Search NASA⌕ Search

SEARCH · Search NASA

Results for “ISOBAR MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Using density functional theory to construct multiphase equations of state: tin as an example

We present a general methodology for using density functional theory (DFT) calculations as a basis for constructing multiphase equations of state (EOS). Focusing on tin as an example, we discuss the full process of generating a tabular EOS, starting from first-principles calculations and arriving at a full EOS in agreement with existing experimental data. We begin by describing DFT calculations for the five solid phases and liquid phase of tin, including cold curve, phonon, and DFT-based molecular dynamics calculations. We then discuss methods for incorporating DFT results into materials models used in OpenSesame, the program used to create a full tabular multiphase EOS. Next, we outline a general strategy for adjusting model parameters in OpenSesame to fit to a variety of experimental data, including isobaric data, isothermal data, shock data, solid-solid phase boundary measurements, and measurements of the melt curve. We end with a discussion of the advantages of using DFT data as a foundation for EOS generation and discuss potential strategies for automated EOS generation based on the fitting process highlighted in this work.

74 ATOMIC AND MOLECULAR PHYSICS↗

A kinetic energy analysis of the meso beta-scale severe storm environment

Analyses are performed of the meso beta-scale (20-200 km wavelengths and several hours to one-day periods) severe storm kinetic energy balance on the fifth day of the AVE SESAME campaign of May 1979. A 24-hr interval covering the antecedent, active and post-convective outbreak activity over Oklahoma are considered. Use is made of the kinetic energy budget equation (KEBE) for a finite volume in an isobaric coordinate system. Rawindsonde data with 75 km resolution were treated. The KEBE model covered changes in kinetic energy due to the cross contour flows, horizontal and vertical components of flux divergence, and volumic mass changes on synoptic and subsynoptic scales. The greatest variability was concentrated above 400 mb height and over the most intense storm activity. Energy was generated at the highest rates in divergence and decreased the most in convection. The meso beta-scale lacked sufficient resolution for analyzing mesoscale activity.

Fuelberg, H. E.↗

H2OI95: A Stand-Alone Fortran Code for Evaluating the IAPWS-95 Equation-of-State Model for Water (Rev. 1)

H2OI95 is a stand-alone Fortran code for evaluating the IAPWS-95 equation-of-state model for the thermodynamic properties of water. It also evaluates the corresponding thermochemical properties of water consistent with the CODATA recommendations. The IAPWS-95 model is based on a model equation for the dimensionless Helmholtz energy for which the primary variables are the inverse reduced temperature (τ = T cr /T ) and reduced density (δ = ρ/ρ cr ). Here T is the absolute temperature (K), ρ is density (kg/m³), and the subscript “ cr ” refers to the critical point of water (647.096 K and 22.064 MPa pressure in this model, for which ρ cr is 322 kg/m³). The code solves four basic types of problems, distinguished by the specified inputs: 1. Temperature (K) and density (ρ kg/m³) or reduced density (δ) 2. Temperature (K) and pressure (MPa). 3. Temperature (K) on the saturation (liquid-vapor equilibrium) curve 4. Pressure (MPa) on the saturation curve. Each type of problem is run using a corresponding input (text) file. All but the first type of problem require iteration. For example, to solve for desired temperature and pressure, the reduced density must be adjusted to give the desired pressure. Iteration is accomplished using the Newton-Raphson method, though the secant method is also used in solving the fourth type of problem. For the last three types of problems, H2OI95 has been used to conduct numerical studies of convergence and the problem of multiple numerical solutions, some of which are not physically valid. Obtaining valid results depends mainly on appropriate choice of starting values for the density. The default values used in H2OI95 appear to consistently lead to generally desired results. With modification (not addressed here), H2OI95 can be used to support SUPCRT92 and similar codes that compute chemical thermodynamic properties of species and reactions over a wide range of temperature and pressure (273.16-1273K and 0-1000 MPa). Version 1.1 of this software calculates an extended set of water properties, including some derivable solely from IAPWS-95, such as the isobaric thermal expansivity and the isothermal compressibility, and still other properties based on supplementary models sanctioned by IAPWS, including the dynamic viscosity, thermal conductivity, surface tension, and static dielectric constant, and various other properties (notably Debye-Hückel parameters) derivable from the dielectric constant and its partial derivatives with respect to temperature and pressure. A coding error in Version 1.0 was identified while testing the implementation of the viscosity model. This error is described in Appendix C. It mainly affects calculation of “higher order” properties such as compressibility and heat capacity near the critical point.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

T=3/2 states in {sup 13}C

Background: Experimental information on the structure of low-lying levels with isospin 3/2 in systems with 13 nucleons can be used to evaluate the quality of modern theoretical predictions for the light exotic systems. This level structure is poorly known at present. Purpose: Search for T=3/2 states in {sup 13}C was performed in this work. Method: These states were observed in the resonance elastic scattering of radioactive beam {sup 12}B on protons using the thick target inverse kinematics technique. Results: Six new states in {sup 13}C were identified as T=3/2 states. Tentative spin-parity assignments are suggested. Comparison to the previous knowledge of the level structure of T=3/2 A=13 system and to shell-model predictions is given. Conclusion: The elastic scattering of neutron-rich beams on proton target is a convenient tool for isobaric analog states search. The observed {sup 12}B+p excitation function is determined by the T=3/2 states and no features associated with T=1/2 states were found. Although the level scheme of T=3/2 states in A=13 systems is still far from being complete the emerging picture shows significant disagreements with predictions of contemporary shell models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Atomistic description for temperature-driven phase transitions in BaTiO 3

Barium titanate (BaTiO 3 ) is a prototypical ferroelectric perovskite that undergoes the rhombohedral-orthorhombic-tetragonal-cubic phase transitions as the temperature increases. In this paper, we develop a classical interatomic potential for BaTiO 3 within the framework of the bond-valence theory. The force field is parametrized from first-principles results, enabling accurate large-scale molecular dynamics (MD) simulations at finite temperatures. Overall, our model potential for BaTiO 3 reproduces the temperature-driven phase transitions in isobaric-isothermal ensemble (NPT) MD simulations. This potential allows for the analysis of BaTiO 3 structures with atomic resolution. By analyzing the local displacements of Ti atoms, we demonstrate that the phase transitions of BaTiO 3 exhibit a mix of order-disorder and displacive characters. Besides, from a detailed observation of structural dynamics during phase transition, we discover that the global phase transition is associated with changes in the equilibrium value and fluctuations of each polarization component, including the ones already averaging to zero, Contrary to the conventional understanding that temperature increase generally causes bond-softening transition, the x-polarization component (the one which is polar in both the orthorhombic and the tetragonal phases) exhibits a bond-hardening character during the orthorhombic-to-tetragonal transition. These results provide further insight about the temperature-driven phase transitions in BaTiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

'Coulomb' description of basic relaxation parameters of isobar analog and charge-exchange giant monopole resonances

Within a semimicroscopic approach, basic relaxation parameters of the isobaric analog resonance and of the charge-exchange giant monopole resonance, which is an overtone of the isobaric analog resonance, are interpreted in terms of the mean Coulomb field of a nucleus. The continuum version of the random-phase approximation, allowance for an approximate isospin conservation in nuclei in an explicit form, and a phenomenological description of the fragmentation effect are basic ingredients of the approach used. The aforementioned parameters were calculated for a number of magic and near-magic nuclei by using a partly self-consistent phenomenological nuclear mean field and the isovector part of the Landau-Migdal interaction in the particle-hole channel. The results of the calculations are compared with corresponding experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

VTOL in-ground effect flows for closely spaced jets

The interaction of two vertically impinging incompressible jets is studied through the invention of physical flow models that approximate the behavior of colliding wall jets as the incident jets are brought closer together. The mechanism for upwash formation is studied and momentum models for the upwash sheet are postulated. An approximate method for computing the ground isobar pattern of jet and upwash deflection zones is presented and compared with test data. A method for computing the upwash impingement force in the absence of secondary induced flow effects is also presented and reasonably good agreement is achieved with experimental data for cylindrical fuselage shapes of circular and rectangular cross section.

Siclari, M. J.↗

Formulation, Implementation and Validation of a 1D Boundary Layer Inflow Scheme for the QUIC Modeling System

Recent studies have highlighted the importance of accurate meteorological conditions for urban transport and dispersion calculations. In this work, we present a novel scheme to compute the meteorological input in the Quick Urban & Industrial Complex () diagnostic urban wind solver to improve the characterization of upstream wind veer and shear in the Atmospheric Boundary Layer (ABL). The new formulation is based on a coupled set of Ordinary Differential Equations (ODEs) derived from the Reynolds Averaged Navier–Stokes (RANS) equations, and is fast to compute. Building upon recent progress in modeling the idealized ABL, we include effects from surface roughness, turbulent stress, Coriolis force, buoyancy and baroclinicity. We verify the performance of the new scheme with canonical Large Eddy Simulation (LES) tests with the GPU-accelerated FastEddy"Equation missing" solver in neutral, stable, unstable and baroclinic conditions with different surface roughness. Furthermore, we evaluate QUIC calculations with and without the new inflow scheme with real data from the Urban Threat Dispersion (UTD) field experiment, which includes Lidar-based wind measurements as well as concentration observations from multiple outdoor releases of a non-reactive tracer in downtown New York City. Compared to previous inflow capabilities that were limited to a constant wind direction with height, we show that the new scheme can model wind veer in the ABL and enhance the prediction of the surface cross-isobaric angle, improving evaluation statistics of simulated concentrations paired in time and space with UTD measurements.

54 ENVIRONMENTAL SCIENCES↗

VTOL in ground effect flows for closely spaced jets

Results of a series of in ground effect twin jet tests are presented along with flow models for closely spaced jets to help predict pressure and upwash forces on simulated aircraft surfaces. The isolated twin jet tests revealed unstable fountains over a range of spacings and jet heights, regions of below ambient pressure on the ground, and negative pressure differential in the upwash flow field. A separate computer code was developed for vertically oriented, incompressible jets. This model more accurately reflects fountain behavior without fully formed wall jets, and adequately predicts ground isobars, upwash dynamic pressure decay, and fountain lift force variation with height above ground.

Migdal, D.↗

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlations of baryon and charge stopping in heavy ion collisions*

Baryon numbers are theorized to be carried by valence quarks in the standard QCD picture of the baryon structure. Another theory proposed an alternative baryon number carrier, a non-perturbative Y-shaped configuration of the gluon field, called the baryon junction in the 1970s. However, neither of these theories has been verified experimentally. Recently, searching for the baryon junction by investigating the correlation of net-charge and net-baryon yields at midrapidity in heavy-ion collisions has been suggested. Here, this paper presents studies of such correlations in collisions of various heavy ions from oxygen to uranium with the UrQMD Monte Carlo model. The UrQMD model implements valence quark transport as the primary means of charge and baryon stopping at midrapidity. Detailed studies are also conducted for isobaric $_{40}^{96}{\rm{Zr}}$ + $_{40}^{96}{\rm{Zr}}$ and $_{44}^{96}{\rm{Ru}}$ + $_{44}^{96}{\rm{Ru}}$ collisions. We found a universal trend of charge stopping with respect to baryon stopping and discovered that the charge stopping is always greater than the baryon stopping. This study provides a model baseline in valence quark transport for what is expected in net-charge and net-baryon yields at the midrapidity of relativistic heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of the neutron-skin effect on nuclear isobar collisions at energies available at the BNL Relativistic Heavy Ion Collider

The unambiguous observation of a Chiral Magnetic Effect (CME)-driven charge separation is the core aim of the isobar program at RHIC consisting of $96\atop{40}$Zr+$96\atop{40}$Zr and $96\atop{44}$Ru+$96\atop{44}$Ru collisions at √s NN = 200 GeV. We quantify the role of the spatial distributions of the nucleons in the isobars on both eccentricity and magnetic field strength within a relativistic hadronic transport approach (SMASH, Simulating Many Accelerated Strongly-interacting Hadrons). In particular, we introduce isospin-dependent nucleon-nucleon spatial correlations in the geometric description of both nuclei, deformation for $96\atop{44}$Ru and the so-called neutron skin effect for the neutron-rich isobar i.e. $96\atop{40}$Zr. The main result of this study is a reduction of the magnetic field strength difference between $96\atop{44}$Ru+$96\atop{44}$Ru and $96\atop{40}$Zr+$96\atop{40}$Zr by a factor of 2, from 10% to 5% in peripheral collisions when the neutron-skin effect is included. Further, we find an increase of the eccentricity ratio between the isobars by up to 10% in ultra-central collisions as due to the deformation of $96\atop{44}$Ru while neither the neutron skin effect nor the nucleon-nucleon correlations result into a significant modification of this observable with respect to the traditional Woods-Saxon modeling. Our results suggest a significantly smaller CME signal to background ratio for the experimental charge separation measurement in peripheral collisions with the isobar systems than previously expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermodynamic properties of metaschoepite predicted from density functional perturbation theory

Density functional perturbation theory (DFPT) calculations of the thermodynamic properties of metaschoepite, (UO 2 ) 8 0 2 (OH) 12 •10H 2 0, are reported. Using a recently revised crystal structure of metaschoepite, the predicted molar entropy and isobaric heat capacity are overall significantly smaller than previous calculations using an earlier orthorhombic crystal structure model. The present DFPT calculations also show large differences between the thermo-dynamic functions of metaschoepite and schoepite, which might reflect the change in phonon properties upon removal of two H 2 0 molecules per formula unit and alteration of the H-bonded interlayer water network from schoepite to metaschoepite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure–Transport Relationships of Water–Organic Solvent Co-transport in Carbon Molecular Sieve (CMS) Membranes

We explore the effects of the carbon molecular sieve (CMS) microstructure on the separation performance and transport mechanism of water–organic mixtures. Specifically, we utilize PIM-1 dense films and integrally skinned asymmetric hollow fiber membranes as polymer precursors for the CMS materials. The PIM-1 membranes were pyrolyzed under several different pyrolysis atmospheres (argon, carbon dioxide, and diluted hydrogen gas) and at multiple pyrolysis temperatures. Detailed gas physisorption measurements reveal that membranes pyrolyzed under 4% H 2 and CO 2 had broadened ultramicropore distributions (pore diameter <7 Å) compared to Ar pyrolysis, and pyrolysis under CO 2 increased ultramicropore volume and broadened micropore distributions at increased pyrolysis temperatures. Gravimetric water and p-xylene sorption and diffusion measurements reveal that the PIM-1-derived CMS materials are more hydrophilic than other CMS materials that have been previously studied, which leads to sorption-diffusion estimations showing water-selective permeation. Water permeation in the vapor phase, pervaporation, and liquid-phase hydraulic permeation reveal that the isobaric permeation modes (vapor permeation and pervaporation) are reasonably well predicted by the sorption-diffusion model, whereas the hydraulic permeation mode is significantly underpredicted (>250×). Conversely, the permeation of p-xylene is well predicted by the sorption-diffusion model in all cases. The collection of pore size analysis, vapor sorption and diffusion, and permeation in different modalities creates a picture of a combined transport mechanism in which water–under high transmembrane pressures–permeates via a Poiseuille-style mechanism, whereas p-xylene solutes in the mixture permeate via sorption-diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring a possible origin of the QCD critical endpoint

We develop a new model of the QCD critical endpoint by matching the deconfinement phase transition line of quark-gluon bags with the similar line at which the bag surface tension coefficient vanishes. Unlike all previous studies of such models the deconfined phase in our approach is defined not by an essential singularity of the isobaric partition function but its simple pole. As an unexpected result we find out that the first-order phase transition which is usually defined by a discontinuity of the first derivative of the bag system pressure results from a discontinuity of the derivative of surface tension coefficient of quark-gluon bags.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the order-disorder transition of compressible diblock copolymer melts

We performed both the fast off-lattice Monte Carlo simulations of symmetric diblock copolymers (DBC) in an isothermal-isobaric ensemble and the self-consistent field calculations of asymmetric DBC to properly determine the order-disorder transition (ODT) of a model system of compressible DBC melts used in the literature when it is a first-order phase transition, and studied for the first time the co-existence of the two phases at ODT. We found that the co-existing region is quite small and decreases as the system becomes less compressible, which justifies the previous ODT results obtained by equating the Helmholtz free energy per chain of the two phases. We also found that for the most compressible system where there is no repulsion between the same type of segments, the self-consistent field theory predicts that ODT is a second-order phase transition even for asymmetric DBC melts due to its mean-field approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of experimental data with predictions of various models for silicon and aluminum fragmentation under the effect of high-energy cosmic rays

The accuracy attained in theoretically estimating the yields of isotopes and isobars and their energy, charge, and mass distributions in silicon fragmentation that occurs in spacecraft electronics under the effect of cosmic-ray protons is an important factor in forecasting the probability for single-event upsets in the electronics and the reliability of spacecraft operation in general. In previous studies of our group, it was shown that the results of the calculations are highly sensitive to the choice of parameters for opticalmodel potentials. In addition to cross sections for elastic and inelastic proton scattering and charge, mass, and energy distributions of heavy nuclear-reaction products, the results of our calculations for doubledifferential spectra of protons originating from the interaction of highly energetic (30-400 MeV) protons with aluminum and double-differential spectra of other particles (neutrons and alpha particles) arising in competing channels of the p + {sup 27}Al reaction are also described in the present article. The calculations in question were performed on the basis of the EMPIRE-II-19 code by using various optical-model potentials, including the Becchetti-Greenlees potential for the (p, n) channel, the Wilmore-Hodgson potential for the (p, n) channel, the Madland potential for the (p, p) channel, the Koning-Delaroche potential for the (p, p) channel, and the McFadden-Satchler potential for the (p, {alpha}) channel. A comparative analysis of the double-differential spectra obtained for outgoing protons, neutrons, and alpha particles experimentally and in the calculations of various authors was performed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗