Search NASA⌕ Search

SEARCH · Search NASA

Results for “High velocity change”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

183 GHz water line variation: An energetic outburst in orion KL

Observations of the 3(13)-2(20) transition of water vapor in the direction of Ori MC1 in 1980 February show a 50% flux increase and an apparent additional red shift of approximately 2 km/s relative to the line observed in 1977 December. From a detailed examination of the amplitude and frequency calibration, it appears unlikely that the effect is due to systematic error. The increase is attributed to the appearance of a new component at a velocity of 12 km/s with respect to the local standard of rest. The new component also has broad wings. Increased emission from a region in the high-velocity core of Ori MC1 can be due either to additional far-IR radiation to pump the 1983 GHz transition or to a change in the physical conditions in the gas. Statistical equilibrium calculations using the large-velocity-gradient formalism were carried out to develop a model for the emission. The calculations support a model in which the gas in the region of enhanced emission is hotter than the dust. The temporal coincidence between the 183 GHZ increase and the 22 GH1 water maser outburst suggests a common, impulsive cause, which has heated the gas in a part of the HV source, enhancing the emission in both transitions.

Kuiper, T. B. H.↗
NASA NTRS1984

183 GHz water line variation - An energetic outburst in Orion KL

Observations of the 3(13)-2(20) transition of water vapor in the direction of Ori MC1 in 1980 February show a 50 percent flux increase and an apparent additional red shift of approximately 2 km/s relative to the line observed in 1977 December. From a detailed examination of the amplitude and frequency calibration, it appears unlikely that the effect is due to systematic error. The increase is attributed to the appearance of a new component at a velocity of 12 km/s with respect to the local standard of rest. The new component also has broad wings. Increased emission from a region in the high-velocity core of Ori MC1 can be due either to additional far-IR radiation to pump the 1983 GHz transition or to a change in the physical conditions in the gas. Statistical equilibrium calculations using the large-velocity-gradient formalism were carried out to develop a model for the emission. The calculations support a model in which the gas in the region of enhanced emission is hotter than the dust. The temporal coincidence between the 183 GHz increase and the 22 GH1 water maser outburst suggests a common, impulsive cause, which has heated the gas in a part of the HV source, enhancing the emission in both transitions.

Kuiper, T. B. H.↗
NASA NTRS1997

Photonic Switching Devices Using Light Bullets

The present invention is directed toward a unique ultra-fast, all-optical switching device or switch made with readily available, relatively inexpensive, highly nonlinear photonic glasses. These photonic glasses have a sufficiently negative group velocity dispersion and high nonlinear index of refraction to support stable light bullets. The light bullets counterpropagate through, and interact within the waveguide to selectively change each others' directions of propagation into predetermined channels. In one embodiment, the switch utilizes a rectangularly planar slab waveguide, and further includes two central channels and a plurality of lateral channels for guiding the light bullets into and out of the waveguide. One advantage presented by the present all-optical switching device lies in its practical use of light bullets, thus preventing the degeneration of the pulses due to dispersion and diffraction at the front and back of the pulses. Another feature of the switching device is the relative insensitivity of the collision process to the time difference in which the counter-propagating pulses enter the waveguide. since. contrary to conventional co-propagating spatial solitons, the relative phase of the colliding pulses does not affect the interaction of these pulses. Yet another feature of the present all-optical switching device is the selection of the light pulse parameters which enables the generation of light bullets in highly nonlinear glasses.

Goorjian, Peter M.↗
NASA NTRS2016

Observations of Turbulence in a Kelvin-Helmholtz Event on 8 September 2015 by the Magnetospheric Multiscale Mission

Spatial and high-time-resolution properties of the velocities, magnetic field, and 3-D electric field within plasma turbulence are examined observationally using data from the Magnetospheric Multiscale mission. Observations from a Kelvin-Helmholtz instability (KHI) on the Earth's magnetopause are examined, which both provides a series of repeatable intervals to analyze, giving better statistics, and provides a first look at the properties of turbulence in the KHI. For the first time direct observations of both the high-frequency ion and electron velocity spectra are examined, showing differing ion and electron behavior at kinetic scales. Temporal spectra exhibit power law behavior with changes in slope near the ion gyrofrequency and lower hybrid frequency. The work provides the first observational evidence for turbulent intermittency and anisotropy consistent with quasi two-dimensional turbulence in association with the KHI. The behavior of kinetic-scale intermittency is found to have differences from previous studies of solar wind turbulence, leading to novel insights on the turbulent dynamics in the KHI.

Stawarz, J. E.↗
NASA NTRS1999

Periodic Excitation for Jet Vectoring and Enhanced Spreading

The effects of periodic excitation on the evolution of a turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit and excitation was introduced at the junction between the jet exit and the diffuser inlet. The introduction of high amplitude periodic excitation at the jet exit enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Vectoring is achieved by applying the excitation over a fraction of the circumference of the circular jet, enhancing its spreading rate on the excited side and its tendency to reattach to that side. Static deflection studies demonstrate that the presence of the wide-angle diffuser increases the effectiveness of the added periodic momentum due to a favorable interaction between the excitation, the jet shear-layer and the diffuser wall. This point was further demonstrated by the evolution of a wave packet that was excited in the jet shear-layer. Strong amplification of the wave packet was measured with a diffuser attached to the jet exit. The turbulent jet responds quickly (10-20 msec) to step changes in the level of the excitation input. The response scales with the jet exit velocity and is independent of the Reynolds number. Jet deflection angles were found to be highly sensitive to the relative direction between the excitation and the jet flow and less sensitive to the excitation frequency. The higher jet deflection angles were obtained for a diffuser length of about two diameters and for diffusers with half-angles greater than 15 degrees.

Pack, LaTunia G.↗
NASA NTRS1978

Cyclic oxidation of coated Oxide Dispersion Strengthened (ODS) alloys in high velocity gas streams at 1100 deg C

Several overlay coatings on ODS NiCrAl's were tested in Mach 1 and Mach 0.3 burner rigs to examine oxidation and thermal fatigue performance. The coatings were applied by various methods. Based on weight change, macroscopic, and metallographic observations in Mach 1 tests Nascoat 70 on TD-NiCrAl exhibited the best oxidation resistance. In Mach 0.3 tests PWA 267 and ATD-1, about equally, were the best coatings on YD-NiCrAl (Nascoat 70 was not tested in Mach 0.3 rigs).

Gedwill, M. A.↗
NASA NTRS2002

Decelerated Magnetoshealth Plasma Flow at High Latitudes Behind the Cusp Region: Interball Tail Observations

On May 25, 1996 the Interball Tail spacecraft was moving through the northern hemisphere of the high-latitude magnetosphere on its outbound trajectory. It successively crossed lobe field lines followed by the high latitude magnetopause, then entering the magnetoshealth proper near the cusp region covering magnetic local time from 8h20m to 9h30m at magnetic latitudes of about 770. IMF observed by WIND was northward during the time interval of interest and favorable for reconnection at high latitude magnetopause. The well-defined De Hoffmann Teller frame and stress balance indicate that the magnetopause was a rotational discontinuity with ongoing reconnection. After the magnetopause crossing, the spacecraft observed decelerated magnetoshealth flow in the sub-Alvinic regime. A gradually increasing of the flow velocity is observed and the plasma flow regime changed from sub-Alfvnic through Alfinic to super-Alfvnic one. We explain these results by direct passing of the Interball Tail through the secondary stagnation point, which has been predicted by theoretical and semiempirical models of the high latitude magnetopause.

Avanov, L. A.↗
NASA NTRS1972

Corrections to vibrational transition probabilities calculated from a three-dimensional model.

Corrections to the collision-induced vibration transition probability calculated by Hansen and Pearson from a three-dimensional semiclassical model are examined. These corrections come from the retention of higher order terms in the expansion of the interaction potential and the use of the actual value of the deflection angle in the calculation of the transition probability. It is found that the contribution to the transition cross section from previously neglected potential terms can be significant for short range potentials and for the large relative collision velocities encountered at high temperatures. The correction to the transition cross section obtained from the use of actual deflection angles will not be appreciable unless the change in the rotational quantum number is large.

Stallcop, J. R.↗
NASA NTRS1973

Cyclic oxidation evaluation - Approaching application conditions.

Review of 1000 to 1200 C cyclic oxidation testing conducted on potential aircraft gas turbine Ni-, Co-, and Fe-base alloys. Furnace and burner rig testing are discussed, and the results are compared for selected alloys. The alloys fall into two groups, depending on their Cr and Al contents. One group forms mainly Cr2O3/chromite spinel scale(s), while the other forms alpha Al2O3/aluminate spinel scale(s). Spalling on thermal cycling leading to increased metal consumption is associated with the appearance of a chromite spinel. In the case of high-velocity burner rig tests this chromite forming tendency is reinforced by Cr2O3 vaporization depleting Cr in the alloy. In both types of tests, specific weight change is used as an indirect indicator of metal attack, since direct metal loss measurements require destructive analysis. An alternative nondestructive metal loss estimating parameter, based on a tentative mass balance gravimetric approach, shows some potential.

Barrett, C. A.↗
NASA NTRS2000

Stratospheric Temperature Trends from Small Rockets Between 1969-1995

Between 1958-1995 a significant number of small meteorological rocketsondes were launched by United States (US) agencies from as many as 30 sites to as few as 3-4 sites in 1995. Stratospheric temperature trends were derived for many of the sites for the period 1969-1995. Similar long-term trends also were derived using rocketsondes launched from sites of the Former Soviet Union (FSU). The advantage of these two particular sets of rocket temperature measurements is the internal consistency of the data. All measurements were made with the same instrument, i.e., Datasonde in the case of the US sites and the M100B in the case of the FSU sites. Data from each instrument type were processed using its unique reduction method. Thus, all data were processed in the same manner including the method of applying corrections (necessary because of thermal heating of the thermistor from the high fall velocities experienced and from radiation effects). Straight-line least squares fit to the data made to monthly-mean measurements gave a downward change of 2-3 K per decade. A more complex fitting algorithm would have resulted in finer results but the straight-line fit was adequate for the analysis presented. Trend data are presented for 50 km, 40 km, and 25 km altitude levels. Trends for the US and FSU sites are quite similar. The 25km (50-hPa) level data are compared with radiosonde temperatures. Temperature trends over the 25-year period is different at each of the sites and not always in the same direction.

Schmidlin, F. J.↗
NASA NTRS2004

Effects of Mean Flow Profiles on the Instability of a Low-Density Gas Jet Injected into a High-Density Gas

The effects of the mean velocity profiles on the instability characteristics in the near-injector region of axisymmetric low density gas jets injected vertically upwards into a high-density gas medium were investigated using linear inviscid stability analysis. The flow was assumed to be isothermal and locally parallel. Three velocity profiles, signifying different changes in the mean velocity in the shear layer, were used in the analysis. The effects of the inhomogeneous shear layer and the Froude number (signifying the effects of gravity) on the instability for each set of mean profiles were delineated. At a large Froude number (negligible gravity), a critical density ratio was found for the three profiles at which the jet became absolutely unstable. The critical density ratio for each velocity profile was increased as the Froude number was reduced. A critical Froude number was found for the three sets of profiles, below which the jet was absolutely unstable for all the density ratios less than unity, which demarcated the jet flow into the momentum-driven regime and the buoyancy-driven regime.

Vedantam, NandaKishore↗
DOE OSTI2024

Flame Flashback Investigations in Hydrogen-Enriched Low Swirl Flames using High-Speed Hydroxyl (OH) Planar Laser-Induced Fluorescence

This study reports flashback mechanism observed in hydrogen-enriched flames stabilized in a low swirl burner (LSB) at atmospheric pressure and temperature conditions. The fundamentals of hydrogen-rich stable flames and spatiotemporal investigation of flashback phenomena were observed experimentally using a high-repetition-rate nanosecond (ns)-duration hydroxyl radical planar laser-induced fluorescence (OH-PLIF) diagnostic. Testing was conducted in an optically accessible pre-mixing section of LSB with inlet pre-mixing velocities from 5 to 10 m/s for methane and hydrogen (50 – 90% by mole) blends. Swirlers with two different turning angles, 26 and 33 degrees and three different perforated plate hole diameters, 1.08, 1.12 and 1.16 mm with measured swirl numbers varying from 0.43 to 0.49 were used. The flashback propensity showed dependence on the proximity of the lifted flame to the burner exit which was dependent on pre-mixer velocity, hydrogen content and equivalence ratio (ER). High-speed OH-PLIF images revealed lifted flames were first observed at low ER condition which is changed to M-shaped flame attached to burner rim with the increase in ER. Then, further increase in ER triggers flame flashback into the nozzle. Flashback occurred when burning occurs in the outer shear layer and the leading flame brush ingresses into the nozzle.

Parajuli, Pradeep↗
DOE OSTI2023

Long-term ultrasonic monitoring of concrete affected by alkali-silica reaction

This article presents continuous monitoring results of alkali-silica reaction (ASR) development in concrete specimens for over 400 days using ultrasonic testing and expansion measurements. Eight concrete specimens with nonreactive aggregate (Control), reactive coarse aggregate, and reactive fine aggregates were cast with two reinforced confinement conditions. The specimens were conditioned in an environmental chamber with high temperature and humidity (38°C and 90% relative humidity) to accelerate the ASR development. A multichannel ultrasonic monitoring system was developed to collect ultrasonic signals automatically, and the expansions in three directions were measured periodically. Results showed that the relative velocity change could detect the ASR initiation in all reactive specimens and show a correlation with expansion in the early stage. However, these correlations are inconsistent for different ASR specimens, and the velocity change becomes less sensitive to ASR damage in the late stage (after 300 days). Irrecoverable velocity drop was observed during every chamber shutdown period, especially in specimens with higher levels of ASR damage. This phenomenon suggests that the nonlinear ultrasonic response caused by the ambient temperature variation may indicate the ASR damage.

Engineering↗
NASA NTRS1994

O(+)-O collision frequency in high-speed flows

Throughout much of the terrestrial thermosphere and ionosphere, the motions of the neutral and ionized constituents are closely coupled and relative velocities are small, of the order of 100 m/s or less. This is particularly true at midlatitudes to low latitudes where typical velocities in the neutral gas due to tidal forcing are only 20-50 m/s. However, the solar wind-magnetosphere interaction drives a large-scale convection pattern in the polar ionosphere. When the rapid adjustment of the plasma to changes in the solar wind is combined with the slower response of the more massive neutral gas, large relative velocities on the order of 1 km/s can exist for substantial lengths of time. This will be more common during periods of high geomagnetic activity, as a result of the greater number of magnetic substorms and other particle precipitation events. When a significant relative velocity is present, the calculation of interaction parameters of the two gases passing through each other, such as collision frequency, must include that velocity. These effects are usually neglected when interpreting wind and ion drift observations. We show how the collision frequency is affected by a directed velocity between any two gases interacting with a power law or exponential potential energy curved. The directed velocity increases the collision frequency at all temperatures for most ion-neutral interactions. For certain power law potentials, such as the charge quadrupole, the collision frequency is decreased. We present an analytic solution for the high-speed collision integral using the resonance charge exchange cross section.

Pesnell, William Dean↗
NASA NTRS2001

High-Speed Jet Noise Reduction NASA Perspective

History shows that the problem of high-speed jet noise reduction is difficult to solve. the good news is that high performance military aircraft noise is dominated by a single source called 'jet noise' (commercial aircraft have several sources). The bad news is that this source has been the subject of research for the past 50 years and progress has been incremental. Major jet noise reduction has been achieved through changing the cycle of the engine to reduce the jet exit velocity. Smaller reductions have been achieved using suppression devices like mixing enhancement and acoustic liners. Significant jet noise reduction without any performance loss is probably not possible! Recent NASA Noise Reduction Research Programs include the High Speed Research Program, Advanced Subsonic Technology Noise Reduction Program, Aerospace Propulsion and Power Program - Fundamental Noise, and Quiet Aircraft Technology Program.

Huff, Dennis L.↗
NASA NTRS1973

Cyclic oxidation evaluation: Approaching application conditions

A survey is presented of the cyclic furnace and burner rig oxidation facilities at NASA-Lewis Research Center together with a review of selected test results and an initial interpretation of the data obtained. Cyclic furnace tests are used to conveniently screen alloy oxidation resistance and spall tendency; high velocity tests further indicate dynamic environmental resistance. Alloys which form scales predominantly of Cr2O3/chromite spinel spall much more than those forming alpha Al2O3/aluminate spinel scales. Weight changes due to scale spalling were used to estimate alloy depletion/thickness losses.

Barrett, C. A.↗
NASA NTRS1973

Introduction to Voigt's wind power plant

The design and operation of a 100 kilowatt wind driven generator are reported. Its high speed three-bladed turbine operates at a height of 50 meters. Blades are rigidly connected to the hub and turbine revolutions change linearly with wind velocity, maintaining a constant speed ratio of blade tip velocity to wind velocity over the full predetermined wind range. Three generators installed in the gondola generate either dc or ac current. Based on local wind conditions, the device has a maximum output of 720 kilowatts at a wind velocity of 16 meters per second. Total electrical capacity is 750 kilowatts, and power output per year is 2,135,000 kilowatt/hours.

Tompkin, J.↗
NASA NTRS1983

Thermomechanical loading of multilayered cylindrical geometries in thermal cycling from 300 to 1300 K

The principal of multiple material layering is well known as an effective method of reducing heat transfer; however, thermal gradients can impose significant loads and lead to delamination and subsequent component failure. An analysis is developed and experimental data are discussed for the thermomechanical effects of multilayered materials on a heat sink substrate of cylindrical geometry subject to thermal cycling. The geometry is heated in cross-flow by a high-velocity flame and cooled in crossflow by ambient-temperature air from a critical flow orifice. Each layer of material possesses a threshold beyond which small changes in temperature or mechanical loading greatly influence the life in thermal cycling of the layered materials. Comparisons are made between the thermomechanical loads predicted by various numerical codes for the linear case and by a simplified analytic model.

Hendricks, R. C.↗