Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inverse Multiplication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Atomically smooth and homogeneously N-polar AlN film grown on silicon by alumination of Si{sub 3}N{sub 4}

By using an alumination process of Si{sub 3}N{sub 4} at high temperature with aluminum flux irradiation for sufficient time, homogeneously N-polar and atomically smooth AlN film has been realized on silicon substrate with inversion domain suppressed to less than 3.0 Multiplication-Sign 10{sup 6} cm{sup -2} and root mean square surface roughness of {approx}0.4 nm. A general interface model is proposed to explain the mechanism of polarity determination. The sharp AlN(0001)/Si(111) interface exhibits 5:4 coincidence domain matching, resulting in an almost fully relaxed AlN film.

36 MATERIALS SCIENCE↗

Thermal production of ultrarelativistic right-handed neutrinos: complete leading-order results

The thermal production of relativistic right-handed Majorana neutrinos is of importance for models of thermal leptogenesis in the early Universe. Right-handed neutrinos can be produced both by 1↔2 decay or inverse decay and by 2 → 2 scattering processes. In a previous publication we have studied the production via 1↔2 (inverse) decay processes. There we have shown that multiple scattering mediated by soft gauge boson exchange also contributes to the production rate at leading order and gives a strong enhancement. Here we complete the leading order calculation by adding 2 → 2 scattering processes involving either electroweak gauge bosons or third-generation quarks. We find that processes with gauge interactions give the most important contributions. We also obtain a new sum rule for the Hard Thermal Loop resummed fermion propagator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

From eigenstate to Hamiltonian: Prospects for ergodicity and localization

Here, this paper addresses the so-called inverse problem which consists in searching for (possibly multiple) parent target Hamiltonian(s), given a single quantum state as input. Starting from ψ 0 , an eigenstate of a given local Hamiltonian Η 0 , we ask whether or not there exists another parent Hamiltonian Η P for ψ 0 , with the same local form as H 0 . Focusing on one-dimensional quantum disordered systems, we extend the recent results obtained for Bose-glass ground states [M. Dupont and N. Laflorencie, Phys. Rev. B 99, 020202(R) (2019)2469-995010.1103/PhysRevB.99.020202] to Anderson localization, and the many-body localization (MBL) physics occurring at high energy. We generically find that any localized eigenstate is a very good approximation for an eigenstate of a distinct parent Hamiltonian, with an energy variance σ$_P^2$(L)=⟨$H^2_P$⟩ ψ 0 -(Η P )$_{ψ_0}^2$ vanishing as a power law of system size L. This decay is microscopically related to a chain-breaking mechanism, also signaled by bottlenecks of vanishing entanglement entropy. A similar phenomenology is observed for both Anderson and MBL. In contrast, delocalized ergodic many-body eigenstates uniquely encode the Hamiltonian in the sense that σ$_P^2$(L) remains finite at the thermodynamic limit, i.e., L → +∞. Finally, as a direct consequence, the ergodic-MBL transition can be very well captured from the scaling of σ$_P^2$(L).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

UV massive resonance from IR double copy consistency

From the perspective of effective field theory (EFT), Wilson coefficients of the low energy theory are determined by integrating out modes of the full ultraviolet (UV) theory. The spectrum can be in principle resummed if one has access to all available infrared (IR) coefficients at low energies. In this work we show that there exists a general class of consistent massive resonance double-copy (CMRDC) models where UV massive residues are reconstructed through double-copy consistency conditions between the IR Wilson coefficients of the full EFT expansion. Through a color-dual bootstrap, we find surprisingly that double-copy consistency alone introduces the kinematic factors of CMRDC models that soften high energy behavior by exponentiating color-dual contacts. This bootstrap suggests that our massive resonance paradigm is an inevitable consequence of the duality between color and kinematics, thereby providing a path towards emergent UV structure directly from the IR. We then demonstrate how CMRDC models can capture a spectrum of massive modes compatible with general multiplicity, and use Padé extrapolation to solve the inverse problem of identifying massive UV resonance from a small number of IR Wilson coefficients. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Finding Matrix Product State Representations of Highly Excited Eigenstates of Many-Body Localized Hamiltonians

A key property of many-body localized Hamiltonians is the area law entanglement of even highly excited eigenstates. Matrix product states (MPS) can be used to efficiently represent low entanglement (area law) wave functions in one dimension. An important application of MPS is the widely used density matrix renormalization group (DMRG) algorithm for finding ground states of one-dimensional Hamiltonians. Here, we develop two algorithms, the shift-and-invert MPS (SIMPS) and excited state DMRG which find highly excited eigenstates of many-body localized Hamiltonians. Excited state DMRG uses a modified sweeping procedure to identify eigenstates, whereas SIMPS applies the inverse of the shifted Hamiltonian to a MPS multiple times to project out the targeted eigenstate. To demonstrate the power of these methods, we verify the breakdown of the eigenstate thermalization hypothesis in the many-body localized phase of the random field Heisenberg model, show the saturation of entanglement in the many-body localized phase, and generate local excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of the Reactor Antineutrino Flux and Spectrum at Daya Bay

Here, the Daya Bay experiment has observed correlations between reactor core fuel evolution and changes in the reactor antineutrino flux and energy spectrum. Four antineutrino detectors in two experimental halls were used to identify 2.2 million inverse beta decays (IBDs) over 1230 days spanning multiple fuel cycles for each of six 2.9 GW th reactor cores at the Daya Bay and Ling Ao nuclear power plants. Using detector data spanning effective 239 Pu fission fractions F 239 from 0.25 to 0.35, Daya Bay measures an average IBD yield ¯σf of (5.90±0.13)×10 –43 cm 2 /fission and a fuel-dependent variation in the IBD yield, dσ f /dF 239 , of (–1.86±0.18)×10 –43 cm 2 /fission. This observation rejects the hypothesis of a constant antineutrino flux as a function of the 239 Pu fission fraction at 10 standard deviations. The variation in IBD yield is found to be energy dependent, rejecting the hypothesis of a constant antineutrino energy spectrum at 5.1 standard deviations. While measurements of the evolution in the IBD spectrum show general agreement with predictions from recent reactor models, the measured evolution in total IBD yield disagrees with recent predictions at 3.1σ. This discrepancy indicates that an overall deficit in the measured flux with respect to predictions does not result from equal fractional deficits from the primary fission isotopes 235 U, 239 Pu, 238 U, and 241 Pu. Based on measured IBD yield variations, yields of (6.17±0.17) and (4.27±0.26)×10 –43 cm 2 /fission have been determined for the two dominant fission parent isotopes 235 U and 239 Pu. A 7.8% discrepancy between the observed and predicted 235 U yields suggests that this isotope may be the primary contributor to the reactor antineutrino anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-E-T-365: Estimation of Neutron Ambient Dose Equivalents for Radioprotection Exposed Workers in Radiotherapy Facilities Based On Characterization Patient Risk Estimation

Purpose: Previous measurements with Bonner spheres{sup 1} showed that normalized neutron spectra are equal for the majority of the existing linacs{sup 2}. This information, in addition to thermal neutron fluences obtained in the characterization procedure{sup 3}3, would allow to estimate neutron doses accidentally received by exposed workers, without the need of an extra experimental measurement. Methods: Monte Carlo (MC) simulations demonstrated that the thermal neutron fluence distribution inside the bunker is quite uniform, as a consequence of multiple scatter in the walls{sup 4}. Although inverse square law is approximately valid for the fast component, a more precise calculation could be obtained with a generic fast fluence distribution map around the linac, from MC simulations{sup 4}. Thus, measurements of thermal neutron fluences performed during the characterization procedure{sup 3}, together with a generic unitary spectra{sup 2}, would allow to estimate the total neutron fluences and H*(10) at any point{sup 5}. As an example, we compared estimations with Bonner sphere measurements{sup 1}, for two points in five facilities: 3 Siemens (15–23 MV), Elekta (15 MV) and Varian (15 MV). Results: Thermal neutron fluences obtained from characterization, are within (0.2–1.6×10{sup 6}) cm−{sup 2}•Gy{sup −1} for the five studied facilities. This implies ambient equivalent doses ranging from (0.27–2.01) mSv/Gy 50 cm far from the isocenter and (0.03–0.26) mSv/Gy at detector location with an average deviation of ±12.1% respect to Bonner measurements. Conclusion: The good results obtained demonstrate that neutron fluence and H*(10) can be estimated based on: (a) characterization procedure established for patient risk estimation in each facility, (b) generic unitary neutron spectrum and (c) generic MC map distribution of the fast component. [1] Radiat. Meas (2010) 45: 1391 – 1397; [2] Phys. Med. Biol (2012) 5 7:6167–6191; [3] Med. Phys (2015) 42:276 - 281. [4] IFMBE (2012) 39: 1245–1248. [5] ICRU Report 57 (1998)

60 APPLIED LIFE SCIENCES↗

Seismic Modeling Workshop - Joint inversion [Slides]

Why joint inversion? It enables spanning spatial and data scales! Multiple benefits: Different data sets have different spatial coverage and resolution. “Standard” geophysical models are developed only to fit one type of data. Different data types have different strengths. Multiple challenges: Deal with different data bandwidths. Design responsive misfit norms; relative weighting of data sets. Make assumptions to model the different data; relationships between independent data sets.

58 GEOSCIENCES↗

Consistent evaluation of GOSAT, SCIAMACHY, carbontracker, and MACC through comparisons to TCCON

Consistent validation of satellite CO 2 estimates is a prerequisite for using multiple satellite CO 2 measurements for joint flux inversion, and for establishing an accurate long-term atmospheric CO 2 data record. We focus on validating model and satellite observation attributes that impact flux estimates and CO 2 assimilation, including accurate error estimates, correlated and random errors, overall biases, biases by season and latitude, the impact of coincidence criteria, validation of seasonal cycle phase and amplitude, yearly growth, and daily variability. We evaluate dry air mole fraction (X CO 2 ) for GOSAT (ACOS b3.5) and SCIAMACHY (BESD v2.00.08) as well as the CarbonTracker (CT2013b) simulated CO 2 mole fraction fields and the MACC CO 2 inversion system (v13.1) and compare these to TCCON observations (GGG2014). We find standard deviations of 0.9 ppm, 0.9, 1.7, and 2.1 ppm versus TCCON for CT2013b, MACC, GOSAT, and SCIAMACHY, respectively, with the single target errors 1.9 and 0.9 times the predicted errors for GOSAT and SCIAMACHY, respectively. When satellite data are averaged and interpreted according to error 2 = a 2 + b 2 / n (where n are the number of observations averaged, a are the systematic (correlated) errors, and b are the random (uncorrelated) errors), we find that the correlated error term a = 0.6 ppm and the uncorrelated error term b = 1.7 ppm for GOSAT and a = 1.0 ppm, b = 1.4 ppm for SCIAMACHY regional averages. Biases at individual stations have year-to-year variability of ~ 0.3 ppm, with biases larger than the TCCON predicted bias uncertainty of 0.4 ppm at many stations. Using fitting software, we find that GOSAT underpredicts the seasonal cycle amplitude in the Northern Hemisphere (NH) between 46–53° N. In the Southern Hemisphere (SH), CT2013b underestimates the seasonal cycle amplitude. Biases are calculated for 3-month intervals and indicate the months that contribute to the observed amplitude differences. The seasonal cycle phase indicates whether a dataset or model lags another dataset in time. We calculate this at a subset of stations where there is adequate satellite data, and find that the GOSAT retrieved phase improves substantially over the prior and the SCIAMACHY retrieved phase improves substantially for 2 of 7 sites. The models reproduce the measured seasonal cycle phase well except for at Lauder125 (CT2013b), Darwin (MACC), and Izana (+ 10 days, CT2013b), as for Bremen and Four Corners, which are highly influenced by local effects. We compare the variability within one day between TCCON and models in JJA; there is correlation between 0.2 and 0.8 in the NH, with models showing 10–100 % the variability of TCCON at different stations (except Bremen and Four Corners which have no variability compared to TCCON) and CT2013b showing more variability than MACC. This paper highlights findings that provide inputs to estimate flux errors in model assimilations, and places where models and satellites need further investigation, e.g. the SH for models and 45–67° N for GOSAT

54 ENVIRONMENTAL SCIENCES↗

Three-dimensional cooperative inversion of airborne magnetic and gravity gradient data using deep-learning techniques

Using multiple geophysical methods has become a prevailing approach in numerous geophysical applications to investigate subsurface structures and parameters. These multimethod-based exploration strategies have the potential to greatly diminish uncertainties and ambiguities encountered during geophysical data analysis and interpretation. One of the applications is the cooperative inversion of airborne magnetic and gravity gradient data for the interpretation of data obtained in mineral, oil and gas, and geothermal explorations. In this paper, a unified cooperative inversion framework is designed by combining the standard separate inversions with a deep neural network (DNN), which serves as the link between different types of data. A well-trained DNN takes the separately inverted susceptibility and density models as the inputs and provides improved models that will be used as the initial models of deterministic inversions. A two-round iteration strategy is adopted to guarantee the reasonability of the recovered models and overall efficiency of the inversion. In addition, this deep-learning (DL)-based framework demonstrates excellent generalization abilities when tested on models that are entirely distinct from the training data sets. The framework can easily incorporate multiphysics without necessitating any structural changes to the network. Synthetic experiments validate that our DL-based method outperforms conventional separate inversions and cross-gradient-based joint inversion in view of the accuracy of the recovered models and inversion efficiency. Successful application to field data further verifies the effectiveness of our DL-based method.

Geochemistry & Geophysics↗

Physics-Informed Generative Adversarial Networks for Stochastic Differential Equations

We developed a new class of physics-informed generative adversarial networks (PI-GANs) to solve forward, inverse, and mixed stochastic problems in a unified manner based on a limited number of scattered measurements. Unlike standard GANs relying solely on data for training, here we encoded into the architecture of GANs the governing physical laws in the form of stochastic differential equations (SDEs) using automatic differentiation. In particular, we applied Wasserstein GANs with gradient penalty (WGAN-GP) for its enhanced stability compared to vanilla GANs. We first tested WGAN-GP in approximating Gaussian processes of different correlation lengths based on data realizations collected from simultaneous reads at sparsely placed sensors. We obtained good approximation of the generated stochastic processes to the target ones even if there is a mismatch between the input noise dimensionality and the effective dimensionality of the target stochastic processes. We also studied the overfitting issue for both the discriminator and the generator, and we found that overfitting occurs also in the generator in addition to the discriminator as previously reported. Subsequently, we considered the solution of elliptic SDEs requiring approximations of three stochastic processes, namely the solution, the forcing, and the diffusion coefficient. Here again, we assumed data collected from simultaneous reads at a limited number of sensors for the multiple stochastic processes. Furthermore, three generators were used for the PI-GANs: two of them were feed forward deep neural networks (DNNs), while the other one was the neural network induced by the SDE. For the case where we have one group of data, we employed one feed forward DNN as the discriminator, while for the case of multiple groups of data we employed multiple discriminators in PI-GANs. We solved forward, inverse, and mixed problems without changing the framework of PI-GANs, obtaining both the means and the standard deviations of the stochastic solution and the diffusion coefficient in good agreement with benchmarks. In this work, we have demonstrated the effectiveness of PI-GANs in solving SDEs for about 120 dimensions. In principle, PI-GANs could tackle very high dimensional problems given more sensor data with low-polynomial growth in computational cost.

97 MATHEMATICS AND COMPUTING↗

Non-invasive material discrimination using spectral x-ray radiography

Current radiographic methods are limited in their ability to determine the presence of nuclear materials in containers or composite objects. A central problem is the inability to distinguish the attenuation pattern of high-density metals from those with a greater thickness of a less dense material. Here, we show that spectrally sensitive detectors can be used to discriminate plutonium from multiple layers of other materials using a single-view radiograph. An inverse algorithm with adaptive regularization is used. The algorithm can determine the presence of plutonium in simulated radiographs with a mass resolution per unit area of at least 0.07 g cm{sup −2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SYSTEMIC: A TESTBED FOR CHARACTERIZING THE DETECTION OF EXTRASOLAR PLANETS. II. NUMERICAL APPROACHES TO THE TRANSIT TIMING INVERSE PROBLEM

Transit timing variations (TTVs)-deviations from strict periodicity between successive passages of a transiting planet-can be used to probe the structure and dynamics of multiple-planet systems. In this paper, we examine prospects for numerically solving the so-called inverse problem, the determination of the orbital elements of a perturbing body from the TTVs it induces. We assume that the planetary systems under examination have a limited number of Doppler velocity measurements and show that a more extensive radial velocity (RV) characterization with precision comparable to the semi-amplitude of the perturber may remove degeneracies in the solution. We examine several configurations of interest, including (1) a prototypical non-resonant system, modeled after HD 40307 b and c, which contains multiple super-Earth-mass planets, (2) a hypothetical system containing a transiting giant planet with a terrestrial-mass companion trapped in low-order mean motion resonance, and (3) the HAT-P-13 system, in which forced precession by an outer perturbing body that is well characterized by Doppler RV measurements can give insight into the interior structure of a perturbing planet, and for which the determination of mutual inclination between the transiting planet and its perturber is a key issue.

79 ASTRONOMY AND ASTROPHYSICS↗

Self‐Potential Tomography Preconditioned by Particle Swarm Optimization—Application to Monitoring Hyporheic Exchange in a Bedrock River

Abstract A self‐potential (SP) data‐inversion algorithm was developed and tested on an analytical model of electrical‐potential profile data attributed to single and multiple polarized electrical sources. The developed algorithm was then validated by an application to SP‐monitoring field data measured on the floodplain of East Fork Poplar Creek, Oak Ridge, Tennessee, to image electrical sources in areas conducive to preferential flow into the flood plain from the bedrock‐lined riverbed. The algorithm combined stochastic source‐localization by particle‐swarm‐optimization (PSO) of electrical sources characterized by simplified geometries with source tomography by regularized weighted least‐squares minimization of a quadratic objective function. Prior information was incorporated by preconditioning the tomography algorithm by PSO results. Variable percentages of random noise were added to analytical‐model data to evaluate the algorithm performance. Results indicated that true parameters of single‐source models were inverted and approximated with small residual error, whereas inversion of analytical‐model data representing multiple electrical sources accurately approximated the locations of the sources but miscalculated some parameters because of the non‐uniqueness of the inverse‐model solution. Source tomography applied to analytical model data during testing produced a spatially continuous parameter field that identified the locations of point‐scale synthetic dipole sources of electrical current flow with varying degrees of accuracy depending on the prior information incorporated into the tomography. When applied to SP‐monitoring field data, the algorithm imaged electrical sources within a known fault that intersects the bedrock riverbed and flood plain of East Fork Poplar Creek and depicted dynamic electrical conditions attributed to hyporheic exchange.

54 ENVIRONMENTAL SCIENCES↗

Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite

Mimicking nacre structure is an often-used strategy for developing materials which combine high strength and high toughness. Here, a novel strategy, named inverse nacre structure, is proposed where elongated and curled soft constituents are embedded in a matrix of hard constituent to form an ordered brick-and-mortar arrangement. This strategy is demonstrated in a particle reinforced metal matrix composite, using pure Mg as the soft phase and SiC nanoparticle reinforced Mg as the hard phase. In this work, the resulting nanocomposite yields high strength, and especially high tensile elongation which is five times that of the homogeneous counterpart. The superior comprehensive strengthening-toughening effect originates from the tailored inverse nacre structure which enables a stable microcrack-multiplication process by sufficiently promoting strain hardening so as to avoid any significant decrease in post-ultimate tensile strength. This strategy, while demonstrated here for the specific case of particle reinforced Mg, is not restricted to any particular material system but constitutes a generic pathway for the development of high-performance materials for engineering applications.

36 MATERIALS SCIENCE↗

Ligand Control of Oxidation and Crystallographic Disorder in the Isolation of Hexavalent Uranium Mono-Oxo Complexes

Here, the development of high-valent transuranic chemistry requires robust methodologies to access and fully characterize reactive species. We have recently demonstrated that the reducing nature of imidophosphorane ligands supports the two-electron oxidation of U 4+ to U 6+ and established the use of this ligand to evaluate the inverse-trans-influence (ITI) in actinide metal-ligand multiple bond (MLMB) complexes. To extend this methodology and analysis to transuranic complexes, new small-scale synthetic strategies and lower-symmetry ligand derivatives are necessary to improve crys-tallinity and reduce crystallographic disorder. To this end, the synthesis of two new imidophosphorane ligands, [N=P t Bu(pip) 2 ]¯ (NPC 1 ) and [N=P t Bu(pyrr) 2 ]¯ (NPC 2 ) (pip = piperidinyl; pyrr = pyrrolidinyl) is presented, which break pseudo-C 3 axes in the tetravalent complexes, U[NPC 1 ] 4 and U[NPC 2 ] 4 . The reaction of these complexes with two-electron oxygen atom transfer reagents (N 2 O, trimethylamine N-oxide (TMAO) and 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene (dbabhNO)) yields the U 6+ mono-oxo complexes U(O)[NPC 1 ] 4 and U(O)[NPC 2 ] 4 . This methodology is optimized for direct translation to transuranic elements. Of the two ligands, the NPC 2 framework is most suitable for facilitating detailed bonding analysis and assessment of the ITI. Theoretical evaluation of the U–(NPC) bonding confirms a substantial difference between axially and equatorially-bonded N atoms, revealing mark-edly more covalent U–N ax interactions. The U 6d+5f combined contribution for U–N ax is nearly double that of U–N eq , accounting for ITI shortening and increased bond order of the axial bond. Two distinct N-atom hybridizations in the pyrrolidine/piperidine rings are noted across the complexes, with approximate sp 2 and sp 3 configurations describing the slightly shorter P–N “planar” and slightly longer P–N “pyramidal” bonds, respectively. In all complexes, the NPC 2 ligands feature more planar N atoms than NPC 1 , in accordance with a higher electron-donating capacity of the former.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tomographic Reconstruction of the Neutron Time-Energy Spectrum from a Dense Plasma Focus

A dense plasma focus (DPF) nuclear fusion device is an attractive pulsed neutron source in many applications, due to its relatively large neutron yield, produced in a short time duration. In order to design a DPF that generates neutrons within a specified time profile, or generates a neutron energy spectrum with specific properties, it is necessary to be able to characterize and model the results of the fusion process releasing the neutrons. The time-energy spectrum of fusion neutrons is an ideal quantity to use to validate multiphysics codes that simulate the pinch and fusion processes, because it is a quantity that requires the physics of each of the stages leading up to and ending in the fusion reaction to be simulated correctly. In particular, since DPF fusion neutrons are not monoenergetic -- and there can often be several fusion pinches creating neutrons -- a computer simulation matching high quality neutron spectrum measurements provides great confidence in the fidelity of the simulation. In order to make such a comparison, it is first necessary to have quality measurements from which to infer the spectrum. In this work we pose neutron spectroscopy as the classical tomographic inverse problem from neutron time of flight data at multiple distances, but enhanced by using an additional measurement of the time profile of the fusion pinch near its source and by using detector pairs set up in a geometry that allows for scatter background subtraction. The detector pairs enhance the quality of the time of flight measurements, and the additional constraint posed by the measured time profile allows for reconstructions discretized as finely as the time measurements and in energy as finely as 100 keV, without the problem being underdetermined. We present results from a Deuterium-fueled DPF at the U.S. Department of Energy's Nevada National Security Site and show that we can infer the time-energy spectrum from our measurements for both single and multi-pinch fusion reactions with equal fidelity.

Catenacci, Jared↗

Concurrent Monte Carlo transport and fluence optimization with fluence adjusting scalable transport Monte Carlo

Purpose: The future of radiation therapy will require advanced inverse planning solutions to support single-arc, multiple-arc, and “4π” delivery modes, which present unique challenges in finding an optimal treatment plan over a vast search space, while still preserving dosimetric accuracy. The successful clinical implementation of such methods would benefit from Monte Carlo (MC) based dose calculation methods, which can offer improvements in dosimetric accuracy when compared to deterministic methods. The standard method for MC based treatment planning optimization leverages the accuracy of the MC dose calculation and efficiency of well-developed optimization methods, by precalculating the fluence to dose relationship within a patient with MC methods and subsequently optimizing the fluence weights. However, the sequential nature of this implementation is computationally time consuming and memory intensive. Methods to reduce the overhead of the MC precalculation have been explored in the past, demonstrating promising reductions of computational time overhead, but with limited impact on the memory overhead due to the sequential nature of the dose calculation and fluence optimization. The authors propose an entirely new form of “concurrent” Monte Carlo treat plan optimization: a platform which optimizes the fluence during the dose calculation, reduces wasted computation time being spent on beamlets that weakly contribute to the final dose distribution, and requires only a low memory footprint to function. In this initial investigation, the authors explore the key theoretical and practical considerations of optimizing fluence in such a manner. Methods: The authors present a novel derivation and implementation of a gradient descent algorithm that allows for optimization during MC particle transport, based on highly stochastic information generated through particle transport of very few histories. A gradient rescaling and renormalization algorithm, and the concept of momentum from stochastic gradient descent were used to address obstacles unique to performing gradient descent fluence optimization during MC particle transport. The authors have applied their method to two simple geometrical phantoms, and one clinical patient geometry to examine the capability of this platform to generate conformal plans as well as assess its computational scaling and efficiency, respectively. Results: The authors obtain a reduction of at least 50% in total histories transported in their investigation compared to a theoretical unweighted beamlet calculation and subsequent fluence optimization method, and observe a roughly fixed optimization time overhead consisting of ∼10% of the total computation time in all cases. Finally, the authors demonstrate a negligible increase in memory overhead of ∼7–8 MB to allow for optimization of a clinical patient geometry surrounded by 36 beams using their platform. Conclusions: This study demonstrates a fluence optimization approach, which could significantly improve the development of next generation radiation therapy solutions while incurring minimal additional computational overhead.

60 APPLIED LIFE SCIENCES↗