Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flyer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The 25 kW power module evolution study. Part 1: Payload requirements and growth scenarios

Payload power level requirements and their general impact on the baseline and growth versions of the 25 kW power module during the 1983 to 1990 period are discussed. Extended duration Orbiter sortie flight, supported by a power module, with increased payload power requirements per flight, and free-flyer payload missions are included. Other payload disciplines considered, but not emphasized for the 1983 to 1986 period include astrophysics/astronomy, earth observations, solar power satellite, and life sciences. Of these, only the solar power satellite is a prime driver for the power module.

Source record↗
NASA NTRS1979

Digital controller design: Analysis of the annular suspension pointing system

The Annular Suspension and Pointing System (ASPS) is a payload auxiliary pointing device of the Space Shuttle. The ASPS is comprised of two major subassemblies, a vernier and a coarse pointing subsystem. The experiment is attached to a mounting plate/rim combination which is suspended on magnetic bearing/actuators (MBA) strategically located about the rim. Fine pointing is achieved by gimballing the plate/rim within the MBA gaps. Control about the experiment line-of-sight is obtained through the use of a non-contacting rim drive and positioning torquer. All sensors used to close the servo loops on the vernier system are noncontacting elements. Therefore, the experiment is a free-flyer constrained only by the magnetic forces generated by the control loops.

Kuo, B. C.↗
NASA NTRS1979

25 kW power module evolution study

This paper presents a study of evolutionary growth concepts for the 25 kW power module to augment STS mission support future capabilities. The study aimed to establish user payload requirements, define evolution methods for system initial operational capability, and formulate a development program and conceptual designs. The payload requirements analysis focused on material processing in space, public services, and solar terrestrial observations; evolutionary system concepts were evaluated to derive the power module and system support requirements, and four reference orbits were used to construct the nominal program scenario. The mission accomodations analysis evaluated the capability of the nominal program scenario and associated power module concepts to meet user needs. Finally, the recommended modular design consisting of electric power, attitude control, thermal control, and command and data handling is described, and it is concluded that the 25 kW power module is a logical first step to support the near term NASA sortie and free-flyer mission requirements.

Overall, J. W., Jr.↗
NASA NTRS1979

Manned remote work station - Safety and rescue considerations

It is noted that due to restrictions of payload and volume limitations of current and projected launch systems, space construction of ultralarge space structures is essential. The present paper discusses the concepts of a key piece of construction equipment needed to support assembly of such large structures. Attention is given to the manned remote work station (MRWS), a universal crew cabin to be used as a construction cherry picker, space crane turret, work station on a construction base rail system, or a free flyer. Concepts and safety and rescue requirements for this spacecraft are delineated for early applications in support of Shuttle operations, as well as applications in support of a mid to late 1980's space construction base. Finally, applications in support of constructing and maintaining a solar power satellite system are covered.

Nathan, C. A.↗
NASA NTRS1979

Manned remote work station development article. Volume 1, book 1: Flight article requirements. Appendix A: Mission requirements

The requirements for several configurations of flight articles are presented. These requirements provide the basis to design manned remote work station development test articles and establish tests and simulation objectives for the resolution of development issues. Mission system and subsystem requirements for four MRWS configurations included: open cherry picker; closed cherry picker; crane turret; and free flyer.

Source record↗
NASA NTRS1979

A look at the universe in gamma rays

The scientific background and objectives, proposed instruments, spacecraft constraints, operations plans and present status and schedule of the Gamma Ray Observatory (GRO), a shuttle-launched free-flyer satellite currently planned by NASA, are reviewed. Objectives for the satellite study of the highest energy electromagnetic radiation in the cosmos discussed include the investigation of the evolution of compact objects, nucleosynthesis, gamma-ray objects whose nature is not yet known, the gamma-ray properties of the Galaxy and other galaxies, cosmological effects and intense gamma-ray bursts. The five instruments considered in the definition study which span six decades in energy are presented and proposed experiments are outlined. Although a spacecraft has not yet been selected, several feasible alternatives have been identified, and a launch in the mid-1980s is planned.

Kniffen, D. A.↗
NASA NTRS1979

X-ray optics for the LAMAR facility, an overview

The paper surveys the Large Area Modular Array of Reflectors (LAMAR), the concept of which is based on meeting two major requirements in X-ray astronomy, large collecting area and moderately good or better angular resolution for avoiding source confusion and imaging source fields. It is shown that the LAMAR provides the same sensitivity and signal to noise in imaging as a single large telescope having the same area and angular resolution but is a great deal less costly to develop, construct, and integrate into a space mission. Attention is also given to the LAMAR modular nature which will allow for an evolutionary development from a modest size array on Spacelab to a Shuttle launched free flyer. Finally, consideration is given to manufacturing methods which show promise of making LAMAR meet the criteria of good angular resolution, relatively low cost, and capability for fast volume production.

Gorenstein, P.↗
NASA NTRS1980

Materials processing in space: Future technology trends

NASA's materials processing in space- (MPS) program involves both ground and space-based research and looks to frequent and cost effective access to the space environment for necessary progress. The first generation payloads for research are under active design and development. They will be hosted by the Space Shuttle/Spacelab on Earth orbital flights in the early 1980's. hese missions will focus on the acquisition of materials behavior research data, the potential enhancement of Earth based technology, and the implementation of space based processing for specialized, high value materials. Some materials to be studied in these payloads may provide future breakthroughs for stronger alloys, ultrapure glasses, superior electronic components, and new or better chemicals. An operational 25 kW power system is expected to be operational to support sustained, systematic space processing activity beyond shuttle capability for second generation payload systems for SPACELAB and free flyer missions to study solidification and crystal growth and to process metal/alloys, glasses/ceramics, and chemicals and biologicals.

Barter, N. J.↗
NASA NTRS1978

Preliminary design trade-offs for a multi-mission stored cryogen cooler

Preliminary design studies were performed for a multi-mission solid cryogen cooler having a wide range of application for both the shuttle sortie and free flyer missions. This multi-mission cooler (MMC) is designed to be utilized with various solid cryogens to meet a wide range of instrument cooling from 10 K (with solid hydrogen) to 90 K. The baseline cooler utilizes two stages of solid cryogen and incorporates an optional, higher temperature third stage which is cooled by either a passive radiator or a thermoelectric cooler. The MMC has an interface which can accommodate a wide variety of instrument configurations. A shrink fit adapter is incorporated which allows a drop-in instrument integration. The baseline design provides cooling of approximately 1 watt over a 60 to 100 K temperature range and about 0.5 watts from 15 to 60 K for a one year lifetime. For low cooling loads and with use of the optional radiator shield, cooling lifetimes as great as 8 years are predicted.

Sherman, A.↗
NASA NTRS1981

An economy of scale system's mensuration of large spacecraft

The systems technology and cost particulars of using multipurpose platforms versus several sizes of bus type free flyer spacecraft to accomplish the same space experiment missions. Computer models of these spacecraft bus designs were created to obtain data relative to size, weight, power, performance, and cost. To answer the question of whether or not large scale does produce economy, the dominant cost factors were determined and the programmatic effect on individual experiment costs were evaluated.

Deryder, L. J.↗
NASA NTRS1980

Orbiter Camera Payload System

Components for an orbiting camera payload system (OCPS) include the large format camera (LFC), a gas supply assembly, and ground test, handling, and calibration hardware. The LFC, a high resolution large format photogrammetric camera for use in the cargo bay of the space transport system, is also adaptable to use on an RB-57 aircraft or on a free flyer satellite. Carrying 4000 feet of film, the LFC is usable over the visible to near IR, at V/h rates of from 11 to 41 milliradians per second, overlap of 10, 60, 70 or 80 percent and exposure times of from 4 to 32 milliseconds. With a 12 inch focal length it produces a 9 by 18 inch format (long dimension in line of flight) with full format low contrast resolution of 88 lines per millimeter (AWAR), full format distortion of less than 14 microns and a complement of 45 Reseau marks and 12 fiducial marks. Weight of the OCPS as supplied, fully loaded is 944 pounds and power dissipation is 273 watts average when in operation, 95 watts in standby. The LFC contains an internal exposure sensor, or will respond to external command. It is able to photograph starfields for inflight calibration upon command.

Source record↗
NASA NTRS1981

A concept for high speed assembly of erectable space platforms

A simple, fully automatic assembler associated with the on-orbit assembly of tetrahedral truss platforms erected of graphite epoxy tapered columns is described. The assembler, which can operate either as a free flyer or attached to the Orbiter, is capable of constructing a platform from a full load of truss columns and node joints in 36 hours. The geometry of this electrically-driven machine is based on a compound parallelogram system which permits backward as well as lateral translations. Concepts have been developed for half-column assembly as well as for column and node joint insertion into the platform.

Cohan, H.↗
NASA NTRS1980

A large-aperture space telescope for infrared and submillimeter astronomy

The Large Aperture Telescope (LAT), which will have a diameter of 10-30 m and will operate in the 2-1000 micron wavelength range, is described. It is noted that the LAT could be carried into orbit with a single launch of the Space Transportation System and semiautomatically deployed as a free flyer with a nominal 10-yr mission duration. Servicing and instrument changes would be made at 2-yr intervals. It is pointed out that the LAT would have to be placed above the earth's atmosphere to avoid both the absorption that occurs through much of the infrared and submillimeter and the turbulence which limits spatial resolution. Important technical considerations for the LAT are discussed; they include the telescope optical form, the primary mirror material, figure control techniques, the deployment techniques, and thermal control. The science objectives and rationale for the LAT are discussed and various hardware techniques and concepts for its implementation are described.

Murphy, J. P.↗
NASA NTRS1982

Space manufacturing systems and the Space Operations Center

For the planned Space Operations Center (SOC) and envisioned space manufacturing and processes systems, the concepts of phased programs, development and operations, station-keeping orbit envelopes, propulsive harbor tugs, and aspects of servicing are discussed. The SOC three-phased program concept includes the servicing of satellites in compatible orbits and in transition to higher energy orbits. Two concepts of a free-flyer satellite are assessed, including the fuel system, and the placement of such a satellite into orbit is discussed. Finally, some services that will be provided by SOC are mentioned.

Louviere, A. J.↗
NASA NTRS1982

Small payloads for the Shuttle

The Goddard Space Flight Center, Special Payloads Division (sounding rockets) experience in applying rocket mechanical experience and technology to the Shuttle is presented. While the mechanical design loads are similar, new considerations for thermal extremes, material control and attachment structures must be included. These additional requirements have been successfully introduced in the free flyer class of payloads, Shuttle Pointed Automonous Research Tool for Astronomy (SPARTAN), and a motorized door for the Get Away Special (GAS) payloads.

Nygaard, M. A.↗
NASA NTRS1983

Earth observation system: Spacecraft design

The Earth Observation Satellite (EOS) was a study funded by NASA Langley Research Center. The study was a system investigation of the total spacecraft integration with its major subsystems and sensors. Mission optimization and ranking using various sensors was also an objective of the contract. Integrating the spacecraft and major subsystems with the large microwave radiometer was done, essentially making the radiometer a free-flyer without an external spacecraft. Another program objective was to provide design and analysis data on microwave radiometer satellites augmented with additional Earth, ocean, and atmospheric sensors. A top-down systems approach resulted in a detailed design integrating subsystems and sensors into the microwave support structure. An important objective of the program was to identify technology needs for Earth observation satellites. The definition and understanding of these design drivers are critical in order to set priorities for future EOS work.

Herbert, J. J.↗
NASA NTRS1982

Requirements for a space station

Near-term requirements which will guide the design of a manned space station in near-earth orbit are considered. A primary focus will be establishing a base for astronomical observations which demand long term integration times. Earth observation systems such as the thematic mappers and SAR can be utilized by a free flyer in sunsynchronous orbit. Biological experiments can be carried out only with pressurized modules, ultimately large enough for humans habitation. At first, expendables would be ferried up from earth, while over time the space station would become a closed-loop system. An orbital transfer vehicle is necessary for the repair of satellites stationed in higher energy orbits. The operations of the station would include checking out communications satellites before boost into GEO. Finally, the station would be the final staging point for interplanetary and/or asteroid intercept missions.

Herman, D. H.↗
NASA NTRS1983

Reflecting Schmidt imaging spectrometers

A new wide-angle imaging spectrometer configuration is proposed where an all-reflecting Schmidt camera is used with a prism spectrometer to give a field of view up to 60 deg or more. Four different designs using this approach are presented. These are the Imaging Spectrometer Free Flyer, the Shuttle Imaging Spectrometer A, the Shuttle Imaging Spectrometer B, and the Wide-Field System. These systems are capable of broadband spectral coverage from 0.4 to 2.5 microns, with footprints 20 m on a side or less, and with swath widths hundreds of kilometers; they are capable of spectral resolving powers of 200 or more.

Breckinridge, J. B.↗