Search NASA⌕ Search

SEARCH · Search NASA

Results for “Filtering techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Ground-based observations at 34 microns.

Filtering techniques for a new photometric band from 28 to 40 microns are described together with the results of ground-based observations of planets, stars, and galactic nebulae conducted with 28- and 61-in. telescopes in this wavelength interval. The data indicate that high angular resolution and good sensitivity can be obtained at 34 microns from the ground. Some stars have very cold (less than 100 K) circumstellar dust shells or clouds. The Kleinmann-Low nebula in M42 is extremely bright at 34 microns, whereas the Ney-Allen nebula associated with the Trapezium stars is much weaker.

Low, F. J.↗
NASA NTRS1974

Thermal emission of Saturn's rings and disk at 34 microns

The relative thermal emission from the rings and disk of Saturn in the band from 29 to 43 micrometers has been measured with the aid of ground-based observations in which new filter techniques were used. The new data provide an important constraint for separating the thermal properties of Saturn from those of its rings. The results reported support previous suggestions of a large internal heat source for Saturn.

Nolt, I. G.↗
NASA NTRS1974

Gyroflex data transmittal and data acquisition system analysis

Data obtained from the evaluation of GYROFLEX gyro is presented herein, along with a description of the data acquisition system. In addition, the appendices contain an analysis of the voltmeter used for data collection, and the filtering technique employed. It is shown that the test setup is satisfactory for testing GYROFLEX gyros.

Peckham, C.↗
NASA NTRS1976

Photometry of the cometary atmosphere: A review

Photometry and polarimetry of the cometary heads one of the most important sources of information about the physical processes in comets is reviewed. Methods of inspection discussed include: narrow band photometry, wide band photometry, color photography, tilting filter techniques, and photoelectric spectrum scanning. Results of photoelectric observations of comets are described including photoelectric and infrared measurements of comet Kohoutek. Photometric profiles of the coma in monochromatic light are used to determine the lifetime of the parent molecules for the observed radicals, CN and C2.

Vanysek, V.↗
NASA NTRS1977

Programmable convolution via the chirp Z-transform with CCD's

Technique filtering by convolution in frequency domain rather than in time domain presents possible solution to problem of programmable transversal filters. Process is accomplished through utilization of chip z-transform (CZT) with charge-coupled devices

Buss, D. D.↗
NASA NTRS1977

Remote sounding of cloudy atmospheres. III - Experimental verifications

The cloud-filtering technique developed in Parts I and II of this study is experimentally verified in this paper. The verification is based on radiance data measured in the 4.3 and 15 micron CO2 bands using a multidetector sounder mounted on an aircraft. The results presented here show that, from the aircraft height of 7.6 km and in the presence of multiple cloud formations, it is possible to recover simultaneously: (1) the clear-column atmospheric temperature profile with an rms error of 1 K with respect to radiosondes, (2) the land and sea surface temperature at all sun zenith angles. The accuracy of the recovered sea-surface temperature is 0.5-1 K with respect to measured bucket temperatures, (3) the humidity profile (water vapor mixing ratio) with a precision of 10%, (4) the fractional covers and heights of up to three cloud formations, and (5) the types of clouds, i.e., whether convective or nonconvective.

Chahine, M. T.↗
NASA NTRS1977

Monte Carlo turbulence simulation

The paper describes turbulence simulation experiments based on the principles of control system theory, that is, the construction of a system characterized by a system function such that upon exciting the system with prescribed noise processes the output of the system is a realization of a random processing the desired statistical attributes of turbulence. An experimental autocorrelation of Jimsphere measurements of wind velocity was approximated to simulate turbulent wind. From the approximate autocorrelation function, the required system function is obtained, and a discrete time system is designed. Another method of simulation is to solve the convolution integral by filter techniques. Other methods include discrete Fourier simulation and self-similar simulation.

Fichtl, G. H.↗
NASA NTRS1978

Lidar observations of wave-like structure in the atmospheric sodium layer

The University of Illinois (Urbana) lidar system has been developed to study the atmospheric sodium layer near 90 km altitude through the mechanism of resonance scattering. The photocount data are processed using digital smoothing filters to obtain continuous estimates of the sodium density versus altitude. The filter cutoff frequency is related to the height resolution and accuracy of the estimated profile. Lidar photocount data processed using this filtering technique show wave-like structures in the sodium layer which move downward with time. The waves have typical wavelengths of 3-15 km and phase velocities of less than 1 m/sec. The movement of these structures seems to be independent of the motion of the bottomside of the layer, which also has been observed to move up or down by as much as 2 km over a period of a few hours.

Rowlett, J. R.↗
NASA NTRS1978

Precision attitude determination for multimission spacecraft

Attitude determination algorithms for a multimission spacecraft are derived and their performance analyzed. The attitude determination system is composed of a strapdown Inertial Reference Unit (IRU), two fixed head star trackers, and an onboard computer. IRU data is processed to maintain real-time knowledge of spacecraft attitude relative to an inertial reference frame. Star tracker data is processed using Kalman filtering techniques to estimate and correct the attitude determination errors and the gyro drift compensation errors. The results of a star availability analysis for stellar, solar and earth pointing missions are presented. Linear covariance analysis techniques are used to evaluate nominal attitude determination performance, the effects of sensor measurement accuracy variations, the effects of errors in knowledge of sensor measurement accuracy, and the effects of star tracker misalignment errors. Results of a nonlinear simulation analysis of attitude determination performance are also presented. These analyses show that precision attitude determination for stellar, solar and earth pointing missions is achieved.

Murrell, J. W.↗
NASA NTRS1979

Development of high reliability, high frequency power conditioning models of converter regulators

High efficiency conversion, regulation, and filtering techniques are discussed for power using high conversion frequencies; i.e., in the order of 1 to 5 MHz for converters having total output power capability in the order of 20 watts and 200 to 500 KHz for converters having total output powers in excess of 200 watts. Work centered on areas of component selection, material selection, optimization of the various types of circuits required, and the selection of materials for and design of magnetic components. These techniques were then applied to the design of two sample converters, one a medium power instrument type converter and the second a high power converter representative of a primary spacecraft converter regulator. The configuration and performance of the two converters is reported and discussed.

Rochussen, A. W.↗
NASA NTRS1978

Lunar Seismology: the Internal Structure of the Moon

The direct P and S wave arrival times are the primary data set that can be measured on the seismograms of natural lunar seismic events. Polarization filtering techniques allow the enhancement of secondary body wave arrivals and record curves to identify the secondary phases and deduce structural information. Finally, shear wave amplitude vs. distance curves yield information on the location and magnitude of seismic velocity gradients in the interior. The results of these analyses show that the moon appears to have a two-layer crust at all four seismic stations: a 20 km upper crust that seems to be constant at all sites and a lower crust that is 40 km thick at stations 12 and 14 (mare), 55 + or - 10 km at station 16 (highland), and tentatively either 40 km or 70 km at station 15. The lower mantle extends from 480 km to at least 1100 km depth which is the maximum depth of penetration of all but a few seismic waves used as data. No definitive evidence for or against a lunar core exists.

Goins, N. R.↗
NASA NTRS1979

Real-time onboard geometric image correction

A system to perform real time onboard geometric connection of LANDSAT D resolution satellite imagery is described. System requirements, algorithms, sensors, and other hardware components are defined. Feasibility of implementing the correction process is demonstrated using Kalman filter techniques to incorporate information from onboard ephemeris, attitude control, and ground control points. Random access sensor systems, such as charge injected devices and charge coupled devices are used to obtain pixel values at desired ground location, thus greatly reducing the data processing requirements.

Discenza, W.↗
NASA NTRS1978

On-board data processing for the IRAS telescope system

Onboard data processing has been developed for the Infrared Astronomical Satellite (IRAS) telescope system to effectively utilize the RF bandwidth and minimize the ground-data processing costs. Use of filtering techniques, data deglitching circuits, and data encoding algorithms are combined with a microprocessor-controlled telescope system to achieve a system dynamic range of 100,000 with a noise equivalent flux density of no less than 10 to the minus 19th W/sq cm. Extraneous data, e.g., noise due to radiation hits, will be removed prior to transmission, thereby optimizing ground-data processing for the highest sensitivity and reliability. Simulation results are presented which demonstrate the advantages gained through the use of onboard data processing and illustrate the possible merging of these techniques with an array for the future evolution of 'smart' sensors.

Lum, H.↗
NASA NTRS1978

Real-time synthetic aperture radar data processing for space applications

Range and azimuth correlation in the time domain using current state-of-the-art CCD LSI technology provides a potentially practical means of achieving real-time pipeline processing of SAR images for future space missions. The proposed range correlator approach, using already demonstrated CCD transversal filtering techniques, will require very little power: less than 10 watts per Seasat-type 20-km processing module. The azimuth correlator architecture is considerably more demanding since it requires a large number of parallel chips (1020 for a Seasat-type 20-km module) to achieve a real-time processing capability.

Arens, W. E.↗
NASA NTRS1980

Aliasing filter for multirate systems

Rolloff filter is inexpensive way of reducing aliasing in digital control systems. Rolloff filter operating at faster sample rate (or rates) of system with 2:1 rate ratio gives infinite attenuation at half-sample rate of fast-rate loop. Tested successfully on Space Shuttle primary flight-control systems, filter technique could be applied to other multirate sampled-data systems.

Lee, J. F. L.↗
NASA NTRS1978

Identification of frequency components in electron content data by nonlinear filtering

A nonlinear filtering technique, called multiplicative homomorphic signal processing, is used to identify three groups of frequency components in electron content data. The first group of components results from the modulation of solar activity produced by the 27 day solar rotation. The second group is of lunar origin. The lunar frequencies are caused by nonlinear processes which probably occur in the dynamo region. The precise nature of these processes is not fully understood. The third group of frequency components, with a fundamental period of 13.9 days, has an unknown origin.

Bernhardt, P. A.↗
NASA NTRS1980

X-ray maps of the Vela supernova remnant

X-ray maps of the Vela supernova remnant in two energy channels, 0.1-0.4 keV and 0.4-0.8 keV, are presented. The data were obtained in 1975 from a SAS 3 satellite observation. We describe the Wiener filter technique used to deconvolve the angular response of the instrument from the data. The X-ray structure is compared with the optical and radio features of the region.

Hearn, D. R.↗