Search NASA⌕ Search

SEARCH · Search NASA

Results for “GHG emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Recovery of Natural Gas Equipment Emissions into Gas Compression Engines for the Reduction of Potential Greenhouse Gas Emissions

Since the turn of the millennium, the United States (U.S.) oil and natural gas (ONG) industry has nearly doubled its natural gas production rate. As a result, the ONG industry has recently come under increasing scrutiny for its contributions to greenhouse gas (GHG) emissions. Consequently, various solutions to this problem have been proposed and formulated to reduce the impacts of GHG emissions on the environment. West Virginia University (WVU) have found it important to research the impacts of recovering vented gas streams into prime-mover engines. The U.S. Department of Energy (DOE) and National Energy Technology Laboratory (NETL) have granted WVU funding to research and develop a “Methane Mitigator” (M2) - a “Scalable Vent Mitigation Strategy to Simultaneously Reduce Methane Emissions and Fuel Consumption from the Compression Industry.” One of the main areas of interest for this research was the collection of emissions from natural gas equipment into a Caterpillar G3508J natural gas compression engine. The parameters being analyzed from the engine were brake-specific emissions and power output. The emissions sources considered for this research were pneumatic controllers (PCs), reciprocating compressor vents, and the engine’s open crankcase breather. The compressor vent and PC emissions were simulated using a mass flow controller (MFC) and flowed into the engine using two separate methods: (1) directly into the air intake, and (2) through a retrofitted closed crankcase ventilation system (CCV), serving as a buffer volume. The crankcase emissions were quantified without the CCV, and the impact on exhaust emissions from circulating the crankcase gases into the intake was measured. The simulated compressor vent and PC flows from the MFC had limited effect on the steady state operation of the engine and resulting performance. When the simulated flows were fed directly into the engine’s air intake, the changes within the engine’s continuous performance and emission parameters were larger but lasted for shorter durations. Conversely, when the simulated flows were fed into the CCV before entering the air intake, the changes in the engine’s performance and emission parameters were less pronounced for continuous analysis but lasted for longer durations. In either case, the continuous emission changes in both emissions and performance varied in size depending on the test scenario being run, but the cycle average changes in emissions and performance showed little impact overall compared to the engine’s baseline operation. As a result, the inclusion of a CCV shows a decrease in baseline carbon dioxide equivalent (CO2-eq.) engine emissions (from combined exhaust and open crankcase) of almost 4%. Likewise, the CCV inclusion reduced baseline total methane (CH4) from combined exhaust and open crankcase by upwards of 16%. These atmospheric emissions only decreased further with the inclusions of collected PC and compressor vent flows. The resulting changes in time-averaged rated exhaust behavior (or lack thereof) prove that the proposed M2 system could likely be deployed at sites with modern lean-burn natural gas engines as a viable option for reducing and eliminating potential GHG sources that would have otherwise been unutilized as energy sources.

03 NATURAL GAS↗
DOE OSTI2022

City-level impacts of building tune-ups: Findings from Seattle's building tune-ups program

Many U.S. cities are implementing policies to reduce greenhouse gas (GHG) emissions of their buildings. These range from building energy benchmarking and disclosure to building performance standards (BPS) that require buildings to meet specific targets of energy use or emissions. The City of Seattle adopted a climate action plan in 2013 that set a goal of zero net GHG emissions in the road transportation, buildings, and waste sectors by 2050, with a number of near and long term actions. Seattle implemented mandatory building tune-ups in 2016, applying to commercial buildings larger than 50,000 sqft. Building tune-ups1 involve assessment and implementation of operational and maintenance (O + M) improvements to achieve energy and water efficiency, such as changes to thermostat set points or adjusting lighting or irrigation schedules. Seattle's tune-ups program covered 27 such improvements in HVAC, lighting, domestic hot water, and envelope systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

A Biomass Pyrolysis Oil as a Novel Insect Growth Regulator Mimic for a Variety of Stored Product Beetles

Abstract As fumigants face increasing regulatory restrictions, resistance, and consumer pushback, it is vital to expand the integrated pest management (IPM) chemical toolkit for stored products. The production of biomass derived insecticides (e.g., bio-oil fraction) from byproducts of biofuel production may be a promising alternative source of chemistries for controlling stored product insects. These potential insecticidal bio-oils were fractionated based on boiling points (ranging from 115 to 230°C in one series and 245–250°C in another). Fractions were analyzed using GC-MS, and were found to be unique in composition. The lethality of these fractions was tested on Tribolium castaneum, Tribolium confusum, and Oryzaephilus surinamensis (L.) (Coleoptera: Silvanidae). Fractions were tested at concentrations ranging from 5–260 mg/ml to screen for efficacy against adults for durations of 2–8 hr sprayed on concrete arenas. In addition, a separate assay evaluated adult emergence of larvae after 6 wk with supplemental food in arenas, while repellency was evaluated against four stored product insect species in a laminar wind tunnel. A greenhouse gas (GHG) emissions life cycle assessment was also performed, which found the use of the bio-oil fraction could reduce GHG emissions associated with the insecticide supply chain by 25–61% relative to a fossil-fuel based insecticide or pyrethroid. While adults were largely unaffected, we found that larval emergence was significantly suppressed compared to controls by roughly half or more. We also determined that there was minimal repellency to most fractions by most species. We conclude that the use of bio-oil fractions is a climate-friendly choice that may support IPM programs.

09 BIOMASS FUELS↗
DOE OSTI2025

Conversion of Waste PET Plastic to Aramid Fiber

A three-step synthesis was used to convert waste polyethylene terephthalate (PET) into the high value polymer, poly-para-phenylene terephthalamide (PPTA), used in the production of high strength aramid fiber, such as Kevlar. Improvements to the polymerization reaction by addition of calcium chloride to the solvent, N-methyl-2-pyrrolidone (NMP), and rigorous anhydrous conditions enabled the production of a PET-derived PPTA with a 4.15 dL/g inherent viscosity in sulfuric acid that is amenable to fiber spinning. PPTA fibers were spun using a wet spinning apparatus under varied process parameters to assess their impact on fiber surface morphology, diameter, and the mechanical properties of the fibers. Select fibers were subjected to a post-spinning heat treatment at 150 °C , which improved the tensile strength and modulus by 100% and 30%, respectively, relative to the as-spun fibers. Techno-economic and life cycle analyses were conducted to evaluate the economic feasibility and the life-cycle greenhouse gases (GHG) emissions of the approach. In conclusion, the results suggest the potential for up to a 30% cost reduction, and comparable GHG emissions against conventional petroleum-based processes.

Lifecycle Analysis↗
DOE OSTI2026

Data for Greenhouse Gas Accounting Procedures in Low Carbon Fuel Policies Overlook the Spatial Variability of Miscanthus-Derived Sustainable Aviation Fuel

Low carbon fuel policies such as the U.S. Renewable Fuel Standard (RFS), Canada Clean Fuel Regulations (CFR), and California Low Carbon Fuel Standard (LCFS) as well as the 45Z tax credit are intended to reduce greenhouse gas (GHG) emissions from transportation. Cellulosic feedstocks, optimized biorefineries, and favorable farming locations can significantly reduce biofuel carbon intensity (CI). Despite advances in field-to-fuel GHG monitoring and flexibility in resource allocation within biorefineries (e.g., governing net electricity production), rigid CI accounting procedures in current policies may limit CI responsiveness across candidate sites and processing facilities. This work examines a hypothetical biomass-to-sustainable aviation fuel (SAF) pathway using miscanthus and alcohol-to-jet (i) to demonstrate how GHG accounting requirements drive estimates of biofuel CIs and (ii) to explore potential CI and financial implications of scenario-specific life cycle assessment (LCA). Results demonstrate that GHG accounting using the CFR/LCFS can reasonably account for distinct levels of net electricity production by a biorefinery, but only the CFR yields similar CI sensitivity to spatially explicit factors (feedstock CI, grid electricity CI) as scenario-specific LCA: most GHG accounting frameworks do not capture CI variation across candidate sites in the United States. Ultimately, this work demonstrates the importance of LCA methodological specifications in low carbon fuel policies and tax credits.

Miscanthus↗
DOE OSTI2020

Methane and nitrous oxide porewater concentrations and surface fluxes of a regulated river

Greenhouse gas (GHG) emissions from rivers are a critical missing component of current global GHG models. Their exclusion is mainly due to a lack of in-situ measurements and a poor understanding of the spatiotemporal dynamics of GHG production and emissions, which prevents optimal model parametrization. We combined simultaneous observations of porewater concentrations along different beach positions and depths, and surface fluxes of methane and nitrous oxide at a plot scale in a large regulated river during three water stages: rising, falling, and low. Our goal was to gain insights into the interactions between hydrological exchanges and GHG emissions and elucidate possible hypotheses that could guide future research on the mechanisms of GHG production, consumption, and transport in the hyporheic zone (HZ). Results indicate that the site functioned as a net source of methane. Surface fluxes of methane during river water stages at three beach positions (shallow intermediate and deep) correlated with porewater concentrations of methane. However, fluxes were significantly higher in the intermediate position during low water stage, suggesting that low residence time increased methane emissions. Vertical profiles of methane peaked at different depths, indicating an influence of the magnitude and direction of the hyporheic mixing during the different river water stages on methane production and consumption. The site acted as either a sink or a source of nitrous oxide depending on the elevation of the water column. Nitrous oxide porewater concentrations peaked at the upper layers of the sediment throughout the different water stages. River hydrological stages significantly influenced porewater concentrations and fluxes of GHG, probably by influencing heterotrophic respiration (production and consumption processes) and transport to and from the HZ. Our results highlight the importance of including dynamic hydrological exchanges when studying and modeling GHG production and consumption in the HZ of large rivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Chamber Flux and Porewater Concentration of CH4, CO2 and N2O, 2018, Columbia River bank at the Hanford site, WA, USA

This is the corresponding observations data for the paper: Jorge A Villa; Garrett J Smith; Yang Ju; Lupita Renteria; Jordan C Angle; Evan Arntzen; Samuel F Harding; Huiying Ren; Xingyuan Chen; Audrey H Sawyer; Emily B Graham; James C Stegen; Kelly C Wrighton; Gil Bohrer (2020) Methane and nitrous oxide porewater concentrations and surface fluxes of a regulated river. Science of the Total Environment.Greenhouse gas (GHG) emissions from rivers are a critical missing component of current global GHG models. Their exclusion is mainly due to a lack of in-situ measurements and a poor understanding of the spatiotemporal dynamics of GHG production and emissions, which prevents optimal model parametrization. We combined simultaneous observations of porewater concentrations along different beach positions and depths, and surface fluxes of methane and nitrous oxide at a plot scale in a large regulated river during three water stages: rising, falling, and low. Our goal was to gain insights into the interactions between hydrological exchanges and GHG emissions and elucidate possible hypotheses that could guide future research on the mechanisms of GHG production, consumption, and transport in the hyporheic zone (HZ). Results indicate that the site functioned as a net source of methane. Surface fluxes of methane during river water stages at three beach positions (shallow, intermediate and deep) correlated with porewater concentrations of methane. However, fluxes were significantly higher in the intermediate position during the low water stage, suggesting that low residence time increased methane emissions. Vertical profiles of methane peaked at different depths, indicating an influence of the magnitude and direction of the hyporheic mixing during the different river water stages on methane production and consumption. The site acted as either a sink or a source of nitrous oxide depending on the elevation of the water column. Nitrous oxide porewater concentrations peaked at the upper layers of the sediment throughout the different water stages. River hydrological stages significantly influenced porewater concentrations and fluxes of GHG, probably by influencing heterotrophic respiration (production and consumption processes) and transport to and from the HZ. Our results highlight the importance of including dynamic hydrological exchanges when studying and modeling GHG production and consumption in the HZ of large rivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Sustainable Aviation Fuel: Reducing Emissions from Commercial Flight

Demand for jet fuel is expected to balloon over the next three decades, which adds to the aviation industry’s challenge of meeting goals for cutting aviation greenhouse gas (GHG) emissions in half by 2050.1 Sustainable aviation fuels (SAFs) made from renewable biomass and waste resources have the potential to deliver the performance of petroleum-based jet fuel but with a fraction of its carbon footprint, giving airlines solid footing for reducing GHG emissions from flight.

09 BIOMASS FUELS↗
DOE OSTI2022

Operational Emissions Accounting for Commercial Buildings

Buildings account for 30% of greenhouse gas emissions in the US. In order to aid in better decisions that reduce emissions from building operations, accurate emissions accounting is important. This report reviews existing operational GHG emission accounting approaches, frameworks, and data sources. We present the results of testing emissions accounting frameworks and emission factors with example data from two buildings and provide recommendations while using an emissions accounting framework.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Global Building Decarbonization Trends and Strategies

It is evident from extreme weather patterns that climate change is impacting the whole world. The consequences in the form of unpredicted severe weather conditions, hurricanes, floods, and wildfires have been disrupting national economies and affecting lives across the globe. As the global economy is recovering from the COVID-19 pandemic, the temporary drop in greenhouse gas (GHG) emissions mainly caused due to travel bans and economic slowdowns is no longer the case and, moving forward, controlling the increase in GHG emissions has emerged as a global challenge. The impact of climate change has enabled an acknowledgement of the challenge and this coincided with the rapid development of clean energy technologies for buildings, transportation, and industrial sectors, while ensuring a significant reduction in costs for their wide implementation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Life cycle assessment of railway ties fabricated with ductile cementitious composites and carbonation curing

This paper evaluates the lifecycle economic and environmental benefits of implementing CO 2 utilization and storage within advanced engineered cementitious composite (ECC) railway ties. Using CO 2 -treated ECC ties can yield lifecycle benefits primarily due to enhanced material properties – increased lifespan in this case – instead of due to the stored CO 2 that would otherwise enter the atmosphere. Sequestration-based policies such as 45Q in the United States would therefore not incentivize deployment of ECC railway ties, despite their considerable CO 2 avoidance opportunities. To reach these conclusions, cradle-to-grave lifecycle models were developed for ECC ties and conventional concrete ties and evaluated under 1000 possible use-phase scenarios. The models incorporated premature tie failures – consistent with real-world observations – that were used to study a wide range of non-linear impacts arising from the random nature of tie failures and replacements. The results show that past studies that neglected premature failure of ties may have underestimated lifecycle greenhouse gas (GHG) emissions of concrete rail ties by nearly three times. Overall, servicing a track with ECC ties instead of concrete ties can reduce the lifecycle costs and GHG emissions by 12% and 21% respectively, based on median values of 1000 model run results. The expected benefits would be larger for entities like Amtrak that plan to expand concrete tie infrastructure despite significant challenges with premature concrete tie failures. Furthermore, the results of this study suggest that the lifespan of ECC ties needs to be at least 25% longer than concrete ties to achieve net lifecycle benefits. The possibility of this should be tested and confirmed under real-world conditions.

42 ENGINEERING↗
DOE OSTI2026

Life Cycle Analysis of Growing Canola for Biofuel Production in the United States

This study quantifies and compares the life cycle greenhouse gas (GHG) emissions of renewable diesel (RD), sustainable aviation fuel (SAF), and biodiesel (BD) produced from two U.S. canola production systems: 1) emerging intermediate winter canola, typically grown in double- or relay-cropping systems between the growing seasons of main crops, and 2) main canola, mostly spring canola but also including winter canola, which are grown as primary crops occupying the field for a full growing season. Using the Research and Development version of the Greenhouse gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) model and the most up-to-date life cycle inventory data─field trial data for intermediate winter canola (>37,000 acres) and recent national survey data for spring canola─this life cycle analysis (LCA) estimates the direct emissions from canola cultivation and harvest, the conversion of canola into fuels, fuel transportation, and combustion. In addition, we account for market-mediated emissions associated with a scenario of 0.5 billion gallons per year of spring canola-based biofuels, including induced land use change (ILUC), induced other crop (nonfeedstock) production changes, and induced livestock production changes. For intermediate winter canola, these market-mediated effects were not modeled, as ILUC is expected to be negligible due to its integration into existing rotations, and data are currently insufficient to reliably quantify other market-mediated changes. The estimated life cycle direct emissions of RD/SAF derived from intermediate winter canola and main spring canola are about 32 and 33 g of CO2-equivalent per megajoule of fuel (g CO 2 e/MJ), respectively. Corresponding emissions for BD from intermediate winter canola and main spring canola are about 30 and 31 g of CO 2 e/MJ, respectively. Farming is the dominant emissions source for both canola systems, with intermediate winter canola and main spring canola emitting about 19 and 20 g of CO 2 e/MJ, respectively. ILUC and other induced changes increase emissions of main spring canola-derived RD/SAF and BD by about 18 and 17 g of CO 2 e/MJ, respectively. These results indicate that the GHG emissions of biofuels produced from the two canola systems may differ substantially due to the different land use dynamics of the systems.

biodiesel↗
DOE OSTI2023

Microbial sensitivity to temperature and sulfate deposition modulates greenhouse gas emissions from peat soils

Abstract Peatlands are among the largest natural sources of atmospheric methane (CH 4 ) worldwide. Microbial processes play a key role in regulating CH 4 emissions from peatland ecosystems, yet the complex interplay between soil substrates and microbial communities in controlling CH 4 emissions as a function of global change remains unclear. Herein, we performed an integrated analysis of multi‐omics data sets to provide a comprehensive understanding of the molecular processes driving changes in greenhouse gas (GHG) emissions in peatland ecosystems with increasing temperature and sulfate deposition in a laboratory incubation study. We sought to first investigate how increasing temperatures (4, 21, and 35°C) impact soil microbiome–metabolome interactions; then explore the competition between methanogens and sulfate‐reducing bacteria (SRBs) with increasing sulfate concentrations at the optimum temperature for methanogenesis. Our results revealed that peat soil organic matter degradation, mediated by biotic and potentially abiotic processes, is the main driver of the increase in CO 2 production with temperature. In contrast, the decrease in CH 4 production at 35°C was linked to the absence of syntrophic communities and the potential inhibitory effect of phenols on methanogens. Elevated temperatures further induced the microbial communities to develop high growth yield and stress tolerator trait‐based strategies leading to a shift in their composition and function. On the other hand, SRBs were able to outcompete methanogens in the presence of non‐limiting sulfate concentrations at 21°C, thereby reducing CH 4 emissions. At higher sulfate concentrations, however, the prevalence of communities capable of producing sufficient low‐molecular‐weight carbon substrates for the coexistence of SRBs and methanogens was translated into elevated CH 4 emissions. The use of omics in this study enhanced our understanding of the structure and interactions among microbes with the abiotic components of the system that can be useful for mitigating GHG emissions from peatland ecosystems in the face of global change.

AminiTabrizi, Roya↗
DOE OSTI2025

Comprehensive Life Cycle Analysis of Methanol Production and Methanol-to-Diesel Conversion

Methanol is a strategic chemical and intermediate in the manufacture of synthetic diesel, due to its versatility, diesel’s compatibility with existing infrastructure, and their role in industrial and transport applications. Conventional production methods for methanol, primarily steam methane reforming (SMR), rely on natural gas and are subject to the price variability due to market conditions and geopolitical events. They are also associated with greenhouse gas (GHG) emissions. Methanol and synthetic diesel production could be integrated with nuclear energy to stabilize fuel prices and insulate pricing from outside geopolitical events due to the relative stability of nuclear fuel as compared to natural gas. This could lead to increased transportation fuel security, reliability and resilience. An added benefit is the abatement of emissions when substituting nuclear energy for conventional energy from natural gas. This report presents a comprehensive life cycle analysis(LCA) framework which was developed to evaluate the GHG emissions reduction potential associated with nuclear integrated methanol production, methanol-to-diesel upgrading, and end-use combustion. Gate-to-gate methanol production and cradle-to-grave emissions were evaluated in, starting with a business-as-usual (BAU) SMR-based methanol plant, and then considering stepwise nuclear integration. Methanol-to-diesel (MTD) conversion was evaluated accounting for nuclear energy integration and hydrogen production via high-temperature steam electrolysis (HTSE) using electricity either from the grid or from a dedicated nuclear power system. This multi-step process diverts stable and reliable nuclear energy into the transportation sector by upgrading low energy dense natural gas into liquid fuels fully compatible with existing infrastructure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

California's harvested wood products: A time-dependent assessment of life cycle greenhouse gas emissions

Following life-cycle assessment (LCA) methodology, this study presents a state-level estimation of embodied carbon of wood products harvested in 2019 from California and subsequently processed, manufactured, transported, used, and disposed at the end-of-life (EoL). In a conventional static approach to LCA, all GHG emissions were aggregated and considered to occur at year 0 of the given time horizon (500 years in this study) and used a static characterization factor (CF). In dynamic LCA, GHG emissions occurring in different years were considered, and their global warming impact (GWI) was determined using a time-dependent CF over the selected time horizon of 500 years. Four scenarios were developed to examine the impact of EoL choices on GWI. It was found that dynamic GWI for all scenarios ranged from 0.27 to 0.93 million tonne CO₂e, which were 45–73 % lower than those estimated with static LCA approach, indicating that the static LCA approach could lead to an underestimation of the benefits of substituting wood for non-wood products, compared to those based on dynamic LCA approach. This analysis also demonstrated that the choice of EoL treatment option is a key factor affecting the estimated GWI as it directly determines the annual emission of GHGs released into atmosphere and subsequently their warming effect depending on the time harvested wood products (HWPs) spend in the horizon of assessment. Altogether, the dynamic LCA performed in this study enabled more robust interpretations of embodied carbon by including temporal boundaries associated with the HWPs life cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Boosting climate change mitigation potential of perennial lignocellulosic crops grown on marginal lands

Nitrogen fertilizer (N F ) is a major uncertainty surrounding the greenhouse gas (GHG) emissions of lignocellulosic biofuels. NF enhances agronomic yields and soil C inputs via plant litters, but results in soil organic carbon (SOC) decomposition, soil N 2 O fluxes, and a large fossil energy footprint. Thus, whether NF is beneficial or detrimental to the GHG mitigation of biofuels is unknown. Here, we show the potential GHG mitigation of fertilizing switchgrass (Panicum virgatum) at the NF rate that minimizes net GHG emissions across 7.1 million ha of marginal lands in the Midwest US, with long-term production advantages surpassing emitted GHG by 0.66 Mg CO 2 e ha –1 yr –1 on the aggregate. Marginal lands limited by poor N fertility could see a much greater benefit, but not SOC-rich lands, limited by low precipitation, or short growing seasons. The objectives of maximizing yield and minimizing GHG overlap only in a few environments, suggesting that maximum yield will reduce the climate benefit of cellulosic biofuels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Getting lost tracking the carbon footprint of hydropower

In the transition to low-carbon electricity, well-quantified estimates of carbon dynamics are needed to ensure that emissions reduction targets are achieved. Here we review the state of the science on carbon accounting for hydropower reservoirs and identify limitations and future solutions. Nearly all research on reservoir greenhouse-gas (GHG) emissions has focused on individual reservoirs in isolation without considering their position in a freshwater network draining organic matter from upstream watersheds or the coordinated operation of reservoir cascades. Second, carbon inventories have extrapolated from a small, non-probabilistic sample of highly variable measurements of GHG emissions to unsampled reservoirs. A stronger statistical foundation is needed to estimate a global inventory and its uncertainty. Third, attribution to hydropower is based on ranks assigned to reservoir purpose. Instead, the physical influence of hydropower on carbon dynamics could be directly measured. Fourth, current carbon-accounting practices neglect time. A time-varying approach would quantify variation in emissions for electricity portfolios from changes in the fuel mix at different times and account for ancillary services, i.e., the ability to support the grid when variable renewables are not available without using natural gas. Reservoirs also sequester a significant portion of inflowing carbon in sediments and slow the carbon cycle by delaying the return of carbon to the atmosphere for decades to centuries. Together, these refinements would help to illuminate pathways toward meeting energy demand with the longest-possible delay in returning carbon to the atmosphere and without adding ancient sources to the pool of carbon cycling through aquatic ecosystems.

13 HYDRO ENERGY↗
DOE OSTI2025

Microbial Pathways for Cost-Effective Low-Carbon Renewable Indigoidine

Indigoidine is a bioadvantaged platform molecule with diverse applications, including use as a textile dye, biotransistor, biosolar cell, biosensor, and food coloring. There are multiple microbial hosts and carbon sources that can be used and optimized for its production, yet there is limited guidance for which options have the greatest commercial potential. Here, we consider five different host microbes and combine genome-scale metabolic models with techno-economic and lifecycle assessment models. Pseudomonas putida currently outperforms synthetic indigo production and other indigoidine-producing hosts, using glucose, xylose, and lignin-derived aromatics to produce indigoidine at a minimum selling price of $2.9/kg and a greenhouse gas (GHG) footprint of 3.5 kgCO 2e /kg. Optimizing pathways-achieving 90% of the theoretical indigoidine yield from sugars and aromatics-can reduce costs 6-7-fold and GHG emissions 3-10-fold. From a cost perspective, microbes that co-utilize aromatics are advantageous, while selecting hosts that coproduce other value-added molecules can reduce GHG emissions. System-wide improvements and the use of a low-cost, low-carbon nitrogen source are crucial for commercial viability in all cases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗