SEARCH · Search NASA

Results for “Heterogeneous interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Corrosion of 316 L stainless steel under the natural circulation of molten NaCl-MgCl 2 salt

The corrosion behavior of 316 L stainless steel (SS) was studied via the natural circulation of molten eutectic NaCl-MgCl 2 salt through a microloop. The post-corrosion tested 316 L SS microloop sections were characterized with microscopy techniques to determine the microstructural and microchemical changes that occurred at the alloy/salt interface. It was found that 316 L SS showed heterogeneous dissolution at the hot-leg, whereas deposition of corrosion products occurred at the cold-leg. For the first time, experimentally obtained molten salt flow-induced corrosion of 316 L SS results were combined with computational thermodynamic-kinetic models to validate the dissolution and deposition in terms of elemental compositional changes at the alloy/salt interface. The thermodynamic-kinetic modeling predicted that the heterogeneous dissolution of Cr and Fe from the hot-leg section of 316 L SS persisted throughout the salt circulation. The model also estimated that, despite Cr deposition starting earlier than Fe, the total redeposition of Fe is expected to be significantly greater than that of Cr over the circulation of salt. Furthermore, the modeling accurately predicted the subsurface enrichment of Mo which is attributed to the reduced Cr activity and the relatively higher diffusion rate of Mo within the alloy matrix. Here, the agreement between modeling and experimental results confirms that Fe chlorides dissolve at the hot-leg and subsequently deposit at the cold-leg due to activity changes driven by the thermal gradient. By contrast, Cr was not detected in the cold-leg deposits, which is attributed to its weaker temperature dependence on activity, limiting its redeposition under these conditions.

36 - MATERIALS SCIENCE↗

NASA NTRS1996

Optimization of Residual Stresses in MMC's through Process Parameter Control and the use of Heterogeneous Compensating/Compliant Interfacial Layers. OPTCOMP2 User's Guide

A user's guide for the computer program OPTCOMP2 is presented in this report. This program provides a capability to optimize the fabrication or service-induced residual stresses in unidirectional metal matrix composites subjected to combined thermomechanical axisymmetric loading by altering the processing history, as well as through the microstructural design of interfacial fiber coatings. The user specifies the initial architecture of the composite and the load history, with the constituent materials being elastic, plastic, viscoplastic, or as defined by the 'user-defined' constitutive model, in addition to the objective function and constraints, through a user-friendly data input interface. The optimization procedure is based on an efficient solution methodology for the inelastic response of a fiber/interface layer(s)/matrix concentric cylinder model where the interface layers can be either homogeneous or heterogeneous. The response of heterogeneous layers is modeled using Aboudi's three-dimensional method of cells micromechanics model. The commercial optimization package DOT is used for the nonlinear optimization problem. The solution methodology for the arbitrarily layered cylinder is based on the local-global stiffness matrix formulation and Mendelson's iterative technique of successive elastic solutions developed for elastoplastic boundary-value problems. The optimization algorithm employed in DOT is based on the method of feasible directions.

Pindera, Marek-Jerzy↗

DOE OSTI2021

Seismic waves in medium with poroelastic/elastic interfaces: a two-dimensional P-SV finite-difference modelling

SUMMARY We present a new methodology of the finite-difference (FD) modelling of seismic wave propagation in a strongly heterogeneous medium composed of poroelastic (P) and (strictly) elastic (E) parts. The medium can include P/P, P/E and E/E material interfaces of arbitrary shapes. The poroelastic part can be with (i) zero resistive friction, (ii) non-zero constant resistive friction or (iii) JKD model of the frequency-dependent permeability and resistive friction. Our FD scheme is capable of subcell resolution: a material interface can have an arbitrary position in the spatial grid. The scheme keeps computational efficiency of the scheme for a smoothly and weakly heterogeneous medium (medium without material interfaces). Numerical tests against independent analytical, semi-analytical and spectral-element methods prove the efficiency and accuracy of our FD modelling. In numerical examples, we indicate effect of the P/E interfaces for the poroelastic medium with a constant resistive friction and medium with the JKD model of the frequency-dependent permeability and resistive friction. We address the 2-D P-SV problem. The approach can be readily extended to the 3-D problem.

58 GEOSCIENCES↗

DOE OSTI2026

Ionic Liquid-Enhanced Interfaces to Boost Reactive C O2 Capture

The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas–liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO 2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion–ion and ion–solvent interactions and to examine the chemical composition at the gas–liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM] + ) and 1-butyl-3-methylimidazolium ([BMIM] + ), while the impact of anions is examined using additives based on dicyanamide [DCA] − , triflate [TfO] − , bistriflimide [NTf 2 ] − , and hexafluorophosphate [PF 6 ] − anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO 2 solubility, surface tension, and the localization of CO 2 around the [OH] − ions at the gas–liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH] − are critical intermediate steps toward reactive CO 2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO 2 capture performance. Experiments reaffirmed the impact of IL additives on CO 2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

IRIS Reimagined: Advancements in Intelligent Runtime System for Task-Based Programming

Task-based programming models are gaining traction in scientific computing. IRIS is a portable runtime system that exploits multiple heterogeneous programming systems and can discover available resources and manage multiple diverse programming systems (e.g., CUDA, Hexagon, HIP, Level Zero, OpenCL, and OpenMP) simultaneously. It accounts for the constraints of task dependencies and provides customizable scheduling policies to map those tasks to heterogeneous devices. In this paper, we present new capabilities added to IRIS to improve its portability for heterogeneous programming, build-friendliness, and performance efficiency. The new additions include vendor-specific kernel support, a runtime system with a foreign function interface to eliminate writing wrapper or boilerplate code for heterogeneous kernels, an easy-to-use and configurable CMake-based build environment, automatic and efficient data transfers and orchestration, and the Hunter and DAGGER toolchains to evaluate IRIS’s task scheduling algorithms.

Miniskar, Narasinga Rao↗

DOE OSTI2024

Image-based modeling of coupled electro-chemo-mechanical behavior of Li-ion battery cathode using an interface-modified reproducing kernel particle method

Abstract An interface-modified reproducing kernel particle method (IM-RKPM) is introduced in this work to allow for a direct model construction from image pixels of heterogeneous polycrystalline Li-ion battery microstructures. The interface-modified reproducing kernel (IM-RK) approximation is constructed through scaling of a kernel function by a regularized distance function in conjunction with strategic placement of interface node locations. This leads to RK shape functions with either weak or strong discontinuities across material interfaces, suitable for modeling various interface mechanics. With the placement of a triple junction node and distance-based scaling of kernel functions, the resulting IM-RK shape function also possesses proper discontinuities at the triple junctions. This IM-RK approximation effectively remedies the well-known Gibb’s oscillation in the smooth approximation of discontinuities. Different from the conventional meshfree approaches for interface discontinuities, this IM-RK approach is done without additional degrees of freedom associated with the enrichment functions, and it is formulated with the standard procedures in the RK shape function construction. This work focuses on identifying the accuracy and convergence properties of IM-RKPM for modeling the coupled electro-chemo-mechanical system. A linear patch test is formulated and numerically tested for the electro-chemo-mechanical coupled problem with a Butler–Volmer boundary condition representing the physical conditions in Li-ion battery microstructures. This is followed by verification of the optimal rates of convergence of IM-RKPM for solving the coupled problem with higher order solutions. The image-based modeling of Li-ion battery microstructures in the numerical examples demonstrates the applicability of the proposed method to realistic Li-ion battery materials modeling.

25 ENERGY STORAGE↗

DOE OSTI2025

Alkali-induced catalytic tuning at metal and metal oxide interfaces

Alkali metals have been recognized as effective promoters in heterogeneous catalysis, capable of enhancing catalytic activity and tuning product distributions. Over the past few decades, significant efforts have been made aiming to reveal the mechanisms underlying the promoting effect of alkalis. However, the roles that alkali metals play in the catalytic process remain elusive due to challenges in capturing their catalytic behaviours upon exposure to reactive environments. This review summarizes recent surface science and theoretical studies of alkali (potassium, cesium)-decorated metal and metal oxide model catalysts, revealing the crucial tuning by alkalis of activity and selectivity for CO 2 hydrogenation. The analysis of electronic structures identifies the selective binding mechanism of the positively charged alkali ions on the surface, being able to reduce the surface work function and lead to strong electron polarization on the surfaces. Depending on the alkali–support interaction, the deposition of alkalis can selectively modify the bindings of reaction intermediates involved in CO 2 hydrogenation via the interplay among the ionic, covalent and electrostatic tunings. As a result, CO 2 can be effectively activated and converted into diverse products at the alkali–support interface, ranging from formic acid to methanol and ethanol. The identified selective bond-tuning advances the application of alkalis in promoting catalytic activity and controlling catalytic selectivity at alkali–support interfaces.

03 NATURAL GAS↗

DOE OSTI2024

Influence of zwitterionic amphiphilic copolymers on heterogeneous gypsum formation: A promising approach for scaling resistance

Here, this study aims to investigate the influence of zwitterionic amphiphilic copolymers (ZACs) in the nucleation and growth of heterogeneous CaSO4 at the zwitterion-water interface, which is crucial for the prevention of mineral scaling and consequent downtime or suboptimal performance in industries like membrane desalination, heat exchangers, and pipeline transportation. In situ grazing incidence small angle X-ray Scattering (GISAXS), and quartz crystal microbalance with dissipation (QCM-D) techniques were used to analyze the evolution of CaSO 4 particles on two new ZAC coatings: poly-(trifluoroethyl methacrylate-random-sulfobetaine methacrylate) (PTFEMA-r-SBMA, or PT:SBMA) and poly(trifluoroethyl methacrylate-random-2-methacryloyloxyethyl phosphorylcholine) (PTFEMA-r-MPC, or PT:MPC). The results showed that PT:MPC coatings promoted nucleation but inhibited crystal growth, resulting in slower overall reaction kinetics on PT:MPC coatings compared to PT:SBMA coatings. Interfacial interactions involving the substrates, sulfate minerals, and ions were examined, revealing that calcium ion adsorption, primarily governed by electrostatic attraction, played a crucial role in the nucleation and growth processes on both ZAC coatings. The crystal characterization revealed a phase transition from bassanite to gypsum on both ZAC coatings, suggesting that these zwitterionic materials can influence the mineral phase of heterogeneously formed CaSO 4 crystals. These findings enhance our understanding of the fundamental mechanisms underlying heterogeneous CaSO 4 scaling in the presence of zwitterionic materials.

42 ENGINEERING↗

DOE OSTI2021

Chemical Heterogeneity in PAN/LLZTO Composite Electrolytes by Synchrotron Imaging

Solid polymer/ceramic composite electrolytes are promising for batteries due to their attractive thermal stability and mechanical properties. Chemical heterogeneity in solid composite electrolytes, such as the inhomogeneity in the ceramic phase and salt distribution at the polymer/ceramic interface, is critical to the performance of solid composite electrolytes. However, such heterogeneity has not been well understood yet. In this work, we use Synchrotron-based X-ray fluorescence imaging (XRF) and Transmission X-ray Microscope (TXM) to image nanoscale chemical heterogeneity in polyacrylamide/Li 7+x La 3 Zr 2–x Ta x O 12 (LLZTO) composite electrolytes and investigate the effects of lithium salt, salt concentration, and plasticizer. We find that LLZTO particles show strong inter- and intra-particles chemical heterogeneities, and the off-stoichiometry of Zr in an LLZTO particle is unlikely to be only balanced by Ta substitution. Moreover, statistical analysis suggests that LiI tends to accumulate at the ceramic/polymer interface at a low concentration of 5 wt%, but no such tendency was observed in samples with 10 wt% LiI. However, composite electrolytes with LiTFSI show interfacial accumulation at both 5 wt% and 10 wt%. Furthermore, this report provides insight into element distributions in solid composite electrolytes, and we hope further researches can shed light on the connections between chemical heterogeneity and ionic transport pathway inside.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Correcting implicit solvation at metal/water interfaces through the incorporation of competitive water adsorption

Conventional continuum solvation models are ubiquitous in computational catalysis, including for describing metal/water interfaces, which are relevant to both solution-phase heterogeneous catalysis and electrocatalysis. Nonetheless, we find that such continuum models qualitatively fail to describe both the adsorption free energy and conformational preference for many organic molecules at such interfaces, largely due to the failure of continuum models to incorporate the role of competitive water adsorption. We develop a simple phenomenological model that accounts for competitive water adsorption and show that the model, when used in conjunction with continuum solvation, provides a dramatic improvement in the description of both adsorption and conformational preference. The model is also extended to additionally incorporate the influence of applied potential at the electrode surface, thus facilitating computationally efficient applications to scenarios including electrocatalysis.

Chemistry↗

DOE OSTI2023

Boosting Piezoelectricity by 3D Printing PVDF‐MoS 2 Composite as a Conformal and High‐Sensitivity Piezoelectric Sensor

Abstract Additively manufactured flexible and high‐performance piezoelectric devices are highly desirable for sensing and energy harvesting of 3D conformal structures. Herein, the study reports a significantly enhanced piezoelectricity in polyvinylidene fluoride (PVDF) achieved through the in situ dipole alignment of PVDF within PVDF‐2D molybdenum disulfide (2D MoS 2 ) composite by 3D printing. The shear stress‐induced dipole poling of PVDF and 2D MoS 2 alignment are harnessed during 3D printing to boost piezoelectricity without requiring a post‐poling process. The results show a remarkable, more than the eight‐fold increment in the piezoelectric coefficient ( d 33 ) for 3D printed PVDF‐8wt.% MoS 2 composite over cast neat PVDF. The underlying mechanism of piezoelectric property enhancement is attributed to the increased volume fraction of β phase in PVDF, filler fraction, heterogeneous strain distribution around PVDF‐MoS 2 interfaces, and strain transfer to the nanofillers as confirmed by microstructural analysis and finite element simulation. These results provide a promising route to design and fabricate high‐performance 3D piezoelectric devices via 3D printing for next‐generation sensors and mechanical–electronic conformal devices.

2D MoS2↗

DOE OSTI2024

A Personal Journey in Nanoscience via Developing and Applying Liquid Phase TEM

Liquid phase TEM has attracted widespread attention in recent years as a groundbreaking tool to address various fundamental problems in nanoscience. It has provided the opportunity to reveal many unseen dynamic phenomena of nanoscale materials in solution processes by direct imaging through liquids with high spatial and temporal resolution. After my earlier work on real-time imaging of the nucleation, growth, and dynamic motion of nanoparticles in liquids by developing high-resolution liquid phase transmission electron microscopy (TEM) down to the sub-nanometer level, I established my own research group at Lawrence Berkeley National Lab in 2010. My group focuses on developing and applying liquid phase TEM to investigate complex systems and reactions. We have studied a set of scientific problems centered on understanding how atomic level heterogeneity and fluctuations at solid-liquid interfaces impact nanoscale materials transformations using advanced liquid phase TEM. This article describes my personal journey in nanoscience, highlighting the main discoveries of my research group using liquid phase TEM as a unique tool. Some perspectives on the impacts of liquid phase TEM and the future opportunities in nanoscience and nanotechnology enabled by liquid phase TEM are also included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Hydrogen migration at restructuring palladium–silver oxide boundaries dramatically enhances reduction rate of silver oxide

Heterogeneous catalysts are complex materials with multiple interfaces. A critical proposition in exploiting bifunctionality in alloy catalysts is to achieve surface migration across interfaces separating functionally dissimilar regions. Herein, we demonstrate the enhancement of more than 10 4 in the rate of molecular hydrogen reduction of a silver surface oxide in the presence of palladium oxide compared to pure silver oxide resulting from the transfer of atomic hydrogen from palladium oxide islands onto the surrounding surface formed from oxidation of a palladium-silver alloy. The palladium-silver interface also dynamically restructures during reduction, resulting in silver-palladium intermixing. This study clearly demonstrates the migration of reaction intermediates and catalyst material across surface interfacial boundaries in alloys with a significant effect on surface reactivity, having broad implications for the catalytic function of bimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Materials data science using CRADLE: A distributed, data-centric approach

Abstract There is a paradigm shift towards data-centric AI, where model efficacy relies on quality, unified data. The common research analytics and data lifecycle environment (CRADLE™) is an infrastructure and framework that supports a data-centric paradigm and materials data science at scale through heterogeneous data management, elastic scaling, and accessible interfaces. We demonstrate CRADLE’s capabilities through five materials science studies: phase identification in X-ray diffraction, defect segmentation in X-ray computed tomography, polymer crystallization analysis in atomic force microscopy, feature extraction from additive manufacturing, and geospatial data fusion. CRADLE catalyzes scalable, reproducible insights to transform how data is captured, stored, and analyzed. Graphical abstract

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1990

Ground Systems Development Environment (GSDE) interface requirements and prototyping plan

This report describes the data collection and requirements analysis effort of the Ground System Development Environment (GSDE) Interface Requirements study. It identifies potential problems in the interfaces among applications and processors in the heterogeneous systems that comprises the GSDE. It describes possible strategies for addressing those problems. It also identifies areas for further research and prototyping to demonstrate the capabilities and feasibility of those strategies and defines a plan for building the necessary software prototypes.

Church, Victor E.↗

NASA NTRS1993

Interoperability through standardization: Electronic mail, and X Window systems

Since the introduction of computing machines, there has been continual advances in computer and communication technologies and approaching limits. The user interface has evolved from a row of switches, character based interface using teletype terminals and then video terminals, to present day graphical user interface. It is expected that next significant advances will come in the availability of services, such as electronic mail and directory services, as the standards for applications are developed and in the 'easy to use' interfaces, such as Graphical User Interface for example Window and X Window, which are being standardized. Various proprietary electronic mail (email) systems are in use within organizations at each center of NASA. Each system provides email services to users within an organization, however the support for email services across organizations and across centers exists at centers to a varying degree and is often easy to use. A recent NASA email initiative is intended 'to provide a simple way to send email across organizational boundaries without disruption of installed base.' The initiative calls for integration of existing organizational email systems through gateways connected by a message switch, supporting X.400 and SMTP protocols, to create a NASA wide email system and for implementation of NASA wide email directory services based on OSI standard X.500. A brief overview of MSFC efforts as a part of this initiative are described. Window based graphical user interfaces make computers easy to use. X window protocol has been developed at Massachusetts Institute of Technology in 1984/1985 to provide uniform window based interface in a distributed computing environment with heterogenous computers. It has since become a standard supported by a number of major manufacturers. Z Windows systems, terminals and workstations, and X Window applications are becoming available. However impact of its use in the Local Area Network environment on the network traffic are not well understood. It is expected that the use of X Windows systems will increase at MSFC especially for Unix based systems. An overview of X Window protocol is presented and its impact on the network traffic is examined. It is proposed that an analytical model of X Window systems in the network environment be developed and validated through the use of measurements to generate application and user profiles.

Amin, Ashok T.↗

NASA NTRS2012

Data Distribution System (DDS) and Solar Dynamic Observatory Ground Station (SDOGS) Integration Manager

The DDS SDOGS Integration Manager (DSIM) provides translation between native control and status formats for systems within DDS and SDOGS, and the ASIST (Advanced Spacecraft Integration and System Test) control environment in the SDO MOC (Solar Dynamics Observatory Mission Operations Center). This system was created in response for a need to centralize remote monitor and control of SDO Ground Station equipments using ASIST control environment in SDO MOC, and to have configurable table definition for equipment. It provides translation of status and monitoring information from the native systems into ASIST-readable format to display on pages in the MOC. The manager is lightweight, user friendly, and efficient. It allows data trending, correlation, and storing. It allows using ASIST as common interface for remote monitor and control of heterogeneous equipments. It also provides failover capability to back up machines.

Pham, Kim↗

NASA NTRSDate not supplied

Bridging the Last Mile with Open-Source Advancements: Empowering Communities through Fusion of Aerosol Optical Depth (AOD) Products from Multi-Satellite Sensors

Aerosol Optical Depth (AOD) is a crucial parameter for understanding atmospheric aerosol distribution and their impact on climate and air quality. With the growing number of Earth observation satellites, there is an abundance of AOD products derived from various sensors onboard both geostationary and low-orbit satellites. The availability of multiple datasets provides an opportunity to harness the strengths of each sensor and create comprehensive and accurate AOD datasets for climate and air quality studies at different temporal and spatial scales. Our NASA aerosol MEaSURES project has made significant strides in recent years by undertaking the ambitious task of developing an open-source package tailored for fusing AOD products from different sources. The package is based on OOP (Object-Oriented Programming) design and is implemented in Python modules. Generic interfaces enable easy inclusion of large and heterogeneous data. The package may be utilized to produce harmonized AOD datasets with enhanced spatial and temporal coverage. The latest version of the package is able to process and integrate the dark-target AOD data from six different sensors: AHI Himawari-8, ABI GOES-West, ABI GOES-East, MODIS AQUA, MODIS TERRA, and VIIRS SNPP. Rigorous validation and intercomparison studies have been performed to assess the accuracy and reliability of the fused AOD product against ground-based measurements and reference datasets. The open-source nature of the developed package ensures transparency, reproducibility, and community engagement. The research community and stakeholders can access, contribute to, and further improve the fusion methodology, making it adaptable to other studies, or expanding it to include new satellite data as they become available. In this poster presentation, we will introduce the accomplishments and challenges faced during the development of the open-source package for AOD data fusion, and demonstrate the advantages of combining AOD products from the six aforementioned satellite sensors. The presentation aims to foster discussions, collaborations, and future directions in integrating Earth observation and remote sensing data, which may contribute to a better understanding of atmospheric aerosols and their impacts on our environment.

Zhaohui Zhang↗