Search NASA⌕ Search

SEARCH · Search NASA

Results for “In situ characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Detailed in situ ATR-FTIR spectroscopy study of the early stages of C-S-H formation during hydration of monoclinic C3S

The early stages of tricalcium silicate hydration has been studied by in situ ATR-FTIR spectroscopy. A method for data reduction based on background correction and subtraction of spectra of pure components is presented, which makes it possible to describe the kinetic evolution of the calcium silicate hydrate phase upon hydration with great detail. The results obtained are in full agreement with recently reported, detailed solid-state NMR spectroscopy measurements. As ATR-FTIR spectroscopy does not require any isotope enrichment in order to increase the signal intensities and is a widely available technique, we suggest that our study opens up an avenue towards detailed in situ characterization of hydrating cementitious systems and hydrating systems in general.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The role of the metal core in the performance of WO x inverse catalysts

In this study, metal-metal oxide inverse catalysts are valuable in diverse applications but selecting pairs is challenging. Here we investigate the role of metal cores (Pt, Ru, Rh, Pd, Ni) in the formation and dynamics of Brønsted acid sites on WO x overlayer on carbon. By in situ/ex situ characterizations, probe chemistry kinetics, and DFT calculations, we demonstrate that metals with varying work functions promote the WO x dispersion, enhancing the Brønsted acidity than the 3D crystallites on carbon at submonolayer coverages by tuning the oxidation state of WO x . The metal core impacts the water splitting and hydroxylation of WO x . Water splitting on Ru-WO x is thermodynamically favorable compared to Ni-WO x and increases the dehydration rate on the former, leading to an activity enhancement by increasing the H 2 pulsing frequency. This study provides insights into optimizing inverse catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhancement of low-temperature solid oxide fuel cell performance and durability via surface chemistry modification

The development of active cathodes is one of the most critical challenges to lowering the operating temperature for solid oxide fuel cells (SOFCs). Here, in this work, we demonstrated that by modifying the cathode surface chemistry at a relatively low temperature, the cathode activity and durability can be simultaneously enhanced on high-performing, low-temperature cathodes such as (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF) and Sr 0.5 Sm 0.5 CoO 3-δ (SSC). This low-temperature modification using multi-valent cations activates the highly defected surface and maintains the nanoscale electrocatalysts by bypassing the high-temperature sintering procedure for SOFC fabrication. The modified cathode at 600°C shows an order of magnitude reduction in impedance to only 0.05 Ωcm 2 with a peak power density of 1.1 W/cm 2 and increases stability over 2000 h. The combination of in situ characterization, distribution of relaxation time analysis on impedance spectroscopy, and surface chemistry analysis reveals the importance of surface chemistry control on the gas-solid reaction activity and durability and provides the design principle for numerous future solid oxide cells.

25 ENERGY STORAGE↗
DOE OSTI2023

Measurements of sound propagation in Mars' lower atmosphere

Acoustics has become extraterrestrial and Mars provides a new natural laboratory for testing sound propagation models compared to those ones on Earth. Owing to the unique combination of a microphone and two sound sources, the Ingenuity helicopter and the SuperCam laser-induced sparks, the Mars 2020 Perseverance rover payload enables the in situ characterization of unique sound propagation properties of the low-pressure CO 2 -dominated Mars atmosphere. In this study, we show that atmospheric turbulence is responsible for a large variability in the sound amplitudes from laser-induced sparks. This variability follows the diurnal pattern of turbulence. In addition, acoustic measurements acquired over one Martian year reveal a variation of the sound intensity by a factor of 1.8 from a constant source due to the seasonal cycle of pressure and temperature that significantly modifies the acoustic impedance and shock-wave formation. Finally, we show that the evolution of the Ingenuity tones and laser spark amplitudes with distance is consistent with one of the existing sound absorption models, which is a key parameter for numerical simulations applied to geophysical experiments on CO 2 -rich atmospheres. Overall, these results demonstrate the potential of sound propagation to interrogate the Mars environment and will therefore help in the design of future acoustic-based experiments for Mars or other planetary atmospheres such as Venus and Titan.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Surface Conversion of Single-Crystal Bi 2 Se 3 to β-In 2 Se 3

In this work, we demonstrate that the surface layers of single-crystal layered-2D Bi 2 Se 3 can be converted to layered-2D rhombohedral ß-In 2 Se 3 by annealing under a trimethylindium (TMIn) flux. Samples were prepared in a metalorganic chemical vapor deposition (MOCVD) chamber, then transferred under vacuum to a surface analysis chamber for analysis with low-energy electron diffraction (LEED) and Auger electron spectroscopy. Additional ex situ characterization included x-ray diffraction, transmission-electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) elemental mapping, and Raman spectroscopy. The resulting single-crystal ß-In 2 Se 3 adopts the rhombohedral crystal structure (space group R-3m) and orientation of the underlying Bi 2 Se 3 , and the excess Bi atoms generated by this process create an underlying region of Bi-rich Bi x Se y . Due to the difference in bandgap between Bi 2 Se 3 and In 2 Se 3 , this conversion reaction presents a pathway to lateral heterojunctions if only selected regions are converted by masking the surface to spatially define the TMIn exposure. The conversion may also have implications for heteroepitaxy, because the in-plane lattice constants of Bi 2 Se 3 and In 2 Se 3 (0001) surfaces match those of InP and GaAs (111), respectively, and the natural cleavage planes of a layered-2D crystal facilitate substrate removal and reuse.

14 SOLAR ENERGY↗
DOE OSTI2023

Challenges and opportunities in plasma-activated reactions of CO 2 with light alkanes

We present upgrading CO 2 with surplus light alkanes to value-added chemicals using one-step plasma-activated processes under mild conditions, where opportunities and challenges for improving product selectivity focus on understanding reaction pathways, decoupling and benchmarking plasma and catalyst roles in reactions, tuning catalyst structural and electronic properties under plasma activation, and developing in situ characterization techniques.

03 NATURAL GAS↗
DOE OSTI2022

Deformation and Fracture Behaviors of Cylindrical Battery Shell During Thermal Runaway

Thermal runaway is one of the catastrophic failure modes of lithium-ion cells. During thermal runaway in cylindrical cells, sidewall shell rupture has been identified as a contributing factor for thermal runaway propagation in battery packs. Herein, the deformation and fracture behaviors of the battery shell during thermal runaway are investigated based on in-situ and ex-situ characterization as well as physics-based modeling. The deformation and fracture modes of the battery shell with/without Carbon Fiber Reinforced Polymer (CFRP) sleeves are identified. In the simulation, the strain introduced by thermal expansion of the system is considered, as well as the thermal and strain rate effects on the plastic stage. The final cell shell modeling is validated by cell thermal runaway tests. Results reveal the quantitative relation between shell deformation behaviors and the pressure and temperature distribution. Both the experiment and model demonstrate the effectiveness of adding a tight-fitting CFRP sleeve around the cell in limiting the side-wall rupture of the shell. The use of CFRP tubes introduces a novel phenomenon in the context of uneven temperature distribution. Results shed light on the mechanistic analysis of a cell side-wall rupture during thermal runaway and provide essential guidance for the next-generation safe battery design.

battery casing↗
DOE OSTI2024

High-entropy Li-rich layered oxide cathode for Li-ion batteries

High-entropy oxides (HEOs) are emerging as promising cathode materials for Li-ion batteries (LIBs) due to their stable solid-state phase and compositional flexibility. Herein, we investigate the structural and electrochemical properties of a novel non-equimolar high-entropy cathode material, termed high-entropy Li-rich layered oxide (HE-LLO, Li 1.15 Na 0.05 Ni 0.19 Mn 0.56 Fe 0.02 Mg 0.02 Al 0.02 O 1.97 F 0.03 ), in comparison to a pristine Li-rich layered oxide (PR-LLO, Li1.2Ni0.2Mn0.6O2). The incorporation of multiple cations (Na + , Al 3+ , Mg 2+ , Fe 3+ ) and anion (F - ) into HE-LLO introduces compositional diversity, enhancing structural stability through the entropy stabilization effect. Theoretical calculations confirm a significantly higher configurational entropy in HE-LLO compared to PRLLO, supporting its high-entropy nature. Electrochemical evaluations demonstrate that HE-LLO exhibits considerable capacity retention, preserving 76.8 % of its discharge capacity at 0.5C after 200 cycles, compared to only 36.2 % for PR-LLO. Even under high-temperature conditions, HE-LLO outperformed PR-LLO, maintaining 76.1 % of its discharge capacity after 100 cycles at 5C, while PR-LLO retained only 12.4 %. These enhancements are attributed to the improved phase reversibility and higher Li + ion diffusion coefficients of HE-LLO, validated by ex-situ characterizations using a synchrotron X-ray technique, along with density functional theory (DFT) calculations. In conclusion, these findings highlight the promise of non-equimolar HEOs as a novel design strategy for highperformance cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Additive manufacturing as a processing route for steel-aluminum bimetallic structures

Here we present results on the fabrication of steel-aluminum bi-metallic structures using directed energy deposition additive manufacturing. The challenges associated with the fabrication of a sharp transition from steel to aluminum are uncovered using ex-situ characterization techniques and thermo-mechanical modeling of the deposition process. It was found that the fabrication of a sharp steel-aluminum transition is challenging with extensive cracking observed at the interface. The cracking was attributed to the combined effect of residual stress development due to thermal expansion coefficient mismatch and the presence of ordered intermetallics with low ductility at the interface. Using a coupled thermodynamic and thermo-mechanical modeling approach, potential pathways to enable the fabrication of steel-aluminum bi-metallic structures using additive manufacturing are proposed. The results presented here can lay the foundation for future work on the fabrication of bi-metallic steel-aluminum structures using directed energy deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Targeted masking enables stable cycling of LiNi 0.6 Co 0.2 Mn 0.2 O 2 at 4.6V

Layered LiNi x Co y Mn 1–x-y O 2 (NCM, or NCMxy(1-x-y)) is a dominant family of cathode materials for lithium-ion batteries (LIBs) due to its high energy density. Among all NCM cathode materials, NCM622 possess the optimal energy density at high potential (≥ 4.6 V vs. Li/Li + ). However, the practical application of NCM622 at high voltage (≥ 4.6 V) is limited by its parasitic reactions and associated safety concerns. Completely physical isolation has been considered as the main approach to mitigate the parasitic reaction. It has also been previously demonstrated that the interface reaction has active site selectivity, and that the reactivity of the active sites can effectively suppressed by blocking the chemically active sites. Herein, a targeted masking by LiFePO 4 @C nanoplates is reported to unlock the stable performance of NCM622 up to 4.6 V vs. Li/Li + . The (targeted masked-NCM622)|graphite pouch cell shows 86.5% capacity retention after 1000 cycles and its maximum temperature during thermal runaway is dramatically reduced from 570 °C to 415 °C. Systematic in/ex situ characterizations, first-principles calculations and half/pouch targeted LiFePO 4 @C covers the surface of NCM partcell evaluation prove that PO 4 3- is preferentially adsorbed on transition metal sites, stabilizing both the transition metal ions and oxygen ions on the surface against the ethylene carbonate-containing traditional electrolyte even under high voltage (≥ 4.6 V vs. Li/Li + ). Furthermore, this work opens up new venue for rational design of high-performance cathode materials through a low-cost and scalable decoration process, and reveal a new understanding of interfacial activity of materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Inhibit the strain accumulation for 5V spinel cathode by mitigating the phase separation during high voltage stage

LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode is a potential cathode material for high-power, low-cost lithium-ion batteries (LIBs) due to its low raw material cost, high operating voltage and efficient lithium-ion transport channel. However, LNMO suffers from structural stability due to the two-phase-transformation during charge/discharge process, leading to poor cycling performance. Here, to address the issues, we have constructed a homogeneous aggregated LNMO cathode with a multifaceted primary particle, namely the LNMO with single-crystal secondary particles (SSP LNMO). Ex situ and in situ characterizations including the synchrotron X-ray diffraction, the neutron diffraction and full pouch cell validated that the SSP LNMO exhibit a single solid-solution reactions with a restrained lattice evolution during the delithiation/lithiation process. This is in contrast to the normal LNMO cathode, which demonstrates a significant two-phase transition from spinel Li 1-x Ni 0.5 Mn 1.5 O 4 to rock-salt MnO 2 at high voltage. Therefore, the SSP LNMO has greatly improved cycle life compared to the normal LNMO cathode. Overall, this study demonstrates the possibility of constructing LNMO based on primary-grain morphology modulation to improve the intrinsic stability of LIBs.

25 ENERGY STORAGE↗
DOE OSTI2026

In situ TEM annealing of neutron-irradiated Ti reveals a two-stage mechanism for elevated temperature radiation damage recovery

Understanding how irradiation-induced defects evolve at elevated temperatures is of critical importance to predicting materials' behavior under steady-state and accident scenarios. However, such mechanistic insight into microstructural evolution is limited by the nature of ex situ annealing and subsequent imaging. Here we show direct observation and quantification of defect recovery in neutron-irradiated Ti using in situ transmission electron microscopy (TEM) annealing experiments. In agreement with our prior work, and at temperatures below the irradiation temperature (T irr = 300 °C), dislocation loops are observed to glide. At elevated temperatures (>500 °C), dislocation lines become mobile and promote significant recovery of the microstructure. These mechanisms challenge the established electron irradiation-based model for radiation damage recovery, which originally suggests dissolution of static defect clusters, and demonstrates the importance of in situ characterization in understanding defect evolution in irradiated materials.

Hirst, Charles A. [Univ. of Michigan, Ann Arbor, M↗
DOE OSTI2023

Modulating the Extent of Anisotropic Cuprophilicity via High Pressure with Piezochromic Luminescence Sensitization

We report metallophilicity has been widely studied as a fundamental supramolecular interaction. However, the extent and directionality thereof remain controversial. A major obstacle lies in the difficulty to separately control the geometry and chemical composition. Herein, we address this challenge by modulating metallophilicity with mechanical pressure. Using a multinuclear Cu(I) complex as model system, we report anomalous anisotropies of (supra)molecular structures, vibrations, and interaction energies upon isotropic compression as well as concomitant (essentially turn-on) piezochromic luminescence enhancement with ~10 3 modulation. The in situ characterizations indicate opposite behaviors of contact distances and cuprophilic interactions for intermolecular vs intramolecular Cu-Cu pairs under pressure. Theoretical calculations break down the attractive and repulsive forces associated with cuprophilicity, its spontaneous 4p-3d hybridization origin, and direction-dependent interaction strength. The use of isotropic mechanical force reveals the intrinsic anisotropy of metallophilicity in multinuclear systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Effects of the First Atomic Layer on the Dynamic Behavior of Sub-2 nm MgO/Al 2 O 3 Memristors

As electronic devices continue to scale down from the current sub-5 nm range, atomic-scale control of defects becomes increasingly crucial to suppressing their impact on the physical properties of the devices. Memristors present an excellent example as a nonlinear and dynamic device with high speed and endurance required for electronic applications ranging from neuromorphic computing to nonvolatile memories. Herein we investigate the impact of atomic defects in sub-2 nm thick MgO/Al 2 O 3 atomic layer stack (ALS) memristors that use an M1 (switching layer)/M2 (oxygen vacancy reservoir layer) bilayer structure grown using in vacuo atomic layer deposition (iALD). Intriguingly, we revealed a direct correlation of the atomic defects in the M2 layer with the memristor dynamic behavior using a combined analysis of in situ scanning tunneling spectroscopy (iSTS) on the M2 layer and ex situ characterization on the memristors. Specifically, incomplete coverage of the 1st ALD atomic layer of M2 on the electrode yields defects at the M2/electrode interface. Despite the monotonic increase of ALD coverage, by almost three-fold from ~30% to >90%, at completion of the M2 layer of ~ 0.7 nm in thickness, the impact of the defects on the M2/electrode interface has been found detrimental to both memristor switching speed and endurance. Guided by atomistic simulation, we addressed the issue of interface defects via tuning of the Al surface hydroxylation to increase the first atomic layer ALD coverage to ~75%, leading to improved memristor switching speed and endurance by several orders of magnitude. In conclusion, these findings shed light on the correlation between the atomic defects and the dynamic behavior of sub-2 nm memristors and the importance of minimizing the atomic defects in memristors for future electronic applications.

Atomic Layer Deposition↗
DOE OSTI2025

Effect of Networking Density on the Patterning Performance of Molecular Layer Deposited Alucone Electron Beam/EUV Resists

One of the main barriers to continued device scaling in the era of extreme ultraviolet (EUV) lithography is the need for improved photoresist chemistries to address challenges such as poor EUV sensitivity, inadequate etch resistance, and pattern collapse. Metal-organic photoresists are a promising class of materials that can address many of these challenges, and among them, resists deposited via hybrid molecular layer deposition (MLD) have attracted interest for their unique advantages in thickness control, chemical homogeneity, and compatibility with vacuum processing. However, despite many successful demonstrations of patterning, little is known about how the molecular design of hybrid MLD resists affects their lithographic performance. In this work, we study the effect of the network structure, a common feature among all hybrid MLD resists, via a series of aluminum alkoxide ("alucone") negative tone resists with varying networking density. Their patterning mechanism is investigated via electron beam lithography (EBL)─a common proxy for EUV─and compared to their EUV-induced reactions studied via flood exposure and in situ characterization. In conclusion, we show that the resist with the least networking density demonstrates the best sensitivity and resolution, with the ability to resolve dense line/space gratings as small as 14 nm half pitch via EBL.

electron beam lithography↗
DOE OSTI2024

Nanoscale Control of Intrinsic Magnetic Topological Insulator MnBi 2 Te 4 Using Molecular Beam Epitaxy: Implications for Defect Control

Intrinsic magnetic topological insulators have emerged as a promising platform to study the interplay between the topological surface states and ferromagnetism. This unique interplay can give rise to a variety of exotic quantum phenomena, including the quantum anomalous Hall effect and axion insulating states. Here, in this study, utilizing molecular beam epitaxy (MBE), we present a comprehensive study of the growth of MnBi 2 Te 4 thin films on Si (111), epitaxial graphene, and highly ordered pyrolytic graphite substrates. By combining a suite of in situ characterization techniques, we obtain critical insights into the nanoscale control of MnBi 2 Te 4 epitaxial growth. First, we extract the free energy landscape for the epitaxial relationship as a function of the in-plane angular distribution. Then, by employing an optimized layer-by-layer growth, we determine the chemical potential and Dirac point of the thin film at different thicknesses and how this quantity is manifested by the dopant compensation from different antisite defects. Overall, these results establish a foundation for understanding the growth kinetics of MnBi 2 Te 4 and pave the way for future applications of MBE-grown thin films in emerging topological quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Correlating Oxidation State and Surface Area to Activity from Operando Studies of Copper CO Electroreduction Catalysts in a Gas-Fed Device

Copyright © 2020 American Chemical Society. The rational design of high-performance electrocatalysts requires a detailed understanding of dynamic changes in catalyst properties, including oxidation states, surface area, and morphology under realistic working conditions. Oxide-derived Cu catalysts exhibit a remarkable selectivity toward multicarbon products for the electrochemical CO reduction reaction (CORR), but the exact role of the oxide remains elusive for explaining the performance enhancements. Here, we used operando X-ray absorption spectroscopy (XAS) coupled with simultaneous measurements of the catalyst activity and selectivity by gas chromatography (GC) to study the relationship between oxidation states of Cu-based catalysts and the activity for ethylene (C2H4) production in a CO gas-fed cell. By utilizing a custom-built XAS cell, oxidation states of Cu catalysts can be probed in device-relevant settings and under high current densities (>80 mA cm-2) for the CORR. By employing an electrochemical oxidation process, we found that the Cu oxidation states and specific ion species do not correlate with C2H4 production. The difference in the CORR activity is also investigated in relation to electrochemical surface area (ECSA) changes. While the hydrogen evolution reaction (HER) activity is positively correlated to the ECSA changes, the increased C2H4 activity is not proportional to the ECSA. Ex situ characterization from microscopic techniques suggests that the changes in the C2H4 activity and selectivity may arise from a morphological transformation that evolves into a more active structure. These comprehensive results give rise to the development of a cell regeneration method that can restore the performance of the Cu catalyst without cell disassembly. Our study establishes a basis for the rational design of highly active electrocatalysts for broad-range reactions in a gas-fed device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrogenation of CO 2 to Methanol on a Au δ+ –In 2 O 3–x Catalyst

CO 2 hydrogenation to methanol has attracted increasing attention with the development of renewable hydrogen. A big challenge is to identify catalysts able to achieve high conversion and selectivity. In this work, we report an In 2 O 3 -supported Au catalyst that exhibits excellent performance for hydrogenation of CO 2 selectively to methanol. In situ characterizations using time-resolved X-ray diffraction, ambient-pressure X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy confirm that a strong metal–support interaction leads to a reactive Au δ+ –In 2 O 3– x interface for activation and hydrogenation of CO 2 to methanol. An effective gold-indium oxide bonding favors the dispersion of the noble metal and prevents its sintering under reaction conditions. The methanol selectivity reaches 100% at temperatures below 225 °C and is more than 70% at 275 °C over the Au δ+ –In 2 O 3– x catalyst. It is even 67.8% with a space time yield of methanol of 0.47 g MeOH /(h·g cat ) at 300 °C, 5 MPa, and 21,000 cm 3 h –1 g cat –1 . The results obtained here represent the highest selectivity and activity ever reported for CO 2 hydrogenation over supported gold catalysts. Our study shows that the strong Au/In 2 O 3 interaction and the intrinsic chemical activity of In 2 O 3 can be used to significantly improve the catalytic performance of Au catalysts, providing promising routes for the rational design and application of Au catalysts beyond CO 2 hydrogenation.

36 MATERIALS SCIENCE↗