Search NASA⌕ Search

SEARCH · Search NASA

Results for “GRAPHENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The study of contact properties in edge-contacted graphene–aluminum Josephson junctions

Transparent contact interfaces in superconductor–graphene hybrid systems are critical for realizing superconducting quantum applications. Here, we examine the effect of the edge contact fabrication process on the transparency of the superconducting aluminum–graphene junction. We show significant improvement in the transparency of our superconductor–graphene junctions by promoting the chemical component of the edge contact etch process. Our results compare favorably with state-of-the-art graphene Josephson junctions. The findings of our study contribute to advancing the fabrication knowledge of edge-contacted superconductor–graphene junctions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Deterministic fabrication of graphene hexagonal boron nitride moiré superlattices

The electronic properties of moiré heterostructures depend sensitively on the relative orientation between layers of the stack. For example, near-magic-angle twisted bilayer graphene (TBG) commonly shows superconductivity, yet a TBG sample with one of the graphene layers rotationally aligned to a hexagonal Boron Nitride (hBN) cladding layer provided experimental observation of orbital ferromagnetism. To create samples with aligned graphene/hBN, researchers often align edges of exfoliated flakes that appear straight in optical micrographs. However, graphene or hBN can cleave along either zig-zag or armchair lattice directions, introducing a 30° ambiguity in the relative orientation of two flakes. By characterizing the crystal lattice orientation of exfoliated flakes prior to stacking using Raman and second-harmonic generation for graphene and hBN, respectively, we unambiguously align monolayer graphene to hBN at a near-0°, not 30°, relative twist angle. We confirm this alignment by torsional force microscopy of the graphene/hBN moiré on an open-face stack, and then by cryogenic transport measurements, after full encapsulation with a second, nonaligned hBN layer. This work demonstrates a key step toward systematically exploring the effects of the relative twist angle between dissimilar materials within moiré heterostructures.

boron nitride↗
DOE OSTI2026

A large interlaboratory electron diffraction study of monolayer graphene

Standardisation of data collection and analysis is essential to enable commercialisation of 2D materials in a wide range of technologies. Selected area electron diffraction (SAED) in the transmission electron microscope (TEM) is one of the key methods for distinguishing monolayer from bilayer and few-layer graphene by comparing the 1st and 2nd order diffraction spot intensities. Yet there are many factors that can affect the reliability of data collection and interpretation, causing the measurement of monolayer samples to deviate from the literature boundary condition of $I_{\{\bar{2}110\}}$$/$$I_{\{1\bar{1}00\}}$ < 1 for monolayer graphene (1LG). Here we present the results of a large interlaboratory SAED comparison study, where 15 international laboratories measured and analysed nominally identical samples of chemical vapour deposited graphene. Large variations were observed in the measured ratios of diffraction spot intensities, with the largest variance associated with poor quality SAED data resulting from inadequate specimen handling and storage. To inform the reliable determination of monolayer thickness from SAED patterns we provide a description of best practice for specimen handling, TEM operation, data collection and analysis. This work was undertaken within VAMAS Technical Working Area 41: Graphene and related 2D materials—Project 9, the results of which have been directly incorporated into ISO/TS 21356–2 for the characterisation of graphene sheets. We find that when this methodology is followed, 1LG can be distinguished from bilayer or thicker material with high confidence where analysis of a single SAED pattern gives $I_{\{\bar{2}110\}}$$/$$I_{\{1\bar{1}00\}}$ < 1.2, even in the absence of precise specimen tilting.

2D materials↗
DOE OSTI2022

Single-molecule magnet Mn 12 on GaAs-supported graphene: Gate field effects from first principles

In this work, we study gate field effects on the Mn 12 O 12 (COOH) 16 (H 2 O) 4 | graphene | GaAs heterostructure via first-principles calculations. We find that under moderate doping levels electrons can be added to but not taken from the single-molecule magnet Mn 12 O 12 (COOH) 16 (H 2 O) 4 (Mn 12 ). The magnetic anisotropy energy (MAE) of Mn 12 decreases as the electron doping level increases, due to electron transfer from graphene to Mn 12 and change in the band alignment between Mn 12 and graphene. At an electron doping level of -5.00×10 13 cm -2 , the MAE decreases by about 18% compared with zero doping. The band alignment between graphene and GaAs is more sensitive to electron doping than to hole doping, since the valence band of GaAs is close to the Fermi level. The GaAs substrate induces a small band gap in the supported graphene under zero gate field and a nearly strain-free configuration. Finally, we propose a vertical tunnel junction for probing the gate dependence of MAE via electron transport measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Andreev Reflection and Klein Tunneling in High-Temperature Superconductor-Graphene Junctions

Scattering processes in quantum materials emerge as resonances in electronic transport, including confined modes, Andreev states, and Yu-Shiba-Rusinov states. However, in most instances, these resonances are driven by a single scattering mechanism. Here, in this paper, we show the appearance of resonances due to the combination of two simultaneous scattering mechanisms, one from superconductivity and the other from graphene p-n junctions. These resonances stem from Andreev reflection and Klein tunneling that occur at two different interfaces of a hole-doped region of graphene formed at the boundary with superconducting graphene due to proximity effects from Bi 2 Sr 2 Ca 1 Cu 2 O 8+δ . The resonances persist with gating from p + -p and p-n configurations. The suppression of the oscillation amplitude above the bias energy which is comparable to the induced superconducting gap indicates the contribution from Andreev reflection. Our experimental measurements are supported by quantum transport calculations in such interfaces, leading to analogous resonances. Our results put forward a hybrid scattering mechanism in graphene–high-temperature superconductor heterojunctions of potential impact for graphene-based Josephson junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

X-ray free electron laser studies of electron and phonon dynamics of graphene adsorbed on copper

Here, we report optical pumping and x-ray absorption spectroscopy experiments at the Pohang Accelerator Laboratory free electron laser that probes the electron dynamics of a graphene monolayer adsorbed on copper in the femtosecond regime. By analyzing the results with ab initio theory we infer that the excitation of graphene is dominated by indirect excitation from hot electron-hole pairs created in the copper by the optical laser pulse. However, once the excitation is created in graphene, its decay follows a similar path as in many previous studies of graphene adsorbed on semiconductors, i.e., rapid excitation of strongly coupled optical phonons and eventual thermalization. It is likely that the lifetime of the hot electron-hole pairs in copper governs the lifetime of the electronic excitation of the graphene.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanisms of adsorbing hydrogen gas on metal decorated graphene

Hydrogen is a key player in global strategies to reduce greenhouse gas emissions. In order to make hydrogen a widely used fuel, we require more efficient methods of storing it than the current standard of pressurized cylinders. An alternative method is to adsorb H 2 in a material and avoid the use of high pressures. Among many potential materials, layered materials such as graphene present a practical advantage as they are lightweight. However, graphene and other 2D materials typically bind H 2 too weakly to store it at the typical operating conditions of a hydrogen fuel cell, meaning that high pressure would still be required. Modifying the material, for example by decorating graphene with adatoms, can strengthen the adsorption energy of H 2 molecules, but the underlying mechanisms are still not well understood. In this work, we systematically screen alkali and alkaline-earth metal decorated graphene sheets for the static thermodynamic adsorption of hydrogen gas from first principles and focus on the mechanisms of binding. We show that there are three mechanisms of adsorption on metal decorated graphene and each leads to distinctly different hydrogen adsorption structures. The three mechanisms can be described as weak van der Waals physisorption, metal adatom facilitated polarization, and Kubas adsorption. Among these mechanisms, we find that Kubas adsorption is easily perturbed by an external electric field, providing a way to tune H 2 adsorption. In conclusion, this work is foundational and builds our understanding of H 2 adsorption under idealized conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermodynamics and kinetics of H adsorption and intercalation for graphene on 6 H -SiC(0001) from first-principles calculations

Previous experimental observations for H intercalation under graphene on SiC surfaces motivate the clarification of configuration stabilities and kinetic processes related to intercalation. From first-principles density-functional-theory calculations, we analyze H adsorption and intercalation for graphene on a 6H-SiC(0001) surface, where the system includes two single-atom-thick graphene layers: the top-layer graphene (TLG) and the underling buffer-layer graphene (BLG) above the terminal Si layer. Our chemical potential analysis shows that in the low-H coverage regime (described by a single H atom within a sufficiently large supercell), intercalation into the gallery between TLG and BLG or into the gallery underneath BLG is more favorable thermodynamically than adsorption on top of TLG. However, intercalation into the gallery between TLG and BLG is most favorable. We obtain energy barriers of about 1.3 and 2.3 eV for a H atom diffusing on and under TLG, respectively. From an additional analysis of the energy landscape in the vicinity of a step on the TLG, we assess how readily one guest H atom on the TLG terrace can directly penetrate the TLG into the gallery between TLG and BLG versus crossing a TLG step to access the gallery. Finally, we also perform density functional theory calculations for higher H coverages revealing a shift in favorability to intercalation of H underneath BLG and characterizing the variation with H coverage in interlayer spacings.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic-Scale Simulations on Graphene Bending Near a Copper Surface

Molecular insights into graphene-catalyst surface interactions can provide useful information for the efficient design of copper current collectors with graphitic anode interfaces. As graphene bending can affect the local electron density, it should reflect its local reactivity as well. Using ReaxFF reactive molecular simulations, we have investigated the possible bending of graphene in vacuum and near copper surfaces. We describe the energy cost for graphene bending and the binding energy with hydrogen and copper with two different ReaxFF parameter sets, demonstrating the relevance of using the more recently developed ReaxFF parameter sets for graphene properties. Moreover, the draping angle at copper step edges obtained from our atomistic simulations is in good agreement with the draping angle determined from experimental measurements, thus validating the ReaxFF results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Combinatorial Cu-Ni Alloy Thin-Film Catalysts for Layer Number Control in Chemical Vapor-Deposited Graphene

We synthesized a combinatorial library of CuxNi1−x alloy thin films via co-sputtering from Cu and Ni targets to catalyze graphene chemical vapor deposition. The alloy morphology, composition, and microstructure were characterized via scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), and X-ray diffraction (XRD), respectively. Subsequently, the CuxNi1−x alloy thin films were used to grow graphene in a CH4-Ar-H2 ambient at atmospheric pressure. The underlying rationale is to adjust the CuxNi1−x composition to control the graphene. Energy dispersive x-ray spectroscopy (EDS) analysis revealed that a continuous gradient of CuxNi1−x (25 at. % < x < 83 at.%) was initially achieved across the 100 mm diameter substrate (~0.9%/mm composition gradient). The XRD spectra confirmed a solid solution was realized and the face-centered cubic lattice parameter varied from ~3.52 to 3.58 A˙, consistent with the measured composition gradient, assuming Vegard’s law. Optical microscopy and Raman analysis of the graphene layers suggest single layer growth occurs with x > 69 at.%, bilayer growth dominates from 48 at.% < x < 69 at.%, and multilayer (≥3) growth occurs for x < 48 at.%, where x is the Cu concentration. Finally, a large area of bi-layer graphene was grown via a CuxNi1−x catalyst with optimized catalyst composition and growth temperature.

2D materials↗
DOE OSTI2020

Flash Graphene Morphologies

Flash Joule heating (FJH) can convert almost any carbon-based precursor into bulk quantities of graphene. This work explores the morphologies and properties of flash graphene (FG) generated from carbon black. It is shown that FG is partially comprised of sheets of turbostratic FG (tFG) that have a rotational mismatch between neighboring layers. The remainder of the FG is wrinkled graphene sheets that resemble non-graphitizing carbon. To generate high quality tFG sheets, a FJH duration of 30 – 100 ms is employed. Beyond 100 ms, the turbostratic sheets have time to AB-stack and form bulk graphite. Atomistic simulations reveal that generic thermal annealing yields predominantly wrinkled graphene which displays minimal to no alignment of graphitic planes, as opposed to the high-quality tFG that might be formed under the direct influence of current conducted through the material. As a result, the tFG was easily exfoliated via shear, hence the FJH process has the potential for bulk production of tFG without the need for pre-exfoliation using chemicals or high energy mechanical shear.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Thermodynamic Stability and Site‐Specific Distribution of Graphitic and Pyridinic Nitrogen in Graphene Moiré on Ru(0001)

Abstract Graphene‐like materials are of interest for large‐scale hydrogen storage applications due to their lightweight, durable, and scalable properties. Nitrogen‐doping minimizes kinetic limitations in diffusion and recombination on surfaces, however, the role of graphitic nitrogen (GN) and pyridinic nitrogen (PN) is not well understood. Nitrogen‐doped graphene is synthesized on Ru(0001) using chemical vapor deposition (CVD) of pyridine and ion irradiation. Scanning tunneling microscopy (STM), x‐ray photoelectron spectroscopy (XPS), and density functional theory (DFT) are used to identify the structure, location, and thermodynamic stability of nitrogen species within the graphene moiré. CVD of pyridine results in a low nitrogen concentration (<0.1at%), while the post‐growth nitrogen ion irradiation allows us to increase the concentration further. The concentration of GN and PN is controlled by varying the ion dose and annealing temperature. Comparison of measured and simulated STM images of GN and PN yield an excellent agreement, allowing us to confidently establish that GN is preferentially located near the center of the Atop region, while PN is located in the valley region of the graphene moiré. This report explicitly confirms the site assignments and provides a foundation for the site synthesis and analysis of structural and electronic properties that drive the reactivity of N‐doped graphene.

Gedara, Buddhika S. A. [Physical and Computational↗
DOE OSTI2024

Sustainable Production of Biomass‐Derived Graphite and Graphene Conductive Inks from Biochar

Abstract Graphite is a commonly used raw material across many industries and the demand for high‐quality graphite has been increasing in recent years, especially as a primary component for lithium‐ion batteries. However, graphite production is currently limited by production shortages, uneven geographical distribution, and significant environmental impacts incurred from conventional processing. Here, an efficient method of synthesizing biomass‐derived graphite from biochar is presented as a sustainable alternative to natural and synthetic graphite. The resulting bio‐graphite equals or exceeds quantitative quality metrics of spheroidized natural graphite, achieving a RamanI D /I G ratio of 0.051 and crystallite size parallel to the graphene layers (L a ) of 2.08 µm. This bio‐graphite is directly applied as a raw input to liquid‐phase exfoliation of graphene for the scalable production of conductive inks. The spin‐coated films from the bio‐graphene ink exhibit the highest conductivity among all biomass‐derived graphene or carbon materials, reaching 3.58 ± 0.16 × 10 4 S m −1 . Life cycle assessment demonstrates that this bio‐graphite requires less fossil fuel and produces reduced greenhouse gas emissions compared to incumbent methods for natural, synthesized, and other bio‐derived graphitic materials. This work thus offers a sustainable, locally adaptable solution for producing state‐of‐the‐art graphite that is suitable for bio‐graphene and other high‐value products.

Chemistry↗
DOE OSTI2023

Structural Stability of Graphene-Supported Pt Layers: Diffusion Monte Carlo and Density Functional Theory Calculations

In this study, we used a combination of diffusion Monte Carlo and density functional theory calculations to investigate the stability and interlayer binding of various layered structures of Pt atoms adsorbed on graphene. Our findings show that vertically buckled Pt monolayer and bilayer with (111)-packing order are more energetically favorable than the corresponding buckled (100) or flat (100)-packing structures. This can be attributed to the significant lattice mismatch (>10%) between pristine graphene and a free-standing (100)-packing Pt layer. Additionally, our calculations reveal that among the (100)-packing Pt layers, an incommensurate structure with a Pt/C atomic ratio less than 1/2 may be more stable than the commensurate structures registered at the bridge sites, which aligns with recent experimental findings of incommensurate (100)-packing Pt layers on graphene. The interlayer binding between the Pt layer and graphene is found to be primarily driven by van der Waals interaction, except for the AA-stacked buckled-(100) Pt bilayer where the bottom Pt atoms show chemisorption to the graphene surface. In conclusion, this research offers a comprehensive examination of the stability and interlayer binding of metallic Pt layers, providing valuable insights for potential applications as a next-generation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insights into the Interaction of Redox Active Organic Molecules and Solvents with the Pristine and Defective Graphene Surfaces from Density Functional Theory

A systematic study is reported on the interaction of two representative redox active organic molecules and two solvent molecules with pristine and defective graphene surfaces as a model of an electrode surface of a redox flow battery (RFB). The redox active molecules include a catholyte, 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB), and an anolyte molecule, benzothiadiazole (BTZ), and the solvent molecules include acetonitrile (MeCN) and ethylene carbonate (EC). The graphene defects investigated include a single vacancy, double vacancy, zigzag step edge, and armchair step edge. Computations suggest that the interactions of all molecules with a pristine graphene surface are relatively weak (0.2 to 0.8 eV) and dominated by van der Waals effects; therefore, these molecules are chemically stable upon interacting with pristine nondefective graphene. The BTZ, DDB, MeCN, and EC molecules interact strongly (1.5 to 5.5 eV) with the single vacancy and zigzag step edges of graphene that leads to the possible decomposition of the molecules with strength of interaction in the order of MeCN > BTZ > DDB > EC and MeCN > EC > BTZ > DDB, respectively. Calculations show that the BTZ, DDB, MeCN, and EC molecules interact less strongly (0.2 to 1.4 eV) to the double vacancy and armchair step edge than to the single vacancy and zigzag step edge. The binding energies of the molecules were significantly reduced when interacting with the passivated defects, suggesting that the passivation of the defects could help prevent unwanted chemical interactions between the neutral molecules and the electrode surface. In all organic RFBs, one of the crucial bottlenecks is the stability of the constituent molecules with the electrode material, and this study provides insights into the chemical interaction of selected candidate species with a model carbon electrode.

Howard, Jason D.↗
DOE OSTI2020

Pore-Edge Tailoring of Single-Atom Iron–Nitrogen Sites on Graphene for Enhanced CO 2 Reduction

Hosting atomically dispersed nitrogen-coordinated iron sites (Fe-N 4 ) on graphene offers unique opportunities for driving electrochemical CO 2 reduction reaction (CO 2 RR) to CO. However, the strong adsorption of *CO on the Fe-N 4 site embedded in intact graphene limits current density due to slow CO desorption process. Herein, we report how the manipulation of pore edges on graphene alters the local electronic structure of isolated Fe-N 4 sites and improves their intrinsic reactivity for prompting CO generation. We demonstrate that constructing holes on graphene basal plane to support Fe-N 4 can significantly enhance its CO 2 RR compared to the pore-deficient graphene-supported counterpart, exhibiting a CO Faradaic efficiency of 94% and a turnover frequency of 1630 h -1 at 0.58 V vs RHE. Mechanistic studies reveal that the incorporation of pore edges results in the downshifting of the d-band center of Fe sites, which weakens the strength of the Fe-C bond when the *CO intermediate adsorbs on edge-hosted Fe-N 4 , thus boosting the CO desorption and evolution rates. These findings suggest that engineering local support structure renders a way to design high-performance single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spatiotemporal Observation of Quasi-Ballistic Transport of Electrons in Graphene

We report spatiotemporal observations of room-temperature quasi-ballistic electron transport in graphene, which is achieved by utilizing a four-layer van der Waals heterostructure to generate free charge carriers. The heterostructure is formed by sandwiching a MoS 2 and MoSe 2 heterobilayer between two graphene monolayers. Transient absorption measurements reveal that the electrons and holes separated by the type-II interface between MoS 2 and MoSe 2 can transfer to the two graphene layers, respectively. Transient absorption microscopy measurements, with high spatial and temporal resolution, reveal that while the holes in one graphene layer undergo a classical diffusion process with a large diffusion coefficient of 65 cm 2 s –1 and a charge mobility of 5000 cm 2 V –1 s –1 , the electrons in the other graphene layer exhibit a quasi-ballistic transport feature, with a ballistic transport time of 20 ps and a speed of 22 km s –1 , respectively. The different in-plane transport properties confirm that electrons and holes move independently of each other as charge carriers. Furthermore, the optical generation of ballistic charge carriers suggests potential applications for such van der Waals heterostructures as optoelectronic materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Strain-Based Chemiresistive Polymer-Coated Graphene Vapor Sensors

Suspended chemiresistive graphene sensors have been fabricated using well-established nanofabrication techniques to generate sensors that are highly sensitive to pyridine and with excellent discrimination between polar and nonpolar analytes. When coated with a polymer surface layer and suspended on 3-D patterned glass electrodes, a hybrid combination of polymer and graphene yields chemiresistive vapor sensors. Expansion and contraction of the polymer layer produces strain on the suspended graphene (Gr). Hence, when organic vapors permeate into the polymer layer, the high gauge factor of the graphene induces substantial electrical resistive changes as folds and creases are induced in the graphene. The hybrid suspended polymer/Gr sensor exhibits substantial responses to polar organic vapors, especially pyridine, while also exhibiting reversibility and increased discrimination between polar and nonpolar analytes compared to previous approaches. This sensor design also allows for potential tunability in the types of polymers used for the reactive surface layer, allowing for use in a variety of potential applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗