SEARCH · Search NASA
Results for “GETs”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lunar Get-Away-Special - Exploring the moon with a miniature electrically propelled spacecraft
A spacecraft and mission concept designed to carry out a search for water at the lunar poles is described. The main elements of the concept are solar-electric propulsion, a miniature spacecraft, and a highly focused scientific mission. The major challenges to the spacecraft design were the mass and volume limits of the GAS canister, the incorporation of solar electric propulsion, and the high radiation exposure in the Van Allen belt. The capability of ion drive in carrying out high-performance missions is demonstrated.
The Chinese student space shuttle get-way-special program
The first Chinese Getaway Special program is described. Program organization, the student proposal evaluation procedure, and the objectives of some of the finalist's experiments are covered. The two experiments selected for eventual flight on the space shuttle are described in detail. These include: (1) the control of debris in the cabin of the space shuttle; and (2) the solidification of two immiscible liquids in space.
A get started approach for resource processing
A low-risk, high-value approach to implementing resource processing is presented. The design utilizes processing plants at Deimos and Mars, a fueling depot in a Mars parking orbit, and small shuttles transferring crew and cargo between sites. The system fuels Mars ascent and descent states and the earth-return stage. Fueling at Mars reduces launch requirements by 25 percent, or, alternatively, enables the substitution of payload for fuel on a near 1:1 basis and thereby triples the payload delivered to Mars.
Getting water from the water of hydration on Mars
Both Viking landers found evidence of water in small concentration in the soils of Mars. Using the gas chromatograph mass spectrometer the soil samples on Mars were heated to 500 C to release the water. This result lead researchers to believe that the water in the soil of Mars was tightly bound in a hydration state. In the laboratory several Mars analog soils and a few bench mark soils were run through a microwave to determine the amount of water released using this method. The results suggest that sufficient water can be obtained using this method to augment the activities of a human base on Mars.
Getting started on metrics - Jet Propulsion Laboratory productivity and quality
A review is presented to describe the effort and difficulties of reconstructing fifteen years of JPL software history. In 1987 the collection and analysis of project data were started with the objective of creating laboratory-wide measures of quality and productivity for software development. As a result of this two-year Software Product Assurance metrics study, a rough measurement foundation for software productivity and software quality, and an order-of-magnitude quantitative baseline for software systems and subsystems are now available.
Getting lunar ilmenite - From soils or rocks?
Lunar soils or rocks can be mined as sources of ilmenite for producing oxygen. However, separable crystals of loose ilmenite in lunar soils are rare (less than 2 percent) and small (less than 200 microns); most ilmenite in the regolith is locked together with silicate minerals as rock fragments. If fragmentation of rock sources must be attempted to win appreciable amounts of ilmenite (approximately 10 percent or more), selective collection of high-Ti basalt fragments larger than 1 cm for fragmentation and ilmenite beneficiation may be advantageous over extensive processing of fine lunar soil. Many alternative processing schemes for fragmenting rocks on the Moon have been proposed; one process which was tested early in the Apollo program successfully disaggregated lunar and terrestrial basalts by passive exposure to low-pressure alkali (K) vapor. This process is worthy of reinvestigation.
V/STOL gets a lift
The concept of a supersonic STOVL that could offer enhanced mission capability, survivability, operational flexibility, and utility over conventional aircraft is presented. Emphasis is currently on design studies, CFD work, small- and large-scale wind tunnel tests, simulation activities, flight experiments, and ground environment experiments. Propulsion system technology centers about the adaptation of existing or off-the-shelf engines. Concepts under study include separate flow in hover, gas-driven lift fan, and shaft-driven lift fan. NASA is examining generic valve and ducting configurations with airflow at ambient temperature and at temperatures up to 1000 F to gather pressure loss and heat transfer data. Advanced civil rotorcraft technologies examined include high-efficiency/dual-mode components such as torque converters; lightweight, quiet transmissions; and variable geometry power turbines; along with dual-function or convertible engines.
Getting expert systems off the ground: Lessons learned from integrating model-based diagnostics with prototype flight hardware
As an initial attempt to introduce expert system technology into an onboard environment, a model based diagnostic system using the TRW MARPLE software tool was integrated with prototype flight hardware and its corresponding control software. Because this experiment was designed primarily to test the effectiveness of the model based reasoning technique used, the expert system ran on a separate hardware platform, and interactions between the control software and the model based diagnostics were limited. While this project met its objective of showing that model based reasoning can effectively isolate failures in flight hardware, it also identified the need for an integrated development path for expert system and control software for onboard applications. In developing expert systems that are ready for flight, artificial intelligence techniques must be evaluated to determine whether they offer a real advantage onboard, identify which diagnostic functions should be performed by the expert systems and which are better left to the procedural software, and work closely with both the hardware and the software developers from the beginning of a project to produce a well designed and thoroughly integrated application.
Life sciences get important new data from Spacelab mission. III
An investigation of the effects of weightlessness on the human body is reported that was conducted on a flight of the Space Shuttle Columbia. Experiments are described regarding zero-gravity effects on the human perception of balance, the growth of lymphocytes, and general life-sciences examinations of body mass, body fluid, pulmonary parameters, and echocardiograph imaging. Specific attention is given to the day-to-day operations of the mission, and particular emphasis is given to the study of rodents and jellyfish reacting to microgravity.
Why pilots are least likely to get good decision making precisely when they need it most
Studies of commercial aircraft incidents and accidents indicate that, in flight conditions not covered by standard operating procedures, as well as when the environment is saturated with information or unmanaged stress, cognitive shortcuts dominate aircrews' decisionmaking processes. Multidisciplinary research on such situations with high-fidelity simulators becomes critically important, as do psychometric tools which examine vigilance, personality resiliency before stressful conditions, and decisional and interpersonal mind-sets.
Getting up to speed in hypersonic structures
An overview is presented of some of the hypersonic technology that will become the baseline for more advanced commercial aerospace systems and new military transportation systems for carrying astronauts and equipment into space. Attention is given to the X-15 aeronautical research program, the X-20 DYNA-SOAR, and the current X-30 National Aerospace Plane. Consideration is given to FEM analysis methods, modal testing conducted to measure the structure's resonant frequencies, dampings, and mode shapes, and high-temperature, high-speed wind tunnel testing and in-flight measurement of steady and unsteady pressures at Mach 3 and above.
A Pennsylvania State University/General Electric Get Away Special (GAS) experiment
We describe four student-designed experiments by the Pennsylvania State University, which are planned for a GAS canister. The four experiments will measure: the effects of radiation on semiconductors; orbital debris impacts; the Space Shuttle's magnetic field; and the photoelectric yield of several different materials. These experiments are the result of the efforts of more than one hundred students.
Preparing safety data packages for experimenters using the Get Away Special (GAS) carrier system
The implementation of NSTS 1700.7B and more forceful scruntiny of data packages by the Johnson Space Flight Center (JSC) lead to the development of a classification policy for GAS/CAP payloads. The purpose of this policy is to classify experiments using the carrier system so that they receive an appropriate level of JSC review (i.e., one or multiphase reviews). This policy is based on energy containment to show inherent payload safety. It impacts the approach to performing hazard analyses and the nature of the data package. This paper endeavors to explain the impact of this policy as well as the impact of recent JSC as well as Kennedy Space Flight Center (KSC) 'interpretations' of existing requirements. The GAS canister does adequately contain most experiments when flown in the sealed configuration (however this must be shown, not merely stated). This paper also includes data package preparation guidelines for those experiments that require an opening door which often present unique safety issues.
How to get on board Space Station Freedom
Space Station Freedom will accommodate researchers with interests in science, technology and commercial applications. NASA sponsors will be responsible for selecting the U.S. researchers for Space Station Freedom. The four NASA sponsors are: Office of Space Science and Applications (OSSA), Office of Aeronautics and Space Technology (OAST), Office of Commercial Programs (OCP), and the Office of Space Flight (OSF). The areas of research responsibility for each sponsor are presented. The researcher solicitation vehicles used by OSSA and OAST and the methodology for researchers seeking sponsorship from OCP and OSF as well as the pricing policy are discussed. Descriptions of flight planning, payload integration and operations functions are presented. Three categories of payloads and their respective payload integration times are discussed. Researchers are advised to contact a NASA sponsor and a source which lists the points of contact for the NASA sponsors is noted.
How to get unlimited observing time on a 4 metre telescope
As the astronomical community moves ever more towards fewer and larger telescopes it is not just desirable but essential to make the maximum possible use of these new facilities. The Hitchhiker parallel CCD camera has been specially designed to increase the scientific output of a large telescope by imaging the off-axis field of view. The large data set collected by this instrument consists of deep CCD multicolor data of the distant Universe and is extremely well suited to the study of faint galaxies and their evolution, as well as other areas. The instrument's design and some of its projects are briefly discussed below and demonstrates the scientific value such instruments could have if incorporated on all new telescopes.
Limited Duration of Candidate Materials Exposure Experiment (LDCE): A Complex Autonomous Payload (CAP) using a Get Away Special (GAS) canister
CMSS has designed, fabricated, qualified and flown the LDCE payload as a cost effective space flight hardware to conduct exposure of materials to the space environment. The hardware has been qualified for 10 missions, utilizing a GAS Canister, supplied by Goddard Space Flight Center. Results of the first series of LDCE experiments have shown that the hardware performed as expected.
How to handle 6GBytes a night and not get swamped
The Macho Project has undertaken a 5 year effort to search for dark matter in the halo of the Galaxy by scanning the Magellanic Clouds for micro-lensing events. Each evening's raw image data will be reduced in real-time into the observed stars' photometric measurements. The actual search for micro-lensing events will be a post-processing operation. The theoretical prediction of the rate of such events necessitates the collection of a large number of repeated exposures. The project designed camera subsystem delivers 64 Mbytes per exposure with exposures typically occurring every 500 seconds. An ideal evening's observing will provide 6 Gbytes of raw image data and 40 Mbytes of reduced photometric measurements. Recognizing the difficulty of digging out from a snowballing cascade of raw data, the project requires the real-time reduction of each evening's data. The software team's implementation strategy centered on this non-negotiable mandate. Accepting the reality that 2 full time people needed to implement the core real-time control and data management system within 6 months, off-the-shelf vendor components were explored to provide quick solutions to the classic needs for file management, data management, and process control. Where vendor solutions were lacking, state-of-the-art models were used for hand tailored subsystems. In particular, petri nets manage process control, memory mapped bulletin boards provide interprocess communication between the multi-tasked processes, and C++ class libraries provide memory mapped, disk resident databases. The differences between the implementation strategy and the final implementation reality are presented. The necessity of validating vendor product claims are explored. Both the successful and hindsight decisions enabling the collection and processing of the nightly data barrage are reviewed.