Search NASA⌕ Search

SEARCH · Search NASA

Results for “Knowledge Management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

MatLib-1.2.2: Nuclear Material Properties Library

The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties of the nuclear materials and coolants of interest to support the U.S. commercial nuclear industry. MatLib contains properties for a variety of nuclear fuels, cladding and other structural materials, gases, and coolants. In this document, material property correlations for the materials contained within MatLib are presented and discussed. When available, comparisons are made between the material property correlations and available data. Additionally, uncertainties are quantified on the material properties, which is then used by the NRC to support uncertainty quantification for best-estimate plus uncertainty safety evaluation reviews. This document describes MatLib-1.2.2, updated from MatLib-1.2.1 to include additional properties for metallic fuel. It is one of a series of documents on FAST; the other documents detail the models used by FAST as well as its integral assessment to experiments and commercial data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pressure Safety Training (Rev. 8)

This is the workbook for the Pressure Safety Training Course. It is intended as a reference manual and guide for all work with pressurized liquids or gases. This workbook contains basic references to make work with pressure safer. It is intended to supplement classroom instruction, rather than serve as a definitive text on pressure. Earlier versions of the manual were intended specifically for training at Lawrence Livermore National Laboratory. This revision is a generic version intended for training at all DOE facilities. The information in the Standards chapter is from the LLNL Health and Safety Manual. It is included here as a convenient reference and guide for developing similar standards at your own facility.

42 ENGINEERING↗

GASNet-EX Specification Collection (Rev. 2024.5.0)

GASNet-EX is a portable, open-source, high-performance communication library designed to efficiently support the networking requirements of PGAS runtime systems and other alternative models in emerging exascale systems. It provides network-independent, high-performance communication primitives including Remote Memory Access (RMA) and Active Messages (AM). GASNet-EX is an evolution of the popular GASNet communication system, building upon over 20 years of lessons learned, and the primary goals are high performance, interface portability, and expressiveness. The library has been used to implement parallel programming models and libraries such as UPC, UPC++, Fortran coarrays, Legion, Chapel, and many others. This anthology collects together the four separate volumes that currently comprise the GASNet-EX specification, as of the 2024.5.0 release of GASNet-EX.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DICOMs, Missiles, and Metadata: The U.S. Nuclear Weapons Program Leverages a Medical Standard

Digital Imagine and Communications in Medicine (DICOM) images, although most commonly used in medical settings, have been widely adopted by the United States Department of Energy (DOE) for capturing images of the internal components in a nuclear weapon. DICOMs, a lesser-known file format that combine nested metadata structures with complex image data-including multiple planes, frames, and high resolution-require the creation of access copies to support usability within the DOE. Used primarily for ensuring the safety, security, and reliability of the U.S. nuclear stockpile, the Los Alamos National Laboratory (LANL)’s DICOM images and corresponding image metadata must be accessible to scientists and researchers via our institutional centralized databases. This paper describes the author's creation of a Python script that converts DICOM images into accessible, archive-friendly TIFF files while preserving key image data and metadata.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

The Journal of Open Source Software (JOSS): Bringing Open-Source Software Practices to the Scholarly Publishing Community for Authors, Reviewers, Editors, and Publishers

Open-source software (OSS) is a critical component of open science, but contributions to the OSS ecosystem are systematically undervalued in the current academic system. The Journal of Open Source Software (JOSS) contributes to addressing this by providing a venue (that is itself free, diamond open access, and all open-source, built in a layered structure using widely available elements/services of the scholarly publishing ecosystem) for publishing OSS, run in the style of OSS itself. A particularly distinctive element of JOSS is that it uses open peer review in a collaborative, iterative format, unlike most publishers. Additionally, all the components of the process—from the reviews to the papers to the software that is the subject of the papers to the software that the journal runs—are open. We describe JOSS’s history and its peer review process using an editorial bot, and we present statistics gathered from JOSS’s public review history on GitHub showing an increasing number of peer reviewed papers each year. We discuss the new JOSSCast and use it as a data source to understand reasons why interviewed authors decided to publish in JOSS. JOSS’s process differs significantly from traditional journals, which has impeded JOSS’s inclusion in indexing services such as Web of Science. In turn, this discourages researchers within certain academic systems, such as Italy’s, which emphasize the importance of Web of Science and/or Scopus indexing for grant applications and promotions. JOSS is a fully diamond open-access journal with a cost of around US$\$$5 per paper for the 401 papers published in 2023. The scalability of running JOSS with volunteers and financing JOSS with grants and donations is discussed.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Ensuring continued operation of INSPIRE as a cornerstone of the HEP information infrastructure

The INSPIRE platform — the most widely-used discovery service specifically tailored to the needs of researchers in High Energy Physics (HEP) — has become a central component of the information infrastructure for the discipline. Despite this, INSPIRE's continued sustainability is frequently endangered by resource constraints, recently made more acute by the loss of support from historical funders changing their research priorities. If the European particle physics community wishes to ensure INSPIRE's long-term sustainability, the community should secure international support and ensure appropriate funding.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Merged Observatory Data Files (MODFs): an integrated observational data product supporting process-oriented investigations and diagnostics

A large and ever-growing body of geophysical information is measured in campaigns and at specialized observatories as a part of scientific expeditions and experiments. These collections of observed data include many essential climate variables (as defined by the Global Climate Observing System) but are often distinguished by a wide range of additional non-routine measurements that are designed to not only document the state of the environment but also the drivers that contribute to that state. These field data are used not only to further understand environmental processes through observation-based studies but also to provide baseline data to test model performance and to codify understanding to improve predictive capabilities. To address the considerable barriers and difficulty in utilizing these diverse and complex data for observation–model research, the Merged Observatory Data File (MODF) concept has been developed. A MODF combines measurements from multiple instruments into a single file that complies with well-established data format and metadata practices and has been designed to parallel the development of corresponding Merged Model Data Files (MMDFs). Using the MODF and MMDF protocols will facilitate the evolution of model intercomparison projects into model intercomparison and improvement projects by putting observation and model data “on the same page” in a timely manner. The MODF concept was developed especially for weather forecast model studies in the Arctic. The surprisingly complex process of implementing MODFs in that context refined the concept itself. Thus, this article explains the concept of MODFs by providing details on the issues that were revealed and resolved during that first specific implementation. Detailed instructions are provided on how to make MODFs, and this article can be considered a MODF creation manual.

54 ENVIRONMENTAL SCIENCES↗

ANS-8 Nuclear Criticality Safety Consensus Standards - Current Initiatives

The nuclear criticality safety (NCS) consensus standards are developed as using rigorous procedures of the Standards Board of the American Nuclear Society. These procedures have been accredited by the American National Standards Institute, Inc., as meeting the criteria for American National Standards. The Nuclear Criticality Safety Consensus Committee (NCSCC) that approved all 18 NCS consensus standards is balanced to ensure that competent, concerned, and varied interests have had an opportunity to participate. The ANS-8 subcommittee (ANS-8) consists of 17 NCS experts with many years of experience as end users of ANS standards who serve on standard working groups to develop and maintain standards. ANS-8 ensures that the technical content of the standards is adequate for NCS community use. Attempts are made to ensure that ANS-8 consists of NCS professionals with a diverse range of experience such that all standards are applicable to as many sites as possible. ANS-8 is a very active subcommittee, and some active projects in progress are discussed in this paper: basis statement development for all standards, development of a glossary for consistency of definitions across all ANS-8 standards, and Considering the Criticality Safety Support Group (CSSG) Recommendation 2016-04 to the ANS Standards Board for changes in several ANS-8 standards.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Survey and Gap Prioritization of U.S. Electric Vehicle Charge Management Deployments

The goal of this study was to survey and characterize the scope of current technical and programmatic knowledge pertaining to EV charge management technologies and practices in the US and relevant international jurisdictions. This characterization of existing field demonstrations and knowledge derived were used to determine gaps in the SCM demonstration landscape. Addressing these gaps through research and demonstration could increase confidence in the U.S. that load management and EV charge control could achieve overarching societal benefits. A survey of charge management deployments and input from stakeholders was completed to determine the state-of-the-art of smart charge management (SCM) where SCM is defined as controlling the amount of power exchanged between chargers and EVs to meet customers' charging needs while also responding to external power demand or pricing signals to provide load management, resilience, or other benefits to the customer and electric grid. The survey was the basis of the gap analysis in this report and determines which areas are well understood, with high confidence, and which areas need further investigation. Existing examples of EV charge management are characterized here to determine aspects that are ready for widespread deployment and have been demonstrated in the field. These include demonstration studies, pilots, programs, and EV-specific tariffs. In all, 110 examples of charge management were characterized. The data sources were public literature and utility filings as well as targeted interviews. In addition, 43 interviews with stakeholders were conducted with a consistent set of questions used in each interview. This study prioritized gaps in demonstrated SCM capabilities based on 1) Urgency of the particular use-case to offset traditional grid assets, 2) Impact, extensibility, and scaling of results across the entire spectrum of 3000+ utility service territories including projected technical and market potential for a given grid service, and 3) Value of federal funding in addressing the gap, including potential to leverage and/or add scope to existing field demonstrations funded by other non-federal funding mechanisms.

33 ADVANCED PROPULSION SYSTEMS↗

Manganese in drinking-water reservoirs: a multi-disciplinary review of current issues, biogeochemical controls, and oxygenation-based management

Decreased water quality and increased treatment costs due to excess manganese (Mn) in drinking-water supplies are critical issues globally. To combat on-going and emerging taste and odour issues with Mn and other contaminants (e.g., algal toxins), many utilities are using engineered oxygenation or aeration (EOA) systems to improve water quality in lakes and reservoirs. Resultant shifts in key biogeochemical and physical processes are still poorly understood, often leading to inefficiently managed systems. Paired with knowledge gaps regarding environmental drivers of Mn and the complexity of Mn redox kinetics, Mn problems persist. This review presents the state of current research in areas critical to optimisation of EOA mitigation of Mn, with focus on i) Mn biogeochemical cycling within drinking-water reservoirs; ii) influences of local catchment geology, hydrology, and land use on Mn dynamics; and iii) Mn management using different EOA approaches. The importance of considering the combined implications of these factors for successful Mn management in reservoirs is highlighted by an evaluation of relevant field-based studies; a wide range in EOA performance is observed, from a 97 % decrease in soluble Mn up to a ∼400 % increase in total Mn. Despite the breadth of studies that consider Mn in water-supply systems, there are still several areas of research which warrant further investigation, including: the influence of natural sources and anthropogenic activities on Mn within a given catchment, Mn speciation and transport in stratified and destratified lakes and reservoirs, and optimal site-specific EOA strategies for Mn mitigation.

Aeration↗

Connecting Minds: AI Use Cases to Bridge Power Systems and Large Language Models for Practical Applications

Recent advances in artificial intelligence (AI) and development of large language models (LLMs) present the opportunity to develop a new generation of power systems applications. In contrast with early power system AI applications based on structured numerical data, LLMs offer unique capabilities to perform logical reasoning using text documents, unstructured data, and application programming interface (API) calls to computational software. This paper seeks to bridge the knowledge gap between power systems engineers and LLM developers through a crosscutting explanation of use cases, characteristics, requirements, practical considerations from the perspectives of both LLM capabilities and industry needs. Specific focus is given to applications that can be realistically deployed by electric utilities. After introducing the architecture of LLMs and unique challenges of the power systems domain, this paper proposes twenty representative LLM applications grouped into categories of 1) power system operations, 2) asset management, 3) system planning and analytics, and 4) energy management and protection systems. Five use cases are presented within each category with descriptions of the motivation, objectives, approaches, example inputs / outputs, and benefits of each use case.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Boundary spanning increases knowledge and action on invasive species in a changing climate

Abstract Challenges associated with global change stressors on ecosystems have prompted calls to improve actionable science, including through boundary‐spanning activities, which aim to build connections and communication between researchers and natural resource practitioners. By synthesizing and translating research and practitioner knowledge, boundary‐spanning activities could support proactive, research‐informed conservation practice, but the success of these efforts is rarely evaluated. Using repeat survey data from the Northeast Regional Invasive Species and Climate Change (NE RISCC) Management Network, a boundary‐spanning organization, we evaluate whether participating in NE RISCC affected practitioners' knowledge, actions and priorities related to invasive species management under a changing climate. Our survey results suggest that practitioners who participate in NE RISCC have greater knowledge about invasive species and climate change and are incorporating climate change in more ways into their invasive species management. We also found NE RISCC membership affected the perceived usefulness of informational resources, with NE RISCC members more frequently identifying research syntheses and targeted workshops (both are common products used by NE RISCC to translate science into practice and share manager knowledge) as useful compared to non‐members. Practitioners who participate in NE RISCC also identified somewhat different research priorities, with non‐members and short‐term members more frequently identifying range‐shifting neonative species and their impacts on native communities as higher priorities compared to long‐term NE RISCC members. NE RISCC research activities and outreach materials have consistently framed range‐shifting neonative species as comparatively low risk, suggesting that this information has influenced practitioner's perception of risk. Practical implication : Although real‐world impacts of applied ecology are notoriously difficult to quantify, this analysis illustrates that if research results are actively translated, they can affect the knowledge and actions of natural resource practitioners. These impacts illustrate the potential for boundary‐spanning efforts to address other global change challenges to conservation.

Evans, Annette E.↗

Invasive Plant Species Management Plan for Los Alamos National Laboratory (Rev.3)

Native species are plants and animals that continually occupy a natural range without direct or indirect introduction and/or care by humans. They are adapted to the environmental conditions and processes of the ecosystem in which they reside. A species introduced into a novel ecosystem can either exploit that ecosystem and thrive or be unable to survive in that ecosystem (Hobbs et al. 2006). Alien or non-native species are species that are intentionally or accidentally introduced into a novel ecosystem and are capable of living and propagating within the physical parameters of that ecosystem. Invasive species is a species that is non-native (or alien) to the ecosystem under consideration and a noxious species are those whose introduction causes or is likely to cause economic or environmental harm. The term invasive species is applicable to plants and animals alike; however, this invasive species management plan currently focuses on invasive vegetation. Invasive plant species are usually capable of rapid colonization of disturbed ground, such as after a change in wildfire regime intensity and frequency (Reilly et al. 2020) or anthropogenic ground disturbance (Burke and Grime 1996; Hobbs and Huenneke 1992). Climate change facilitates the spread and establishment of many alien species and creates new opportunities for them to become invasive (Turbelin and Catford 2021). As climate change impacts increase in the coming decades, we may see in an increase in invasive species establishment. See a list of definitions of terms pertinent to this document in Appendix A: Definitions. Los Alamos National Laboratory (LANL) hosts populations of non-native and invasive species all typical of the northern New Mexico region (Martin 2004; NMDA 2020). By implementing an invasive species management plan, LANL will have readily accessible management strategies for invasive species that are found on-site. The benefits of managing invasive species include a decrease in wildland fire risks, an increase in soil productivity, an increase in (productive or beneficial) wildlife habitat, an increase in water quantity and quality, and the restoration of impacted areas (Burke and Grime 1996; Hobbs and Huenneke 1992; D’Antonio and Hobbie 2005; MacDougall et al. 2013; Reilly et al. 2020). The aforementioned benefits from invasive species management directly enable the LANL mission by ensuring compliance requirements are met and site-wide programs, such as the Vulnerability Assessment and Resilience Plan, are supported for a mutually beneficial outcome. An example for the LANL site specifically, controlling non-native annual plant species, for example, could reduce the costs associated with stabilizing soils during the stormwater pollution prevention compliance process. Roadway and utility right-of-way areas are another place where an integrated vegetation management strategy would promote low growing perennial plants in a way that is mutually beneficial to habitat and the institution through lowered maintenance costs. There is also an economic benefit to managing invasive species. In one nationwide study, invasive plants had an estimated impact cost of $190.45 billion (Fantel-Lepczyk et al. 2022). Investing in preventative measures and surveillance could help to offset future control and management costs of invasive species that have the potential to become established. The State of New Mexico has developed plant species lists and recommendations through the New Mexico Department of Agriculture’s Noxious Weeds Management Act, Article 7D (NM Statute § 76-7D-4 2021); however, effective invasive species management must rely on local knowledge of the site and region. Los Alamos County (LAC) has already compiled a target invasive plant species list and species-specific management objectives (Martin 2004). Therefore, the New Mexico Noxious Weed List and the LAC invasive plant species list, as well as management objectives from those documents, are integrated into LANL’s invasive plant species management plan.

54 ENVIRONMENTAL SCIENCES↗

A change language for ontologies and knowledge graphs

Ontologies and knowledge graphs (KGs) are general-purpose computable representations of some domain, such as human anatomy, and are frequently a crucial part of modern information systems. Most of these structures change over time, incorporating new knowledge or information that was previously missing. Managing these changes is a challenge, both in terms of communicating changes to users and providing mechanisms to make it easier for multiple stakeholders to contribute. To fill that need, we have created KGCL, the Knowledge Graph Change Language (https://github.com/INCATools/kgcl), a standard data model for describing changes to KGs and ontologies at a high level, and an accompanying human-readable Controlled Natural Language (CNL). This language serves two purposes: a curator can use it to request desired changes, and it can also be used to describe changes that have already happened, corresponding to the concepts of “apply patch” and “diff” commonly used for managing changes in text documents and computer programs. Another key feature of KGCL is that descriptions are at a high enough level to be useful and understood by a variety of stakeholders—e.g. ontology edits can be specified by commands like “add synonym ‘arm’ to ‘forelimb’” or “move ‘Parkinson disease’ under ‘neurodegenerative disease’.” We have also built a suite of tools for managing ontology changes. These include an automated agent that integrates with and monitors GitHub ontology repositories and applies any requested changes and a new component in the BioPortal ontology resource that allows users to make change requests directly from within the BioPortal user interface. Overall, the KGCL data model, its CNL, and associated tooling allow for easier management and processing of changes associated with the development of ontologies and KGs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗