Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heating experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Determination of the SSME high pressure oxidizer turbopump bearing temperature

The SSME high pressure liquid oxygen turbopump (HPOTP) bearings sometimes wear and experience heating and oxidation of the ball and raceway surfaces. So far it has been impossible to measure the temperature of the bearings directly during operation of the turbopumps. However, a method was developed for determining the surface temperature of the bearings from the composition of the oxides using oxidation samples for calibration and Auger Electron Spectroscopy (AES) for chemical analysis.

Naerheim, Y.↗
NASA NTRS1990

A theoretical model for the temporal evolution of HF-enhanced plasma lines

The HF-enhanced plasma lines (HFPLs) observed in the Arecibo heating experiments refer to the radar returns at frequencies near the sum and difference of the radar frequency and the HF-heatear frequency. Those enhanced spectral lines are caused by backscatter of radar signals from parametrically excited plasma waves having a wavenumber of 18 n. A nonlinear theory was developed to describe the temporal evolution of those specified plasma waves and their originating altitude interval of HFPLs observed at Arecibo, Puerto Rico are explained. The theoretical resultsagree well with the observation (Djuth and Sulzer, 1989).

Kuo, S. P.↗
NASA NTRS1991

K/T age for the popigai impact event

The multi-ringed POPIGAI structure, with an outer ring diameter of over 100 km, is the largest impact feature currently recognized on Earth with an Phanerozoic age. The target rocks in this relatively unglaciated region consist of upper Proterozoic through Mesozoic platform sediments and igneous rocks overlying Precambrian crystalline basement. The reported absolute age of the Popigai impact event ranges from 30.5 to 39 Ma. With the intent of refining this age estimate, a melt-breccia (suevite) sample from the inner regions of the Popigai structure was prepared for total fusion and step-wise heating Ar-40/Ar-39 analysis. Although the total fusion and step-heating experiments suggest some degree of age heterogeneity, the recurring theme is an age of around 64 to 66 Ma.

Deino, A. L.↗
NASA NTRS1993

Tambo Quemado: Extraordinary concentrations of REE and refractory trace elements caused by artificial heating

Buchwald examined samples of the IIIB iron Tambo Quemado (TAMQ) cut from the 130 kg main mass. He determined it had been artificially heated, at some time prior to being reported, in an attempt to obtain metal from it. Although the Widmanstatten structure appears relatively unaffected under macroscopic examination, microscopic study of etched sections reveals the effect of the heating. Taenite and plessite area boundaries are indistinct due to high temperature diffusion. Schreibersite, once present in significant amounts, has been melted. Schreibersites in the interior have resolidified in fine-grained eutectic textures surrounded by dark-etching metal rims supersaturated with phosphorus. Buchwald states that phosphate minerals were probably present originally, because graftonite, and its polymorph sarcopside (both essentially Fe3(PO4)2), are common in irons of the IIIB groups. Based on his metallographic study Buchwald estimates TAMQ was heated to 1000 C for about one hour. An interior sample from TAMQ was examined in order to determine what effect this unintended heating 'experiment' had upon the phosphate phases.

Olsen, E.↗
NASA NTRS1997

Lepidocrocite to Maghemite to Hematite: A way to have Magnetic and Hematitic Martian Soil

We examined decomposition products of lepidocrocite, which were produced by heating the phase in air at temperatures up to 525 C for 3 and 300 hr, by XRD, TEM, magnetic methods, and reflectance spectroscopy (visible and near-IR). Single-crystal lepidocrocite particles dehydroxilated to polycrystalline particles of disordered maghemite which subsequently transformed to polycrystalline particles of hematite. Essentially pure maghemite was obtained at 265 and 223 C for the 3 and 300 hr heating experiments, respectively. Its saturation magnetization (J(sub s)) and mass specific susceptibility are approximately 50 A(sq m)/kg and approximately 40 cubic micrometers/kg, respectively. Because hematite is spectrally dominant, spectrally-hematitic samples (i.e., characterized bv a minimum near 860 nm and a maximum near 750 nm) could also be strongly magnetic (J(sub s) up to approximately 30 A(sq m)/kg) from the masked maghemite component. TEM analyses showed that individual particles are polycrystalline with respect to both maghemite and hematite. The spectrally-hematitic and magnetic Mh+Hm particles can satisfy the spectral and magnetic constraints for Martian surface materials over a wide range of values of Mh/(Mh+Hm) and as either pure oxide powders or (within limits) as components of multiphase particles. These experiments are consistent with lepidocrocite as the precursor of Mh+Hm assemblages on Mars, but other phases (e.g., magnetite) that decompose to Mh and Hm are also possible precursors. Simulations done with a copy of the Mars Pathfinder Magnet Array showed that spectrally hematitic Mh+Hm powders having J(sub s) equal to 20.6 A(sq m)/kg adhered to all five magnets.

Morris, Richard V.↗
NASA NTRS2001

Evolution of the Earth and Origin of Life: The Role of Gas/Fluid Interactions with Rocks

The work under the Cooperative Agreement will be centered on questions of the evolution of Life on the early Earth and possibly on Mars. It is still hotly debated whether the essential organic molecules were delivered to the early Earth from space (by comets, meteorites or interplanetary dust particles) or were generated in situ on Earth. Prior work that has shown that the matrix of igneous minerals is a medium in which progenitors of organic molecules assemble from H2O, C02 and N2 incorporated as minority "impurities" in minerals of igneous rocks during crystallization from H2O/CO2/N2-laden magmas. The underlying processes involve a redox. conversion whereby C, H, and N become chemically reduced, while 0 becomes oxidized to the peroxy state. During Year 02 the work will be divided into three tasks. Task 1: After carboxylic (fatty) acids and N-bearing compounds have been identified, other extractable organic molecules including lipids, oily substances and amino acids will be studied. Dedicated lipid analysis will be combined with gas chromatographic-mass spectroscopic (GCMS) analysis of organic compounds extracted from minerals and rocks. Task 2: Using infrared (IR) spectroscopy, C-H entities that are indicators for the organic progenitors in mineral matrices will be studied. A preliminary heating experiment with MgO single crystals has shown that the C-H entities can be pyrolyzed, causing the IR bands to disappear, but at room temperature the IR bands reappear in a matter of days to weeks. This work will be expanded, both by studying synthetic MgO crystals and olivine crystals from the Earth's upper mantle. The C-H bands will be compared to the published "organic" IR feature of dust in the interstellar medium (ISM) and interplanetary dust particles (IDP). Task 3: A paradox marks the evolution of early Life: Oxygen is highly toxic to primitive life, yet early organisms "learned" to detoxify reactive oxygen species, to utilize oxygen, and even produce it. Why would organisms on the early anaerobic Earth be under evolutionary pressure to evolve defenses against reactive oxygen species? Minerals in igneous rocks are now known to contain peroxy. When such minerals weather, the peroxy hydrolyzes to H2O2. The hypothesis will be tested whether organisms living in intimate contact with rock surfaces are subjected to a constant trickle of H202 and thus under stress to develop strategies to either detoxify the reactive oxygen species or repair the molecular damage that they cause. Understanding these processes is central to the Astrobiology mission. It opens new avenues toward understanding the evolution of early life on Earth, and the potential for aerobic life elsewhere. This Cooperative Agreement also has a strong educational and public outreach component involving high school, undergraduate students, and high school teachers.

Freund, Friedemann↗
NASA NTRS1995

On the Abundances of Moderately Volatile Elements in Meteorites

The abundances of the moderately volatile elements (those which condense or evaporate in the temperature range 650-1350 K) in chondritic meteorites deviate from solar (or 'cosmic', as defined by CI meteorite composition) in a manner that strongly suggests that they were determined primarily by volatility, independent of chemical affinity. Wasson and collaborators have long argued that the observed correlation of relative abundance with condensation temperature reflects a systematically selective process which favored the accretion of refractory material over volatile material from a nebula cooling from a hot initial state. This view is supported by the detailed examination of chondrules and matrix in carbonaceous meteorites and the contrast between meteorite trace element abundance patterns with those produced in heating experiments. However, the idea that the moderately volatile abundances reflect global condensation has not previously been quantitatively tested or used as a constraint on nebula evolution. We have therefore constructed models of the solar nebula designed specifically for addressing meteoritic data. Calculations so far indicate that the abundance patterns of the moderately volatile elements in chondritic meteorites can be produced naturally in an evolving nebula that cools with the reduction in opacity associated with the accumulation of meteoritic bodies. Additional information is contained in the original extended abstract.

Cassen, Pat↗
NASA NTRS2003

In Situ Heating Behavior by Infrared Microspectroscopy of Organic Components in Tagish Lake Meteorite

The Tagish Lake meteorite is a new type of water- and carbon-rich carbonaceous chondrite. Its total carbon content is approx. 5 wt% and the organic carbon content reaches approx.1.3 wt%. We reported from the Tagish Lake sample#TL3B6 the first in situ observation of the hollow organic globules. TL3B6 is generally enriched in the organic globules that consist of aliphatic and oxygenated functionality similar to the material produced by the laboratory simulation of UV photolysis of interstellar ice analogs suggesting that the organic globules in Tagish Lake may be extremely primitive organic material that formed before or during the formation of the solar system. Here we report the micro-sampling FTIR analysis of the TL3B6 and the in situ step heating experiments: which can allow us to place 1) significant constraints on the organic functionality in Tagish Lake; 2) the thermal stability of the organics; and 3) thermal history of the meteorite and its parent body. For comparison, the membranous films formed from hydrothermal reaction of an OH-bearing amino acid (theronine: Thr) and silica mixture were examined.

Nakamura, K.↗
NASA NTRS2006

Aerocapture Technology Development for Planetary Science - Update

Within NASA's Science Mission Directorate is a technological program dedicated to improving the cost, mass, and trip time of future scientific missions throughout the Solar System. The In-Space Propulsion Technology (ISPT) Program, established in 2001, is charged with advancing propulsion systems used in space from Technology Readiness Level (TRL) 3 to TRL6, and with planning activities leading to flight readiness. The program's content has changed considerably since inception, as the program has refocused its priorities. One of the technologies that has remained in the ISPT portfolio through these changes is Aerocapture. Aerocapture is the use of a planetary body's atmosphere to slow a vehicle from hyperbolic velocity to a low-energy orbit suitable for science. Prospective use of this technology has repeatedly shown huge mass savings for missions of interest in planetary exploration, at Titan, Neptune, Venus, and Mars. With launch vehicle costs rising, these savings could be the key to mission viability. This paper provides an update on the current state of the Aerocapture technology development effort, summarizes some recent key findings, and highlights hardware developments that are ready for application to Aerocapture vehicles and entry probes alike. Description of Investments: The Aerocapture technology area within the ISPT program has utilized the expertise around NASA to perform Phase A-level studies of future missions, to identify technology gaps that need to be filled to achieve flight readiness. A 2002 study of the Titan Explorer mission concept showed that the combination of Aerocapture and a Solar Electric Propulsion system could deliver a lander and orbiter to Titan in half the time and on a smaller, less expensive launch vehicle, compared to a mission using chemical propulsion for the interplanetary injection and orbit insertion. The study also identified no component technology breakthroughs necessary to implement Aerocapture on such a mission. Similar studies of Aerocapture applications at Neptune, Venus, and Mars were studied in 2003 through 2005. All showed significant performance improvements for the missions studied. Findings from these studies were used to guide the technology development tasks originally solicited in a 2002 NASA ROSS Research Announcement. The tasks are now in their final year and have provided numerous improvements in modeling and hardware, for use in proposals or new mission starts. Major Accomplishments: Since validation of the Aerocapture maneuver requires a space flight, ground developments have focused on modeling and environment prediction, materials, and sensors. Lockheed Martin has designed and built a 2-meter Carbon-Carbon aeroshell "hot structure." The article utilizes co-cured stiffening ribs and advanced insulation to achieve large scale, and up to a 40% reduction in areal density over the Genesis probe construction. This concept would be an efficient solution for probes that experience heat rates near 800-1000 W/cm(exp 2), such as at Venus and Earth. Applied Research Associates has extensively tested a family of efficient ablative TPS materials that provide solutions for a range of heating conditions. These materials are being applied to high-temperature structures built by ATK Space Systems, led by Langley Research Center. One-meter aeroshells will be thermally tested to validate construction and demonstrate higher bondline temperatures, which can lead to mass savings of up to 30% over traditional heatshields. Ames Research Center has developed aeroshell instrumentation that could measure environmental conditions and material performance during atmospheric entry. Instruments to measure TPS recession, heat flux, and catalycity could be combined with traditional sensors to provide a "plug-and-play" system for minimal mass and power, that would acquire flight data for model improvement and risk reduction on future missions. Improved atmospheric and aerothermodynamic models ha also been a major focus of the program. Next Steps: Aerocapture is one of five technologies in competition for a flight validation opportunity through the New Millennium Program. If selected, a fully autonomous vehicle will perform an Aerocapture at Earth in 2010, and flight data will be used to validate the guidance system and the TPS material for science mission infusion.

Munk, Michelle M.↗
NASA NTRS2007

In-situ micro-FTIR Study of Thermal Changes of Organics in Tagish Lake Meteorite: Behavior of Aliphatic Oxygenated Functions and Effects of Minerals

Systematic in-situ FTIR heating experiments of Tagish Lake meteorite grains have been performed in order to study thermal stability of chondritic organics. Some aliphatic model organic substances have also been used to elucidate effects of hydrous phyllosilicate minerals on the thermal stability of organics. The experimental results indicated that organic matter in the Tagish Lake meteorite might contain oxygenated aliphatic hydrocarbons which are thermally stable carbonyls such as ester and/or C=O in ring compounds. The presence of hydrous phyllosilicate minerals has a pronounced effect on the increase of the thermal stability of aliphatic and oxygenated functions. These oxygenated aliphatic organics in Tagish Lake can be formed during the aqueous alteration in the parent body and the formation temperature condition might be less than 200 C, based especially on the thermal stability of C-O components. The hydrous phyllosilicates might provide sites for organic globule formation and protected some organic decomposition

Kebukawa, Yoko↗
NASA NTRS2020

Physical Simulation Of Rocket Exhaust Aerodynamics Using Heated Ethane: Prototypical Experiments

An inaugural experimental investigation into the use of heated ethane as a motive fluid for subscale simulation of rocket exhaust plume aerodynamics has been conducted. A small, self-contained, hydrocarbon aerodynamics test stand was designed and fabricated for this purpose. Testing was performed on an aerodynamic system comprised of a 77:1 upper stage nozzle contour coupled with a passive second-throat supersonic diffuser, specifically selected for its known LOX/GH2 hot-fire performance and complex shock structure. Effects of ethane purity and stagnation temperature on the accuracy of flow field replication have been examined. All major flow features present in hot-fire tests were reproduced in heated ethane with start and unstart pressure ratio errors of approximately +4% and -5%, respectively. Steady-state test cell pressure ratio errors of ±0.5% were shown to be readily achievable when the stagnation temperature was well-controlled. Ambient-temperature nitrogen testing was also conducted for the purpose of direct comparison of the ethane method to conventional cold-flow techniques. However, its higher isentropic exponent prevented the diffuser from achieving start.

rocket↗
NASA NTRS1976

Test program for transmitter experiment package and heat pipe system for the communications technology satellite

The test program is described for the 200 watt transmitter experiment package and the variable conductance heat pipe system which are components of the high-power transponder aboard the Communications Technology Satellite. The program includes qualification tests to demonstrate design adequacy, acceptance tests to expose latent defects in flight hardware, and development tests to integrate the components into the transponder system and to demonstrate compatibility.

Depauw, J. F.↗
NASA NTRS1978

Conceptual design for spacelab pool boiling experiment

A pool boiling heat transfer experiment to be incorporated with a larger two-phase flow experiment on Spacelab was designed to confirm (or alter) the results of earth-normal gravity experiments which indicate that the hydrodynamic peak and minimum pool boiling heat fluxes vanish at very low gravity. Twelve small sealed test cells containing water, methanol or Freon 113 and cylindrical heaters of various sizes are to be built. Each cell will be subjected to one or more 45 sec tests in which the surface heat flux on the heaters is increased linearly until the surface temperature reaches a limiting value of 500 C. The entire boiling process will be photographed in slow-motion. Boiling curves will be constructed from thermocouple and electric input data, for comparison with the motion picture records. The conduct of the experiment will require no more than a few hours of operator time.

Lienhard, J. H.↗
NASA NTRS1973

Apollo 17 heat flow and convection experiments: Final data analyses results

A group of experiments called the Apollo 17 heat flow and convection (HFC) experiments was conducted, aboard the Apollo 17 spacecraft while in translunar coast on the way to the moon. These experiments together with the HFC experiments flown on Apollo 14 demonstrated and provided data on two types of low-g natural convection: cellular, surface tension-driven convection and convection in confined fluids caused by spacecraft and astronaut movements. Observed convection onset times show that surface tension-driven convection occurs at lower temperature gradients in low-g than in one-g environments. Data on heat flow in confined fluids show that spacecraft and astronaut movements can cause significant degrees of convection.

Bannister, T. C.↗
NASA NTRSDate not supplied

Modeling of Cryogenic Heated-Tube Flow Boiling Experiments of Hydrogen and Helium With GFSSP

Accurate modeling of cryogenic boiling heat transfer is vital for the development of extended-duration space missions. Such missions may require the transfer of cryogenic propellants from in-space storage depots or the cooling of nuclear reactors. Purdue University in collaboration with NASA has assembled a database of cryogenic flow boiling data points from heated-tube experiments dating back to 1959, which has been used to develop new flow boiling correlations specifically for cryogens. Computational models of several of these experiments have been constructed in the Generalized Fluid System Simulation Program (GFSSP), a network flow code developed at NASA’s Marshall Space Flight Center. The new Purdue-developed correlations cover the full boiling curve: onset of nucleate boiling, nucleate boiling, critical heat flux, and film boiling. These correlations have been coded into GFSSP user subroutines. The fluids modeled are hydrogen and helium. Predictions of wall temperature, heat transfer coefficient, and pressure drop are presented and compared to the test data.

multi-phase flow↗
NASA NTRS1993

Hypersonic engine component experiments in high heat flux, supersonic flow environment

A major concern in advancing the state-of-the-art technologies for hypersonic vehicles is the development of an aeropropulsion system capable of withstanding the sustained high thermal loads expected during hypersonic flight. Even though progress has been made in the computational understanding of fluid dynamics and the physics/chemistry of high speed flight, there is also a need for experimental facilities capable of providing a high heat flux environment for testing component concepts and verifying/calibrating these analyses. A hydrogen/oxygen rocket engine heat source was developed at the NASA Lewis Research Center as one element in a series of facilities at national laboratories designed to fulfill this need. This 'Hot Gas Facility' is capable of providing heat fluxes up to 450 w/sq cm on flat surfaces and up to 5,000 w/sq cm at the leading edge stagnation point of a strut in a supersonic flow stream. Gas temperatures up to 3050 K can also be attained. Two recent experimental programs conducted in this facility are discussed. The objective of the first experiment is to evaluate the erosion and oxidation characteristics of a coating on a cowl leading edge (or strut leading edge) in a supersonic, high heat flux environment. Macrophotographic data from a coated leading edge model show progressive degradation over several thermal cycles at aerothermal conditions representative of high Mach number flight. The objective of the second experiment is to assess the capability of cooling a porous surface exposed to a high temperature, high velocity flow environment and to provide a heat transfer data base for a design procedure. Experimental results from transpiration cooled surfaces in a supersonic flow environment are presented.

Gladden, Herbert J.↗