Search NASA⌕ Search

SEARCH · Search NASA

Results for “Free Volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Experimental investigation of Multi-Mode heat transfer to a Free-Falling dilute particle cloud in a heated vertical tube

The development of dilute particle heat exchangers and reactors for advanced energy systems requires an understanding of the multi-mode heat transfer from a heated wall to falling particles. This study presents experimental results of the overall heat transfer coefficient for a free-falling, dilute flow of particles with solid volume fraction from 0.0005 to 0.006 corresponding to feed rates from 3.7 kg s -1 m -2 to 44 kg s -1 m -2 in a vertical, heated tube containing quiescent air at atmospheric pressure. Tube wall temperatures are varied between 300°C to 900°C while keeping the particle inlet temperature constant. The experimental results show that the overall heat transfer coefficient is a strong function of particle feed rate and surface temperature. Good agreement was obtained with prior studies conducted at comparable temperatures but lower particle feed rates (< 4 kg m -2 s -1 ). The established correlations for particle-to-wall radiation and particle-to-gas convection were used to estimate the wall-to-gas convective contribution from the measured overall heat transfer coefficient. The experimental results indicated a 4 to 6 times improvement in the wall convection in the solid-gas mixture compared to that expected from natural convection in a single-phase gas. Furthermore, the data presented here are applicable to characterize heat transfer in dilute particle heat exchangers, furnaces, and solar receivers.

14 SOLAR ENERGY↗
DOE OSTI2025

Interplay Between Metastability and Mechanically Induced Structural Instability in CsPbBr 3 Photovoltaic Perovskite

An atomic-level understanding of the underlying structural metastability is still absent in halide perovskite photovoltaic systems. Focusing on the model material CsPbBr 3 , the impact of mechanically induced atomic structure alteration is elucidated through structural modeling and X-ray diffraction measurements. Sudden Cs–Br bond breaking drives the system metastability, where the first-order transition arises from cation-halide bond strain relief by severing the corner connectivity of the PbBr 6 units. The pressure–volume and entropy terms govern the Gibbs free-energy landscape in halide perovskites. In conclusion, metastability is revealed as a critical factor limiting the performance of lead halide perovskites under extreme but natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of geometric and magnetic boundary conditions on magnetic islands in 3D force-free ideal MHD equilibria

Three-dimensional boundary features and magnetic perturbations affect the magnetic topology of the force-free ideal MHD equilibria formed within a given volume. The use of the PSI-Tet 3D finite-element equilibrium code reveals the existence of magnetic islands inside such equilibria within boundaries with three-dimensional features in configurations that directly depend on the natures of those features. Here, the nature and limits of the influence of such features are explored, as is the influence of flux boundary conditions to qualitatively identify the structure of magnetic islands in Taylor state equilibria with three-dimensional boundary conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Dynamic compression effects of H 2 ⁡O in a dynamic diamond anvil cell: Origin of metastable ice VII and its crystal growth kinetics

We report on the structural verification of metastable ice VII solidifying in the phase space of ice VI at 1.80 GPa at room temperature. Using time-resolved (TR) x-ray diffraction and TR ruby luminescence paired with high-speed microphotography utilizing a dynamic diamond anvil cell, an initial compression rate range from 0.12 to 95.84 GPa/s was explored. The solidification pressure of metastable ice VII has a potential sigmoidal dependence upon compression rate with a turnover compression rate of ∼80 GPa/s. The preferred crystallization of ice VII in the stability field of ice VI is due to the increased nucleation rate of ice VII over ice VI at 1.77 GPa that is driven by the surface energy difference between the liquid and solid phases along with the change in Gibbs free energy of solidification. The dynamic pressure-volume–compression behaviors of ice phases (VI and VII) show a lattice stiffening in both phases, especially during the compression loading. It is also found that the compression rate greatly affects the solid-solid phase transition between ice VI and VII but does not affect the liquid-solid transition between water and ice VI as much. Lastly, a third phase transition was found to occur after metastable ice VII transforms into high-density amorphous (HDA) ice, which could be a disordered hydrogen-bonded network configuration of ice VII forming out of HDA ice facilitated by the decoupling of the oxygen movement and reorientation of the H 2⁡ O molecule. These results demonstrate the complexity of a seemingly simple molecule H 2⁡ O, how it can readily change its static properties with the modification of (de)compression rate, and highlight the need to use multiple TR structural and spectroscopic probes at higher time resolutions to realize the most comprehensive understanding.

Chemical bonding↗
DOE OSTI2026

Make the Fastest Faster: Importance Mask Synthesis for Interactive Volume Visualization using Reconstruction Neural Networks

Visualizing a large-scale volumetric dataset with high resolution is challenging due to the substantial computational time and space complexity. Recent deep learning-based image inpainting methods significantly improve rendering latency by reconstructing a high-resolution image for visualization in constant time on GPU from a partially rendered image where only a portion of pixels go through the expensive rendering pipeline. However, existing solutions need to render every pixel of either a predefined regular sampling pattern or an irregular sample pattern predicted from a low-resolution image rendering. Both methods require a significant amount of expensive pixel-level rendering. In this work, we provide Importance Mask Learning (IML) and Synthesis (IMS) networks, which are the first attempts to directly synthesize important regions of the regular sampling pattern from the user’s view parameters, to further minimize the number of pixels to render by jointly considering the dataset, user behavior, and the downstream reconstruction neural network. Our solution is a unified framework to handle various types of inpainting methods through the proposed differentiable compaction/decompaction layers. Experiments show our method can further improve the overall rendering latency of state-of-the-art volume visualization methods using reconstruction neural network for free when rendering scientific volumetric datasets. Our method can also directly optimize the off-the-shelf pre-trained reconstruction neural networks without elongated retraining.

Large-scale data↗
DOE OSTI2022

The Double Chooz antineutrino detectors

This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in the detectors with the goal of measuring a fundamental parameter in the context of neutrino oscillation, the mixing angle $\theta _{13}$. The central part of the Double Chooz detectors was a main detector comprising four cylindrical volumes filled with organic liquids. From the inside towards the outside there were volumes containing gadolinium-loaded scintillator, gadolinium-free scintillator, a buffer oil and, optically separated, another liquid scintillator acting as veto system. Above this main detector an additional outer veto system using plastic scintillator strips was installed. The technologies developed in Double Chooz were inspiration for several other antineutrino detectors in the field. The detector design allowed implementation of efficient background rejection techniques including use of pulse shape information provided by the data acquisition system. The Double Chooz detectors featured remarkable stability, in particular for the detected photons, as well as high radiopurity of the detector components.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Autonomous direct freeform fabrication strategy for multi-axis additive manufacturing

Multi-axis additive manufacturing (M-AM) enables precise material deposition along both planar and curved layers, eliminating the need for support structures through a continuous material deposition approach. In contrast to conventional 2-dimensional planar layers constrained to a fixed building orientation, the deposition on freeform layers demands the specification of guided curves to determine material deposition directions which are no longer to be fixed to a build direction. There are challenges that arise when fabricating components with multiple “build” directions, necessitating the decomposition of geometries and the specification of guided curves for the resulting volumes. Furthermore, multi-axis systems introduce heightened challenges due to an increased degree of freedom in motion. Consequently, the potential risks of collision between the deposited geometry and the motion platform become a notable concern. This research proposes a freeform layering algorithm to address the challenge of seamless transitions between planar and curved layers in the process planning of M-AM. The algorithm computes 3D “printable” layers by leveraging topological information derived from the geometry to be built and integrates collision-free manufacturability considerations into the computational process. These accumulated volumes serve as a “substrate” and support volumes for subsequent deposition, allowing later layers to be built without the need for additional support material. In conclusion, the proposed method successfully devises a freeform layering approach suitable for intricate models that demand substantial support, thus enabling the fabrication of diverse geometries in a manner previously unachievable.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Facile One-Pot Nanoproteomics for Label-Free Proteome Profiling of 50–1000 Mammalian Cells

Recent advances in sample preparation enable label-free MS-based proteome profiling of small numbers of mammalian cells. However, specific devices are often required to downscale sample processing volume from the standard 50-200 µL to sub-µL for effective nanoproteomics, which greatly impedes the implementation of current nanoproteomics methods by broad proteomics research community. Here we report a facile one-pot nanoproteomics method termed SOPs-MS (Surfactant-assisted One-Pot sample processing at the standard volume coupled with MS) for convenient proteome profiling of 50-1000 mammalian cells. Building upon our recent development of SOP-MS for label-free single-cell proteomics at low µL volume (Commun Bio 2021, 4, 265), we have systematically evaluated its processing volume at 10-200 µL using 100 human cells for robust reproducible nanoproteomic analysis. The processing volume of 50 µL which is in the range of volume for standard proteomics sample preparation, has been selected for easy sample handling with benchtop micropipette. Using the commonly accessible LC-MS platform, SOPs-MS allows for reliable label-free quantification of ~1200-2700 protein groups from 50-1000 MCF10A cells. When applied to small subpopulations of mouse colon crypt cells, SOPs-MS can reveal distinct protein signatures between any two subpopulation cells with identification of ~1500-2500 protein groups for each subpopulation. SOPs-MS may pave the way for routine deep proteome profiling of small numbers of cells as well as low-input samples.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Direct Ink Writing of 3D Zn Structures as High‐Capacity Anodes for Rechargeable Alkaline Batteries

The relationship between structure and performance in alkaline Zn batteries is undeniable, where anode utilization, dendrite formation, shape change, and passivation issues are all addressable through anode morphology. While tailoring 3D hosts can improve the electrode performance, these practices are inherently limited by scaffolds that increase the mass or volume. Herein, a direct write strategy for producing template‐free metallic 3D Zn electrode architectures is discussed. Concentrated inks are customized to build designs with low electrical resistivity (5 × 10 −4 Ω cm), submillimeter sizes (200 μm filaments), and high mechanical stability (Young's modulus of 0.1–0.5 GPa at relative densities of 0.28–0.46). A printed Zn lattice anode versus NiOOH cathode with an alkaline polymer gel electrolyte is then demonstrated. This Zn||NiOOH cell operates for over 650 cycles at high rates of 25 mA cm −2 with an average areal capacity of 11.89 mAh cm −2 , a cumulative capacity of 7.8 Ah cm −2 , and a volumetric capacity of 23.78 mAh cm −3 . A thicker Zn anode achieves an ultrahigh areal capacity of 85.45 mAh cm −2 and a volumetric capacity of 81.45 mAh cm −3 without significant microstructural changes after 50 cycles.

25 ENERGY STORAGE↗
DOE OSTI2023

Dependence of predicted bulk properties of hexagonal hydroxyapatite on exchange-correlation functional

Hydroxyapatite (HA) is the main component of human bones and teeth. HA has also been widely applied in various technological fields due to its unique properties. Reliable computational simulations for this critical material often require input parameters obtained from the first-principles density functional theory (DFT) calculations with appropriate exchange–correlation functionals. Previous DFT calculations are insufficient to verify the reliabilities of various functionals, particularly as they fail to assess predictions for multiple properties of the material. In this paper, we first select 18 different functionals to calculate geometric, elastic, electronic, and thermodynamic properties of hexagonal HA bulk crystal. We find that the results from optB86b-vdW and optB88-vdW functionals with dispersion corrections have the overall best agreement with available experimental data. Then, we choose optB88-vdW functional, as well as PBE functional without dispersion corrections as a comparison, to perform extensive first-principles DFT phonon calculations under the quasiharmonic approximation. Various thermodynamic properties (including phonon contributions to internal energy, entropy, and Helmholtz free energy) and thermal parameters (including thermal expansions of volume, thermal expansion coefficients, heat capacities, isothermal bulk moduli, etc.) versus temperature are consequently obtained. By comparing these quantities, we report that the results from optB88-vdW functional have significantly better agreement with available experimental data than those from PBE functional although the latter has been widely used in previous DFT calculations for HA-based material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

One-step production of renewable adipic acid esters from mucic acid over an Ir–ReO x /C catalyst with low Ir loading

The production of adipic acid, a large-volume platform chemical, from biomass represents a petroleum-free route to manufacturing nylon and other polymers more sustainably. In this study, a one-step conversion of bioderived mucic acid to adipates is reported over a heterogeneous, bifunctional Ir–ReO x /C catalyst via deoxydehydration (DODH) and catalytic transfer hydrogenation (CTH) using isopropanol as a green solvent and reductant. With very low Ir content (0.05 wt%), the catalyst provides a low-cost option for the tandem DODH–CTH process, while still enabling reuse and regeneration for at least five cycles. The reported catalytic system generates adipates in good yield (63%) without the need for additives (acids or halogens) or high pressure H 2 . Through model reactions and spectroscopic analyses, a bifunctional DODH–CTH mechanism was supported, with the Re VI/IV redox pair as the active DODH species and Ir0 saturating the dialkene intermediate via CTH. Thermal treatment in catalyst preparation and regeneration was optimized to limit metal leaching while maintaining good activity. Further, the present work outlines a one-step deoxygenation of an aldaric acid substrate from biomass using a bimetallic catalyst of low noble metal content to an important monomer for the polymer industry. This system facilitates use in future syntheses of sustainable chemicals from renewable oxygenates where the catalyst is reusable and affordable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing free carrier plasmons in doped semiconductors using spatially resolved electron energy loss spectroscopy

We report spatially resolved measurements of free carrier collective excitations in a doped semiconductor. Using ~10 meV resolution electron energy loss spectroscopy (EELS) in an electron microscope with Å spatial resolution, we identify both surface and bulk carrier plasmons at infrared energies in a freestanding film of indium tin oxide (ITO). The interference patterns of long wavelength propagating surface carrier plasmons are revealed using spatially resolved EELS, from which we extract a dispersion relation. We further show that the energies of these plasmons vary near the surfaces and grain boundaries of the film due to band bending. Modeling based on dielectric theory agrees very well with experimental results. Finally, carrier plasmons in amorphous and crystalline ITO films are compared. These results should also be helpful for understanding the free carrier plasmons in other doped semiconductors in nanoscale volumes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Competing Magnetic Interactions and Field-Induced Metamagnetic Transition in Highly Crystalline Phase-Tunable Iron Oxide Nanorods

The inherent existence of multi phases in iron oxide nanostructures highlights the significance of them being investigated deliberately to understand and possibly control the phases. Here, the effects of annealing at 250 °C with a variable duration on the bulk magnetic and structural properties of high aspect ratio biphase iron oxide nanorods with ferrimagnetic Fe3O4 and antiferromagnetic α-Fe2O3 are explored. Increasing annealing time under a free flow of oxygen enhanced the α-Fe2O3 volume fraction and improved the crystallinity of the Fe3O4 phase, identified in changes in the magnetization as a function of annealing time. A critical annealing time of approximately 3 h maximized the presence of both phases, as observed via an enhancement in the magnetization and an interfacial pinning effect. This is attributed to disordered spins separating the magnetically distinct phases which tend to align with the application of a magnetic field at high temperatures. The increased antiferromagnetic phase can be distinguished due to the field-induced metamagnetic transitions observed in structures annealed for more than 3 h and was especially prominent in the 9 h annealed sample. Our controlled study in determining the changes in volume fractions with annealing time will enable precise control over phase tunability in iron oxide nanorods, allowing custom-made phase volume fractions in different applications ranging from spintronics to biomedical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fundamentals on dependence of volume on pressure and temperature

The common wisdom that volume decreases with pressure and increases with temperature is analyzed in terms of Hillert nonequilibrium thermodynamics in the present work. It is shown that the derivative of volume to pressure in a stable system is always negative, i.e., volume decreases with the increase of pressure, when all other natural variables of the system are kept constant. This originates from the stability requirement that the conjugate variables, such as volume and negative pressure, must change in the same direction in a stable system. Consequently, since volume and temperature are not conjugate variables, they do not have to change in the same direction and thus do change in opposite directions in both natural and man-made systems. It is shown that the decrease of volume with the increase of temperature, commonly referred as negative thermal expansion (NTE) in the literature, originates from the statistical competitions of configurations in the system when the volumes of metastable configurations are smaller than that of the ground-state configuration. As a result, it is demonstrated that the zentropy theory can concisely explain and accurately predict NTE based on the density functional theory without fitting parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pump-induced motion of an interface between competing orders

In this work, we study the motion of an interface separating two regions with different electronic orders following a short-duration pump that drives the system out of equilibrium. Using a generalized Ginzburg-Landau approach and assuming that the main effect of the nonequilibrium drive is to transiently heat the system we address the question of the direction of interface motion—in other words, which ordered region expands and which contracts after the pump. Our analysis includes the effects of differences in free-energy landscape and in order parameter dynamics and identifies circumstances in which the drive may act to increase the volume associated with the subdominant order, for example when the subdominant order has a second-order free-energy landscape while the dominant order has a first-order one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

A weighted Shifted Boundary Method for free surface flow problems

The Shifted Boundary Method (SBM) belongs to the class of unfitted (or immersed, or embedded) finite element methods and was recently introduced for the Poisson, linear advection/diffusion, Stokes, Navier-Stokes, acoustics, and shallow-water equations. By reformulating the original boundary value problem over a surrogate (approximate) computational domain, the SBM avoids integration over cut cells and the associated problematic issues regarding numerical stability and matrix conditioning. Accuracy is maintained by modifying the original boundary conditions using Taylor expansions. Hence the name of the method, that shifts the location and values of the boundary conditions. In this article, we extend the SBM to the simulation of incompressible Navier-Stokes flows with moving free-surfaces, by appropriately weighting its variational form with the elemental volume fraction of active fluid. This approach prevents spurious pressure oscillations in time, which would otherwise be produced if the total active fluid volume were to change abruptly over a time step. In fact, the proposed weighted SBM method induces small mass (i.e., volume) conservation errors, which converge quadratically in the case of piecewise-linear finite element interpolations, as the grid is refined. Finally, we present an extensive set of two- and three-dimensional tests to demonstrate the robustness and accuracy of the method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

A Unified Model of Cosmic-Ray Propagation and Radio Extreme Scattering Events from Intermittent Interstellar Structures

Intermittent magnetic structures are a plausible candidate for explaining cosmic-ray (CR) diffusion rates derived from observed CR energy spectra. Independently, studies of extreme scattering events (ESEs) of radio quasars and pulsar scintillation have hinted that very straight, large aspect ratio magnetic current sheets may be responsible for the localized large scattering of radio waves. The required shortest axis of the typical structures producing ESEs is of the same scale (∼au) as the gyroradii of ∼GeV CRs. In this Letter, we propose that the same magnetic/density sheets can produce large scattering of both CRs and radio waves. We demonstrate that the geometry and volume-filling factor of the sheets derived from quasar ESEs can explain the observed mean free path of GeV CRs without introducing free parameters. The model places constraints on the sheet geometry, such as straightness and large aspect ratio, and assumes that the statistics of the sheets are similar throughout the Galactic volume. We therefore discuss observational tests of the sheet model, which includes observations of echoes in pulsars and fast radio bursts, gravitationally lensed quasars, the distribution of ESE durations, and spatial correlations between ESE events and rotation measure fluctuations. Such tests will be enabled by upcoming wide-field radio instruments, including the Canadian Hydrogen Observatory and Radio-transient Detector and Deep Synoptic Array 2000 Antennas.

Kempski, Philipp [Princeton Univ., NJ (United Stat↗
DOE OSTI2022

Characterization of Infrequent Samples from the Concentration, Storage, and Transfer Facility: H-Area Diversion Box 1 (HDB-1) Sump Sample: January 25, 2022 Sample

Savannah River Remediation Engineering (SRR-E) requested that the Savannah River National Laboratory (SRNL) analyze the Concentration, Storage, and Transfer Facility (CSTF) samples from the following Tank Farm areas: the sump encasement, catch tank, drain cell, and waste tank annulus. In general, these CSTF samples will be analyzed on an infrequent basis and analyses will include detection for total beta/gamma, total alpha activities, density, free hydroxide, and pH measurements. This report presents characterization results for the H-Area diversion box 1 sump (HDB-1) January 2022 sample. The sample was slightly brown with a small amount of suspended fine particulates visually estimated to be less than 1% by volume. The results are measurements for total gamma, total alpha, total beta, density, free hydroxide, and pH.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗