Search NASA⌕ Search

SEARCH · Search NASA

Results for “High density carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Strain-Induced Shifts in Defective Graphite Phonon Modes Predicted by Density Functional Theory

Carbon fiber composites have gained attention as a structural material because of their high strength-to-weight ratio, and understanding the effect of defects on reactivity and mechanical properties is important for the longevity and safety of the composite. Although it is known that strain causes the underlying graphitic vibrational modes to redshift, it is not clear how strain may alter reactivity and defect-induced vibrational changes. To investigate the strain-induced phonon changes of defective carbon fiber composites, density functional theory calculations of graphite are used, including intercalated hydrogen and fluorine defects. By comparing changes in the bond lengths, formation energies, and phonon density of states for uniaxially and biaxially strained graphite, strain was found to generally make defect formation more favorable and the specific behavior changes are dependent on the strain direction and defect identity. Specifically, intercalated fluorine phonons are more sensitive to strain than hydrogen intercalation phonons, and strain applied along the zigzag direction alters the calculated properties more than strain along the armchair direction. Finally, these results highlight the importance of understanding the microstructural effect of deviations from the ideal material because small changes in strain or defect type can significantly alter the behavior of the carbon fiber composite core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗
DOE OSTI2023

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗
DOE OSTI2026

Binder-Free Graphite Anodes for Next-Generation High-Performance Lithium-Ion Batteries

High-energy density anodes are crucial for next-generation lithium-ion batteries (LIBs) particularly for electric vehicle (EV) applications. Sluggish lithium-diffusion kinetics coupled with conventional anode fabrication processes containing polymeric binders hinder fast-charging capabilities and high-energy density of graphite. Herein, we introduce a binder-free graphite anode fabrication strategy using the electrospinning technique that contains ~2.41% carbon nanotubes (CNTs). Our strategy relies on the formation of an interconnecting conductive CNT network coupled with an ultrathin N-doped carbon coating on graphite particles from sacrificial binders. This combination enhances both structural integrity and electrical conductivity and, in turn, improves fast-charging capabilities and high energy density of LIBs. The binder-free graphite anode achieves ~335.0 mAh g–1 capacity at C/3 rate over 400 cycles with capacity retention of >95% and average Coulombic efficiencies >99.95%. These promising results suggest that the binder-free anode fabrication with a multifunctional design approach could elevate the energy-density limits of the graphite anodes, solving high-energy density requirements of EVs, and potentially provides a path forward for the development of economically feasible energy storage systems for various applications.

Ozcan, Muca [ORNL] (ORCID:0000000320020474)↗
DOE OSTI2024

Structure–performance relationships of lithium-ion battery cathodes revealed by contrast-variation small-angle neutron scattering

Lithium-ion battery cathodes are porous composites of active material, conductive carbon, and polymer binder. Controlling the cathode microstructure is key to achieving high energy density and cycling stability. Current characterization techniques lack the nanoscale resolution over representative volumes necessary to relate cathode microstructure to cycling performance. To address this challenge, we utilize contrast-variation small-angle neutron scattering to quantify the chemical and structural features of cathodes wet by dimethyl carbonate, representing a relevant solvent environment. Using neutron scattering measurements, we identify an expansion in carbon and polymer structures that arises after calendering and wetting with solvent. Further, we deconvolute the carbon and binder phases to obtain the solvent-accessible carbon black surface area, which we correlate to diminished capacity retention driven by electrolyte decomposition on exposed carbon. This technique provides nanoscale insight into composite cathode microstructures and resulting cycling performance, promising future applications to a broad range of porous materials that exist in energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Electrical and structural characterization of nano-carbon–aluminum composites fabricated by electro-charging-assisted process

Incorporating nano-carbon phases into metal-matrix composites is a promising strategy for simultaneously enhancing electrical conductivity and mechanical properties of metals. Here, we describe the manufacture of novel nano-carbonaluminum composites by an electro-charge-assisted process (EAP) that show 5.6% ± 1.7% increase in electrical conductivity compared to the base metal alloy. The source of nano-carbon that we used in this study is activated carbon with particle size less than 100 nm. The enhancement is attributed to nano-graphitic structures that extend through the lattice of the metal. Through electron transfer from the metal to the nanostructures the electron density at the interface of nano-crystalline graphite and the metal lattice increases thereby enhancing the bulk electrical conductivity. We identify the important fabrication parameters of the EAP for a reaction system employing a tapered graphite cathode. Here, a high current density of 100 A/cm 2 causes ionization and crystallization of the carbon in the liquid metal. The increase in electrical conductivity of the composite are directly related to the incorporation of the nanocrystalline carbon in the metal lattice. The superior performance of these nano-carbon aluminum composites makes them promising candidates for power transmission lines and other applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

An Experimental Investigation of Supercritical Methane Injection Characteristics in a CO2 Environment

Abstract Clean energy generation is gaining significant attention from industries, academia, and governments across the globe. The Allam cycle is one such technology that has been under focus due to its efficiency, environmental friendliness, and economics. This is a direct-fired cycle operating at supercritical conditions using carbon dioxide as a working fluid. Fuel or oxidizer jet mixing with CO2 is a vital phenomenon that governs combustion efficiency, and it is not well understood for the Allam cycle conditions. This paper experimentally investigated the jet characteristics of a methane jet injected into a subcritical to supercritical carbon dioxide environment. A wide range of injection pressures and temperatures were targeted between subcritical to supercritical conditions. Unlike previous studies, the current work focused on injecting lower-density (methane) jets into higher-density (carbon dioxide) environments. Schlieren imaging and methane absorption measurements were simultaneously performed with a CMOS high-speed camera and a 3.39 μm infrared laser. Specifically, we looked at the classical injection parameter of jet spreading angle, which was classically established to be mainly a density ratio function. Here, the jet cone angle was obtained from the postprocessed schlieren imaging. The jet cone angle is a critical characteristic parameter that describes the entrainment rate in a jet; thus, it is a crucial parameter in understanding the nature of the jet. The laser measurements were only used as an additional check to confirm the entry time of methane into the chamber filled with carbon dioxide. Notably, this paper makes a detailed comparison between the jet cone angles of jets with a density ratio. The result showed that the classical correlations, such as Abramovich's theory applied to submerged turbulent gas jets developed for low-density ratio jets, were unsuitable for higher-density ratio jets. It was also observed that the divergence angles were dependent not only on density ratio but also on other parameters such as pressure ratios and reduced pressures.

Engineering↗
DOE OSTI2022

Techno-Economic Evaluation of Strategies to Approach Net-Zero Carbon Sustainable Aviation Fuel via Woody Biomass Gasification and Fischer-Tropsch Synthesis

Reducing the carbon dioxide (CO2) emissions from the transportation industry is a key target for achieving global net-zero carbon goals. Wide-spread electrification, efficient engine design, and alternative fuel implementations have been introduced for light-duty vehicles and are projected to significantly reduce light-duty emissions in the near future. Conversely, the aviation sector contributes considerably towards transportation-based carbon emissions, but current projections do not show substantial reductions in carbon emissions over time. Challenges for the aviation sector include low compatibility with electrification, relative inflexibility to variations in fuel properties, and requirement of high energy density fuels. Thus, identifying pathways to decarbonize the aviation sector via liquid low- or net-zero carbon biofuels that are compatible with current aviation infrastructure is crucial. This work investigates the economic feasibility of approaching net-zero carbon sustainable aviation fuel (SAF) from woody biomass via gasification and Fischer-Tropsch synthesis. In doing so, this assessment identifies the economic opportunities and trade-offs of several carbon mitigation strategies coupled with renewable resource interventions required to approach net-zero carbon fuels via biomass. Renewable natural gas and green hydrogen utilization strategies are assessed to examine the impact of fuel yield improvements versus renewable resource cost. Additionally, both carbon capture and sequestration (CCS) and carbon capture and utilization (CCU) are considered in this analysis to help mitigate carbon loss to the atmosphere. Each scenario was assessed on cost, carbon efficiency, energy efficiency, and overall technology-readiness level (TRL). The results of this analysis show that renewable natural gas, green hydrogen, and CCS can be viewed as a low-cost, near-term carbon abatement strategies. However, in the long-term, deployment of more expensive and less technologically mature CCU technologies can make use of point sources of CO2 to boost overall fuel production.

aviation fuel↗
DOE OSTI2023

A04-0491 - Reduced Electrolyte Reactivity of Pitch-Carbon Coated Si Nanoparticles for Li-Ion Battery Anodes

Silicon-based anodes for Li-ion batteries (LIB) have the potential to increase the energy density over graphite-based LIB anodes. However, silicon anodes exhibit poor cycle and calendar lifetimes due to mechanical instabilities and high chemical reactivity with the carbonate-based electrolytes that are typically used in LIBs. In this work, we synthesize a pitch-carbon coated silicon nanoparticle composite active material for LIB anodes that exhibits reduced chemical reactivity with the carbonate electrolyte compared to an uncoated silicon anode. Silicon primary particle sizes <10 nm minimize micro-scale mechanical degradation of the anode composite, while conformal coatings of pitch-carbon minimized the parasitic reactions between the silicon and the electrolyte. When matched with a high voltage NMC622 cathode, the pitch-carbon coated Si anode retains -75% of its initial capacity over 1000 cycles. Efforts to increase the areal loading of the pitch-carbon coated silicon anodes to realize real energy density improvements over graphite anodes results in severe mechanical degradation on the electrode level. Developing procedures to engineer the architecture of the composite silicon anode may be a solution to this mechanical challenge.

DIRECT ENERGY CONVERSION,ENERGY STORAGE↗
DOE OSTI2023

Regulating Catalytic Properties and Thermal Stability of Pt and PtCo Intermetallic Fuel-Cell Catalysts via Strong Coupling Effects between Single-Metal Site-Rich Carbon and Pt

Developing low platinum-group-metal (PGM) catalysts for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs) for heavy-duty vehicles (HDVs) remains a great challenge due to the highly demanded power density and long-term durability. Here, this work explores the possible synergistic effect between single Mn site-rich carbon (Mn SA -NC) and Pt nanoparticles, aiming to improve intrinsic activity and stability of PGM catalysts. Density functional theory (DFT) calculations predicted a strong coupling effect between Pt and MnN 4 sites in the carbon support, strengthening their interactions to immobilize Pt nanoparticles during the ORR. The adjacent MnN 4 sites weaken oxygen adsorption at Pt to enhance intrinsic activity. Well-dispersed Pt (2.1 nm) and ordered L1 2 -Pt 3 Co nanoparticles (3.3 nm) were retained on the Mn SA -NC support after indispensable high-temperature annealing up to 800 °C, suggesting enhanced thermal stability. Both PGM catalysts were thoroughly studied in membrane electrode assemblies (MEAs), showing compelling performance and durability. The Pt@Mn SA -NC catalyst achieved a mass activity (MA) of 0.63 A mg Pt –1 at 0.9 V iR-free and maintained 78% of its initial performance after a 30,000-cycle accelerated stress test (AST). The L1 2 -Pt 3 Co@Mn SA -NC catalyst accomplished a much higher MA of 0.91 A mg Pt –1 and a current density of 1.63 A cm –2 at 0.7 V under traditional light-duty vehicle (LDV) H 2 –air conditions (150 kPa abs and 0.10 mg Pt cm –2 ). Furthermore, the same catalyst in an HDV MEA (250 kPa abs and 0.20 mg Pt cm –2 ) delivered 1.75 A cm –2 at 0.7 V, only losing 18% performance after 90,000 cycles of the AST, demonstrating great potential to meet the DOE targets.

25 ENERGY STORAGE↗
DOE OSTI2021

Robust Solid/Electrolyte Interphase (SEI) formation on Si Anodes Using Glyme-based Electrolytes

Silicon (Si) is the most naturally abundant element possessing 10-fold theoretical capacity than graphitebased anodes. The practicality of implementing Si anodes is, however limited by the unstable solidelectrolyte interphase (SEI) and anode fracturing during continuous lithiation/delithiation. We demonstrate that glyme-based electrolytes (GlyEls) assure a conformal SEI on Si and keep the Si ‘fracture-free’. Benchmarking against the optimal, commonly-used carbonate electrolyte with the fluoroethylene carbonate (FEC) additive, Si anode cycled in a GlyEl exhibits reduced early parasitic current (by 62.5%) and interfacial resistance (by 72.8%), while the cell capacity retention is promoted by >7% over a course of 110 cycles. The mechanistic investigation by X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) indicates GlyEl enriches Si SEI with elastic polyether but diminishes its carbonate species. Glyme-based electrolytes prove viable in stabilizing the SEI on silicon for future high energy density lithium-ion batteries.

Yang, Guang↗
DOE OSTI2020

Achieving high volumetric EDLC carbons via hydrothermal carbonization and cyclic activation

A novel activation method involving hydrothermal carbonization (HTC) and a pressure-induced low temperature oxidation has been demonstrated for cellulose derived HTC char by using hydrogen peroxide as an active di-oxygen source. The optimized porosity versus gravimetric capacitance results from cellulose derived HTC char synthesized at 220 °C. Almost homogeneous and small particle size micro-ellipse/sphere, relatively high surface area and narrow pore size distributions lead to a high bulk density, i.e. 0.73 g cm -3 , of coating type electrodes, which is much denser than those manufactured from steam activated carbons for supercapacitor industry, i.e., 0.52 g cm -3 . The resulting carbon prepared herein achieves a relatively high volumetric capacitance in an organic electrolyte-based supercapacitor reaching a competitive value of industrial system with the features of environment friendly, cost-effective as well as high yield, and less energy consumption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electro-activated indigos intensify ampere-level CO 2 reduction to CO on silver catalysts

The electrochemical reduction of carbon dioxide (CO 2 ) to carbon monoxide (CO) is challenged by a selectivity decline at high current densities. Here we report a class of indigo-based molecular promoters with redox-active CO 2 binding sites to enhance the high-rate conversion of CO 2 to CO on silver (Ag) catalysts. Theoretical calculations and in situ spectroscopy analyses demonstrate that the synergistic effect at the interface of indigo-derived compounds and Ag nanoparticles could activate CO 2 molecules and accelerate the formation of key intermediates (*CO 2 – and *COOH) in the CO pathway. Indigo derivatives with electron-withdrawing groups further reduce the overpotential for CO production upon optimizing the interfacial CO 2 binding affinity. By integrating the molecular design of redox-active centres with the defect engineering of Ag structures, we achieve a Faradaic efficiency for CO exceeding 90% across a current density range of 0.10 − 1.20 A cm –2 . The Ag mass activity toward CO increases to 174 A mg –1 Ag . This work showcases that employing redox-active CO 2 sorbents as surface modification agents is a highly effective strategy to intensify the reactivity of electrochemical CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stable and high voltage and power output of CEA-MFCs internally connected in series (iCiS-MFC)

The voltage output of a single MFC is normally less than 0.8 V, often less than 0.3 V at maximum power output, which greatly limits the application of MFCs. When MFCs are scaled up, however, increasing reactor size has typically resulted in decreased power density. In this study, we developed a novel MFC configuration that contains multiple cloth electrode assemblies in which the MFCs were internally connected in series (iCiS-MFC). The iCiS-MFC, equivalent to 3 CEA-MFCs, produced a high voltage output over 1.8 V and a maximum power density of 3.5 W m -2 using carbon cloth cathodes containing activated carbon as the catalyst. This power density is 6% higher than that reported for a similar smaller CEA-MFC, indicating that power can be maintained during scale-up with a greater than 33-fold increase in total cathode surface area and greater than 20-fold increase in reactor volume. High stability was also demonstrated based on the performance of the iCiS-MFC over a period of one year of operation. The high power and stability is likely due, in part, to a more efficient means of current collection through the internal series connection, which also avoids the use of expensive current collectors. These results clearly demonstrate the great potential of this MFC design for further scaling-up.

25 ENERGY STORAGE↗
DOE OSTI2025

Highly dense atomic Fe–Ni dual metal sites for efficient CO 2 to CO electrolyzers at industrial current densities

Carbon-supported, atomically dispersed, nitrogen-coordinated metal sites (e.g., Fe and Ni) are arguably the most promising catalysts for the electrochemical reduction of CO 2 to CO due to their unique catalytic properties and the use of earth-abundant elements. However, conventional single metal sites are constrained by their structural simplicity, causing either too weak or too strong absorption/desorption of multiple critical intermediates (e.g., *COOH and *CO). Current catalysts also suffer from ultra-low loadings (<1.0 wt%) of atomic metal active sites in catalysts, leading to inadequate performance for CO 2 -to-CO conversion. Here, we develop dual Ni/Fe metal site catalysts with significantly increased atomically dispersed metal loadings (up to 4.8 wt%). A gas-phase chemical vapor deposition (CVD) approach to introducing single Ni sites was integrated with Fe 2 O 3 /ZIF-8 precursors, followed by an optimal thermal activation. The optimized CVD-Ni/Fe–N–C catalyst exhibited remarkable electrocatalytic performance for the CO 2 reduction to CO in a continuous membrane-electrode-assembly electrolyzer, achieving a maximum CO faradaic efficiency (FE CO ) of 96% at a current density of 700 mA cm −2 in a near-neutral electrolyte. Furthermore, a desirable but challenging acidic flow-cell electrolyzer was designed using this dual metal site catalyst to improve CO 2 utilization, accomplishing a FE CO of up to 95% at a CO partial current density close to 600 mA cm −2 . Density functional theory (DFT) calculations suggest a synergetic effect between Fe–Ni pairs facilitating *COOH intermediate formation and *CO desorption simultaneously during CO 2 to CO conversion. This is key to breaking the linear scaling relationship of conventional single-metal site catalysts during the CO 2 reduction reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Binder-Stabilized Carbon Fiber Hosts for High-Utilization Sodium–Polysulfide Flow Catholytes

Sodium-sulfur (Na-S) batteries hold promise as high-energy-density batteries for long-duration energy storage due to their high open circuit voltage and Earth-abundant active materials. However, low utilization of the sulfur active material limits the achievable specific capacity, especially when a liquid polysulfide catholyte is utilized. High-surface-area carbon materials demonstrate promise to increase sulfur utilization in a Na-S battery. To make the carbon host material applicable for a flow battery application, a binder is required to bind the carbon materials together and to a porous substrate. Here, we utilize a composite carbon paper electrode coated by polymer,carbon nanofibers (CNFs) and carbon black (CB). By varying the mass ratios of CNF to CB, we found that a 70/20/10 mass ratio of CNF/CB/binder provided the highest capacity (260 mAh g −1 compared to the baseline of 156 mAh g −1 ) and stable battery performance over 100 cycles. Analysis of the composite electrode and full cells reveals that the amount of CB in the composite electrode influences binder distribution, cell resistance, and full cell performance.

Lehmann, Michelle L. [Oak Ridge National Laborator↗
DOE OSTI2022

Ignition of Carbon Burning from Nuclear Fission in Compact Stars

Abstract Type Ia supernovae (SN Ia) are powerful stellar explosions that provide important distance indicators in cosmology. Recently, we proposed a new SN Ia mechanism that involves a nuclear fission chain reaction in an isolated white dwarf (WD). The first solids that form as a WD starts to freeze are actinide rich and potentially support a fission chain reaction. In this Letter, we explore thermonuclear ignition from fission heating. We perform thermal diffusion simulations and find at high densities, above about 7 × 10 8 g cm −3 , that fission heating can ignite carbon burning. This could produce an SN Ia or another kind of astrophysical transient.

79 ASTRONOMY AND ASTROPHYSICS↗