviolet photoelectron spectroscopic study of boron adsorption and surface segregation on Si(111)

The adsorption and surface segregation behavior of elemental boron (B) deposited on Si(111) have been studied by ultraviolet photoelectron spectroscopy and accompanying reflection high-energy electron diffraction as a function of the B coverage (c{sub B}) and annealing temperature (T). Our results clearly demonstrate an effective incorporation of B into subsurface sites at T > 800 K and formation of a well-ordered ({radical}(3)x{radical}(3))R30 deg. surface superstructure. Thereby, a critical c{sub B} of about 0.6 monolayers (ML) was determined for different conditions to prevent surface defects resulting from Si dangling bonds, which appear as surface states at 0.4 eV below the Fermi level. Annealing of the defect-free ({radical}(3)x{radical}(3))R30 deg. superstructure covered by several MLs Si at T{>=} 1040 K results in a renewal of the perfect B-induced Si surface structure, even after several deposition and annealing cycles. This indicates a dominance of B surface segregation over bulk diffusion. Significant B bulk diffusion commences only above 1100 K. Differences were found for spectra obtained for the B-induced surface structures formed after deposition and surface segregation, respectively. An additional surface state appeared at 2.1 eV below the Fermi level after deposition of 0.6 ML B. The state could be attributed to boron-boron interaction due to the presence of small clusters at the surface. This surface state did not disappear after high-T annealing and was not observed for lower c{sub B} and after B surface segregation, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initiation of a passivated interface between hafnium oxide and In(Ga)As(0 0 1)-(4x2)

Hafnium oxide interfaces were studied on two related group III rich semiconductor surfaces, InAs(0 0 1)-(4x2) and In{sub 0.53}Ga{sub 0.47}As(0 0 1)-(4x2), via two different methods: reactive oxidation of deposited Hf metal and electron beam deposition of HfO{sub 2}. The interfaces were investigated with scanning tunneling microscopy and spectroscopy (STS). Single Hf atom chemisorption sites were identified that are resistant to oxidation by O{sub 2}, but Hf islands are reactive to O{sub 2}. After e{sup -} beam deposition of <<1 ML of HfO{sub 2}, single chemisorption sites were identified. At low coverage (<1 ML), the n-type and p-type HfO{sub 2}/InGaAs(0 0 1)-(4x2) interfaces show p-type character in STS, which is typical of clean InGaAs(0 0 1)-(4x2). After annealing below 200 deg. C, full coverage HfO{sub 2}/InGaAs(0 0 1)-(4x2) (1-3 ML) has the surface Fermi level shifted toward the conduction band minimum for n-type InGaAs, but near the valence band maximum for p-type InGaAs. This is consistent with the HfO{sub 2}/InGaAs(0 0 1)-(4x2) interface being at least partially unpinned, i.e., a low density of states in the band gap. The partially unpinned interface results from the modest strength of the bonding between HfO{sub 2} and InGaAs(0 0 1)-(4x2) that prevents substrate atom disruption. The fortuitous structure of HfO{sub 2} on InAs(0 0 1)-(4x2) and InGaAs(0 0 1)-(4x2) allows for the elimination of the partially filled dangling bonds on the surface, which are usually responsible for Fermi level pinning.

36 MATERIALS SCIENCE↗

Surface-plasmon enhancement of band gap emission from ZnCdO thin films by gold particles

We present our study of the dependence of surface plasmon (SP) coupled band gap emission and defect emission on the sputtering time of gold particles on ZnCdO films. Eightfold enhancement of the band gap emission from ZnCdO thin films coated with Au particles is observed, while the defect emission is completely suppressed. The remarkable enhancement of the band gap emission is mainly attributed to the coupling between excitons in ZnCdO films and the SP of Au particles. While the suppression of the defect emission may be ascribed to a combined effect of the reduction in surface defects and the charge transfer from defect level to the Au Fermi level.

36 MATERIALS SCIENCE↗

Tunnel current across linear homocatenated germanium chains

The electronic transport properties of germanium oligomers catenating into linear chains (linear Ge chains) have been theoretically studied using first principle methods. The conduction mechanism of a Ge chain sandwiched between gold electrodes was analyzed based on the density of states and the eigenstates of the molecule in a two-probe environment. Like that of silicon chains (Si chains), the highest occupied molecular orbital of Ge chains contains the extended σ-conjugation of Ge 4p orbitals at energy levels close to the Fermi level; this is in contrast to the electronic properties of linear carbon chains. Furthermore, the conductance of a Ge chain is expected to decrease exponentially with molecular length L. The decay constant β, which is defined as e{sup −βL}, of a Ge chain is similar to that of a Si chain, whereas the conductance of the Ge chains is higher than that of Si chains even though the Ge–Ge bond length is longer than the Si–Si bond length.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

5f band dispersion in epitaxial films of UO2

Polymer-assisted deposition of epitaxial films utilizes lattice pinning to produce films of very high stability and properties identical with bulk crystal. Dispersion of the 5f band is shown for the first time in a actinide Mott insulator system, which suggestes hybridization as a leading process in establishing the electronic structure. Hybrid density functional is succesfully employed to calculate the electronic structure of UO{sub 2} in agreement with experiments. UO{sub 2} continues to be a mysterious and elusive compound in terms of understanding the physical properties of a material. Most actinide oxides, including UO{sub 2} are predicted to be metallic. However, UO{sub 2} is an antiferromagnetic insulator with a relatively large gap of about 2eV. The f orbital charater of the excitations across the gap places UO{sub 2} in a Mott insulator category, but no states at the gap center have ever been measured directly, in spite of intensive efforts. In this work we present the first results of the electronic structure investigation of a epitaxial film of UO{sub 2}, where we find even more unexpected properties, like the dispersive nature of 5f bands. We also demonstrate the unexpected, very high stability of the epitaxial film of UO{sub 2}. In the lattice-pinning scheme, the crystalline nature of the film is preserved all the way up to the topmost layers even after prolonged exposure to atmospheric conditions. Hybridized, dispersive bands are common in the itinerant uranium compounds. One usually finds hybridization of f-orbitals with conduction band to be quite common in f-electron systems at low temperatures. Such bands may reside in the vicinity of the Fermi level and participate in the construction of the Fermi surface. However, in the insulator like UO{sub 2}, one expects a more atomic band nature, where f-bands are relatively flat and shifted away from the Fermi level by the gap energy scale. Precise location of UO{sub 2} on the localization-delocalization axis could be pinned down by measurements of band dispersion.

36 MATERIALS SCIENCE↗

Nematic order of spin structures of clusters in the hubbard model

The possibility of interpreting the normal pseudogap state of cuprates as a result of the formation of spin and charge structures is investigated for solutions of the Hubbard model of a finite 2D cluster based on the mean field method. The iterative self-consistency procedure reduces the initial uncorrelated spin distributions to stable structures. The Fourier components of the charge and spin distributions in such structures have peaks for characteristic incommensurate quasi-momenta depending on the doping. It is shown that for any doping, the density of states of the system has a sharp minimum (pseudogap) at the Fermi level. This emergence of the gap just at the Fermi level is a property typical of not only the superconducting state, but also the normal state of spin glasses. The characteristics of the Fermi surface averaged over the implemented structures and the properties of quasiparticles in the nodal and antinodal regions of the quasi-momentum are considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transport on the surface of a topological insulator

We study theoretically dc and ac transport on the surface of a three-dimensional topological insulator when its time-reversal symmetry is broken. Starting with a Kubo formula, we derive an explicit expression for the dc Hall conductivity, valid for finite temperatures. At zero temperature this expression gives the dc half-quantum Hall conductivity, provided the Fermi level lies in the gap. Corrections when the Fermi level is outside the gap and scattering by impurities are quantified. The longitudinal conductivity is also examined. At finite frequencies, we find a modified Drude term in σ{sub xx}(ω) and logarithmic, frequency-dependent corrections in σ{sub yx}(ω). The ac Hall conductivity exhibits a robust logarithmic singularity for excitation energies equal to the gapwidth. For these energies, we also find that the power spectrum, which is pertinent to optical experiments, exhibits drastic increase. The Hall conductivity remains almost unaffected for temperatures up to approximately 300 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Emergence of topological electronic phases in elemental lithium under pressure

Lithium, a prototypical simple metal under ambient conditions, has a surprisingly rich phase diagram under pressure, taking up several structures with reduced symmetry, low coordination numbers, and even semiconducting character with increasing density. Using first-principles calculations, we demonstrate that some predicted high-pressure phases of elemental Li also host topological electronic structures. Beginning at 80 GPa and coincident with a transition to the previously predicted Pbca phase, we find Li to be a Dirac nodal line semimetal. We further calculate that Li retains linearly dispersing energy bands near the Fermi energy in subsequent predicted higher-pressure phases and that it exhibits a Lifshitz transition between two Cmca phases at 220 GPa. The Fd 3 ¯ m phase at 500 GPa forms buckled honeycomb layers that give rise to a Dirac crossing 1 eV below the Fermi energy. The well-isolated topological nodes near the Fermi level in these phases result from increasing p-orbital character with density at the Fermi level, itself a consequence of rising 1s core wavefunction overlap, and a preference for nonsymmorphic symmetries in the crystal structures favored at these pressures. Our results provide evidence that under pressure, bulk 3D materials with light elements, or even pure elemental systems, can undergo phase transitions hosting nontrivial topological phase transitions hosting nontrivial topological properties near the Fermi level with measurable consequences and that, through pressure, we can access these phases in elemental lithium.

36 MATERIALS SCIENCE↗

Electronic Structures of Newly Discovered Quasi-One-Dimensional Superconductors A{sub 2}Mo{sub 3}As{sub 3} (A=K,Rb,Cs)

Electronic structures of the newly discovered quasi-one-dimensional superconductors A{sub 2}Mo{sub 3}As{sub 3} (A=K, Rb and Cs) are studied through first-principles calculations. We find that the bond lengths within the [Mo{sub 6}As{sub 6}]{sup 4−} chains are robust against the replacement of alkali cations, leading to quite similar electronic structures among the three members. Three bands cross the Fermi level and form two quasi-one-dimensional Fermi surfaces as well as one three dimensional component. The obtained density of states near the Fermi level show great Mo-4d orbitals character, in particular the d{sub z{sup 2}}, d{sub xy} and d{sub x{sup 2}−y{sup 2}} orbitals. Our calculations show that A{sub 2}Mo{sub 3}As{sub 3} share great similarity in electron properties with extensively studied A{sub 2}Cr{sub 3}As{sub 3}, indicating that A{sub 2}Mo{sub 3}As{sub 3} are probably another family of unconventional quasi-one-dimensional superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗