Fundamental Studies of Tritium Diffusivity and Formation on the Surfaces of Defective LiAlO 2 Pellets
One of the important components of tritium-producing burnable absorber rods (TPBAR) is the γLiAlO 2 layer used in the form of an annular ceramic pellet enriched with the 6 Li isotope. Within TPBAR architecture, this oxide is located between the zircaloy-4 liner and nickel-plated zircaloy-4 tritium getter. When irradiated in a pressurized water reactor (PWR), the 6 Li pellets absorb neutrons, simulating the nuclear characteristics of a burnable absorber rod, and produce tritium ( 3 H, T). The 3 H specie chemically reacts with the metal getter, leading to the formation of a metal hydride. Accurate analysis of the 3 H transport through the ceramic pellets and the barrier/cladding system is hampered by the lack of fundamental data about the hydrogen isotope solubility and diffusivity. In TPBAR architecture, between the γ-LiAlO 2 pellet and the Ni-plated Zircaloy-4 getter (or liner), there is a gas gap. After 3 H diffuses from bulk γ-LiAlO 2 to its surface, it is possible that different 3 H species (such as T, T 2 , T 2 O, and OT, etc.) are formed on this surface which can then get into the gas gap region. Furthermore, upon recombination and desorption molecular tritium can be formed on the γ-LiAlO 2 surface. Therefore, exploring the formation of 3 H-related species on γ-LiAlO 2 surface becomes very important as an integral part of the study of 3H solubility and diffusivity in the pellets.