Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Toward inverse backscatter absorption gas imaging: imaging a dry gas plume with ambient H 2 O absorption

This paper introduces inverse backscatter absorption gas imaging (iBAGI), a transparent gas imaging technique based on absorption spectroscopy of gases naturally present in ambient air being displaced by transparent gases. We demonstrate reconstruction of a 2-D image of a dry gas plume by measuring light of a raster-scanned diode laser tuned to an absorption line of atmospheric H 2 O. We quantify the performance depending on the distance to the backdrop and show that the key transmission metric is independent of absorption path length. We conclude with an outlook toward calibration-free, single-ended iBAGI using scattering from low-reflectivity backdrops.

Klug, Joseph C.↗
DOE OSTI2025

Predictable third harmonic generation in GaAs metasurfaces through group theory inverse design of meta-atoms

Here we report the group theory-based inverse design of meta-atoms for a dielectric metasurface in GaAs with predictable optical linear response and third harmonic generation (THG). Six sharp Fano resonances have been observed with a corresponding polarization dependence as predicted by group theory and the meta-atom’s symmetry in the D2h point group. THG has been observed for two modes under x-polarization excitation and one mode for y-polarization, in agreement with theoretical symmetry predictions. The polarization-dependent THG aspect ratio was observed to reach as high as 108. Through strategic structural or symmetry-preserving perturbations, it was shown that the THG can be enhanced or reduced by a factor of 7. The highest THG conversion efficiency was estimated to be 3.1×10-7 at the pump intensity of 1.51 MW/cm2. This high THG conversion efficiency indicates that our group theory approach to modal engineering opens a new path towards optical nonlinearity tuning in dielectric metasurfaces.

Aoueille, Andrew↗
DOE OSTI2024

Mode-multiplexed photonic integrated vector dot-product core from inverse design

Photonic computing has the potential to harness the full degrees of freedom (DOFs) of the light field, including the wavelength, spatial mode, spatial location, phase quadrature, and polarization, to achieve a higher level of computing parallelism and scalability than digital electronic processors. While multiplexing using the wavelength and other DOFs can be readily integrated on silicon photonics platforms with compact footprints, conventional mode-division multiplexed (MDM) photonic designs occupy areas exceeding tens to hundreds of microns for a few spatial modes, significantly limiting their scalability. Here, we utilize inverse design to demonstrate an ultracompact photonic computing core that calculates vector dot products based on MDM coherent mixing. Our dot-product core integrates the functionalities of two-mode multiplexers and one multimode coherent mixer within a nominal footprint of 5 μm x 3 μm . We have experimentally demonstrated computing examples on the fabricated dot-product core, including complex number multiplication and motion estimation using optical flow. The compact dot-product core design enables large-scale on-chip integration in a parallel photonic computing primitive cluster for high-throughput scientific computing and computer vision tasks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

An Inverse Heat Conduction Algorithm Used to Calculate the Temperatures on the Inner and Outer Cylindrical Surfaces of an HMX-based PBX Explosive Annulus

In this work, a new Inverse Heat Conduction (IHC) algorithm is applied to estimate the surface temperatures at twelve locations on the inner and outer cylindrical boundaries of an HMX-based Plastic Bonded Explosive (PBX) annulus. This IHC algorithm was developed in references using a set of Direct Heat Conduction (DHC) solutions and a temperature correction method. The DHC solutions were calculated using a Galerkin based finite element (FE) method. This HMX based PBX annulus was used in the Large Scale Annular Cookoff (LSAC) experiment, Shot 5. The reason Shot 5 was chosen as a prototype mathematical model for this study is that the temperature was measured at eighteen locations in the midplane of the HMX-based PBX annulus. In addition, this annulus underwent an experimental thermal ignition and a deflagration that caused a thermal explosion and the disassembly of the experiment. The objective of this study is to describe how the application of the temperature correction algorithm produced the convergence of the DHC solutions to the measured temperatures at twelve internal locations in the midplane of the HMX-based PBX annulus.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Computing the Instantaneous Collision Probability between Satellites using Characteristic Function Inversion

The probability that two satellites overlap in space at a specified instant of time is called their instantaneous collision probability. Assuming Gaussian uncertainties and spherical satellites, this probability is the integral of a Gaussian distribution over a sphere. This paper shows how to compute the probability using an established numerical procedure called characteristic function inversion. The collision probability in the short-term encounter scenario is also evaluated with this approach, where the instant at which the probability is computed is the time of closest approach between the objects. Python and R code is provided to evaluate the probability in practice. Overall, the approach has been established for over fifty years, is implemented in existing software, does not rely on analytical approximations, and can be used to evaluate two and three dimensional collision probabilities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Deep Learning for Full Waveform Inversion of Elastic Active-Source Seismic Data to Estimate P-Wave Velocity Models

Seismic imaging methods are critical for Global Security and Energy & Homeland Security missions and activities that rely on subsurface characterization, but traditional methods remain computationally expensive and require significant labor hours and expertise to execute. Within the past few years, machine learning (ML), namely deep learning (DL), has been used to develop data-driven end-to-end full waveform inversion (FWI) methods to estimate 2D P-wave velocity (Vp) models in a fraction of the time as conventional FWI. These methods, however, are trained on simplistic acoustic wave seismic data and Vp models that are not realistic nor representative of real-world observations, leaving a large gap between the state-of-the-art and deployable, feasible, and practical DL FWI methods. Here, we generate a synthetic active-source, 3D, elastic wave seismic data set and a variety of Vp models with realistic geologic structure for training DL FWI methods. We evaluate six different methods that have performed well for acoustic DL FWI or medical imaging tasks using our more realistic dataset. We find that these six trained models do not match the performance of published acoustic end-to-end DL FWI methods, indicating more training data may be needed, physics may need to be incorporated to achieve good accuracy at the sacrifice of the end-to-end advantage, and/or novel methods need to be developed to enable end-to-end DL FWI methods to perform well for real-world seismic data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2024

Using DAPPER to extract the photon strength function of 58Fe using the inverse Oslo and shape methods

The photon strength function of 58 Fe has been extracted using both the Oslo and Shape methods from particle-γ coincidence data measured using the Detector Array for Photons, Protons, and Exotic Residues, which probes nuclei utilizing (d,p) reactions in inverse kinematics. Four particle-γ coincidence matrices, each constructed with different treatments of the γ-ray energies, are explored in order to observe the impact on the resulting nuclear level density and photon strength. The final photon strength function reported is found to agree well with previous Oslo measurements of other iron isotopes. Systematic uncertainties are included, using different model parameters and their reported errors to perform the Oslo method normalization. The model-independent Shape method is explored and the functional form of the photon strength function obtained is in agreement with the Oslo method results. A low-energy enhancement is not reported for 58 Fe in this work given possible subtraction issues originating from strongly populated states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Scalable Algorithms for Inverse Problems With High-Dimensional Parameter Spaces

Inverse problems, which involve inferring unknown parameters from observed data, present significant computational challenges, especially in large-scale settings with high-dimensional unknown parameters and nonlinear relationships between the unknowns and observations. Bayesian inference provides an approach for addressing these problems, often relying on sequential sampling methods like Markov chain Monte Carlo (MCMC) to approximate the posterior distribution of the parameters. However, MCMC methods become computationally demanding as the dimensionality of the problem increases, particularly in large-scale systems where likelihood evaluations rely on solving partial differential equations (PDEs) on large spatial domains with finely resolved meshes. To overcome these limitations, recent advancements have focused on designing scalable computa tional techniques – for both PDE simulations and sampling strategies – to make Bayesian methods feasible for high-dimensional problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Uncertainty quantification for inverse problems with application to ptychographic reconstruction

Inverse problems in imaging are commonly solved by optimization or learned surrogates that return a single reconstruction, while uncertainty information is often unavailable. In many experimental settings, however, uncertainty is required to assess reliability, guide downstream analysis, and prioritize additional measurements. In this note, we present a compact uncertainty-quantification framework based on local objective curvature, and then specialize it to ptychographic reconstruction. We further show how repeated reconstructions can be aggregated in a statistically principled way, including a practical implementation path for PtychoNN.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Signal-to-background estimates for the inverse-kinematics 78 Kr(n,γ) experiment at LANSCE

The idea of a neutron target enables the measurement of neutron-induced reactions in inverse kinematics. This idea is part of the LANSCE strategy to stay a worldwide leader for neutron-induced research. The proof-of-principle experiment outlined in is the core of the LDRD project 20240004DR. The current approach is to use an ion source capable of accelerating single-charged ions up to about 60 keV. A beam of 78 Kr + ions will be created to interact with a neutron target and implanted. During the passage of the target, neutrons can be captured and the freshly produced 79 Kr + ions will be implanted along with the main beam.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

T3tris: AI-Driven Inverse Design of Cellular Materials

Los Alamos National Laboratory has developed T3tris, a generative AI platform that enables real-time inverse design of architected cellular materials. This capability transforms how mechanical metamaterials are designed by generating microstructural topologies that conform to target nonlinear stress-strain curves, even at high compressive strain (up to 50%).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Approaches to the Inverse Problem

In this talk, I describe some recent ideas relating to the spectral reconstruction inverse problem, which arises frequently in lattice QCD calculations of inclusive hadronic quantities, and provide some physical context for this work. Particular emphasis is given to a new method for rigorously bounding uncertainties using techniques from complex analysis.

Jay, William [Massachusetts Institute of Technolog↗
DOE OSTI2026

The Effect of Inverse Compton Losses on Particle Acceleration in Three-dimensional Relativistic Reconnection

Relativistic magnetic reconnection is a key mechanism for dissipating magnetic energy and accelerating particles in astrophysics. In the absence of radiative cooling, recent particle-in-cell (PIC) simulations have shown that high-energy particles gain most of their energy in the upstream region, during a short-lived “free phase” where they meander between the two sides of the layer; when they get captured/trapped by the downstream flux ropes, they undergo a “trapped phase,” where no significant energization occurs. Here, we perform a suite of 3D PIC simulations of relativistic reconnection, including inverse Compton (IC) losses in the weakly cooled regime in which the radiation-reaction-limited Lorentz factor γrad exceeds the magnetization σ. We show that electron cooling losses do not appreciably alter the reconnection rate, the structure of the layer, and the physics of particle acceleration in the free phase, so the spectrum of free electrons is dN free /dγ ∝ γ −1 , as in the uncooled case. The spectrum of trapped electrons above the cooling break γcool (in the range γ cool < γ < γ rad ) is dN/dγ ∝ γ −3 , steeper than the scaling dN/dγ ∝ γ −2 of uncooled simulations. This confirms that no significant particle energization occurs during the trapped phase. Our results validate the model by Zhang et al. for particle acceleration in 3D relativistic reconnection, and imply that radiative emission models of reconnection-powered astrophysical sources should employ a two-zone structure that differentiates between free, rapidly accelerating particles and trapped, passively cooling particles.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Nuclear Data Adjustment for Nonlinear Applications in the OECD/NEA WPNCS SG14 Benchmark -- A Bayesian Inverse UQ-based Approach for Data Assimilation

The Organization for Economic Cooperation and Development (OECD) Working Party on Nuclear Criticality Safety (WPNCS) proposed a benchmark exercise to assess the performance of current nuclear data adjustment techniques applied to nonlinear applications and experiments with low correlation to applications. This work introduces Bayesian Inverse Uncertainty Quantification (IUQ) as a method for nuclear data adjustments in this benchmark, and compares IUQ to the more traditional methods of Generalized Linear Least Squares (GLLS) and Monte Carlo Bayes (MOCABA). Posterior predictions from IUQ showed agreement with GLLS and MOCABA for linear applications. When comparing GLLS, MOCABA, and IUQ posterior predictions to computed model responses using adjusted parameters, we observe that GLLS predictions fail to replicate computed response distributions for nonlinear applications, while MOCABA shows near agreement, and IUQ uses computed model responses directly. We also discuss observations on why experiments with low correlation to applications can be informative to nuclear data adjustments and identify some properties useful in selecting experiments for inclusion in nuclear data adjustment. Performance in this benchmark indicates potential for Bayesian IUQ in nuclear data adjustments.

FOS: Computer and information sciences↗
DOE OSTI2026

The effect of inverse Compton losses on particle acceleration in three-dimensional relativistic reconnection

Relativistic magnetic reconnection is a key mechanism for dissipating magnetic energy and accelerating particles in astrophysics. In the absence of radiative cooling, recent particle-in-cell (PIC) simulations have shown that high-energy particles gain most of their energy in the upstream region, during a short-lived "free phase" where they meander between the two sides of the layer; when they get captured/trapped by the downstream flux ropes, they undergo a "trapped phase", where no significant energization occurs. Here, we perform a suite of 3D PIC simulations of relativistic reconnection including inverse Compton (IC) losses in the weakly cooled regime in which the radiation-reaction-limited Lorentz factor $γ_{\rm rad}$ exceeds the magnetization $σ$. We show that electron cooling losses do not appreciably alter the reconnection rate, the structure of the layer, and the physics of particle acceleration in the free phase, so the spectrum of free electrons is $dN_{\rm free}/dγ\propto γ^{-1}$, as in the uncooled case. The spectrum of trapped electrons above the cooling break $γ_{\rm cool}$ (in the range $γ_{\rm cool}<γ<γ_{\rm rad}$) is $dN/dγ\propto γ^{-3}$, steeper than the scaling $dN/dγ\propto γ^{-2}$ of uncooled simulations. This confirms that no significant particle energization occurs during the trapped phase. Our results validate the model by arXiv:2302.12269 for particle acceleration in 3D relativistic reconnection, and imply that radiative emission models of reconnection-powered astrophysical sources should employ a two-zone structure, that differentiates between free, rapidly accelerating particles and trapped, passively cooling particles.

FOS: Physical sciences↗
DOE OSTI2025

Orphaned oil and gas well methane emission rates quantified using Gaussian plume inversions of ambient observations

Abstract. Annually, ∼ 3.6 million abandoned oil and gas wells in the US emit a combined ∼ 2.6 Tg methane (CH4), adversely affecting climate and regional air quality. However, these estimates depend on emission factors derived from measuring subpopulations of wells that vary by orders of magnitude due to very limited field sampling and poorly characterized distributions. Currently, US protocols to remediate orphaned wells lacks standardized quantification methods needed to both prioritize plugging and account for emission reductions. Therefore, sensitive, reliable, affordable, and scalable CH4 flux quantification methods are needed. We report the use of a simple Gaussian plume method where the dispersion parameters are constrained by in situ ground measurements of CH4 concentration at four locations 7.5–49 m downwind of the orphan well as well as local winds to estimate the leak rate from an orphan well. We derive a flux of 10.53 ± 1.16 kg CH4 h−1 during a venting procedure in April 2023 that agrees with the directly measured volumetric flow rate of 9.00 ± 0.25 kg CH4 h−1. This is 71 % greater than the 5.3 kg CH4 h−1 flux measured 7 months prior. Additionally, we discovered a secondary leak through the surface casing inferred as 0.43–0.67 kg CH4 h−1 both by our ground Gaussian analysis and by transecting the plume with an uncrewed aerial system (UAS). We show that in situ determination of the dispersion parameters used in our Gaussian inversions allows us to measure methane emissions to 15 % accuracy, significantly reducing errors when compared to the standard practice of assuming stability class. Our results help develop simpler methods and protocols for robust orphan well emission quantification that can be used for reporting.

Follansbee, Emily↗
DOE OSTI2026

Data and Code for: Observation-constrained agroecosystem model inversion reveals continental-scale variation of winter wheat traits

This repository contains the simulation outputs and processing scripts associated with the study of winter wheat traits across the United States, utilizing the Ecosys agroecosystem model. The dataset includes model results for both rainfed and irrigated winter wheat systems, supporting the findings presented in the manuscript titled "Observation-constrained agroecosystem model inversion reveals continental-scale variation of winter wheat traits." Data includes the original Ecosys simulation outputs (archived in .db format within the compressed .zip files) and extracted analysis data (stored in .pkl files for efficient processing). Python code for data processing and figure generation is provided in a Jupyter notebook. External Observational Datasets should refer to the following official repositories for the input and validation data used in this study. The eddy covariance data from the AmeriFlux network (https://ameriflux.lbl.gov/). Climate-forcing data of NLDAS-2 from NASA LDAS (https://ldas.gsfc.nasa.gov/nldas/nldas-2-forcing-data). Soil data from the Gridded Soil Survey Geographic Database (gSSURGO), available at (https://www.nrcs.usda.gov/resources/data-and-reports/gridded-soil-survey-geographic-gssurgo-database). Crop yields, planting and harvest dates from the USDA public databases (https://quickstats.nass.usda.gov/; https://webapp.rma.usda.gov/apps/actuarialinformationbrowser/CropCriteria.aspx). Satellite-derived SLOPE GPP data from ORNL DAAC (https://daac.ornl.gov/cgi-bin/dsviewer.pl?ds_id=1786). Land use and crop progress information from the USDA Crop Data Layer and Crop Progress and Condition Gridded Layers (https://www.nass.usda.gov/Research_and_Science/). The Ecosys model code is available online at https://github.com/jinyun1tang/ECOSYS.

Wheat↗