SEARCH · Search NASA

Results for “Functional connectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2021

The UPR regulator IRE1 promotes balanced organ development by restricting TOR-dependent control of cellular differentiation in Arabidopsis

Proteostasis of the endoplasmic reticulum (ER) is controlled by sophisticated signaling pathways that are collectively called the unfolded protein response (UPR) and are initiated by specialized ER membrane-associated sensors. The evidence that complete loss-of-function mutations of the most conserved of the UPR sensors, inositol-requiring enzyme 1 (IRE1), dysregulates tissue growth and development in metazoans and plants raises the fundamental question as to how IRE1 is connected to organismal growth. To address this question, we interrogated the Arabidopsis primary root, an established model for organ development, using the tractable Arabidopsis IRE1 mutant ire1a ire1b, which has marked root development defects in the absence of exogenous stress. We demonstrate that IRE1 is required to reach maximum rates of cell elongation and root growth. We also established that in the actively growing ire1a ire1b mutant root tips the Target of Rapamycin (TOR) kinase, a widely conserved pro-growth regulator, is hyperactive, and that, unlike cell proliferation, the rate of cell differentiation is enhanced in ire1a ire1b in a TOR-dependent manner. By functionally connecting two essential growth regulators, these results underpin a novel and critical role of IRE1 in organ development and indicate that, as cells exit an undifferentiated state, IRE1 is required to monitor TOR activity to balance cell expansion and maturation during organ biogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1994

The value of electrical stimulation as an exercise training modality

Voluntary exercise is the traditional way of improving performance of the human body in both the healthy and unhealthy states. Physiological responses to voluntary exercise are well documented. It benefits the functions of bone, joints, connective tissue, and muscle. In recent years, research has shown that neuromuscular electrical stimulation (NMES) simulates voluntary exercise in many ways. Generically, NMES can perform three major functions: suppression of pain, improve healing of soft tissues, and produce muscle contractions. Low frequency NMES may gate or disrupt the sensory input to the central nervous system which results in masking or control of pain. At the same time NMES may contribute to the activation of endorphins, serotonin, vasoactive intestinal polypeptides, and ACTH which control pain and may even cause improved athletic performances. Soft tissue conditions such as wounds and inflammations have responded very favorably to NMES. NMES of various amplitudes can induce muscle contractions ranging from weak to intense levels. NMES seems to have made its greatest gains in rehabilitation where directed muscle contractions may improve joint ranges of motion correct joint contractures that result from shortening muscles; control abnormal movements through facilitating recruitment or excitation into the alpha motoneuron in orthopedically, neurologically, or healthy subjects with intense sensory, kinesthetic, and proprioceptive information; provide a conservative approach to management of spasticity in neurological patients; by stimulation of the antagonist muscle to a spastic muscle stimulation of the agonist muscle, and sensory habituation; serve as an orthotic substitute to conventional bracing used with stroke patients in lieu of dorsiflexor muscles in preventing step page gait and for shoulder muscles to maintain glenohumeral alignment to prevent subluxation; and of course NMES is used in maintaining or improving the performance or torque producing capability of muscle. NMES in exercise training is our major concern.

Currier, Dean P.↗

DOE OSTI2022

Integrated Nanotechnologies

Nanomaterials offer exceptional properties for photonic, electronic, quantum, magnetic, structural, mechanical, chemical, nuclear, and biological functionality. However, real access to enhanced functionality remains limited without connecting the nanoscale across the mesoscale to macroscale assemblies and the ability to define and control nanomaterials organization, interactions, and interfaces. Integration is essential for accessing and controlling functionality to harness nanomaterials properties while also generating new behaviors and properties. Integration thus provides a route to discovering, generating, and using intrinsic and emergent nanomaterials properties, which define the two focus areas of this leadership theme.

36 MATERIALS SCIENCE↗

NASA NTRS1981

Functions of cumulative distribution of attenuation due to rain on an interval from 9.5 Km A to 17.8 GHz

Measurement results of attenuation due to rain are reported. Cumulative distribution functions of the attenuation found in three connections are described. Differences between the distribution functions and different polarization frequencies are demonstrated. The possibilty of establishing a bond between the statistics of annual attenuation and worst month attenuation is explored.

Fedi, F.↗

DOE OSTI2023

Interfacing electron and neutrino quasielastic scattering cross sections with the spectral function in GENIE

Progress in neutrino-nucleus cross section models is being driven by the need for highly accurate predictions for the neutrino oscillation community. These sophisticated models are being developed within a microscopic description of the nucleus with the goal of encompassing all reaction modes relevant for the accelerator neutrino program. The disconnect between these microscopic models and the event generators that will be used in the next generation of experiments represents a critical obstacle that must be overcome in order to precisely measure the neutrino oscillation parameters. To this end we have developed a hadron tensor interface for lepton-nucleus quasielastic (QE) scattering within the GENIE event generator as a proof of principle, with the broader goal of creating an efficient pipeline for incorporating advanced theoretical models in event generators. As a demonstration of this interface we have implemented the spectral function model into GENIE by connecting theorist provided fortran code through the hadron tensor interface. The spectral function model offers a more complete description of the nuclear ground state, as well as the ability to provide quantifiable theoretical uncertainties. Finally, we validate this implementation and compare its predictions against data and against QE models already available in GENIE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

Xylem network connectivity and embolism spread in grapevine( Vitis vinifera L.)

Abstract Xylem networks are vulnerable to the formation and spread of gas embolisms that reduce water transport. Embolisms spread through interconduit pits, but the three-dimensional (3D) complexity and scale of xylem networks means that the functional implications of intervessel connections are not well understood. Here, xylem networks of grapevine (Vitis vinifera L.) were reconstructed from 3D high-resolution X-ray micro-computed tomography (microCT) images. Xylem network performance was then modeled to simulate loss of hydraulic conductivity under increasingly negative xylem sap pressure simulating drought stress conditions. We also considered the sensitivity of xylem network performance to changes in key network parameters. We found that the mean pit area per intervessel connection was constant across 10 networks from three, 1.5-m stem segments, but short (0.5 cm) segments fail to capture complete network connectivity. Simulations showed that network organization imparted additional resistance to embolism spread beyond the air-seeding threshold of pit membranes. Xylem network vulnerability to embolism spread was most sensitive to variation in the number and location of vessels that were initially embolized and pit membrane vulnerability. Our results show that xylem network organization can increase stem resistance to embolism spread by 40% (0.66 MPa) and challenge the notion that a single embolism can spread rapidly throughout an entire xylem network.

Wason, Jay↗

DOE OSTI2022

Database-wide hazard modelling of the onset of DIII-D tearing modes with field features

The rate of onset (hazard) of tearing modes is modelled probabilistically using statistical learning algorithms. Axisymmetric energy-density equilibrium fields are taken as raw high-dimensional input features which are reduced with principal component analysis. Signal processing of non-axisymmetric magnetics fluctuation array data provides the target information from which to learn. Model selection, visualization and calibration assessment procedures are detailed. Here, the analysis is deployed at large scale across the DIII-D tokamak database. Standard model selection criteria suggest that the energy-density post-processed feature is a better choice for modelling the onset rate compared to the non-processed equilibrium reconstruction solution. Two example applications of the learned rate function are demonstrated: (i) proximity-to-onset discharge monitoring and (ii) database analysis showing an (expected) observational global trend that the general hazard increases as a plasma performance metric increases. An important connection between the hazard function and its use as a conditional probability generator is reviewed in the Appendix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Solid-state information pattern discriminating switch

A maze-based switch generally having three functional blocks is disclosed. The first functional block handles communications by accepting an entered maze pattern from an external system controller and outputting the entered maze pattern (and optionally its directional complement) to the second functional block. The second functional block stores the maze pattern (and optionally its directional complement) to a permanent storage element and outputs the stored, entered maze pattern and its directional complement to a series of transistors in the third functional block. The third functional block is an electronic maze in which a correct maze pattern and its directional complement must be received by the transistors for the transistors to pass electrical power through the electronic maze to a connected element. The third functional block may alternatively be implemented with optical elements, optoelectronic elements, microelectromechanical elements, or elements formed by other microsystem technologies.

Galambos, Paul C.↗

DOE OSTI2024

CDL2PLC translator v0.1.0

The CDL-PLC translator aims at translating control sequences for building energy systems from the CDL CXF format to the PLCopen XML format. The CDL CXF developed at LBL within the OpenBuildingControl project, and now being standardized via ASHRAE Standard 231P, enables expressing control sequences developed in the simulation environment Modelica in a JSON format. The PLCopen XML is an existing exchange format standardized in IEC 61131-10 for Programmable Logic Controllers (PLCs) following the IEC 61131 standard as one target system of CDL among others. The translation from the CDL CXF to the PLCopen XML contributes to a seamless workflow from the model-based development of control sequences in simulation environments, which is not building practice today, and their digital implementation on building controllers, which replaces graphical and textual documents used for this purpose today. The translator is at a prototypical stage and enables, as a proof of concept, the translation of very simple control sequences composed of 4 selected function blocks out of 137 function blocks defined in CDL. The translation includes the connection of inputs and outputs of function blocks and the expression of a control function in CDL to the equivalent code in IEC 61131-3.

Walther, Karl↗

DOE OSTI2020

General Method for Determining Redox Potentials without Electrolyte

A novel method to determine redox potentials without electrolyte is presented here. The method is based on a new ability to determine the dissociation constant, $K°_d$, for ion pairs formed between any radical anion and any inert electrolyte counterion. These dissociation constants can be used to determine relative shifts of redox potential as a function of electrolyte concentration, connecting referenced potentials determined with electrochemistry (with 0.1 M electrolyte) to electrolyte-free values. Pulse radiolysis created radical anions enabling determination of equilibrium constants for electron transfer between anions of donor and acceptor molecules as a function of electrolyte concentration in THF. The measurements determined “composite equilibrium constants”, $K_{eqC}$, which contain information about the dissociation constant for the electrolyte cations, X + , with the radical anions of both the donor, $K°_d$(D –• ,X + ) and the acceptor, $K°_d$(A –• ,X + ). Dissociation constants were obtained for a selection of radical anions with tetrabutylammonium (TBA + ). The electrolyte was found to shift the reduction potentials of small molecules 1-methylpyrene and trans-stilbene by close to +130 mV whereas oligo-fluorenes and polyfluorenes experienced shifts of only (+25 ± 6) mV due to charge delocalization weakening the ion pair. These shifts for reduction of aromatic hydrocarbon molecules are smaller than shifts of +232 and +451 mV seen previously for benzophenone radical anion with TBA + and Na + respectively where the charge on the radical anion is localized largely on one C=O bond, thus forming a more tightly bound ion pair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1996

Time Varying Compensator Design for Reconfigurable Structures Using Non-Collocated Feedback

Analysis and synthesis tools are developed to improved the dynamic performance of reconfigurable nonminimum phase, nonstrictly positive real-time variant systems. A novel Spline Varying Optimal (SVO) controller is developed for the kinematic nonlinear system. There are several advantages to using the SVO controller, in which the spline function approximates the system model, observer, and controller gain. They are: The spline function approximation is simply connected, thus the SVO controller is more continuous than traditional gain scheduled controllers when implemented on a time varying plant; ft is easier for real-time implementations in storage and computational effort; where system identification is required, the spline function requires fewer experiments, namely four experiments; and initial startup estimator transients are eliminated. The SVO compensator was evaluated on a high fidelity simulation of the Shuttle Remote Manipulator System. The SVO controller demonstrated significant improvement over the present arm performance: (1) Damping level was improved by a factor of 3; and (2) Peak joint torque was reduced by a factor of 2 following Shuttle thruster firings.

Scott, Michael A.↗

NASA NTRS2006

NASA Taxonomies for Searching Problem Reports and FMEAs

Many types of hazard and risk analyses are used during the life cycle of complex systems, including Failure Modes and Effects Analysis (FMEA), Hazard Analysis, Fault Tree and Event Tree Analysis, Probabilistic Risk Assessment, Reliability Analysis and analysis of Problem Reporting and Corrective Action (PRACA) databases. The success of these methods depends on the availability of input data and the analysts knowledge. Standard nomenclature can increase the reusability of hazard, risk and problem data. When nomenclature in the source texts is not standard, taxonomies with mapping words (sets of rough synonyms) can be combined with semantic search to identify items and tag them with metadata based on a rich standard nomenclature. Semantic search uses word meanings in the context of parsed phrases to find matches. The NASA taxonomies provide the word meanings. Spacecraft taxonomies and ontologies (generalization hierarchies with attributes and relationships, based on terms meanings) are being developed for types of subsystems, functions, entities, hazards and failures. The ontologies are broad and general, covering hardware, software and human systems. Semantic search of Space Station texts was used to validate and extend the taxonomies. The taxonomies have also been used to extract system connectivity (interaction) models and functions from requirements text. Now the Reconciler semantic search tool and the taxonomies are being applied to improve search in the Space Shuttle PRACA database, to discover recurring patterns of failure. Usual methods of string search and keyword search fall short because the entries are terse and have numerous shortcuts (irregular abbreviations, nonstandard acronyms, cryptic codes) and modifier words cannot be used in sentence context to refine the search. The limited and fixed FMEA categories associated with the entries do not make the fine distinctions needed in the search. The approach assigns PRACA report titles to problem classes in the taxonomy. Each ontology class includes mapping words - near-synonyms naming different manifestations of that problem class. The mapping words for Problems, Entities and Functions are converted to a canonical form plus any of a small set of modifier words (e.g. non-uniformity NOT + UNIFORM.) The report titles are parsed as sentences if possible, or treated as a flat sequence of word tokens if parsing fails. When canonical forms in the title match mapping words, the PRACA entry is associated with the corresponding Problem, Entity or Function in the ontology. The user can search for types of failures associated with types of equipment, clustering by type of problem (e.g., all bearings found with problems of being uneven: rough, irregular, gritty ). The results could also be used for tagging PRACA report entries with rich metadata. This approach could also be applied to searching and tagging failure modes, failure effects and mitigations in FMEAs. In the pilot work, parsing 52K+ truncated titles (the test cases that were available), has resulted in identification of both a type of equipment and type of problem in about 75% of the cases. The results are displayed in a manner analogous to Google search results. The effort has also led to the enrichment of the taxonomy, adding some new categories and many new mapping words. Further work would make enhancements that have been identified for improving the clustering and further reducing the false alarm rate. (In searching for recurring problems, good clustering is more important than reducing false alarms). Searching complete PRACA reports should lead to immediate improvement.

Malin, Jane T.↗

DOE OSTI2020

Renormalization and scale evolution of the soft-quark soft function

Soft functions defined in terms of matrix elements of soft fields dressed by Wilson lines are central components of factorization theorems for cross sections and decay rates in collider and heavy-quark physics. While in many cases the relevant soft functions are defined in terms of gluon operators, at subleading order in power counting soft functions containing quark fields appear. We present a detailed discussion of the properties of the soft-quark soft function consisting of a quark propagator dressed by two finite-length Wilson lines connecting at one point. This function enters in the factorization theorem for the Higgs-boson decay amplitude of the h → γγ process mediated by light-quark loops. We perform the renormalization of this soft function at one-loop order, present a conjecture for its two-loop anomalous dimension and discuss solutions to its renormalization-group evolution equation in momentum space, in Laplace space and in the “diagonal space”, where the evolution is strictly local in the momentum variable.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1999

Design Description of the X-33 Avionics Architecture

In this paper, we provide a design description of the X-33 avionics architecture. The X-33 is an autonomous Single Stage to Orbit (SSTO) launch vehicle currently being developed by Lockheed Martin for NASA as a technology demonstrator for the VentureStar Reusable Launch Vehicle (RLV). The X-33 avionics provides autonomous control of die vehicle throughout takeoff, ascent, descent, approach, landing, rollout, and vehicle safing. During flight the avionics provides communication to the range through uplinked commands and downlinked telemetry. During pre-launch and post-safing activities, the avionics provides interfaces to ground support consoles that perform vehicle flight preparations and maintenance. The X-33 Avionics is a hybrid of centralized and distributed processing elements connected by three dual redundant Mil-Std 1553 data buses. These data buses are controlled by a central processing suite located in the avionics bay and composed of triplex redundant Vehicle Mission Computers (VMCs). The VMCs integrate mission management, guidance, navigation, flight control, subsystem control and redundancy management functions. The vehicle sensors, effectors and subsystems are interfaced directly to the centralized VMCs as remote terminals or through dual redundant Data Interface Units (DIUs). The DIUs are located forward and aft of the avionics bay and provide signal conditioning, health monitoring, low level subsystem control and data interface functions. Each VMC is connected to all three redundant 1553 data buses for monitoring and provides a complete identical data set to the processing algorithms. This enables bus faults to be detected and reconfigured through a voted bus control configuration. Data is also shared between VMCs though a cross channel data link that is implemented in hardware and controlled by AlliedSignal's Fault Tolerant Executive (FTE). The FTE synchronizes processors within the VMC and synchronizes redundant VMCs to each other. The FTE provides an output-voting plane to detect, isolate and contain faults due to internal hardware or software faults and reconfigures the VMCs to accommodate these faults. Critical data in the 1553 messages are scheduled and synchronized to specific processing frames in order to minimize data latency. In order to achieve an open architecture, military and commercial off-the-shelf equipment is incorporated using common processors, standard VME backplanes and chassis, the VxWorks operating system, and MartixX for automatic code generation. The use of off-the-shelf tools and equipment helps reduce development time and enables software reuse. The open architecture allows for technology insertion, while the distributed modular elements allow for expansion to increased redundancy levels to meet the higher reliability goals of future RLVs.

Reichenfeld, Curtis J.↗

NASA NTRS1974

A wire/extensometer method for measuring small displacements

A method has been developed for making precise point-to-point displacement measurements on critical structures under structural, thermal, or gravity loading. The technique consists of attaching the gauge to the structure at one point, and connecting it to a second point on the structure by a thin (0.25 mm) tungsten wire. The wire provides a dual function: in addition to physically connecting the gauge to a remote point, it provides a calibrating function. Tests have demonstrated that measurements can be made within a micron over a length of a meter or two, even in the presence of severe thermal shock, such as exposure to a sun gun or to a refrigerant spray.

Wilson, M. W.↗

DOE OSTI2021

Cosmological cross-correlations and nearest neighbour distributions

ABSTRACT Cross-correlations between data sets are used in many different contexts in cosmological analyses. Recently, k-nearest neighbour cumulative distribution functions (kNN-CDF) were shown to be sensitive probes of cosmological (auto) clustering. In this paper, we extend the framework of NN measurements to describe joint distributions of, and correlations between, two data sets. We describe the measurement of joint kNN-CDFs, and show that these measurements are sensitive to all possible connected N-point functions that can be defined in terms of the two data sets. We describe how the cross-correlations can be isolated by combining measurements of the joint kNN-CDFs and those measured from individual data sets. We demonstrate the application of these measurements in the context of Gaussian density fields, as well as for fully non-linear cosmological data sets. Using a Fisher analysis, we show that measurements of the halo-matter cross-correlations, as measured through NN measurements are more sensitive to the underlying cosmological parameters, compared to traditional two-point cross-correlation measurements over the same range of scales. Finally, we demonstrate how the NN cross-correlations can robustly detect cross-correlations between sparse samples – the same regime where the two-point cross-correlation measurements are dominated by noise.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2019

Average Path Profile of Atmospheric Temperature and Humidity Structure Parameters from a Microwave Profiling Radiometer

The values of the key atmospheric turbulence parameters (structure constants) for temperature and water vapor, that is, C(exp 2)(sub T), and C(exp 2)(sub Q), are highly dependent upon the vertical height within the atmosphere thus making it necessary to specify profiles of these values along the atmospheric propagation path. The remote sensing method suggested and described in this work makes use of a rapidly integrating microwave profiling radiometer to capture profiles of temperature and humidity through the atmosphere. The integration times of currently available profiling radiometers are such that they are approaching the temporal intervals over which one can possibly make meaningful assessments of these key atmospheric parameters. These integration times, coupled with the boundary effects of the Earth’s surface are, however, unconventional for turbulence characterization; the classical Kolmogorov turbulence theory and related 2/3 law for structure functions prevalent in the inertial subrange are no longer appropriate. An alternative to this classical approach is derived from first principles to account for the nuances of turbulent mechanics met with using radiometer sensing, that is, the large-scale turbulence driven by the various possible boundary conditions within the buoyancy subrange. Analytical expressions connecting the measured structure functions to the corresponding structure parameters are obtained. The theory is then applied to an experimental scenario involving radiometric profile measurements of temperature and shows very good results.

Manning, Robert M.↗

DOE OSTI2020

Cosmological angular trispectra and non-Gaussian covariance

Angular cosmological correlators are infamously difficult to compute due to the highly oscillatory nature of the projection integrals. Motivated by recent development on analytic approaches to cosmological perturbation theory, in this paper we present an efficient method for computing cosmological four-point correlations in angular space, generalizing previous works on lower-point functions. This builds on the FFTLog algorithm that approximates the matter power spectrum as a sum over power-law functions, which makes certain momentum integrals analytically solvable. The computational complexity is drastically reduced for correlators in a "separable" form—we define a suitable notion of separability for cosmological trispectra, and derive formulas for angular correlators of different separability classes. As an application of our formalism, we compute the angular galaxy trispectrum at tree level, with and without primordial non-Gaussianity. This includes effects of redshift space distortion and bias parameters up to cubic order. We also compute the non-Gaussian covariance of the angular matter power spectrum due to the connected four-point function, beyond the Limber approximation. Finally, we demonstrate that, in contrast to the standard lore, the Limber approximation can fail for the non-Gaussian covariance computation even for large multipoles.

79 ASTRONOMY AND ASTROPHYSICS↗