Search NASA⌕ Search

SEARCH · Search NASA

Results for “IPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CLEC12B suppresses lung cancer progression by inducing SHP-1 expression and inactivating the PI3K/AKT signaling pathway

Lung cancer is the leading cause of cancer mortality worldwide. CLEC12B, a C-type lectin-like receptor, is low-expressed in lung cancer tissues. However, the function of CLEC12B in lung cancer and its underlying mechanism remain unclear. Here, an obvious down-regulation of CLEC12B was observed in lung cancer cells compared with the normal lung epithelial cells. CLEC12B over-expression suppressed cell viability and cell cycle entry in lung cancer, along with the reduction of PCNA and cyclin D1 expressions, while silencing CLEC12B possessed the opposite effects. Over-expression of CLEC12B promoted lung cancer cell apoptosis, accompanied by decreased Bcl-2 and increased Bax, cleaved caspase-3 and cleaved caspase-9. Moreover, CLEC12B decreased phosphorylation of PI3K-p85 and AKT proteins. By contrast, CLEC12B knockdown activated the PI3K/AKT pathway. In vivo, CLEC12B inhibited tumor growth in lung cancer, which can be reversed by CLEC12B inhibition. Co-IP and immunofluorescence assays confirmed the interaction between CLEC12B and SHP-1, and CLEC12B over-expression increased SHP-1 level. Furthermore, knocking down SHP-1 abrogated the above biological phenotypes caused by CLEC12B elevation. Taken together, our findings demonstrate that CLEC12B serves as a tumor-suppressing gene in lung cancer through positively regulating SHP-1 expression, which may be mediated by the PI3K/AKT signaling pathway.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Ad-apoptin inhibits glycolysis, migration and invasion in lung cancer cells targeting AMPK/mTOR signaling pathway

Ad-apoptin is a recombinant oncolytic adenovirus constructed by our laboratory that can express apoptin. It can selectively kill tumor cells without damaging normal cells. This study investigated the effects of Ad-apoptin on glycolysis, migration and invasion of non-small cell lung cancer. Cell viability and apoptosis were detected by CCK-8 and flow cytometry, respectively. Glycolysis was investigated by glucose consumption, lactic acid production and glycolytic key enzyme protein levels. Migration and invasion were evaluated via wound healing, transwell assays and epithelial-mesenchymal transition (EMT) protein levels. The interaction between apoptin and AMPK was detected by Co-IP. A nude mice tumor model was established to investigate the anti-cancer role of Ad-apoptin in vivo. The results showed that Ad-apoptin inhibits cell viability and induces apoptosis of A549 and NCI–H23 cells. Ad-apoptin can reduce the glucose uptake and lactic production in lung cancer cells, and reduce the expression of related glycolysis-limiting enzymes. At the same time, Ad-apoptin inhibited the migration and invasion of lung cancer. Immunoprecipitation showed that apoptin and AMPK could interact directly. Moreover, knockdown of AMPK significantly attenuated the inhibitory effect of Ad-apoptin on glycolysis, migration and invasion of A549 and NCI–H23 cells. Ad-apoptin can inhibit the growth of tumors in nude mice. Compared with the control group, Ad-apoptin had a significant inhibitory effect on AMPK knockdown tumors. The immunohistochemical results of tumor tissues were consistent with those in vitro. Collectively, Ad-apoptin targets AMPK and inhibits glycolysis, migration and invasion of lung cancer cells through the AMPK/mTOR signaling pathway. This suggests that Ad-apoptin may have therapeutic potential for lung cancer by targeting AMPK activation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

In Situ High-Temperature Raman Spectroscopy of UCl 3 : A Combined Experimental and Theoretical Study

Uranium trichloride (UCl 3 ) has received growing interest for its use in uranium-fueled molten salt reactors and in the pyrochemical processing of used fuel. In this paper, we report for the first time the experimentally determined Raman spectra of UCl 3 , at both ambient condition and in situ high temperatures up to 871 K. The frequencies of five of the Raman-active vibrational modes (v i ) of UCl 3 exhibit a negative temperature derivative ((∂ν i /∂T) P ) with increasing temperature. Here, this red-shift behavior is likely due to the elongation of U–Cl bonds. The average isobaric mode Grüneisen parameter (γ iP = 0.91 ± 0.02) of UCl 3 was determined through use of the coefficient of thermal expansion published in Vogel et al. (2021) and the (∂ νi /∂T) P values determined in this study. These results are in general agreement with those calculated here by density functional theory (DFT+U). Finally, a comparison of the ambient band positions of UCl 3 to those of isostructural lanthanide (La–Eu) and actinide chlorides (Am–Cf) has been made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Navigating Large Chemical Spaces Using Graph Theory and Integer Programming

Navigating and analyzing large chemical spaces are necessary to accelerate the design and discovery of new molecules and chemical processes. In this work, we introduce a computational framework that integrates graph theory and integer programming to enable the efficient navigation of large chemical spaces. Our framework represents the chemical space as a graph, wherein nodes represent molecules and edges represent the degree of similarity or connectivity based on domain-specific information. Using the graph representation, we identify representative molecules by computing the so-called minimum dominating set (MDS), which in our context is the minimum set of molecules that is connected to all other molecules. We present a suite of solution strategies for the MDS problem including heuristic and rigorous integer programming (IP) approaches. We show that these approaches allow us to capture physicochemical properties and domain-specific logic and constraints, facilitating the identification of molecules with the target properties. We demonstrate the effectiveness of the proposed approach by navigating the chemical space of per- and polyfluoroalkyl substances (PFAS); this comprises approximately 15,000 molecular structures. We compare our framework against traditional dimensionality reduction and clustering methods such as t-SNE and K-means clustering.

Chemical structure↗
DOE OSTI2020

Spin–Orbit Matrix Elements for a Combined Spin-Flip and IP/EA approach

We introduce a practical approach for computing the Breit–Pauli spin–orbit matrix elements of multiconfigurational systems with both spin and spatial degeneracies based on our recently developed RAS-nSF-IP/EA method (Houck, S. E.; et al. J. Chem. Theory Comput. 2019, 15, 2278). The spin–orbit matrix elements over all the multiplet components are computed using a single one-particle reduced density matrix as a result of the Wigner–Eckart theorem. A mean field spin–orbit approximation was used to account for the two-electron contributions. Basis set dependence as well as the effect of including additional excitations is presented. The effect of correlating the core and semicore orbitals is also examined. Surprisingly accurate results are obtained for spin–orbit coupling constants, despite the fact that the efficient wave function approximations we research neglect the bulk of dynamical correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantitative Account of the Bonding Properties of a Rubredoxin Model Complex [Fe(SCH3)4]q, q = -2, -1, +2, +3

Iron-sulfur clusters play important roles in biology as parts of electron transfer chains and catalytic cofactors. Here, we report a detailed computational analysis of a structural model of the simplest natural iron-sulfur cluster of rubredoxin and its cationic counterparts. Specifically, we report results for the ground and low-lying electronically excited states of the complex [Fe(SCH3)4]2-/1-/2+/3+, using Multi-Reference (CASSCF, MRCISD), and Coupled Cluster [CCSD(T)] methodology in order to provide accurate adiabatic reduction energies, dissociation energies and insights into the bonding analysis. The nature of the Fe-S chemical bond and the magnitude of the ionization potentials in the anionic and cationic [Fe(SCH3)4] complexes offer a physical rationale for the relative stabilization, structure and speciation of these complexes. Anionic and cationic complexes present different types of chemical bonds: prevalently ionic in [Fe(SCH3)4]2-/1- complexes and covalent in [Fe(SCH3)4]2+/3+ complexes. The ionic bonds result in an energy gain for the transition [Fe(SCH3)4]2-®[Fe(SCH3)4]- (i.e., FeII®FeIII) of 1.5 eV, while the covalent bonds result in an energy loss for the transition [Fe(SCH3)4]2+®[Fe(SCH3)4]3+ of 16.6 eV, almost half of the IP of Fe2+. The ionic vs covalent bond character influences the Fe-S bond strength and length, i.e., ionic Fe-S bonds are longer than covalent ones by about 0.2 Å (for FeII) and 0.04 Å (for FeII). Finally, the average Fe-S heterolytic bond strength is 6.7 eV (FeII) and 14.6 (FeIII) eV at the RCCSD(T) level of theory.

Tzeli, Demeter↗
DOE OSTI2025

Room-temperature multiferroicity in sliding van der Waals semiconductors with sub-0.3 V switching

The search for van der Waals (vdW) multiferroic materials has been challenging but also holds great potential for the next-generation multifunctional nanoelectronics. The group-IV monochalcogenide, with an anisotropic puckered structure and an intrinsic in-plane polarization at room temperature, manifests itself as a promising candidate with coupled ferroelectric and ferroelastic order as the basis for multiferroic behavior. Unlike the intrinsic centrosymmetric AB stacking, we demonstrate a multiferroic phase of tin selenide (SnSe), where the inversion symmetry breaking is maintained in AA-stacked multilayers over a wide range of thicknesses. We observe that an interlayer-sliding-induced out-of-plane (OOP) ferroelectric polarization couples with the in-plane (IP) one, making it possible to control out-of-plane polarization via in-plane electric field and vice versa. Notably, thickness scaling yields a sub-0.3 V ferroelectric switching, which promises future low-power-consumption applications. Furthermore, coexisting armchair- and zigzag-like structural domains are imaged under electron microscopy, providing experimental evidence for the degenerate ferroelastic ground states theoretically predicted. Non-centrosymmetric SnSe, as the first layered multiferroic at room temperature, provides a novel platform not only to explore the interactions between elementary excitations with controlled symmetries, but also to efficiently tune the device performance via external electric and mechanical stress.

Chen, Rui [University of California, Berkeley, CA ↗
DOE OSTI2020

Thermodynamic evidence for a two-component superconducting order parameter in Sr 2 RuO 4

Sr 2 RuO 4 has stood as the leading candidate for a spin-triplet superconductor for 26 years. However, recent NMR experiments have cast doubt on this candidacy and it is difficult to find a theory of superconductivity that is consistent with all experiments. Here, the order parameter symmetry for this material therefore remains an open question. Symmetry-based experiments are needed that can rule out broad classes of possible superconducting order parameters. Here, we use resonant ultrasound spectroscopy to measure the entire symmetry-resolved elastic tensor of Sr 2 RuO 4 through the superconducting transition. We observe a thermodynamic discontinuity in the shear elastic modulus c 66 , which implies that the superconducting order parameter has two components. A two-component p-wave order parameter, such as p x + ip y , naturally satisfies this requirement. As this order parameter appears to have been precluded by recent NMR experiments, we suggest that two other two-component order parameters, namely {d xz ,d yz } and {d x 2 –y 2 ,g xy (x 2 –y 2 ) }, are now the prime candidates for the order parameter of Sr 2 RuO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pushing the limits of the electrochemical window with pulse radiolysis in chloroform

Pulse radiolysis (PR) enables the full redox window of a solvent to be accessed, as it does not require electrodes or electrolyte which limit the potentials accessible in voltammetry measurements. PR in chloroform has the additional possibility to enable reaching highly positive potentials because of its large ionization potential (IP). We report PR experiments demonstrated the formation of the (deuterated) chloroform radical cation CDCl 3 + ˙, identifying it as the source of the broad absorption in the visible part of the spectrum. Results indicated that solutes with a redox potential up to +3.7 V vs. Fc/Fc + can be oxidized by CDCl 3 + ˙, which is far beyond what is possible with electrochemical techniques. Oxidation is not efficient because of rapid geminate recombination with chloride counterions, but also due to rapid decomposition of CDCl 3 + ˙ which limits the yield of otherwise longer-lived free ions. The rapid, 6 ± 3 ns, decomposition, confirmed by two independent experiments, means that a solute must be present at a concentration >100 mM to capture >90% of the free holes formed. Addition of ethene removes the broad, overlapping absorptions from ubiquitous (chlorine atom, solute) complexes created by PR in halogenated solvents enabling clear observation of solute cations. The results also unravel the complex radiation chemistry of chloroform including the large reported value G (–CHCl 3 ) = 12 molecules/100 eV for the decomposition of chloroform molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrafast pre-solvated dodecane hole capture and subsequent damage of used nuclear fuel extraction ligands DEHBA, DEH i BA, HONTA, CMPO, HEH[EHP] and TBP

Here, two classes of used nuclear fuel (UNF) extraction ligands, amide (DEHBA, DEH i BA, HONTA) and organophosphorus (CMPO, HEH[EHP], TBP), were selected to study radiation induced damage at picosecond to nanosecond timescale using electron pulse radiolysis in n-dodecane (DD) and supported by quantum chemical calculations. Spectra after radiolysis of 200 mM extraction ligands were recorded in DD/0.3 M DCM. Absorption peaks at 365, 365, 400 and 387 nm in case of DEHBA, DEH i BA, HONTA and CMPO respectively are assigned to triplet excited states. Additional absorption peaks at 420, 460 and 600 nm of DEHBA, DEH i BA and HONTA respectively were identified as due to ligand radical cations. A concentration dependent absorption peak at 600 nm in the case of CMPO was observed and assigned due to a combination of CMPO˙ + , (CMPO) 2 ˙ + and possibly a radical degradation product of CMPO. Weak absorption peaks at 650 and 550 nm in case of HEH[EHP] and TBP were observed and tentatively assigned to their radical cations. A two-component DD˙ + decay in the presence of ligands was observed due to different ligand oxidation mechanisms: ultrafast capture of pre-solvated DD holes and diffusive capture of solvated DD holes. At high extraction ligand concentrations (>100 mM), the majority of DD holes were captured via the ultrafast pre-solvated pathway in <10 ps with C 37 values of 389, 401, 270, 374, 458 and 340 mM for DEHBA, DEHiBA, HONTA, CMPO, HEH[EHP] and TBP respectively. Following ultrafast capture, the remainder of DD holes became solvated and were captured with k = (2.32 ± 0.13), (1.78 ± 0.12), (1.38 ± 0.2), (0.98 ± 0.081), (1.09 ± 0.08) and (1.77 ± 0.046) × 10 10 for DEHBA, DEH i BA, HONTA, CMPO, HEH[EHP] and TBP respectively. Subsequent hole transfer from the extraction ligands˙ + to the low IP solute tri-p-tolylamine (TTA) showed only 4–16% hole transfer, most likely indicating ligand˙ + degradation in 0.9–4.6 ns.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Small-x structure of oxygen and neon isotopes as seen by the Large Hadron Collider

Results on collisions of O-16 nuclei performed at the Relativistic Heavy Ion Collider (RHIC) have been presented for the first time at Quark Matter 2023 by the STAR collaboration. O-16+O-16 collisions are also expected to take place in the near future at the Large Hadron Collider (LHC) at much higher beam energies. We explore the potential of beam-energy-dependent studies for this system to probe small-x dynamics and QCD evolution. We perform 3+1D IP-Glasma simulations to predict the rapidity dependence of the initial geometry of light-ion collisions, focusing on O-16+O-16 and Ne-20+Ne-20 collisions at root s(NN) = 70 GeV and 7 TeV. The choice of Ne-20 is motivated by its strongly elongated geometry, which may respond differently to the effect of the high-energy evolution compared to the more spherical O-16. We find that smearing induced by soft gluon production at high energy causes mild variations in the initial-state eccentricities as a function of the collision energy. These effects could be resolved in future experiments and deserve further investigation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Characterization of Agfa Structurix series D4 and D3sc x-ray films in the 0.7–4.6 keV energy range

X-ray films remain a key asset for high-resolution x-ray spectral imaging in high-energy-density experiments conducted at the National Ignition Facility (NIF). The soft x-ray Opacity Spectrometer (OpSpec) fielded at the NIF has an elliptically shaped crystal design that measures x rays in the 900–2100 eV range and currently uses an image plate as the detecting medium. However, Agfa D4 and D3sc x-ray films’ higher spatial resolution provides increased spectral resolution to the data over the IP-TR image plates, driving the desire for regular use of x-ray film as a detecting medium. The calibration of Agfa D4 x-ray film for use in the OpSpec is communicated here. These calibration efforts are vital to the accuracy of the NIF opacity measurements and are conducted in a previously un-studied x-ray energy range under a new film development protocol required by NIF. The absolute response of Agfa D4 x-ray film from 705 to 4620 eV has been measured using the Nevada National Security Site Manson x-ray source. A broader range of energies was selected to compare results with previously published data. The measurements were taken using selected anodes, filters, and applied voltages to produce well-defined energy lines.

Dutra, E. C. (ORCID:0000000167649195)↗
DOE OSTI2023

Time dependent model for non-inductive ECH X-I current ramp-up for SHPD tokamak facility

Non-inductive (NI) plasma current start-up and ramp-up is an important research topic for spherical tokamak (ST) based reactors and fusion pilot plant (FPP). For a compact FPP, the OH flux availability is highly restricted due to its compact geometry. Efficient fundamental extraordinary mode (X-I) electron cyclotron heating (ECH) current start-up and ramp-up regime was identified for a reactor-like high toroidal magnetic field range which has more than a hundred times higher current drive efficiency compared to more conventional ECH methods for the relevant start-up temperature range. High current drive efficiency is possible due to the strong X-I fundamental ECH interaction only with unidirectional passing electrons constrained by the wave accessibility conditions. Here, we extend the X-I electron cyclotron current drive (ECCD) investigation to a time dependent model to simulate the non-inductive current ramp-up to 10 MA for the Sustained High-Power Density (SHPD) facility. As the X-I ECCD driven current I EC rises, due to the back EMF driven negative current, the net plasma current Ip rises more slowly with the current resistive time scale. For tokamak confinement time (both L-mode and H-Mode) which tends to rise with I p , a positive feedback results and even with constant applied ECH power, T e0 , I EC , and I p can continue to rise to very high values. However, in a realistic situation, the T e0 rise should saturate due to a number of factors such as enhanced core radiation and increased power loss at high temperature. To simulate this effect, we adopt a maximum T e0 model which would limit the temperature rise to certain T e0 . With this model, we investigated the current ramp-up for various ECH power levels and the maximum T e0 of 15, 20, and 25 keV. We find that while the power required is reduced with increasing T e0 limit due to increased current drive efficiency, the time to reach 10 MA tends to go up due to the reduced plasma resistivity for the higher T e0 limit. We also find for a given Te0 limit, the time to reach 10 MA tends to be reduced by increasing the applied ECH power by over driving the current ramp-up where I EC is driven at significantly higher level than 10 MA. While the current ramp-up time may not be an issue for the steady-state reactor systems, if it is desirable to minimize the current ramp-up time, it is prudent to have a sufficient ECH power for current over-drive and have some T e0 limiting tools such as impurity seeding for enhanced radiation. In conclusion, a well-controlled NI ECH start-up also has a potential of improving the tokamak start-up reliability and avoid run-away electrons while the NI off-axis current drive could enhance MHD stability and plasma performance improvements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A comparison of QTP functionals against coupled-cluster methods for EAs of small organic molecules

EA-EOM-CCSD electron affinities and LUMO energies of various Kohn–Sham density functional theory (DFT) methods are calculated for an a priori IP benchmark set of 64 small, closed-shell molecules. The purpose of these calculations was to investigate whether the QTP KS-DFT functionals can emulate EA-EOM-CC with only a mean-field approximation. We show that the accuracy of DFT—relative to CCSD—improves significantly when elements of correlated orbital theory are introduced into the parameterization to define the QTP family of functionals. In particular, QTP(02), which has only a single range separation parameter, provides results accurate to a MAD of <0.15 eV for the whole set of 64 molecules compared to EA-EOM-CCSD, far exceeding the results from the non-QTP family of density functionals.

Chemistry↗
DOE OSTI2024

Simulating energetic ions and enhanced fusion rates from ion-cyclotron resonance heating with a full-wave/Fokker–Planck model

Reproducing fast-ion enhanced fusion rates from ion-cyclotron resonance heating (ICRH) in tokamaks requires the self-consistent coupling of a full-wave solver and a Fokker–Planck solver, which evolves multiple simultaneously resonant ion species. We introduce a new self-consistent model that iterates the TORIC full-wave solver with the CQL3D Fokker–Planck solver using the integrated plasma simulator (IPS). This model evolves the bounce-averaged ion distribution functions in both parallel and perpendicular velocity-space with a quasilinear radio frequency (RF) diffusion operator valid in the ion finite Larmor radius (FLR) limit and the RF electric fields with the resultant non-Maxwellian FLR dielectric tensor. This produces non-Maxwellian ICRH simulations that are fully self-consistent, fast, and interoperable with integrated modeling frameworks, such as TRANSP/GACODE/IPS-FASTRAN. We demonstrate our model's capabilities by validating it against experimental data in Alcator C-Mod. We then perform the first RF heating simulations of SPARC using self-consistent non-Maxwellian ion distributions to investigate the potential to enhance fusion rates using ion cyclotron resonance heating generated fast ions.

Physics↗
DOE OSTI2024

Availability of Critical Benchmark Experiments for the Pebble Tanker Transportation Model for Nuclear Criticality Safety Validation of TRISO Pebbles

This study addresses the need for comprehensive investigations into TRi-structural ISOtropic (TRISO) fuel pebble transportation validation. In this work, an exploratory model, the pebble tanker(PT), was developed with the aim of facilitating the validation of nuclear criticality safety calculations in the context of industrial-scale transportation of TRISO fuel. The PT model was designed to investigate the availability and applicability of critical benchmark experiments crucial for assessing the transportation of these pebbles. This work incorporated sensitivity/uncertainty (S/U) similarity studies to quantify the applicability of critical benchmark experiments and to address nuclear data uncertainties in the context of TRISO transportation. Two container models were investigated: one for the Hermes-type pebble and one for the Pebble Bed Modular Reactor (PBMR)–type pebble. The models were simplified, considering fuel, containment, and either water or air, to enable a focus on the underlying physics of applications involving TRISO fuel pebbles using the PT model. A crucial aspect under consideration was the capacity of the transport package to hold pebbles while ensuring subcriticality in the flooded state. An approach in the criticality validation process involves assessing the similarity between systems through an integral index parameter evaluation. This involves calculating a correlation coefficient (referred to as c k ) based on shared nuclear data–induced uncertainty between a benchmark experiment and the application of the PT model. To facilitate this analysis, the SCALE tools, particularly the CSAS6-Shift, TSUNAMI-3D-Shift, and TSUNAMI-IP sequences, were employed for comprehensive studies in neutronics and S/U analysis. Our findings showed that there are sufficient critical experimental benchmarks to perform this validation of the PT model in the most reactive state, i.e. when the tanker is flooded. This paper provides valuable insights into validating a transport package for Generation IV TRISO fuel pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Cryogenic and Temperature-Dependent Photoelectron Spectroscopy of Metal Complexes

Negative ion photoelectron spectroscopy (NIPES) coupled with electrospray ionization (ESI) has been proved to be a powerful gas-phase spectroscopic tool for characterizing electronic structures and chemical bonding of a variety of cluster anions and corresponding neutral radicals involved in the condensed phase reactions and transformations. Since the acquisition of cryogenic and temperature-controlling capabilities, broader range of research scope has been covered. This review summarizes our recent investigations on metal complexes employing cryogenic ESI-NIPES that provide us essential information towards understanding complicated condensed phase reactions including hydrocarbon activations and electron transfer reactions, and afford us spectroscopic probe of highly reactive transient species and intimate redox pairs. Special attention has been drawn to connect gas phase photodetachment processes with solution phase redox reactions. Photodetachment of transition metal-EDTA complexes has been systematically investigated to model the sequential oxidation reactions of these species in solutions. The obtained gas phase electron affinity (EA) is compared with the solution redox potential (E1/2) and the metal ionization potential (IP) for several series of homologous metal complexes to emphasize their intrinsic correlations with deviations being largely modulated by different degrees of ligand participations.

Yuan, Qinqin↗
DOE OSTI2021

The High Luminosity LHC interaction region magnets towards series production

The High Luminosity Large Hadron Collider (HL-LHC) is the new flagship project of CERN. First endorsed in 2013 and approved in 2016, HL-LHC is an upgrade of the accelerator aiming to increase by a factor of ten the statistics of the LHC collisions at the horizon of 2035-2040. HL-LHC relies on cutting edge technologies: among them, large aperture superconducting magnets will replace the present hardware to allow a smaller beam size in two interaction points (IPs). The project involves the construction of about 150 magnets of six different types: the quadrupole triplet, two main dipoles and three orbit correctors. The triplet, manufactured at CERN and in the USA, will consist of 30 magnets based on Nb3Sn technology, with an operational peak field of 11.4 T. These will be the first quadrupole Nb3Sn magnets installed in a particle accelerator. The other five types of magnets, all relying on Nb-Ti technology, present non-trivial challenges in the design and construction; they will be manufactured as part of in-kind contribution under the responsibility of institutes in Japan, China, Spain, and Italy. The project is now in the phase of transition between qualification through short models and prototypes and the beginning of the series construction. In this paper we review the magnet requirements, the reasons for selecting the design, the technological challenges with respect to previous projects, and we summarize the steps that have been taken to validate the baseline.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗